ST / Mbed OS mbed-os-example-client-IKS01Ax

mbedOS client example, modified to push X-Nucleo-IKS01A1/2 Environmental Sensor data to mbed Cloud Connector.

Dependencies:   X_NUCLEO_IKS01A1 X_NUCLEO_IKS01A2

The application is derived from the official mbedOS client example (link) and has been tested using a X-NUCLEO-IKS01A2 (default) or a X-NUCLEO-IKS01A1 motion and environmental sensors expansion board connected to a ST NUCLEO-F429ZI platform.
The following steps should be performed to make the application work:

  • Register and login into ARM mbed Connector.
  • Replace the default and empty security.h file with the one associated with your account and provided by the Connector (Security Credentials menu).
  • In order to use X-NUCLEO-IKS01A1 instead of default X-NUCLEO-IKS02A1 comment out the IKS01A2 macro definition in main.cpp file.
  • Choose NUCLEO-F429ZI as a target either from online compiler or from CLI, compile and flash.
  • Connect the board to your ethernet network, open a serial terminal (params 115200N1) and wait that the client is connected to the mbed Connector.
  • Press user button to start acquiring and pushing the environmental (pressure, temperature and humidity) data.

Note: environmental data are expressed using IPSO representation based on OMA LWM2M standard.

Diff: security.h

Revision:
0:003e60a0deb8
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/security.h	Wed Apr 26 18:23:56 2017 +0200
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2015 ARM Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef __SECURITY_H__
+#define __SECURITY_H__
+ 
+#include <inttypes.h>
+ 
+#define MBED_DOMAIN "DOMAIN"
+#define MBED_ENDPOINT_NAME "ENDPOINT_NAME"
+ 
+const uint8_t SERVER_CERT[] = "-----BEGIN CERTIFICATE-----\r\n"
+"-----END CERTIFICATE-----\r\n";
+ 
+const uint8_t CERT[] = "-----BEGIN CERTIFICATE-----\r\n"
+"-----END CERTIFICATE-----\r\n";
+ 
+const uint8_t KEY[] = "-----BEGIN PRIVATE KEY-----\r\n"
+"-----END PRIVATE KEY-----\r\n";
+ 
+#endif //__SECURITY_H__
+ 
+#error "You need to get security.h credentials from connector.mbed.com and replace the content of this security.h file"