ST
mbedOS client example, modified to push X-Nucleo-IKS01A1/2 Environmental Sensor data to mbed Cloud Connector.
Dependencies: X_NUCLEO_IKS01A1 X_NUCLEO_IKS01A2
The application is derived from the official mbedOS client example (link) and has been tested using a X-NUCLEO-IKS01A2 (default) or a X-NUCLEO-IKS01A1 motion and environmental sensors expansion board connected to a ST NUCLEO-F429ZI platform.
The following steps should be performed to make the application work:
- Register and login into ARM mbed Connector.
- Replace the default and empty security.h file with the one associated with your account and provided by the Connector (Security Credentials menu).
- In order to use X-NUCLEO-IKS01A1 instead of default X-NUCLEO-IKS02A1 comment out the IKS01A2 macro definition in main.cpp file.
- Choose NUCLEO-F429ZI as a target either from online compiler or from CLI, compile and flash.
- Connect the board to your ethernet network, open a serial terminal (params 115200N1) and wait that the client is connected to the mbed Connector.
- Press user button to start acquiring and pushing the environmental (pressure, temperature and humidity) data.
Note: environmental data are expressed using IPSO representation based on OMA LWM2M standard.
Diff: mbed_app.json
- Revision:
- 0:003e60a0deb8
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app.json Wed Apr 26 18:23:56 2017 +0200
@@ -0,0 +1,50 @@
+{
+ "config": {
+ "network-interface":{
+ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
+ "value": "ETHERNET"
+ },
+ "mesh_radio_type": {
+ "help": "options are ATMEL, MCR20, SPIRIT1",
+ "value": "ATMEL"
+ },
+ "wifi-ssid": {
+ "help": "WiFi SSID",
+ "value": "\"SSID\""
+ },
+ "wifi-password": {
+ "help": "WiFi Password",
+ "value": "\"Password\""
+ },
+ "wifi-tx": {
+ "help": "TX pin for serial connection to external device",
+ "value": "D1"
+ },
+ "wifi-rx": {
+ "help": "RX pin for serial connection to external device",
+ "value": "D0"
+ }
+ },
+ "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_mbed_client_config.h\""],
+ "target_overrides": {
+ "*": {
+ "target.features_add": ["NANOSTACK", "LOWPAN_ROUTER", "COMMON_PAL"],
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
+ "mbed-mesh-api.6lowpan-nd-channel-page": 0,
+ "mbed-mesh-api.6lowpan-nd-channel": 12,
+ "mbed-trace.enable": 0
+ },
+ "NUCLEO_F401RE": {
+ "wifi-tx": "PA_11",
+ "wifi-rx": "PA_12"
+ },
+ "NUCLEO_F411RE": {
+ "wifi-tx": "PA_11",
+ "wifi-rx": "PA_12"
+ },
+ "UBLOX_EVK_ODIN_W2": {
+ "target.device_has_remove": ["EMAC"]
+ }
+ }
+}