ST / X_NUCLEO_LED61A1

Library to handle the X-NUCLEO-LED61A1 LED Control Expansion Board based on the LED6001 component.

Dependents:   LedDimming_LED61A1_mbedOS HelloWorld_LED61A1_mbedOS LedDimming_LED61A1 HelloWorld_LED61A1 ... more

Fork of X_NUCLEO_LED61A1 by ST Expansion SW Team

LED Control Library

Library to handle the X-NUCLEO-LED61A1 LED Control Expansion Board based on the LED6001 component.

Platform compatibility

  • NUCLEO boards have been tested with the default configuration provided by the HelloWorld_LED61A1 example.
  • NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC boards have been tested with the following patch:
    • to connect with a wire the NUCLEO’s D9 pin to the LED61A1’s D6 pin;
    • to initialize the pwm PinName variable with D9 rather than D6.
  • NUCLEO-F302R8 board has been tested with the following patch:
    • to connect with a wire the NUCLEO’s D7 pin to the LED61A1’s D6 pin;
    • to initialize the pwm PinName variable with D7 rather than D6.
  • LPCXpresso11U68 board has been tested with the limitation of using only the PWM Dimming, as it provides only one PWM channel, thus allowing just one between the PWM or Analog Dimming functionalities. It has been tested with the following patch:
    • to connect with a wire the LPCX’s D3 pin to the LED61A1’s D4 pin;
    • to connect with a wire the LPCX’s D4 pin to the LED61A1’s D6 pin;
    • to initialize the xfault_irq PinName variable with D3 rather than D4;
    • to initialize the pwm PinName variable with D4 rather than D6;
    • to initialize the analog PinName variable with NC rather than D5;
    • to disable the use of the user button in any application example as it is not available.
  • FRDM-K64F board has been tested with the following patch:
    • to disable the use of the user button in any application example as it is not available.

Components/Interfaces/Component.h

Committer:
Davidroid
Date:
2017-05-08
Revision:
13:8cd869d64965
Parent:
12:fc2d2d3a2499

File content as of revision 13:8cd869d64965:

/**
 ******************************************************************************
 * @file    Component.h
 * @author  AST
 * @version V1.0.0
 * @date    April 13th, 2015
 * @brief   This file contains the abstract class describing the interface of a
 *          generic component.
 ******************************************************************************
 * @attention
 *
 * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *   1. Redistributions of source code must retain the above copyright notice,
 *      this list of conditions and the following disclaimer.
 *   2. Redistributions in binary form must reproduce the above copyright notice,
 *      this list of conditions and the following disclaimer in the documentation
 *      and/or other materials provided with the distribution.
 *   3. Neither the name of STMicroelectronics nor the names of its contributors
 *      may be used to endorse or promote products derived from this software
 *      without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ******************************************************************************
 */


/* Define to prevent recursive inclusion -------------------------------------*/

#ifndef __COMPONENT_CLASS_H
#define __COMPONENT_CLASS_H


/* Includes ------------------------------------------------------------------*/

#include <stdint.h>


/* Classes  ------------------------------------------------------------------*/

/**
 * An abstract class for Generic components.
 */
class Component {
public:

    /**
     * @brief     Initializing the component.
     * @param[in] init pointer to device specific initalization structure.
     * @retval    "0" in case of success, an error code otherwise.
     */
    virtual int init(void *init) = 0;

    /**
     * @brief      Getting the ID of the component.
     * @param[out] id pointer to an allocated variable to store the ID into.
     * @retval     "0" in case of success, an error code otherwise.
     */
    virtual int read_id(uint8_t *id) = 0;

    /**
     * @brief Destructor.
     */
    virtual ~Component() {};
};

#endif /* __COMPONENT_CLASS_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/