ST
mbed library for STMicroelectronics' X-NUCLEO-IKA01A1 expansion board.
Dependents: HelloWorld_IKA01A1
Fork of
X_NUCLEO_IKA01A1
by 
ST Expansion SW Team
Library for STMicroelectronics' X-NUCLEO-IKA01A1 multifunctional expansion board based on operational amplifiers.
Components/TSU104/TSU104.h
- Committer:
- Davidroid
- Date:
- 2017-07-13
- Revision:
- 23:807f66b435d6
- Parent:
- 22:ff8d071bf79e
File content as of revision 23:807f66b435d6:
/**
******************************************************************************
* @file TSU104.h
* @author Central Labs
* @version 1.0.0
* @date 11-February-2016
* @brief Portable architecture for TSU104
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Generated with STM32CubeTOO -----------------------------------------------*/
/* Revision ------------------------------------------------------------------*/
/*
Repository: http://svn.x-nucleodev.codex.cro.st.com/svnroot/X-NucleoDev
Branch/Trunk/Tag: trunk
Based on: X-CUBE-IKA01A1/trunk/Drivers/BSP/Components/tsu104/tsu104.h
Revision: 402
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __TSU104_CLASS_H
#define __TSU104_CLASS_H
/* Includes ------------------------------------------------------------------*/
/* ACTION 1 ------------------------------------------------------------------*
* Include here platform specific header files. *
*----------------------------------------------------------------------------*/
#include "mbed.h"
/* ACTION 2 ------------------------------------------------------------------*
* Include here component specific header files. *
*----------------------------------------------------------------------------*/
#include "TSU104_def.h"
/* ACTION 3 ------------------------------------------------------------------*
* Include here interface specific header files. *
* *
* Example: *
* #include "HumiditySensor.h" *
* #include "TemperatureSensor.h" *
*----------------------------------------------------------------------------*/
#include "../Interfaces/Windcomp.h"
#include "../Interfaces/PhotoSensor.h"
/* Classes -------------------------------------------------------------------*/
/**
* @brief Class representing a TSU104 operational amplifier component. The window comparator
* configuration allows the user to compare a signal to two threshold voltages. When the signal
* is out of the required voltage range, the output of the operational amplifier toggles
*/
class TSU104 : public Windcomp, public PhotoSensor
{
public:
/*** Constructor and Destructor Methods ***/
/**
* @brief Constructor.
*/
TSU104(PinName photoSensorPin, PinName windCmpSignalPin_1,PinName windCmpSignalPin_2) : Windcomp()
{
photo_sensor_pin = photoSensorPin;
windCmp_signal_pin_1 = windCmpSignalPin_1;
windCmp_signal_pin_2 = windCmpSignalPin_2;
}
/**
* @brief Destructor.
*/
virtual ~TSU104(void) {}
/*** Public Component Related Methods ***/
/* ACTION 5 --------------------------------------------------------------*
* Implement here the component's public methods, as wrappers of the C *
* component's functions. *
* They should be: *
* + Methods with the same name of the C component's virtual table's *
* functions (1); *
* + Methods with the same name of the C component's extended virtual *
* table's functions, if any (2). *
* *
* Example: *
* virtual int get_value(float *p_data) //(1) *
* { *
* return COMPONENT_get_value(float *pf_data); *
* } *
* *
* virtual int enable_feature(void) //(2) *
* { *
* return COMPONENT_enable_feature(); *
* } *
*------------------------------------------------------------------------*/
/**
* @brief Public functions inherited from the Component Class
*/
/**
* @brief initialize the class for TSU104 operational amplifier component
* @retval COMPONENT_OK if initialization is successfull
* @retval suitable error code otherwise
*/
virtual int init(void *init = NULL)
{
return (int) TSU104_Init((void *) init);
}
/**
* @brief obtain component ID for TSU104 perational amplifier
* @retval component ID for TSU104 operational amplifier
*/
virtual int read_id(uint8_t *id = NULL)
{
return (int) TSU104_ReadID((uint8_t *) id);
}
/**
* @brief Public functions inherited from the LedDriver Class
*/
/**
* @brief get digital signal value 1 in windows comparator configuration
* @retval digital signal value 1
*/
virtual unsigned int get_signal1(void)
{
DigitalIn windowsCompD2(windCmp_signal_pin_1);
return windowsCompD2.read();
}
/**
* @brief get digital signal value 2 in windows comparator configuration
* @retval digital signal value 2
*/
virtual unsigned int get_signal2(void)
{
DigitalIn windowsCompD4(windCmp_signal_pin_2);
return windowsCompD4.read();
}
/**
* @brief obtain the output voltage detected by photo sensor
* @param pin AnalogIn pin to use for detecting the voltage
* @retval voltage detected by photo sensor
*/
virtual unsigned int get_voltage(void)
{
AnalogIn photoSensor(photo_sensor_pin);
double voltage = photoSensor.read();
voltage = voltage*3.3*1000.0; // voltage in mV
return voltage;
}
/*** Public Interrupt Related Methods ***/
/* ACTION 6 --------------------------------------------------------------*
* Implement here interrupt related methods, if any. *
* Note that interrupt handling is platform dependent, e.g.: *
* + mbed: *
* InterruptIn feature_irq(pin); //Interrupt object. *
* feature_irq.fall(callback); //Attach a callback. *
* feature_irq.mode(PullNone); //Set interrupt mode. *
* feature_irq.enable_irq(); //Enable interrupt. *
* feature_irq.disable_irq(); //Disable interrupt. *
* + Arduino: *
* attachInterrupt(pin, callback, RISING); //Attach a callback. *
* detachInterrupt(pin); //Detach a callback. *
* *
* Example (mbed): *
* void attach_feature_irq(void (*fptr) (void)) *
* { *
* feature_irq.rise(fptr); *
* } *
* *
* void enable_feature_irq(void) *
* { *
* feature_irq.enable_irq(); *
* } *
* *
* void disable_feature_irq(void) *
* { *
* feature_irq.disable_irq(); *
* } *
*------------------------------------------------------------------------*/
protected:
/*** Protected Component Related Methods ***/
/**
* arduino pin for photosensor output voltage
*/
PinName photo_sensor_pin;
/**
* arduino pin for signal 1 of windows comparator configuration
*/
PinName windCmp_signal_pin_1;
/**
* arduino pin for signal 1 of windows comparator configuration
*/
PinName windCmp_signal_pin_2;
/* ACTION 7 --------------------------------------------------------------*
* Declare here the component's specific methods. *
* They should be: *
* + Methods with the same name of the C component's virtual table's *
* functions (1); *
* + Methods with the same name of the C component's extended virtual *
* table's functions, if any (2); *
* + Helper methods, if any, like functions declared in the component's *
* source files but not pointed by the component's virtual table (3). *
* *
* Example: *
* status_t COMPONENT_get_value(float *f); //(1) *
* status_t COMPONENT_enable_feature(void); //(2) *
* status_t COMPONENT_compute_average(void); //(3) *
*------------------------------------------------------------------------*/
/* TSU104's generic functions. */
status_t TSU104_Init(void *init);
status_t TSU104_ReadID(void *id);
/* TSU104's interrupts related functions. */
status_t TSU104_ConfigIT(void* a);
/*** Component's I/O Methods ***/
/*** Component's Instance Variables ***/
/* ACTION 9 --------------------------------------------------------------*
* Declare here interrupt related variables, if needed. *
* Note that interrupt handling is platform dependent, see *
* "Interrupt Related Methods" above. *
* *
* Example: *
* + mbed: *
* InterruptIn feature_irq; *
*------------------------------------------------------------------------*/
/* ACTION 10 -------------------------------------------------------------*
* Declare here other pin related variables, if needed. *
* *
* Example: *
* + mbed: *
* DigitalOut standby_reset; *
*------------------------------------------------------------------------*/
/* ACTION 11 -------------------------------------------------------------*
* Declare here communication related variables, if needed. *
* *
* Example: *
* + mbed: *
* DigitalOut address; *
* DevI2C &dev_i2c; *
*------------------------------------------------------------------------*/
/* ACTION 12 -------------------------------------------------------------*
* Declare here identity related variables, if needed. *
* Note that there should be only a unique identifier for each component, *
* which should be the "who_am_i" parameter. *
*------------------------------------------------------------------------*/
/* Identity */
uint8_t who_am_i;
/* ACTION 13 -------------------------------------------------------------*
* Declare here the component's static and non-static data, one variable *
* per line. *
* *
* Example: *
* float measure; *
* int instance_id; *
* static int number_of_instances; *
*------------------------------------------------------------------------*/
};
#endif /* __TSU104_CLASS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
X-NUCLEO-IKA01A1 Multifunctional board based on operational amplifiers.