mbed library for STMicroelectronics' X-NUCLEO-IKA01A1 expansion board.

Dependents:   HelloWorld_IKA01A1

Fork of X_NUCLEO_IKA01A1 by ST Expansion SW Team

Library for STMicroelectronics' X-NUCLEO-IKA01A1 multifunctional expansion board based on operational amplifiers.

Revision:
2:19d1dcef0c0e
Child:
3:997327f69b10
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/tsv734/tsv734_class.h	Wed Mar 02 12:58:02 2016 +0000
@@ -0,0 +1,271 @@
+/**
+ ******************************************************************************
+ * @file    TSV734.c
+ * @author  Central Labs
+ * @version 1.0.0
+ * @date    11-February-2016
+ * @brief   Portable architecture for TSV734
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Generated with STM32CubeTOO -----------------------------------------------*/
+
+
+/* Revision ------------------------------------------------------------------*/
+/*
+	Repository:       http://svn.x-nucleodev.codex.cro.st.com/svnroot/X-NucleoDev
+	Branch/Trunk/Tag: trunk
+	Based on:         X-CUBE-IKA01A1/trunk/Drivers/BSP/Components/tsv734/tsv734.h
+	Revision:         402
+*/
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef __TSV734_CLASS_H
+#define __TSV734_CLASS_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+/* ACTION 1 ------------------------------------------------------------------*
+ * Include here platform specific header files.                               *
+ *----------------------------------------------------------------------------*/		
+#include "mbed.h"
+/* ACTION 2 ------------------------------------------------------------------*
+ * Include here component specific header files.                              *
+ *----------------------------------------------------------------------------*/		
+#include "tsv734.h"
+/* ACTION 3 ------------------------------------------------------------------*
+ * Include here interface specific header files.                              *
+ *                                                                            *
+ * Example:                                                                   *
+ *   #include "../Interfaces/Humidity_class.h"                                *
+ *   #include "../Interfaces/Temperature_class.h"                             *
+ *----------------------------------------------------------------------------*/
+#include "../Interfaces/Led_driver_class.h"
+
+
+/* Classes -------------------------------------------------------------------*/
+
+/**
+ * @brief Class representing a TSV734 component.
+ */
+class TSV734 : public Led_driver
+{
+public:
+
+	/*** Constructor and Destructor Methods ***/
+
+	/**
+	 * @brief Constructor.
+	 */
+	TSV734(void) : Led_driver()
+	{
+		/* ACTION 4 ----------------------------------------------------------*
+		 * Initialize here the component's member variables, one variable per *
+		 * line.                                                              *
+		 *                                                                    *
+		 * Example:                                                           *
+		 *   measure = 0;                                                     *
+		 *   instance_id = number_of_instances++;                             *
+		 *--------------------------------------------------------------------*/
+	}
+	
+	/**
+	 * @brief Destructor.
+	 */
+	virtual ~TSV734(void) {}
+	
+
+	/*** Public Component Related Methods ***/
+
+	/* ACTION 5 --------------------------------------------------------------*
+	 * Implement here the component's public methods, as wrappers of the C    *
+	 * component's functions.                                                 *
+	 * They should be:                                                        *
+	 *   + Methods with the same name of the C component's virtual table's    *
+	 *     functions (1);                                                     *
+	 *   + Methods with the same name of the C component's extended virtual   *
+	 *     table's functions, if any (2).                                     *
+	 *                                                                        *
+	 * Example:                                                               *
+	 *   virtual int GetValue(float *f)  //(1)                                *
+	 *   {                                                                    *
+	 *     return COMPONENT_GetValue(float *f);                               *
+	 *   }                                                                    *
+	 *                                                                        *
+	 *   virtual int EnableFeature(void) //(2)                                *
+	 *   {                                                                    *
+	 *     return COMPONENT_EnableFeature();                                  *
+	 *   }                                                                    *
+	 *------------------------------------------------------------------------*/
+	virtual int Init(void *init = NULL)
+	{
+		return (int) TSV734_Init((void *) init);
+	}
+
+	virtual int ReadID(uint8_t *id = NULL)
+	{
+		return (int) TSV734_ReadID((uint8_t *) id);
+	}
+
+	virtual int SetDutyCycle(float dc)
+	{
+		return (int) TSV734_SetDutyCycle((float) dc);
+	}
+
+
+	/*** Public Interrupt Related Methods ***/
+
+	/* ACTION 6 --------------------------------------------------------------*
+	 * Implement here interrupt related methods, if any.                      *
+	 * Note that interrupt handling is platform dependent, e.g.:              *
+	 *   + mbed:                                                              *
+	 *     InterruptIn feature_irq(pin);           //Interrupt object.        *
+	 *     feature_irq.fall(callback);             //Attach a callback.       *
+	 *     feature_irq.mode(PullNone);             //Set interrupt mode.      *
+	 *     feature_irq.enable_irq();               //Enable interrupt.        *
+	 *     feature_irq.disable_irq();              //Disable interrupt.       *
+	 *   + Arduino:                                                           *
+	 *     attachInterrupt(pin, callback, RISING); //Attach a callback.       *
+	 *     detachInterrupt(pin);                   //Detach a callback.       *
+	 *                                                                        *
+	 * Example (mbed):                                                        *
+	 *   void AttachFeatureIRQ(void (*fptr) (void))                           *
+	 *   {                                                                    *
+	 *     feature_irq.fall(fptr);                                            *
+	 *   }                                                                    *
+	 *                                                                        *
+	 *   void EnableFeatureIRQ(void)                                          *
+	 *   {                                                                    *
+	 *     feature_irq.enable_irq();                                          *
+	 *   }                                                                    *
+	 *                                                                        *
+	 *   void DisableFeatureIRQ(void)                                         *
+	 *   {                                                                    *
+	 *     feature_irq.disable_irq();                                         *
+	 *   }                                                                    *
+	 *------------------------------------------------------------------------*/
+
+
+protected:
+
+	/*** Protected Component Related Methods ***/
+
+	/* ACTION 7 --------------------------------------------------------------*
+	 * Declare here the component's specific methods.                         *
+	 * They should be:                                                        *
+	 *   + Methods with the same name of the C component's virtual table's    *
+	 *     functions (1);                                                     *
+	 *   + Methods with the same name of the C component's extended virtual   *
+	 *     table's functions, if any (2);                                     *
+	 *   + Helper methods, if any, like functions declared in the component's *
+	 *     source files but not pointed by the component's virtual table (3). *
+	 *                                                                        *
+	 * Example:                                                               *
+	 *   Status_t COMPONENT_GetValue(float *f);   //(1)                       *
+	 *   Status_t COMPONENT_EnableFeature(void);  //(2)                       *
+	 *   Status_t COMPONENT_ComputeAverage(void); //(3)                       *
+	 *------------------------------------------------------------------------*/
+	/* TSV734's generic functions. */
+	Status_t TSV734_Init(void *init);
+	Status_t TSV734_ReadID(void *id);
+
+	/* TSV734's interrupts related functions. */
+	Status_t TSV734_ConfigIT(void* a);
+	Status_t TSV734_SetDutyCycle(float dutyCycle);
+
+
+	/*** Component's I/O Methods ***/
+
+	/* ACTION 8 --------------------------------------------------------------*
+	 * Implement here other I/O methods beyond those already implemented      *
+	 * above, which are declared extern within the component's header file.   *
+	 *------------------------------------------------------------------------*/
+	Status_t TSV734_Write_Pin_D3(unsigned int dc)
+	{
+		/* TO BE IMPLEMENTED BY USING TARGET PLATFORM'S APIs. */
+		return (Status_t) 0;
+	}
+
+
+	/*** Component's Instance Variables ***/
+
+	/* ACTION 9 --------------------------------------------------------------*
+	 * Declare here interrupt related variables, if needed.                   *
+	 * Note that interrupt handling is platform dependent, see                *
+	 * "Interrupt Related Methods" above.                                     *
+	 *                                                                        *
+	 * Example:                                                               *
+	 *   + mbed:                                                              *
+	 *     InterruptIn feature_irq;                                           *
+	 *------------------------------------------------------------------------*/
+
+	/* ACTION 10 -------------------------------------------------------------*
+	 * Declare here other pin related variables, if needed.                   *
+	 *                                                                        *
+	 * Example:                                                               *
+	 *   + mbed:                                                              *
+	 *     DigitalOut standby_reset;                                          *
+	 *------------------------------------------------------------------------*/
+
+	/* ACTION 11 -------------------------------------------------------------*
+	 * Declare here communication related variables, if needed.               *
+	 *                                                                        *
+	 * Example:                                                               *
+	 *   + mbed:                                                              *
+	 *     DigitalOut address;                                                *
+	 *     DevI2C &dev_i2c;                                                   *
+	 *------------------------------------------------------------------------*/
+
+	/* ACTION 12 -------------------------------------------------------------*
+	 * Declare here identity related variables, if needed.                    *
+	 * Note that there should be only a unique identifier for each component, *
+	 * which should be the "who_am_i" parameter.                              *
+	 *------------------------------------------------------------------------*/
+	/* Identity */
+	uint8_t who_am_i;
+
+	/* ACTION 13 -------------------------------------------------------------*
+	 * Declare here the component's static and non-static data, one variable  *
+	 * per line.                                                              *
+	 *                                                                        *
+	 * Example:                                                               *
+	 *   float measure;                                                       *
+	 *   int instance_id;                                                     *
+	 *   static int number_of_instances;                                      *
+	 *------------------------------------------------------------------------*/
+};
+
+#endif /* __TSV734_CLASS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
\ No newline at end of file