Library to handle the X-NUCLEO-IHM01A1 Motor Control Expansion Board based on the L6474 component.
Dependencies: X_NUCLEO_COMMON ST_INTERFACES
Dependents: Stepper_Matlab_Control SunTracker_BLE Stepper_Matlab_Control MemsMotorControl ... more
Fork of X_NUCLEO_IHM01A1 by
Motor Control Library
Introduction
Library to handle the X-NUCLEO-IHM01A1 Motor Control Expansion Board based on the the L6474 component.
Daisy-Chain Configuration
This board can be stacked up to three times so that the L6474 components will be connected in daisy-chain configuration. For this purpose, some resistors must be correctly connected on the boards as depicted here below:
Platform compatibility
- NUCLEO boards have been tested with the default configuration provided by the HelloWorld_IHM01A1 example.
- LPCXpresso11U68 board has been tested with the following patch:
- to connect with a wire from the LPCX’s
D4
pin to the IHM01A1’sD9
pin; - to initialize the pwm PinName variable with
D4
rather thanD9
.
- to connect with a wire from the LPCX’s
- FRDM-K64F board has been tested with the following patch:
- to connect with a wire from the FRDM’s
D4
pin to the IHM01A1’sD8
pin; - to initialize the standby_reset PinName variable with
D4
rather thanD8
.
- to connect with a wire from the FRDM’s
Example Applications
- HelloWorld_IHM01A1
- HelloWorld_IHM01A1_2Motors
- MotorControl_IHM01A1
- MemsMotorControl
- MemsMotorControl_IHM01A1_IKS01A2
Files at revision 35:974ca699c792
Name | Size | Actions |
---|---|---|
[up] | ||
component_def.h | 3697 | Revisions Annotate |
motor_def.h | 13698 | Revisions Annotate |