ST
VL53L1X sensor class, for ARM Mbed platform. Based on Ultra-lite, Mass-market C Driver.
Dependencies: X_NUCLEO_COMMON ST_INTERFACES
Diff: vl53l1x_class.cpp
- Revision:
- 5:f16727052990
- Child:
- 6:aa13392d16bb
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/vl53l1x_class.cpp Mon Jan 28 10:14:03 2019 +0000
@@ -0,0 +1,1074 @@
+/**
+ ******************************************************************************
+ * @file vl53l1x_class.cpp
+ * @author JS
+ * @version V0.0.1
+ * @date 15-January-2019
+ * @brief Implementation file for the VL53L1 sensor component driver class
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes */
+#include <stdlib.h>
+#include "vl53l1x_class.h"
+
+
+#define ALGO__PART_TO_PART_RANGE_OFFSET_MM 0x001E
+#define MM_CONFIG__INNER_OFFSET_MM 0x0020
+#define MM_CONFIG__OUTER_OFFSET_MM 0x0022
+
+#include "vl53l1x_configuration.h"
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetSWVersion(VL53L1X_Version_t *pVersion)
+{
+ VL53L1X_ERROR Status = 0;
+
+ pVersion->major = VL53L1X_IMPLEMENTATION_VER_MAJOR;
+ pVersion->minor = VL53L1X_IMPLEMENTATION_VER_MINOR;
+ pVersion->build = VL53L1X_IMPLEMENTATION_VER_SUB;
+ pVersion->revision = VL53L1X_IMPLEMENTATION_VER_REVISION;
+ return Status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetI2CAddress(uint8_t new_address)
+{
+ VL53L1X_ERROR status = 0;
+
+ Device->I2cDevAddr = new_address;
+ status = VL53L1_WrByte(Device, VL53L1_I2C_SLAVE__DEVICE_ADDRESS, new_address >> 1);
+ return status;
+}
+
+int VL53L1X::init_sensor(uint8_t new_addr)
+{
+ Device->I2cDevAddr = new_addr;
+ int status = 0;
+ VL53L1_Off();
+ VL53L1_On();
+
+ status = is_present();
+ if (!status) {
+ printf("Failed to init VL53L0X sensor!\n\r");
+ return status;
+ }
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SensorInit()
+{
+ VL53L1X_ERROR status = 0;
+ uint8_t Addr = 0x00;
+
+ for (Addr = 0x2D; Addr <= 0x87; Addr++){
+ status = VL53L1_WrByte(Device, Addr, VL51L1X_DEFAULT_CONFIGURATION[Addr - 0x2D]);
+ if (status != 0)
+ {
+ printf("Writing config failed - %d\r\n", status);
+ }
+ }
+
+ uint16_t sensorID= 0;
+ status = VL53L1X_GetSensorId(&sensorID);
+ printf("Sensor id is - %d (%X)\r\n", sensorID, sensorID);
+
+ status = VL53L1X_StartRanging();
+ if (status != 0)
+ {
+ printf("start ranging failed - %d\r\n", status);
+ }
+
+ status = VL53L1X_ClearInterrupt();
+ status = VL53L1X_StopRanging();
+ status = VL53L1_WrByte(Device, VL53L1_VHV_CONFIG__TIMEOUT_MACROP_LOOP_BOUND, 0x09); /* two bounds VHV */
+ status = VL53L1_WrByte(Device, 0x0B, 0); /* start VHV from the previous temperature */
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_ClearInterrupt()
+{
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1_WrByte(Device, SYSTEM__INTERRUPT_CLEAR, 0x01);
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetInterruptPolarity(uint8_t NewPolarity)
+{
+ uint8_t Temp;
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1_RdByte(Device, GPIO_HV_MUX__CTRL, &Temp);
+ Temp = Temp & 0xEF;
+ status = VL53L1_WrByte(Device, GPIO_HV_MUX__CTRL, Temp | (!(NewPolarity & 1)) << 4);
+ return status;
+}
+
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetInterruptPolarity(uint8_t *pInterruptPolarity)
+{
+ uint8_t Temp;
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1_RdByte(Device, GPIO_HV_MUX__CTRL, &Temp);
+ Temp = Temp & 0x10;
+ *pInterruptPolarity = !(Temp>>4);
+ return status;
+}
+
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_StartRanging()
+{
+ VL53L1X_ERROR status = 0;
+/*
+ uint8_t Addr = 0x00;
+
+ for (Addr = 0x2D; Addr <= 0x87; Addr++){
+ status = VL53L1_WrByte(Device, Addr, VL51L1X_DEFAULT_CONFIGURATION[Addr - 0x2D]);
+ }
+*/
+ status = VL53L1_WrByte(Device, SYSTEM__MODE_START, 0x40); /* Enable VL53L1X */
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_StopRanging()
+{
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1_WrByte(Device, SYSTEM__MODE_START, 0x00); /* Disable VL53L1X */
+ return status;
+}
+
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_CheckForDataReady(uint8_t *isDataReady)
+{
+ uint8_t Temp;
+ uint8_t IntPol;
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1X_GetInterruptPolarity(&IntPol);
+ status = VL53L1_RdByte(Device, GPIO__TIO_HV_STATUS, &Temp);
+ /* Read in the register to check if a new value is available */
+ if (status == 0){
+ if ((Temp & 1) == IntPol)
+ *isDataReady = 1;
+ else
+ *isDataReady = 0;
+ }
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetTimingBudgetInMs(uint16_t TimingBudgetInMs)
+{
+ uint16_t DM;
+ VL53L1X_ERROR status=0;
+
+ status = VL53L1X_GetDistanceMode(&DM);
+ if (DM == 0)
+ return 1;
+ else if (DM == 1) { /* Short DistanceMode */
+ switch (TimingBudgetInMs) {
+ case 15: /* only available in short distance mode */
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x01D);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x0027);
+ break;
+ case 20:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x0051);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x006E);
+ break;
+ case 33:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x00D6);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x006E);
+ break;
+ case 50:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x1AE);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x01E8);
+ break;
+ case 100:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x02E1);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x0388);
+ break;
+ case 200:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x03E1);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x0496);
+ break;
+ case 500:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x0591);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x05C1);
+ break;
+ default:
+ status = 1;
+ break;
+ }
+ } else {
+ switch (TimingBudgetInMs) {
+ case 20:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x001E);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x0022);
+ break;
+ case 33:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x0060);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x006E);
+ break;
+ case 50:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x00AD);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x00C6);
+ break;
+ case 100:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x01CC);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x01EA);
+ break;
+ case 200:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x02D9);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x02F8);
+ break;
+ case 500:
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI,
+ 0x048F);
+ VL53L1_WrWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_B_HI,
+ 0x04A4);
+ break;
+ default:
+ status = 1;
+ break;
+ }
+ }
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetTimingBudgetInMs(uint16_t *pTimingBudget)
+{
+ uint16_t Temp;
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1_RdWord(Device, RANGE_CONFIG__TIMEOUT_MACROP_A_HI, &Temp);
+ switch (Temp) {
+ case 0x001D :
+ *pTimingBudget = 15;
+ break;
+ case 0x0051 :
+ case 0x001E :
+ *pTimingBudget = 20;
+ break;
+ case 0x00D6 :
+ case 0x0060 :
+ *pTimingBudget = 33;
+ break;
+ case 0x1AE :
+ case 0x00AD :
+ *pTimingBudget = 50;
+ break;
+ case 0x02E1 :
+ case 0x01CC :
+ *pTimingBudget = 100;
+ break;
+ case 0x03E1 :
+ case 0x02D9 :
+ *pTimingBudget = 200;
+ break;
+ case 0x0591 :
+ case 0x048F :
+ *pTimingBudget = 500;
+ break;
+ default:
+ *pTimingBudget = 0;
+ break;
+ }
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetDistanceMode(uint16_t DM)
+{
+ uint16_t TB;
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1X_GetTimingBudgetInMs(&TB);
+
+
+ switch (DM) {
+ case 1:
+ status = VL53L1_WrByte(Device, PHASECAL_CONFIG__TIMEOUT_MACROP, 0x14);
+ status = VL53L1_WrByte(Device, RANGE_CONFIG__VCSEL_PERIOD_A, 0x07);
+ status = VL53L1_WrByte(Device, RANGE_CONFIG__VCSEL_PERIOD_B, 0x05);
+ status = VL53L1_WrByte(Device, RANGE_CONFIG__VALID_PHASE_HIGH, 0x38);
+ status = VL53L1_WrWord(Device, SD_CONFIG__WOI_SD0, 0x0705);
+ status = VL53L1_WrWord(Device, SD_CONFIG__INITIAL_PHASE_SD0, 0x0606);
+ break;
+ case 2:
+ status = VL53L1_WrByte(Device, PHASECAL_CONFIG__TIMEOUT_MACROP, 0x0A);
+ status = VL53L1_WrByte(Device, RANGE_CONFIG__VCSEL_PERIOD_A, 0x0F);
+ status = VL53L1_WrByte(Device, RANGE_CONFIG__VCSEL_PERIOD_B, 0x0D);
+ status = VL53L1_WrByte(Device, RANGE_CONFIG__VALID_PHASE_HIGH, 0xB8);
+ status = VL53L1_WrWord(Device, SD_CONFIG__WOI_SD0, 0x0F0D);
+ status = VL53L1_WrWord(Device, SD_CONFIG__INITIAL_PHASE_SD0, 0x0E0E);
+ break;
+ default:
+ break;
+ }
+ status = VL53L1X_SetTimingBudgetInMs(TB);
+ return status;
+}
+
+
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetDistanceMode(uint16_t *DM)
+{
+ uint8_t TempDM, status=0;
+
+ status = VL53L1_RdByte(Device,PHASECAL_CONFIG__TIMEOUT_MACROP, &TempDM);
+ if (TempDM == 0x14)
+ *DM=1;
+ if(TempDM == 0x0A)
+ *DM=2;
+ return status;
+}
+
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetInterMeasurementInMs(uint16_t InterMeasMs)
+{
+ uint16_t ClockPLL;
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1_RdWord(Device, VL53L1_RESULT__OSC_CALIBRATE_VAL, &ClockPLL);
+ ClockPLL = ClockPLL&0x3FF;
+ VL53L1_WrDWord(Device, VL53L1_SYSTEM__INTERMEASUREMENT_PERIOD,
+ (uint32_t)(ClockPLL * InterMeasMs * 1.075));
+ return status;
+
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetInterMeasurementInMs(uint16_t *pIM)
+{
+ uint16_t ClockPLL;
+ VL53L1X_ERROR status = 0;
+ uint32_t tmp;
+
+ status = VL53L1_RdDWord(Device,VL53L1_SYSTEM__INTERMEASUREMENT_PERIOD, &tmp);
+ *pIM = (uint16_t)tmp;
+ status = VL53L1_RdWord(Device, VL53L1_RESULT__OSC_CALIBRATE_VAL, &ClockPLL);
+ ClockPLL = ClockPLL&0x3FF;
+ *pIM= (uint16_t)(*pIM/(ClockPLL*1.065));
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_BootState(uint8_t *state)
+{
+ VL53L1X_ERROR status = 0;
+ uint8_t tmp = 0;
+
+ status = VL53L1_RdByte(Device,VL53L1_FIRMWARE__SYSTEM_STATUS, &tmp);
+ *state = tmp;
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetSensorId(uint16_t *sensorId)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp = 0;
+
+ status = VL53L1_RdWord(Device, VL53L1_IDENTIFICATION__MODEL_ID, &tmp);
+ *sensorId = tmp;
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetDistance(uint16_t *distance)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp;
+
+ status = (VL53L1_RdWord(Device,
+ VL53L1_RESULT__FINAL_CROSSTALK_CORRECTED_RANGE_MM_SD0, &tmp));
+ *distance = tmp;
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetSignalPerSpad(uint16_t *signalRate)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t SpNb=1, signal;
+
+ status = VL53L1_RdWord(Device,
+ VL53L1_RESULT__PEAK_SIGNAL_COUNT_RATE_CROSSTALK_CORRECTED_MCPS_SD0, &signal);
+ status = VL53L1_RdWord(Device,
+ VL53L1_RESULT__DSS_ACTUAL_EFFECTIVE_SPADS_SD0, &SpNb);
+ *signalRate = (uint16_t) (2000.0*signal/SpNb);
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetAmbientPerSpad(uint16_t *ambPerSp)
+{
+ VL53L1X_ERROR status=0;
+ uint16_t AmbientRate, SpNb=1;
+
+ status = VL53L1_RdWord(Device, RESULT__AMBIENT_COUNT_RATE_MCPS_SD, &AmbientRate);
+ status = VL53L1_RdWord(Device, VL53L1_RESULT__DSS_ACTUAL_EFFECTIVE_SPADS_SD0, &SpNb);
+ *ambPerSp=(uint16_t) (2000.0 * AmbientRate / SpNb);
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetSignalRate(uint16_t *signal)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp;
+
+ status = VL53L1_RdWord(Device,
+ VL53L1_RESULT__PEAK_SIGNAL_COUNT_RATE_CROSSTALK_CORRECTED_MCPS_SD0, &tmp);
+ *signal = tmp*8;
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetSpadNb(uint16_t *spNb)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp;
+
+ status = VL53L1_RdWord(Device,
+ VL53L1_RESULT__DSS_ACTUAL_EFFECTIVE_SPADS_SD0, &tmp);
+ *spNb = tmp >> 8;
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetAmbientRate(uint16_t *ambRate)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp;
+
+ status = VL53L1_RdWord(Device, RESULT__AMBIENT_COUNT_RATE_MCPS_SD, &tmp);
+ *ambRate = tmp*8;
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetRangeStatus(uint8_t *rangeStatus)
+{
+ VL53L1X_ERROR status = 0;
+ uint8_t RgSt;
+
+ status = VL53L1_RdByte(Device, VL53L1_RESULT__RANGE_STATUS, &RgSt);
+ RgSt = RgSt&0x1F;
+ switch (RgSt) {
+ case 9:
+ RgSt = 0;
+ break;
+ case 6:
+ RgSt = 1;
+ break;
+ case 4:
+ RgSt = 2;
+ break;
+ case 8:
+ RgSt = 3;
+ break;
+ case 5:
+ RgSt = 4;
+ break;
+ case 3:
+ RgSt = 5;
+ break;
+ case 19:
+ RgSt = 6;
+ break;
+ case 7:
+ RgSt = 7;
+ break;
+ case 12:
+ RgSt = 9;
+ break;
+ case 18:
+ RgSt = 10;
+ break;
+ case 22:
+ RgSt = 11;
+ break;
+ case 23:
+ RgSt = 12;
+ break;
+ case 13:
+ RgSt = 13;
+ break;
+ default:
+ RgSt = 255;
+ break;
+ }
+ *rangeStatus = RgSt;
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetOffset(int16_t OffsetValue)
+{
+ VL53L1X_ERROR status = 0;
+ int16_t Temp;
+
+ Temp = (OffsetValue*4);
+ VL53L1_WrWord(Device, ALGO__PART_TO_PART_RANGE_OFFSET_MM,
+ (uint16_t)Temp);
+ VL53L1_WrWord(Device, MM_CONFIG__INNER_OFFSET_MM, 0x0);
+ VL53L1_WrWord(Device, MM_CONFIG__OUTER_OFFSET_MM, 0x0);
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetOffset(int16_t *offset)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t Temp;
+
+ status = VL53L1_RdWord(Device,ALGO__PART_TO_PART_RANGE_OFFSET_MM, &Temp);
+ Temp = Temp<<3;
+ Temp = Temp >>5;
+ *offset = (int16_t)(Temp);
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetXtalk(uint16_t XtalkValue)
+{
+/* XTalkValue in count per second to avoid float type */
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1_WrWord(Device,
+ ALGO__CROSSTALK_COMPENSATION_X_PLANE_GRADIENT_KCPS,
+ 0x0000);
+ status = VL53L1_WrWord(Device, ALGO__CROSSTALK_COMPENSATION_Y_PLANE_GRADIENT_KCPS,
+ 0x0000);
+ status = VL53L1_WrWord(Device, ALGO__CROSSTALK_COMPENSATION_PLANE_OFFSET_KCPS,
+ (XtalkValue<<9)/1000); /* * << 9 (7.9 format) and /1000 to convert cps to kpcs */
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetXtalk(uint16_t *xtalk )
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp;
+
+ status = VL53L1_RdWord(Device,ALGO__CROSSTALK_COMPENSATION_PLANE_OFFSET_KCPS, &tmp);
+ *xtalk = (tmp*1000)>>9; /* * 1000 to convert kcps to cps and >> 9 (7.9 format) */
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetDistanceThreshold(uint16_t ThreshLow,
+ uint16_t ThreshHigh, uint8_t Window,
+ uint8_t IntOnNoTarget)
+{
+ VL53L1X_ERROR status = 0;
+ uint8_t Temp = 0;
+
+ status = VL53L1_RdByte(Device, SYSTEM__INTERRUPT_CONFIG_GPIO, &Temp);
+ Temp = Temp & 0x47;
+ if (IntOnNoTarget == 0) {
+ status = VL53L1_WrByte(Device, SYSTEM__INTERRUPT_CONFIG_GPIO,
+ (Temp | (Window & 0x07)));
+ } else {
+ status = VL53L1_WrByte(Device, SYSTEM__INTERRUPT_CONFIG_GPIO,
+ ((Temp | (Window & 0x07)) | 0x40));
+ }
+ status = VL53L1_WrWord(Device, SYSTEM__THRESH_HIGH, ThreshHigh);
+ status = VL53L1_WrWord(Device, SYSTEM__THRESH_LOW, ThreshLow);
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetDistanceThresholdWindow(uint16_t *window)
+{
+ VL53L1X_ERROR status = 0;
+ uint8_t tmp;
+ status = VL53L1_RdByte(Device,SYSTEM__INTERRUPT_CONFIG_GPIO, &tmp);
+ *window = (uint16_t)(tmp & 0x7);
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetDistanceThresholdLow(uint16_t *low)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp;
+
+ status = VL53L1_RdWord(Device,SYSTEM__THRESH_LOW, &tmp);
+ *low = tmp;
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetDistanceThresholdHigh(uint16_t *high)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp;
+
+ status = VL53L1_RdWord(Device,SYSTEM__THRESH_HIGH, &tmp);
+ *high = tmp;
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetROI(uint16_t X, uint16_t Y)
+{
+ uint8_t OpticalCenter;
+ VL53L1X_ERROR status = 0;
+
+ status =VL53L1_RdByte(Device, VL53L1_ROI_CONFIG__MODE_ROI_CENTRE_SPAD, &OpticalCenter);
+ if (X > 16)
+ X = 16;
+ if (Y > 16)
+ Y = 16;
+ if (X > 10 || Y > 10){
+ OpticalCenter = 199;
+ }
+ status = VL53L1_WrByte(Device, ROI_CONFIG__USER_ROI_CENTRE_SPAD, OpticalCenter);
+ status = VL53L1_WrByte(Device, ROI_CONFIG__USER_ROI_REQUESTED_GLOBAL_XY_SIZE,
+ (Y - 1) << 4 | (X - 1));
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetROI_XY(uint16_t *ROI_X, uint16_t *ROI_Y)
+{
+ VL53L1X_ERROR status = 0;
+ uint8_t tmp;
+
+ status = VL53L1_RdByte(Device,ROI_CONFIG__USER_ROI_REQUESTED_GLOBAL_XY_SIZE, &tmp);
+ *ROI_X = ((uint16_t)tmp & 0x0F) + 1;
+ *ROI_Y = (((uint16_t)tmp & 0xF0) >> 4) + 1;
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetSignalThreshold(uint16_t Signal)
+{
+ VL53L1X_ERROR status = 0;
+
+ VL53L1_WrWord(Device,RANGE_CONFIG__MIN_COUNT_RATE_RTN_LIMIT_MCPS,Signal>>3);
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetSignalThreshold(uint16_t *signal)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp;
+
+ status = VL53L1_RdWord(Device,
+ RANGE_CONFIG__MIN_COUNT_RATE_RTN_LIMIT_MCPS, &tmp);
+ *signal = tmp <<3;
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1X_SetSigmaThreshold(uint16_t Sigma)
+{
+ VL53L1X_ERROR status = 0;
+
+ if(Sigma>(0xFFFF>>2)){
+ return 1;
+ }
+ /* 16 bits register 14.2 format */
+ status = VL53L1_WrWord(Device,RANGE_CONFIG__SIGMA_THRESH,Sigma<<2);
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_GetSigmaThreshold(uint16_t *sigma)
+{
+ VL53L1X_ERROR status = 0;
+ uint16_t tmp;
+
+ status = VL53L1_RdWord(Device,RANGE_CONFIG__SIGMA_THRESH, &tmp);
+ *sigma = tmp >> 2;
+ return status;
+
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1X_StartTemperatureUpdate()
+{
+ VL53L1X_ERROR status = 0;
+ uint8_t tmp=0;
+
+ status = VL53L1_WrByte(Device,VL53L1_VHV_CONFIG__TIMEOUT_MACROP_LOOP_BOUND,0x81); /* full VHV */
+ status = VL53L1_WrByte(Device,0x0B,0x92);
+ status = VL53L1X_StartRanging();
+ while(tmp==0){
+ status = VL53L1X_CheckForDataReady(&tmp);
+ }
+ tmp = 0;
+ status = VL53L1X_ClearInterrupt();
+ status = VL53L1X_StopRanging();
+ status = VL53L1_WrByte(Device, VL53L1_VHV_CONFIG__TIMEOUT_MACROP_LOOP_BOUND, 0x09); /* two bounds VHV */
+ status = VL53L1_WrByte(Device, 0x0B, 0); /* start VHV from the previous temperature */
+ return status;
+}
+
+ /* VL53L1X_calibration.h functions */
+
+int8_t VL53L1X::VL53L1X_CalibrateOffset(uint16_t TargetDistInMm, int16_t *offset)
+{
+ uint8_t i = 0, tmp;
+ int16_t AverageDistance = 0;
+ uint16_t distance;
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1_WrWord(Device, ALGO__PART_TO_PART_RANGE_OFFSET_MM, 0x0);
+ status = VL53L1_WrWord(Device, MM_CONFIG__INNER_OFFSET_MM, 0x0);
+ status = VL53L1_WrWord(Device, MM_CONFIG__OUTER_OFFSET_MM, 0x0);
+ status = VL53L1X_StartRanging(); /* Enable VL53L1X sensor */
+ for (i = 0; i < 50; i++) {
+ while (tmp == 0){
+ status = VL53L1X_CheckForDataReady(&tmp);
+ }
+ tmp = 0;
+ status = VL53L1X_GetDistance(&distance);
+ status = VL53L1X_ClearInterrupt();
+ AverageDistance = AverageDistance + distance;
+ }
+ status = VL53L1X_StopRanging();
+ AverageDistance = AverageDistance / 50;
+ *offset = TargetDistInMm - AverageDistance;
+ status = VL53L1_WrWord(Device, ALGO__PART_TO_PART_RANGE_OFFSET_MM, *offset*4);
+ return status;
+}
+
+
+int8_t VL53L1X::VL53L1X_CalibrateXtalk(uint16_t TargetDistInMm, uint16_t *xtalk)
+{
+ uint8_t i, tmp= 0;
+ float AverageSignalRate = 0;
+ float AverageDistance = 0;
+ float AverageSpadNb = 0;
+ uint16_t distance = 0, spadNum;
+ uint16_t sr;
+ VL53L1X_ERROR status = 0;
+
+ status = VL53L1_WrWord(Device, 0x0016,0);
+ status = VL53L1X_StartRanging();
+ for (i = 0; i < 50; i++) {
+ while (tmp == 0){
+ status = VL53L1X_CheckForDataReady(&tmp);
+ }
+ tmp=0;
+ status= VL53L1X_GetSignalRate(&sr);
+ status= VL53L1X_GetDistance(&distance);
+ status = VL53L1X_ClearInterrupt();
+ AverageDistance = AverageDistance + distance;
+ status = VL53L1X_GetSpadNb(&spadNum);
+ AverageSpadNb = AverageSpadNb + spadNum;
+ AverageSignalRate =
+ AverageSignalRate + sr;
+ }
+ status = VL53L1X_StopRanging();
+ AverageDistance = AverageDistance / 50;
+ AverageSpadNb = AverageSpadNb / 50;
+ AverageSignalRate = AverageSignalRate / 50;
+ /* Calculate Xtalk value */
+ *xtalk = (uint16_t)(512*(AverageSignalRate*(1-(AverageDistance/TargetDistInMm)))/AverageSpadNb);
+ status = VL53L1_WrWord(Device, 0x0016, *xtalk);
+ return status;
+}
+
+
+
+
+ /* Write and read functions from I2C */
+
+
+VL53L1X_ERROR VL53L1X::VL53L1_WriteMulti(VL53L1_DEV Dev, uint16_t index, uint8_t *pdata, uint32_t count)
+{
+ int status;
+
+ status = VL53L1_I2CWrite(Dev->I2cDevAddr, index, pdata, (uint16_t)count);
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1_ReadMulti(VL53L1_DEV Dev, uint16_t index, uint8_t *pdata, uint32_t count)
+{
+ int status;
+
+ status = VL53L1_I2CRead(Dev->I2cDevAddr, index, pdata, (uint16_t)count);
+
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1_WrByte(VL53L1_DEV Dev, uint16_t index, uint8_t data)
+{
+ int status;
+
+ status=VL53L1_I2CWrite(Dev->I2cDevAddr, index, &data, 1);
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1_WrWord(VL53L1_DEV Dev, uint16_t index, uint16_t data)
+{
+ int status;
+ uint8_t buffer[2];
+
+ buffer[0] = data >> 8;
+ buffer[1] = data & 0x00FF;
+ status=VL53L1_I2CWrite(Dev->I2cDevAddr, index, (uint8_t *)buffer, 2);
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1_WrDWord(VL53L1_DEV Dev, uint16_t index, uint32_t data)
+{
+ int status;
+ uint8_t buffer[4];
+
+ buffer[0] = (data >> 24) & 0xFF;
+ buffer[1] = (data >> 16) & 0xFF;
+ buffer[2] = (data >> 8) & 0xFF;
+ buffer[3] = (data >> 0) & 0xFF;
+ status=VL53L1_I2CWrite(Dev->I2cDevAddr, index, (uint8_t *)buffer, 4);
+ return status;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1_RdByte(VL53L1_DEV Dev, uint16_t index, uint8_t *data)
+{
+ int status;
+
+ status = VL53L1_I2CRead(Dev->I2cDevAddr, index, data, 1);
+
+ if(status)
+ return -1;
+
+ return 0;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1_RdWord(VL53L1_DEV Dev, uint16_t index, uint16_t *data)
+{
+ int status;
+ uint8_t buffer[2] = {0,0};
+
+ status = VL53L1_I2CRead(Dev->I2cDevAddr, index, buffer, 2);
+ if (!status)
+ {
+ *data = (buffer[0] << 8) + buffer[1];
+ }
+ return status;
+
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1_RdDWord(VL53L1_DEV Dev, uint16_t index, uint32_t *data)
+{
+ int status;
+ uint8_t buffer[4] = {0,0,0,0};
+
+ status = VL53L1_I2CRead(Dev->I2cDevAddr, index, buffer, 4);
+ if(!status)
+ {
+ *data = (buffer[0] << 24) + (buffer[1] << 16) + (buffer[2] << 8) + buffer[3];
+ }
+ return status;
+
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1_UpdateByte(VL53L1_DEV Dev, uint16_t index, uint8_t AndData, uint8_t OrData)
+{
+ int status;
+ uint8_t buffer = 0;
+
+ /* read data direct onto buffer */
+ status = VL53L1_I2CRead(Dev->I2cDevAddr, index, &buffer,1);
+ if (!status)
+ {
+ buffer = (buffer & AndData) | OrData;
+ status = VL53L1_I2CWrite(Dev->I2cDevAddr, index, &buffer, (uint16_t)1);
+ }
+ return status;
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1_I2CWrite(uint8_t DeviceAddr, uint16_t RegisterAddr, uint8_t* pBuffer, uint16_t NumByteToWrite)
+{
+ int ret;
+ ret = dev_i2c->v53l1x_i2c_write(pBuffer, DeviceAddr, RegisterAddr, NumByteToWrite);
+ if (ret) {
+ return -1;
+ }
+ return 0;
+
+}
+
+VL53L1X_ERROR VL53L1X::VL53L1_I2CRead(uint8_t DeviceAddr, uint16_t RegisterAddr, uint8_t* pBuffer, uint16_t NumByteToRead)
+{
+ int ret;
+
+ ret = dev_i2c->v53l1x_i2c_read(pBuffer, DeviceAddr, RegisterAddr, NumByteToRead);
+ //ret = dev_i2c->i2c_read(pBuffer, DeviceAddr, RegisterAddr, NumByteToRead);
+
+ if (ret) {
+ return -1;
+ }
+ return 0;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1_GetTickCount(
+ uint32_t *ptick_count_ms)
+{
+
+ /* Returns current tick count in [ms] */
+
+ VL53L1X_ERROR status = VL53L1_ERROR_NONE;
+
+ //*ptick_count_ms = timeGetTime();
+ *ptick_count_ms = 0;
+
+ return status;
+}
+
+
+
+VL53L1X_ERROR VL53L1X::VL53L1_WaitUs(VL53L1_Dev_t *pdev, int32_t wait_us)
+{
+ //(void)pdev;
+ //wait_ms(wait_us/1000);
+ return VL53L1_ERROR_NONE;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1_WaitMs(VL53L1_Dev_t *pdev, int32_t wait_ms)
+{
+ //(void)pdev;
+ //wait_ms(wait_ms);
+ return VL53L1_ERROR_NONE;
+}
+
+
+VL53L1X_ERROR VL53L1X::VL53L1_WaitValueMaskEx(
+ VL53L1_Dev_t *pdev,
+ uint32_t timeout_ms,
+ uint16_t index,
+ uint8_t value,
+ uint8_t mask,
+ uint32_t poll_delay_ms)
+{
+
+ /*
+ * Platform implementation of WaitValueMaskEx V2WReg script command
+ *
+ * WaitValueMaskEx(
+ * duration_ms,
+ * index,
+ * value,
+ * mask,
+ * poll_delay_ms);
+ */
+
+ VL53L1_Error status = VL53L1_ERROR_NONE;
+ uint32_t start_time_ms = 0;
+ uint32_t current_time_ms = 0;
+ uint32_t polling_time_ms = 0;
+ uint8_t byte_value = 0;
+ uint8_t found = 0;
+
+
+
+ /* calculate time limit in absolute time */
+
+ VL53L1_GetTickCount(&start_time_ms);
+
+ /* remember current trace functions and temporarily disable
+ * function logging
+ */
+
+
+ /* wait until value is found, timeout reached on error occurred */
+
+ while ((status == VL53L1_ERROR_NONE) &&
+ (polling_time_ms < timeout_ms) &&
+ (found == 0)) {
+
+ if (status == VL53L1_ERROR_NONE)
+ status = VL53L1_RdByte(
+ pdev,
+ index,
+ &byte_value);
+
+ if ((byte_value & mask) == value)
+ found = 1;
+
+ if (status == VL53L1_ERROR_NONE &&
+ found == 0 &&
+ poll_delay_ms > 0)
+ status = VL53L1_WaitMs(
+ pdev,
+ poll_delay_ms);
+
+ /* Update polling time (Compare difference rather than absolute to
+ negate 32bit wrap around issue) */
+ VL53L1_GetTickCount(¤t_time_ms);
+ polling_time_ms = current_time_ms - start_time_ms;
+
+ }
+
+
+ if (found == 0 && status == VL53L1_ERROR_NONE)
+ status = VL53L1_ERROR_TIME_OUT;
+
+ return status;
+}
+
+
+