Simple demo example of X-NUCLEO-IPS02A1 24V Intelligent Power Switch Library usage.
Dependencies: X_NUCLEO_IPS02A1 mbed
Fork of HelloWorld_IPS02A1 by
HelloWorld_IPS02A1, demo example for IPS02A1 expansion board
Introduction
This example application provides a basic code to show how to use the X-NUCLEO-IPS02A1 Intelligent Power Switch Expansion Board. The example performs current measurements on output Channel 1 (Ch1) and Channel 2 (Ch2), continuously, in the following conditions:
- 1) Ch1 OFF, Ch2 OFF
- 2) Ch1 ON, Ch2 OFF
- 3) Ch1 OFF, Ch2 ON
- 4) Ch1 ON, Ch2 ON
for each configuration the Current for each channel is displayed over an opened console (use Hyperterminal or whatever, set 9600 as bauds, 8-bit data, no parity)
Demo Code
The basic operation done by the demo code, which can be used in the customer application are :
1) In order to use get the singleton instance of the X_NUCLEO_IPS02A1 by calling class method `Instance()`:
// IPS expansion board singleton instance static X_NUCLEO_IPS02A1 *ips_expansion_board = X_NUCLEO_IPS02A1::Instance();
2) Switch-on or Switch-off loads output (Channel 1 or Channel 2) by setting or clearing associated digital input :
ips_expansion_board.vps2535h.In_1 = 1; // switch-on Channel 1 ips_expansion_board.vps2535h.In_2 = 0; // switch-off Channel 2
3) Read Current circulating on Channel 1 or Channel 2 and print on the Terminal
Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_1); printf("Current Ch1 = %2.3fA \n\r", Multisense_Signal); Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_2); printf("Current Ch2 = %2.3fA \n\r", Multisense_Signal);
Diff: X_NUCLEO_IPS02A1.lib
- Revision:
- 10:4bf9e0e0dd69
- Parent:
- 9:60a0bf4a5681
--- a/X_NUCLEO_IPS02A1.lib Tue May 09 09:37:26 2017 +0000 +++ b/X_NUCLEO_IPS02A1.lib Thu Jul 13 16:12:22 2017 +0000 @@ -1,1 +1,1 @@ -https://developer.mbed.org/teams/ST/code/X_NUCLEO_IPS02A1/#10e489682b80 +https://developer.mbed.org/teams/ST/code/X_NUCLEO_IPS02A1/#73df2d2b721c