ST
Simple test application for the STMicroelectronics X-NUCLEO-CCA02M1 MEMS Microphones Expansion Board, built against mbed OS.
Dependencies: X_NUCLEO_CCA02M1
Fork of
HelloWorld_CCA02M1
by 
ST Expansion SW Team
You are viewing an older revision! See the latest version
Homepage
Recording audio with the X-NUCLEO-CCA02M1 Expansion Board¶
This application provides a simple example of usage of the X-NUCLEO-CCA02M1 MEMS Microphones Expansion Board.
It shows how to record a 2-channel stereo signal as an array of PCM samples that can be acquired through an audio SW like Audacity, for example.
Microphones configuration
Currently the only configurations supported are mono@16KHz, stereo@16KHz, and mono@32KHz.
Platform compatibility¶
- This board can be currently used with a Nucleo-F401RE board only and has been tested with the default configuration provided by this example.
- At the moment the application is compatible with mbedOS 5.x only, i.e. it cannot work with mbed 2 ("classic").
Acquiring through the USB on Windows¶
In order to acquire the recorded PCM audio channel with an audio SW on a PC, please connect the expansion board to a USB port of the PC, and the Nucleo board to a USB power supply.
On Windows, click on the speaker icon on the bottom bar, select "Recording devices", "Microphone", "Properties", then click on the "Advanced" panel, and select "2 channels, 16 bit, 16KHz".
Open your preferred audio SW, like "Audacity" for example, configure it to acquire a 2-channel stereo at 16KHz, and record.