ST
STM32F429ZI Discovery board drivers
Dependents: 2a 2b 2c 2d1 ... more
Drivers/BSP/STM32F429I-Discovery/stm32f429i_discovery.c@2:53d9067a4feb, 2018-02-28 (annotated)
- Committer:
- Jerome Coutant
- Date:
- Wed Feb 28 13:17:14 2018 +0100
- Revision:
- 2:53d9067a4feb
- Parent:
- 1:2371382139dd
STM32Cube_FW_F4_V1.19.0 BSP_DISCO_F429ZI
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
Jerome Coutant |
1:2371382139dd
|
1
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
2
|
******************************************************************************
|
|
Jerome Coutant |
1:2371382139dd
|
3
|
* @file stm32f429i_discovery.c
|
|
Jerome Coutant |
1:2371382139dd
|
4
|
* @author MCD Application Team
|
|
Jerome Coutant |
1:2371382139dd
|
5
|
* @brief This file provides set of firmware functions to manage Leds and
|
|
Jerome Coutant |
1:2371382139dd
|
6
|
* push-button available on STM32F429I-Discovery Kit from STMicroelectronics.
|
|
Jerome Coutant |
1:2371382139dd
|
7
|
******************************************************************************
|
|
Jerome Coutant |
1:2371382139dd
|
8
|
* @attention
|
|
Jerome Coutant |
1:2371382139dd
|
9
|
*
|
|
Jerome Coutant |
1:2371382139dd
|
10
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
Jerome Coutant |
1:2371382139dd
|
11
|
*
|
|
Jerome Coutant |
1:2371382139dd
|
12
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
Jerome Coutant |
1:2371382139dd
|
13
|
* are permitted provided that the following conditions are met:
|
|
Jerome Coutant |
1:2371382139dd
|
14
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
Jerome Coutant |
1:2371382139dd
|
15
|
* this list of conditions and the following disclaimer.
|
|
Jerome Coutant |
1:2371382139dd
|
16
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
Jerome Coutant |
1:2371382139dd
|
17
|
* this list of conditions and the following disclaimer in the documentation
|
|
Jerome Coutant |
1:2371382139dd
|
18
|
* and/or other materials provided with the distribution.
|
|
Jerome Coutant |
1:2371382139dd
|
19
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
Jerome Coutant |
1:2371382139dd
|
20
|
* may be used to endorse or promote products derived from this software
|
|
Jerome Coutant |
1:2371382139dd
|
21
|
* without specific prior written permission.
|
|
Jerome Coutant |
1:2371382139dd
|
22
|
*
|
|
Jerome Coutant |
1:2371382139dd
|
23
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
Jerome Coutant |
1:2371382139dd
|
24
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
Jerome Coutant |
1:2371382139dd
|
25
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
Jerome Coutant |
1:2371382139dd
|
26
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
Jerome Coutant |
1:2371382139dd
|
27
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
Jerome Coutant |
1:2371382139dd
|
28
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
Jerome Coutant |
1:2371382139dd
|
29
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
Jerome Coutant |
1:2371382139dd
|
30
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
Jerome Coutant |
1:2371382139dd
|
31
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
Jerome Coutant |
1:2371382139dd
|
32
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
Jerome Coutant |
1:2371382139dd
|
33
|
*
|
|
Jerome Coutant |
1:2371382139dd
|
34
|
******************************************************************************
|
|
Jerome Coutant |
1:2371382139dd
|
35
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
36
|
|
|
Jerome Coutant |
1:2371382139dd
|
37
|
/* Includes ------------------------------------------------------------------*/
|
|
Jerome Coutant |
1:2371382139dd
|
38
|
#include "stm32f429i_discovery.h"
|
|
Jerome Coutant |
1:2371382139dd
|
39
|
#include "cmsis_nvic.h" // // Added for mbed
|
|
Jerome Coutant |
1:2371382139dd
|
40
|
|
|
Jerome Coutant |
1:2371382139dd
|
41
|
// Added for mbed. This function replaces HAL_Delay()
|
|
Jerome Coutant |
1:2371382139dd
|
42
|
void wait_ms(int ms);
|
|
Jerome Coutant |
1:2371382139dd
|
43
|
|
|
Jerome Coutant |
1:2371382139dd
|
44
|
/** @defgroup BSP BSP
|
|
Jerome Coutant |
1:2371382139dd
|
45
|
* @{
|
|
Jerome Coutant |
1:2371382139dd
|
46
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
47
|
|
|
Jerome Coutant |
1:2371382139dd
|
48
|
/** @defgroup STM32F429I_DISCOVERY STM32F429I DISCOVERY
|
|
Jerome Coutant |
1:2371382139dd
|
49
|
* @{
|
|
Jerome Coutant |
1:2371382139dd
|
50
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
51
|
|
|
Jerome Coutant |
1:2371382139dd
|
52
|
/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL STM32F429I DISCOVERY LOW LEVEL
|
|
Jerome Coutant |
1:2371382139dd
|
53
|
* @brief This file provides set of firmware functions to manage Leds and push-button
|
|
Jerome Coutant |
1:2371382139dd
|
54
|
* available on STM32F429I-Discovery Kit from STMicroelectronics.
|
|
Jerome Coutant |
1:2371382139dd
|
55
|
* @{
|
|
Jerome Coutant |
1:2371382139dd
|
56
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
57
|
|
|
Jerome Coutant |
1:2371382139dd
|
58
|
/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Private_TypesDefinitions STM32F429I DISCOVERY LOW LEVEL Private TypesDefinitions
|
|
Jerome Coutant |
1:2371382139dd
|
59
|
* @{
|
|
Jerome Coutant |
1:2371382139dd
|
60
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
61
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
62
|
* @}
|
|
Jerome Coutant |
1:2371382139dd
|
63
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
64
|
|
|
Jerome Coutant |
1:2371382139dd
|
65
|
/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Private_Defines STM32F429I DISCOVERY LOW LEVEL Private Defines
|
|
Jerome Coutant |
1:2371382139dd
|
66
|
* @{
|
|
Jerome Coutant |
1:2371382139dd
|
67
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
68
|
|
|
Jerome Coutant |
1:2371382139dd
|
69
|
/**
|
|
Jerome Coutant |
2:53d9067a4feb
|
70
|
* @brief STM32F429I DISCO BSP Driver version number V2.1.6
|
|
Jerome Coutant |
1:2371382139dd
|
71
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
72
|
#define __STM32F429I_DISCO_BSP_VERSION_MAIN (0x02) /*!< [31:24] main version */
|
|
Jerome Coutant |
1:2371382139dd
|
73
|
#define __STM32F429I_DISCO_BSP_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
|
|
Jerome Coutant |
2:53d9067a4feb
|
74
|
#define __STM32F429I_DISCO_BSP_VERSION_SUB2 (0x06) /*!< [15:8] sub2 version */
|
|
Jerome Coutant |
1:2371382139dd
|
75
|
#define __STM32F429I_DISCO_BSP_VERSION_RC (0x00) /*!< [7:0] release candidate */
|
|
Jerome Coutant |
1:2371382139dd
|
76
|
#define __STM32F429I_DISCO_BSP_VERSION ((__STM32F429I_DISCO_BSP_VERSION_MAIN << 24)\
|
|
Jerome Coutant |
1:2371382139dd
|
77
|
|(__STM32F429I_DISCO_BSP_VERSION_SUB1 << 16)\
|
|
Jerome Coutant |
1:2371382139dd
|
78
|
|(__STM32F429I_DISCO_BSP_VERSION_SUB2 << 8 )\
|
|
Jerome Coutant |
1:2371382139dd
|
79
|
|(__STM32F429I_DISCO_BSP_VERSION_RC))
|
|
Jerome Coutant |
1:2371382139dd
|
80
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
81
|
* @}
|
|
Jerome Coutant |
1:2371382139dd
|
82
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
83
|
|
|
Jerome Coutant |
1:2371382139dd
|
84
|
/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Private_Macros STM32F429I DISCOVERY LOW LEVEL Private Macros
|
|
Jerome Coutant |
1:2371382139dd
|
85
|
* @{
|
|
Jerome Coutant |
1:2371382139dd
|
86
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
87
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
88
|
* @}
|
|
Jerome Coutant |
1:2371382139dd
|
89
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
90
|
|
|
Jerome Coutant |
1:2371382139dd
|
91
|
/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Private_Variables STM32F429I DISCOVERY LOW LEVEL Private Variables
|
|
Jerome Coutant |
1:2371382139dd
|
92
|
* @{
|
|
Jerome Coutant |
1:2371382139dd
|
93
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
94
|
GPIO_TypeDef* GPIO_PORT[LEDn] = {LED3_GPIO_PORT,
|
|
Jerome Coutant |
1:2371382139dd
|
95
|
LED4_GPIO_PORT};
|
|
Jerome Coutant |
1:2371382139dd
|
96
|
|
|
Jerome Coutant |
1:2371382139dd
|
97
|
const uint16_t GPIO_PIN[LEDn] = {LED3_PIN,
|
|
Jerome Coutant |
1:2371382139dd
|
98
|
LED4_PIN};
|
|
Jerome Coutant |
1:2371382139dd
|
99
|
|
|
Jerome Coutant |
1:2371382139dd
|
100
|
GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {KEY_BUTTON_GPIO_PORT};
|
|
Jerome Coutant |
1:2371382139dd
|
101
|
const uint16_t BUTTON_PIN[BUTTONn] = {KEY_BUTTON_PIN};
|
|
Jerome Coutant |
1:2371382139dd
|
102
|
const uint8_t BUTTON_IRQn[BUTTONn] = {KEY_BUTTON_EXTI_IRQn};
|
|
Jerome Coutant |
1:2371382139dd
|
103
|
|
|
Jerome Coutant |
1:2371382139dd
|
104
|
uint32_t I2cxTimeout = I2Cx_TIMEOUT_MAX; /*<! Value of Timeout when I2C communication fails */
|
|
Jerome Coutant |
1:2371382139dd
|
105
|
uint32_t SpixTimeout = SPIx_TIMEOUT_MAX; /*<! Value of Timeout when SPI communication fails */
|
|
Jerome Coutant |
1:2371382139dd
|
106
|
|
|
Jerome Coutant |
1:2371382139dd
|
107
|
I2C_HandleTypeDef EEP_I2cHandle;
|
|
Jerome Coutant |
1:2371382139dd
|
108
|
static SPI_HandleTypeDef SpiHandle;
|
|
Jerome Coutant |
1:2371382139dd
|
109
|
static uint8_t Is_LCD_IO_Initialized = 0;
|
|
Jerome Coutant |
1:2371382139dd
|
110
|
|
|
Jerome Coutant |
1:2371382139dd
|
111
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
112
|
* @}
|
|
Jerome Coutant |
1:2371382139dd
|
113
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
114
|
|
|
Jerome Coutant |
1:2371382139dd
|
115
|
/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Private_FunctionPrototypes STM32F429I DISCOVERY LOW LEVEL Private FunctionPrototypes
|
|
Jerome Coutant |
1:2371382139dd
|
116
|
* @{
|
|
Jerome Coutant |
1:2371382139dd
|
117
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
118
|
/* I2Cx bus function */
|
|
Jerome Coutant |
1:2371382139dd
|
119
|
static void I2Cx_Init(void);
|
|
Jerome Coutant |
1:2371382139dd
|
120
|
static void I2Cx_ITConfig(void);
|
|
Jerome Coutant |
1:2371382139dd
|
121
|
static void I2Cx_WriteData(uint8_t Addr, uint8_t Reg, uint8_t Value);
|
|
Jerome Coutant |
1:2371382139dd
|
122
|
static void I2Cx_WriteBuffer(uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length);
|
|
Jerome Coutant |
1:2371382139dd
|
123
|
static uint8_t I2Cx_ReadData(uint8_t Addr, uint8_t Reg);
|
|
Jerome Coutant |
1:2371382139dd
|
124
|
static uint8_t I2Cx_ReadBuffer(uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length);
|
|
Jerome Coutant |
1:2371382139dd
|
125
|
static void I2Cx_Error(void);
|
|
Jerome Coutant |
1:2371382139dd
|
126
|
static void I2Cx_MspInit(I2C_HandleTypeDef *hi2c);
|
|
Jerome Coutant |
1:2371382139dd
|
127
|
#ifdef EE_M24LR64
|
|
Jerome Coutant |
1:2371382139dd
|
128
|
static HAL_StatusTypeDef I2Cx_WriteBufferDMA(uint8_t Addr, uint16_t Reg, uint8_t *pBuffer, uint16_t Length);
|
|
Jerome Coutant |
1:2371382139dd
|
129
|
static HAL_StatusTypeDef I2Cx_ReadBufferDMA(uint8_t Addr, uint16_t Reg, uint8_t *pBuffer, uint16_t Length);
|
|
Jerome Coutant |
1:2371382139dd
|
130
|
static HAL_StatusTypeDef I2Cx_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
|
|
Jerome Coutant |
1:2371382139dd
|
131
|
static void EEPROM_I2C_DMA_TX_IRQHandler(void);
|
|
Jerome Coutant |
1:2371382139dd
|
132
|
static void EEPROM_I2C_DMA_RX_IRQHandler(void);
|
|
Jerome Coutant |
1:2371382139dd
|
133
|
#endif /* EE_M24LR64 */
|
|
Jerome Coutant |
1:2371382139dd
|
134
|
|
|
Jerome Coutant |
1:2371382139dd
|
135
|
/* SPIx bus function */
|
|
Jerome Coutant |
1:2371382139dd
|
136
|
static void SPIx_Init(void);
|
|
Jerome Coutant |
1:2371382139dd
|
137
|
static void SPIx_Write(uint16_t Value);
|
|
Jerome Coutant |
1:2371382139dd
|
138
|
static uint32_t SPIx_Read(uint8_t ReadSize);
|
|
Jerome Coutant |
1:2371382139dd
|
139
|
static uint8_t SPIx_WriteRead(uint8_t Byte);
|
|
Jerome Coutant |
1:2371382139dd
|
140
|
static void SPIx_Error(void);
|
|
Jerome Coutant |
1:2371382139dd
|
141
|
static void SPIx_MspInit(SPI_HandleTypeDef *hspi);
|
|
Jerome Coutant |
1:2371382139dd
|
142
|
|
|
Jerome Coutant |
1:2371382139dd
|
143
|
/* Link function for LCD peripheral */
|
|
Jerome Coutant |
1:2371382139dd
|
144
|
void LCD_IO_Init(void);
|
|
Jerome Coutant |
1:2371382139dd
|
145
|
void LCD_IO_WriteData(uint16_t RegValue);
|
|
Jerome Coutant |
1:2371382139dd
|
146
|
void LCD_IO_WriteReg(uint8_t Reg);
|
|
Jerome Coutant |
1:2371382139dd
|
147
|
uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize);
|
|
Jerome Coutant |
1:2371382139dd
|
148
|
void LCD_Delay(uint32_t delay);
|
|
Jerome Coutant |
1:2371382139dd
|
149
|
|
|
Jerome Coutant |
1:2371382139dd
|
150
|
/* IOExpander IO functions */
|
|
Jerome Coutant |
1:2371382139dd
|
151
|
void IOE_Init(void);
|
|
Jerome Coutant |
1:2371382139dd
|
152
|
void IOE_ITConfig(void);
|
|
Jerome Coutant |
1:2371382139dd
|
153
|
void IOE_Delay(uint32_t Delay);
|
|
Jerome Coutant |
1:2371382139dd
|
154
|
void IOE_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
|
|
Jerome Coutant |
1:2371382139dd
|
155
|
uint8_t IOE_Read(uint8_t Addr, uint8_t Reg);
|
|
Jerome Coutant |
1:2371382139dd
|
156
|
uint16_t IOE_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length);
|
|
Jerome Coutant |
1:2371382139dd
|
157
|
void IOE_WriteMultiple(uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length);
|
|
Jerome Coutant |
1:2371382139dd
|
158
|
|
|
Jerome Coutant |
1:2371382139dd
|
159
|
/* Link function for GYRO peripheral */
|
|
Jerome Coutant |
1:2371382139dd
|
160
|
void GYRO_IO_Init(void);
|
|
Jerome Coutant |
1:2371382139dd
|
161
|
void GYRO_IO_Write(uint8_t* pBuffer, uint8_t WriteAddr, uint16_t NumByteToWrite);
|
|
Jerome Coutant |
1:2371382139dd
|
162
|
void GYRO_IO_Read(uint8_t* pBuffer, uint8_t ReadAddr, uint16_t NumByteToRead);
|
|
Jerome Coutant |
1:2371382139dd
|
163
|
|
|
Jerome Coutant |
1:2371382139dd
|
164
|
#ifdef EE_M24LR64
|
|
Jerome Coutant |
1:2371382139dd
|
165
|
/* Link function for I2C EEPROM peripheral */
|
|
Jerome Coutant |
1:2371382139dd
|
166
|
void EEPROM_IO_Init(void);
|
|
Jerome Coutant |
1:2371382139dd
|
167
|
HAL_StatusTypeDef EEPROM_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
|
|
Jerome Coutant |
1:2371382139dd
|
168
|
HAL_StatusTypeDef EEPROM_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
|
|
Jerome Coutant |
1:2371382139dd
|
169
|
HAL_StatusTypeDef EEPROM_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
|
|
Jerome Coutant |
1:2371382139dd
|
170
|
#endif /* EE_M24LR64 */
|
|
Jerome Coutant |
1:2371382139dd
|
171
|
|
|
Jerome Coutant |
1:2371382139dd
|
172
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
173
|
* @}
|
|
Jerome Coutant |
1:2371382139dd
|
174
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
175
|
|
|
Jerome Coutant |
1:2371382139dd
|
176
|
/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Private_Functions STM32F429I DISCOVERY LOW LEVEL Private Functions
|
|
Jerome Coutant |
1:2371382139dd
|
177
|
* @{
|
|
Jerome Coutant |
1:2371382139dd
|
178
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
179
|
|
|
Jerome Coutant |
1:2371382139dd
|
180
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
181
|
* @brief This method returns the STM32F429I DISCO BSP Driver revision
|
|
Jerome Coutant |
1:2371382139dd
|
182
|
* @retval version: 0xXYZR (8bits for each decimal, R for RC)
|
|
Jerome Coutant |
1:2371382139dd
|
183
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
184
|
uint32_t BSP_GetVersion(void)
|
|
Jerome Coutant |
1:2371382139dd
|
185
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
186
|
return __STM32F429I_DISCO_BSP_VERSION;
|
|
Jerome Coutant |
1:2371382139dd
|
187
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
188
|
|
|
Jerome Coutant |
1:2371382139dd
|
189
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
190
|
* @brief Configures LED GPIO.
|
|
Jerome Coutant |
1:2371382139dd
|
191
|
* @param Led: Specifies the Led to be configured.
|
|
Jerome Coutant |
1:2371382139dd
|
192
|
* This parameter can be one of following parameters:
|
|
Jerome Coutant |
1:2371382139dd
|
193
|
* @arg LED3
|
|
Jerome Coutant |
1:2371382139dd
|
194
|
* @arg LED4
|
|
Jerome Coutant |
1:2371382139dd
|
195
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
196
|
void BSP_LED_Init(Led_TypeDef Led)
|
|
Jerome Coutant |
1:2371382139dd
|
197
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
198
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
Jerome Coutant |
1:2371382139dd
|
199
|
|
|
Jerome Coutant |
1:2371382139dd
|
200
|
/* Enable the GPIO_LED Clock */
|
|
Jerome Coutant |
1:2371382139dd
|
201
|
LEDx_GPIO_CLK_ENABLE(Led);
|
|
Jerome Coutant |
1:2371382139dd
|
202
|
|
|
Jerome Coutant |
1:2371382139dd
|
203
|
/* Configure the GPIO_LED pin */
|
|
Jerome Coutant |
1:2371382139dd
|
204
|
GPIO_InitStruct.Pin = GPIO_PIN[Led];
|
|
Jerome Coutant |
1:2371382139dd
|
205
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
Jerome Coutant |
1:2371382139dd
|
206
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
Jerome Coutant |
1:2371382139dd
|
207
|
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
|
Jerome Coutant |
1:2371382139dd
|
208
|
|
|
Jerome Coutant |
1:2371382139dd
|
209
|
HAL_GPIO_Init(GPIO_PORT[Led], &GPIO_InitStruct);
|
|
Jerome Coutant |
1:2371382139dd
|
210
|
|
|
Jerome Coutant |
1:2371382139dd
|
211
|
HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_RESET);
|
|
Jerome Coutant |
1:2371382139dd
|
212
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
213
|
|
|
Jerome Coutant |
1:2371382139dd
|
214
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
215
|
* @brief Turns selected LED On.
|
|
Jerome Coutant |
1:2371382139dd
|
216
|
* @param Led: Specifies the Led to be set on.
|
|
Jerome Coutant |
1:2371382139dd
|
217
|
* This parameter can be one of following parameters:
|
|
Jerome Coutant |
1:2371382139dd
|
218
|
* @arg LED3
|
|
Jerome Coutant |
1:2371382139dd
|
219
|
* @arg LED4
|
|
Jerome Coutant |
1:2371382139dd
|
220
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
221
|
void BSP_LED_On(Led_TypeDef Led)
|
|
Jerome Coutant |
1:2371382139dd
|
222
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
223
|
HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_SET);
|
|
Jerome Coutant |
1:2371382139dd
|
224
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
225
|
|
|
Jerome Coutant |
1:2371382139dd
|
226
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
227
|
* @brief Turns selected LED Off.
|
|
Jerome Coutant |
1:2371382139dd
|
228
|
* @param Led: Specifies the Led to be set off.
|
|
Jerome Coutant |
1:2371382139dd
|
229
|
* This parameter can be one of following parameters:
|
|
Jerome Coutant |
1:2371382139dd
|
230
|
* @arg LED3
|
|
Jerome Coutant |
1:2371382139dd
|
231
|
* @arg LED4
|
|
Jerome Coutant |
1:2371382139dd
|
232
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
233
|
void BSP_LED_Off(Led_TypeDef Led)
|
|
Jerome Coutant |
1:2371382139dd
|
234
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
235
|
HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_RESET);
|
|
Jerome Coutant |
1:2371382139dd
|
236
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
237
|
|
|
Jerome Coutant |
1:2371382139dd
|
238
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
239
|
* @brief Toggles the selected LED.
|
|
Jerome Coutant |
1:2371382139dd
|
240
|
* @param Led: Specifies the Led to be toggled.
|
|
Jerome Coutant |
1:2371382139dd
|
241
|
* This parameter can be one of following parameters:
|
|
Jerome Coutant |
1:2371382139dd
|
242
|
* @arg LED3
|
|
Jerome Coutant |
1:2371382139dd
|
243
|
* @arg LED4
|
|
Jerome Coutant |
1:2371382139dd
|
244
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
245
|
void BSP_LED_Toggle(Led_TypeDef Led)
|
|
Jerome Coutant |
1:2371382139dd
|
246
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
247
|
HAL_GPIO_TogglePin(GPIO_PORT[Led], GPIO_PIN[Led]);
|
|
Jerome Coutant |
1:2371382139dd
|
248
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
249
|
|
|
Jerome Coutant |
1:2371382139dd
|
250
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
251
|
* @brief Configures Button GPIO and EXTI Line.
|
|
Jerome Coutant |
1:2371382139dd
|
252
|
* @param Button: Specifies the Button to be configured.
|
|
Jerome Coutant |
1:2371382139dd
|
253
|
* This parameter should be: BUTTON_KEY
|
|
Jerome Coutant |
1:2371382139dd
|
254
|
* @param ButtonMode: Specifies Button mode.
|
|
Jerome Coutant |
1:2371382139dd
|
255
|
* This parameter can be one of following parameters:
|
|
Jerome Coutant |
1:2371382139dd
|
256
|
* @arg BUTTON_MODE_GPIO: Button will be used as simple IO
|
|
Jerome Coutant |
1:2371382139dd
|
257
|
* @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt
|
|
Jerome Coutant |
1:2371382139dd
|
258
|
* generation capability
|
|
Jerome Coutant |
1:2371382139dd
|
259
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
260
|
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
|
|
Jerome Coutant |
1:2371382139dd
|
261
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
262
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
Jerome Coutant |
1:2371382139dd
|
263
|
|
|
Jerome Coutant |
1:2371382139dd
|
264
|
/* Enable the BUTTON Clock */
|
|
Jerome Coutant |
1:2371382139dd
|
265
|
BUTTONx_GPIO_CLK_ENABLE(Button);
|
|
Jerome Coutant |
1:2371382139dd
|
266
|
|
|
Jerome Coutant |
1:2371382139dd
|
267
|
if (ButtonMode == BUTTON_MODE_GPIO)
|
|
Jerome Coutant |
1:2371382139dd
|
268
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
269
|
/* Configure Button pin as input */
|
|
Jerome Coutant |
1:2371382139dd
|
270
|
GPIO_InitStruct.Pin = BUTTON_PIN[Button];
|
|
Jerome Coutant |
1:2371382139dd
|
271
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
Jerome Coutant |
1:2371382139dd
|
272
|
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
|
Jerome Coutant |
1:2371382139dd
|
273
|
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
|
Jerome Coutant |
1:2371382139dd
|
274
|
HAL_GPIO_Init(BUTTON_PORT[Button], &GPIO_InitStruct);
|
|
Jerome Coutant |
1:2371382139dd
|
275
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
276
|
|
|
Jerome Coutant |
1:2371382139dd
|
277
|
if (ButtonMode == BUTTON_MODE_EXTI)
|
|
Jerome Coutant |
1:2371382139dd
|
278
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
279
|
/* Configure Button pin as input with External interrupt */
|
|
Jerome Coutant |
1:2371382139dd
|
280
|
GPIO_InitStruct.Pin = BUTTON_PIN[Button];
|
|
Jerome Coutant |
1:2371382139dd
|
281
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
Jerome Coutant |
1:2371382139dd
|
282
|
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
|
Jerome Coutant |
1:2371382139dd
|
283
|
HAL_GPIO_Init(BUTTON_PORT[Button], &GPIO_InitStruct);
|
|
Jerome Coutant |
1:2371382139dd
|
284
|
|
|
Jerome Coutant |
1:2371382139dd
|
285
|
/* Enable and set Button EXTI Interrupt to the lowest priority */
|
|
Jerome Coutant |
1:2371382139dd
|
286
|
HAL_NVIC_SetPriority((IRQn_Type)(BUTTON_IRQn[Button]), 0x0F, 0x00);
|
|
Jerome Coutant |
1:2371382139dd
|
287
|
HAL_NVIC_EnableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
|
|
Jerome Coutant |
1:2371382139dd
|
288
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
289
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
290
|
|
|
Jerome Coutant |
1:2371382139dd
|
291
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
292
|
* @brief Returns the selected Button state.
|
|
Jerome Coutant |
1:2371382139dd
|
293
|
* @param Button: Specifies the Button to be checked.
|
|
Jerome Coutant |
1:2371382139dd
|
294
|
* This parameter should be: BUTTON_KEY
|
|
Jerome Coutant |
1:2371382139dd
|
295
|
* @retval The Button GPIO pin value.
|
|
Jerome Coutant |
1:2371382139dd
|
296
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
297
|
uint32_t BSP_PB_GetState(Button_TypeDef Button)
|
|
Jerome Coutant |
1:2371382139dd
|
298
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
299
|
return HAL_GPIO_ReadPin(BUTTON_PORT[Button], BUTTON_PIN[Button]);
|
|
Jerome Coutant |
1:2371382139dd
|
300
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
301
|
|
|
Jerome Coutant |
1:2371382139dd
|
302
|
/*******************************************************************************
|
|
Jerome Coutant |
1:2371382139dd
|
303
|
BUS OPERATIONS
|
|
Jerome Coutant |
1:2371382139dd
|
304
|
*******************************************************************************/
|
|
Jerome Coutant |
1:2371382139dd
|
305
|
|
|
Jerome Coutant |
1:2371382139dd
|
306
|
/******************************* I2C Routines *********************************/
|
|
Jerome Coutant |
1:2371382139dd
|
307
|
|
|
Jerome Coutant |
1:2371382139dd
|
308
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
309
|
* @brief I2Cx MSP Initialization
|
|
Jerome Coutant |
1:2371382139dd
|
310
|
* @param hi2c: I2C handle
|
|
Jerome Coutant |
1:2371382139dd
|
311
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
312
|
static void I2Cx_MspInit(I2C_HandleTypeDef *hi2c)
|
|
Jerome Coutant |
1:2371382139dd
|
313
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
314
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
Jerome Coutant |
1:2371382139dd
|
315
|
#ifdef EE_M24LR64
|
|
Jerome Coutant |
1:2371382139dd
|
316
|
static DMA_HandleTypeDef hdma_tx;
|
|
Jerome Coutant |
1:2371382139dd
|
317
|
static DMA_HandleTypeDef hdma_rx;
|
|
Jerome Coutant |
1:2371382139dd
|
318
|
|
|
Jerome Coutant |
1:2371382139dd
|
319
|
I2C_HandleTypeDef* pI2cHandle;
|
|
Jerome Coutant |
1:2371382139dd
|
320
|
pI2cHandle = &EEP_I2cHandle;
|
|
Jerome Coutant |
1:2371382139dd
|
321
|
#endif /* EE_M24LR64 */
|
|
Jerome Coutant |
1:2371382139dd
|
322
|
|
|
Jerome Coutant |
1:2371382139dd
|
323
|
if (hi2c->Instance == DISCOVERY_I2Cx)
|
|
Jerome Coutant |
1:2371382139dd
|
324
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
325
|
/* Configure the GPIOs ---------------------------------------------------*/
|
|
Jerome Coutant |
1:2371382139dd
|
326
|
/* Enable GPIO clock */
|
|
Jerome Coutant |
1:2371382139dd
|
327
|
DISCOVERY_I2Cx_SDA_GPIO_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
328
|
DISCOVERY_I2Cx_SCL_GPIO_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
329
|
|
|
Jerome Coutant |
1:2371382139dd
|
330
|
/* Configure I2C Tx as alternate function */
|
|
Jerome Coutant |
1:2371382139dd
|
331
|
GPIO_InitStruct.Pin = DISCOVERY_I2Cx_SCL_PIN;
|
|
Jerome Coutant |
1:2371382139dd
|
332
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
|
Jerome Coutant |
1:2371382139dd
|
333
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
Jerome Coutant |
1:2371382139dd
|
334
|
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
|
Jerome Coutant |
1:2371382139dd
|
335
|
GPIO_InitStruct.Alternate = DISCOVERY_I2Cx_SCL_SDA_AF;
|
|
Jerome Coutant |
1:2371382139dd
|
336
|
HAL_GPIO_Init(DISCOVERY_I2Cx_SCL_GPIO_PORT, &GPIO_InitStruct);
|
|
Jerome Coutant |
1:2371382139dd
|
337
|
|
|
Jerome Coutant |
1:2371382139dd
|
338
|
/* Configure I2C Rx as alternate function */
|
|
Jerome Coutant |
1:2371382139dd
|
339
|
GPIO_InitStruct.Pin = DISCOVERY_I2Cx_SDA_PIN;
|
|
Jerome Coutant |
1:2371382139dd
|
340
|
HAL_GPIO_Init(DISCOVERY_I2Cx_SDA_GPIO_PORT, &GPIO_InitStruct);
|
|
Jerome Coutant |
1:2371382139dd
|
341
|
|
|
Jerome Coutant |
1:2371382139dd
|
342
|
|
|
Jerome Coutant |
1:2371382139dd
|
343
|
/* Configure the Discovery I2Cx peripheral -------------------------------*/
|
|
Jerome Coutant |
1:2371382139dd
|
344
|
/* Enable I2C3 clock */
|
|
Jerome Coutant |
1:2371382139dd
|
345
|
DISCOVERY_I2Cx_CLOCK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
346
|
|
|
Jerome Coutant |
1:2371382139dd
|
347
|
/* Force the I2C Peripheral Clock Reset */
|
|
Jerome Coutant |
1:2371382139dd
|
348
|
DISCOVERY_I2Cx_FORCE_RESET();
|
|
Jerome Coutant |
1:2371382139dd
|
349
|
|
|
Jerome Coutant |
1:2371382139dd
|
350
|
/* Release the I2C Peripheral Clock Reset */
|
|
Jerome Coutant |
1:2371382139dd
|
351
|
DISCOVERY_I2Cx_RELEASE_RESET();
|
|
Jerome Coutant |
1:2371382139dd
|
352
|
|
|
Jerome Coutant |
1:2371382139dd
|
353
|
/* Enable and set Discovery I2Cx Interrupt to the lowest priority */
|
|
Jerome Coutant |
1:2371382139dd
|
354
|
HAL_NVIC_SetPriority(DISCOVERY_I2Cx_EV_IRQn, 0x0F, 0);
|
|
Jerome Coutant |
1:2371382139dd
|
355
|
HAL_NVIC_EnableIRQ(DISCOVERY_I2Cx_EV_IRQn);
|
|
Jerome Coutant |
1:2371382139dd
|
356
|
|
|
Jerome Coutant |
1:2371382139dd
|
357
|
/* Enable and set Discovery I2Cx Interrupt to the lowest priority */
|
|
Jerome Coutant |
1:2371382139dd
|
358
|
HAL_NVIC_SetPriority(DISCOVERY_I2Cx_ER_IRQn, 0x0F, 0);
|
|
Jerome Coutant |
1:2371382139dd
|
359
|
HAL_NVIC_EnableIRQ(DISCOVERY_I2Cx_ER_IRQn);
|
|
Jerome Coutant |
1:2371382139dd
|
360
|
|
|
Jerome Coutant |
1:2371382139dd
|
361
|
#ifdef EE_M24LR64
|
|
Jerome Coutant |
1:2371382139dd
|
362
|
/* I2C DMA TX and RX channels configuration */
|
|
Jerome Coutant |
1:2371382139dd
|
363
|
/* Enable the DMA clock */
|
|
Jerome Coutant |
1:2371382139dd
|
364
|
EEPROM_I2C_DMA_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
365
|
|
|
Jerome Coutant |
1:2371382139dd
|
366
|
/* Configure the DMA stream for the EE I2C peripheral TX direction */
|
|
Jerome Coutant |
1:2371382139dd
|
367
|
/* Configure the DMA Stream */
|
|
Jerome Coutant |
1:2371382139dd
|
368
|
hdma_tx.Instance = EEPROM_I2C_DMA_STREAM_TX;
|
|
Jerome Coutant |
1:2371382139dd
|
369
|
/* Set the parameters to be configured */
|
|
Jerome Coutant |
1:2371382139dd
|
370
|
hdma_tx.Init.Channel = EEPROM_I2C_DMA_CHANNEL;
|
|
Jerome Coutant |
1:2371382139dd
|
371
|
hdma_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
|
Jerome Coutant |
1:2371382139dd
|
372
|
hdma_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
|
Jerome Coutant |
1:2371382139dd
|
373
|
hdma_tx.Init.MemInc = DMA_MINC_ENABLE;
|
|
Jerome Coutant |
1:2371382139dd
|
374
|
hdma_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
|
Jerome Coutant |
1:2371382139dd
|
375
|
hdma_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
|
Jerome Coutant |
1:2371382139dd
|
376
|
hdma_tx.Init.Mode = DMA_NORMAL;
|
|
Jerome Coutant |
1:2371382139dd
|
377
|
hdma_tx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
|
|
Jerome Coutant |
1:2371382139dd
|
378
|
hdma_tx.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
|
|
Jerome Coutant |
1:2371382139dd
|
379
|
hdma_tx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
|
|
Jerome Coutant |
1:2371382139dd
|
380
|
hdma_tx.Init.MemBurst = DMA_MBURST_SINGLE;
|
|
Jerome Coutant |
1:2371382139dd
|
381
|
hdma_tx.Init.PeriphBurst = DMA_PBURST_SINGLE;
|
|
Jerome Coutant |
1:2371382139dd
|
382
|
|
|
Jerome Coutant |
1:2371382139dd
|
383
|
/* Associate the initilalized hdma_tx handle to the the pI2cHandle handle */
|
|
Jerome Coutant |
1:2371382139dd
|
384
|
__HAL_LINKDMA(pI2cHandle, hdmatx, hdma_tx);
|
|
Jerome Coutant |
1:2371382139dd
|
385
|
|
|
Jerome Coutant |
1:2371382139dd
|
386
|
/* Configure the DMA Stream */
|
|
Jerome Coutant |
1:2371382139dd
|
387
|
HAL_DMA_Init(&hdma_tx);
|
|
Jerome Coutant |
1:2371382139dd
|
388
|
|
|
Jerome Coutant |
1:2371382139dd
|
389
|
// Added for mbed
|
|
Jerome Coutant |
1:2371382139dd
|
390
|
/* Configure and enable I2C DMA TX Channel interrupt */
|
|
Jerome Coutant |
1:2371382139dd
|
391
|
//HAL_NVIC_SetPriority((IRQn_Type)(EEPROM_I2C_DMA_TX_IRQn), EEPROM_I2C_DMA_PREPRIO, 0);
|
|
Jerome Coutant |
1:2371382139dd
|
392
|
//HAL_NVIC_EnableIRQ((IRQn_Type)(EEPROM_I2C_DMA_TX_IRQn));
|
|
Jerome Coutant |
1:2371382139dd
|
393
|
// Enable interrupt
|
|
Jerome Coutant |
1:2371382139dd
|
394
|
IRQn_Type irqn = (IRQn_Type)(EEPROM_I2C_DMA_TX_IRQn);
|
|
Jerome Coutant |
1:2371382139dd
|
395
|
NVIC_ClearPendingIRQ(irqn);
|
|
Jerome Coutant |
1:2371382139dd
|
396
|
NVIC_DisableIRQ(irqn);
|
|
Jerome Coutant |
1:2371382139dd
|
397
|
NVIC_SetPriority(irqn, EEPROM_I2C_DMA_PREPRIO);
|
|
Jerome Coutant |
1:2371382139dd
|
398
|
NVIC_SetVector(irqn, (uint32_t)EEPROM_I2C_DMA_TX_IRQHandler);
|
|
Jerome Coutant |
1:2371382139dd
|
399
|
NVIC_EnableIRQ(irqn);
|
|
Jerome Coutant |
1:2371382139dd
|
400
|
|
|
Jerome Coutant |
1:2371382139dd
|
401
|
/* Configure the DMA stream for the EE I2C peripheral TX direction */
|
|
Jerome Coutant |
1:2371382139dd
|
402
|
/* Configure the DMA Stream */
|
|
Jerome Coutant |
1:2371382139dd
|
403
|
hdma_rx.Instance = EEPROM_I2C_DMA_STREAM_RX;
|
|
Jerome Coutant |
1:2371382139dd
|
404
|
/* Set the parameters to be configured */
|
|
Jerome Coutant |
1:2371382139dd
|
405
|
hdma_rx.Init.Channel = EEPROM_I2C_DMA_CHANNEL;
|
|
Jerome Coutant |
1:2371382139dd
|
406
|
hdma_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
|
Jerome Coutant |
1:2371382139dd
|
407
|
hdma_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
|
Jerome Coutant |
1:2371382139dd
|
408
|
hdma_rx.Init.MemInc = DMA_MINC_ENABLE;
|
|
Jerome Coutant |
1:2371382139dd
|
409
|
hdma_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
|
Jerome Coutant |
1:2371382139dd
|
410
|
hdma_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
|
Jerome Coutant |
1:2371382139dd
|
411
|
hdma_rx.Init.Mode = DMA_NORMAL;
|
|
Jerome Coutant |
1:2371382139dd
|
412
|
hdma_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
|
|
Jerome Coutant |
1:2371382139dd
|
413
|
hdma_rx.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
|
|
Jerome Coutant |
1:2371382139dd
|
414
|
hdma_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
|
|
Jerome Coutant |
1:2371382139dd
|
415
|
hdma_rx.Init.MemBurst = DMA_MBURST_SINGLE;
|
|
Jerome Coutant |
1:2371382139dd
|
416
|
hdma_rx.Init.PeriphBurst = DMA_PBURST_SINGLE;
|
|
Jerome Coutant |
1:2371382139dd
|
417
|
|
|
Jerome Coutant |
1:2371382139dd
|
418
|
/* Associate the initilalized hdma_rx handle to the the pI2cHandle handle*/
|
|
Jerome Coutant |
1:2371382139dd
|
419
|
__HAL_LINKDMA(pI2cHandle, hdmarx, hdma_rx);
|
|
Jerome Coutant |
1:2371382139dd
|
420
|
|
|
Jerome Coutant |
1:2371382139dd
|
421
|
/* Configure the DMA Stream */
|
|
Jerome Coutant |
1:2371382139dd
|
422
|
HAL_DMA_Init(&hdma_rx);
|
|
Jerome Coutant |
1:2371382139dd
|
423
|
|
|
Jerome Coutant |
1:2371382139dd
|
424
|
// Added for mbed
|
|
Jerome Coutant |
1:2371382139dd
|
425
|
/* Configure and enable I2C DMA RX Channel interrupt */
|
|
Jerome Coutant |
1:2371382139dd
|
426
|
//HAL_NVIC_SetPriority((IRQn_Type)(EEPROM_I2C_DMA_RX_IRQn), EEPROM_I2C_DMA_PREPRIO, 0);
|
|
Jerome Coutant |
1:2371382139dd
|
427
|
//HAL_NVIC_EnableIRQ((IRQn_Type)(EEPROM_I2C_DMA_RX_IRQn));
|
|
Jerome Coutant |
1:2371382139dd
|
428
|
// Enable interrupt
|
|
Jerome Coutant |
1:2371382139dd
|
429
|
irqn = (IRQn_Type)(EEPROM_I2C_DMA_RX_IRQn);
|
|
Jerome Coutant |
1:2371382139dd
|
430
|
NVIC_ClearPendingIRQ(irqn);
|
|
Jerome Coutant |
1:2371382139dd
|
431
|
NVIC_DisableIRQ(irqn);
|
|
Jerome Coutant |
1:2371382139dd
|
432
|
NVIC_SetPriority(irqn, EEPROM_I2C_DMA_PREPRIO);
|
|
Jerome Coutant |
1:2371382139dd
|
433
|
NVIC_SetVector(irqn, (uint32_t)EEPROM_I2C_DMA_RX_IRQHandler);
|
|
Jerome Coutant |
1:2371382139dd
|
434
|
NVIC_EnableIRQ(irqn);
|
|
Jerome Coutant |
1:2371382139dd
|
435
|
|
|
Jerome Coutant |
1:2371382139dd
|
436
|
#endif /* EE_M24LR64 */
|
|
Jerome Coutant |
1:2371382139dd
|
437
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
438
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
439
|
|
|
Jerome Coutant |
1:2371382139dd
|
440
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
441
|
* @brief I2Cx Bus initialization.
|
|
Jerome Coutant |
1:2371382139dd
|
442
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
443
|
static void I2Cx_Init(void)
|
|
Jerome Coutant |
1:2371382139dd
|
444
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
445
|
if(HAL_I2C_GetState(&EEP_I2cHandle) == HAL_I2C_STATE_RESET)
|
|
Jerome Coutant |
1:2371382139dd
|
446
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
447
|
EEP_I2cHandle.Instance = DISCOVERY_I2Cx;
|
|
Jerome Coutant |
1:2371382139dd
|
448
|
EEP_I2cHandle.Init.ClockSpeed = BSP_I2C_SPEED;
|
|
Jerome Coutant |
1:2371382139dd
|
449
|
EEP_I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
|
|
Jerome Coutant |
1:2371382139dd
|
450
|
EEP_I2cHandle.Init.OwnAddress1 = 0;
|
|
Jerome Coutant |
1:2371382139dd
|
451
|
EEP_I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
|
|
Jerome Coutant |
1:2371382139dd
|
452
|
EEP_I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
|
|
Jerome Coutant |
1:2371382139dd
|
453
|
EEP_I2cHandle.Init.OwnAddress2 = 0;
|
|
Jerome Coutant |
1:2371382139dd
|
454
|
EEP_I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
|
|
Jerome Coutant |
1:2371382139dd
|
455
|
EEP_I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
|
|
Jerome Coutant |
1:2371382139dd
|
456
|
|
|
Jerome Coutant |
1:2371382139dd
|
457
|
/* Init the I2C */
|
|
Jerome Coutant |
1:2371382139dd
|
458
|
I2Cx_MspInit(&EEP_I2cHandle);
|
|
Jerome Coutant |
1:2371382139dd
|
459
|
HAL_I2C_Init(&EEP_I2cHandle);
|
|
Jerome Coutant |
1:2371382139dd
|
460
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
461
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
462
|
|
|
Jerome Coutant |
1:2371382139dd
|
463
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
464
|
* @brief Configures Interruption pin for I2C communication.
|
|
Jerome Coutant |
1:2371382139dd
|
465
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
466
|
static void I2Cx_ITConfig(void)
|
|
Jerome Coutant |
1:2371382139dd
|
467
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
468
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
Jerome Coutant |
1:2371382139dd
|
469
|
|
|
Jerome Coutant |
1:2371382139dd
|
470
|
/* Enable the GPIO EXTI Clock */
|
|
Jerome Coutant |
1:2371382139dd
|
471
|
STMPE811_INT_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
472
|
|
|
Jerome Coutant |
1:2371382139dd
|
473
|
GPIO_InitStruct.Pin = STMPE811_INT_PIN;
|
|
Jerome Coutant |
1:2371382139dd
|
474
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
Jerome Coutant |
1:2371382139dd
|
475
|
GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
Jerome Coutant |
1:2371382139dd
|
476
|
GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
|
|
Jerome Coutant |
1:2371382139dd
|
477
|
HAL_GPIO_Init(STMPE811_INT_GPIO_PORT, &GPIO_InitStruct);
|
|
Jerome Coutant |
1:2371382139dd
|
478
|
|
|
Jerome Coutant |
1:2371382139dd
|
479
|
/* Enable and set GPIO EXTI Interrupt to the highest priority */
|
|
Jerome Coutant |
1:2371382139dd
|
480
|
HAL_NVIC_SetPriority((IRQn_Type)(STMPE811_INT_EXTI), 0x0F, 0x00);
|
|
Jerome Coutant |
1:2371382139dd
|
481
|
HAL_NVIC_EnableIRQ((IRQn_Type)(STMPE811_INT_EXTI));
|
|
Jerome Coutant |
1:2371382139dd
|
482
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
483
|
|
|
Jerome Coutant |
1:2371382139dd
|
484
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
485
|
* @brief Writes a value in a register of the device through BUS.
|
|
Jerome Coutant |
1:2371382139dd
|
486
|
* @param Addr: Device address on BUS Bus.
|
|
Jerome Coutant |
1:2371382139dd
|
487
|
* @param Reg: The target register address to write
|
|
Jerome Coutant |
1:2371382139dd
|
488
|
* @param Value: The target register value to be written
|
|
Jerome Coutant |
1:2371382139dd
|
489
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
490
|
static void I2Cx_WriteData(uint8_t Addr, uint8_t Reg, uint8_t Value)
|
|
Jerome Coutant |
1:2371382139dd
|
491
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
492
|
HAL_StatusTypeDef status = HAL_OK;
|
|
Jerome Coutant |
1:2371382139dd
|
493
|
|
|
Jerome Coutant |
1:2371382139dd
|
494
|
status = HAL_I2C_Mem_Write(&EEP_I2cHandle, Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, &Value, 1, I2cxTimeout);
|
|
Jerome Coutant |
1:2371382139dd
|
495
|
|
|
Jerome Coutant |
1:2371382139dd
|
496
|
/* Check the communication status */
|
|
Jerome Coutant |
1:2371382139dd
|
497
|
if(status != HAL_OK)
|
|
Jerome Coutant |
1:2371382139dd
|
498
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
499
|
/* Re-Initialize the BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
500
|
I2Cx_Error();
|
|
Jerome Coutant |
1:2371382139dd
|
501
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
502
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
503
|
|
|
Jerome Coutant |
1:2371382139dd
|
504
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
505
|
* @brief Writes a value in a register of the device through BUS.
|
|
Jerome Coutant |
1:2371382139dd
|
506
|
* @param Addr: Device address on BUS Bus.
|
|
Jerome Coutant |
1:2371382139dd
|
507
|
* @param Reg: The target register address to write
|
|
Jerome Coutant |
1:2371382139dd
|
508
|
* @param pBuffer: The target register value to be written
|
|
Jerome Coutant |
1:2371382139dd
|
509
|
* @param Length: buffer size to be written
|
|
Jerome Coutant |
1:2371382139dd
|
510
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
511
|
static void I2Cx_WriteBuffer(uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length)
|
|
Jerome Coutant |
1:2371382139dd
|
512
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
513
|
HAL_StatusTypeDef status = HAL_OK;
|
|
Jerome Coutant |
1:2371382139dd
|
514
|
|
|
Jerome Coutant |
1:2371382139dd
|
515
|
status = HAL_I2C_Mem_Write(&EEP_I2cHandle, Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, pBuffer, Length, I2cxTimeout);
|
|
Jerome Coutant |
1:2371382139dd
|
516
|
|
|
Jerome Coutant |
1:2371382139dd
|
517
|
/* Check the communication status */
|
|
Jerome Coutant |
1:2371382139dd
|
518
|
if(status != HAL_OK)
|
|
Jerome Coutant |
1:2371382139dd
|
519
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
520
|
/* Re-Initialize the BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
521
|
I2Cx_Error();
|
|
Jerome Coutant |
1:2371382139dd
|
522
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
523
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
524
|
|
|
Jerome Coutant |
1:2371382139dd
|
525
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
526
|
* @brief Reads a register of the device through BUS.
|
|
Jerome Coutant |
1:2371382139dd
|
527
|
* @param Addr: Device address on BUS Bus.
|
|
Jerome Coutant |
1:2371382139dd
|
528
|
* @param Reg: The target register address to write
|
|
Jerome Coutant |
1:2371382139dd
|
529
|
* @retval Data read at register address
|
|
Jerome Coutant |
1:2371382139dd
|
530
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
531
|
static uint8_t I2Cx_ReadData(uint8_t Addr, uint8_t Reg)
|
|
Jerome Coutant |
1:2371382139dd
|
532
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
533
|
HAL_StatusTypeDef status = HAL_OK;
|
|
Jerome Coutant |
1:2371382139dd
|
534
|
uint8_t value = 0;
|
|
Jerome Coutant |
1:2371382139dd
|
535
|
|
|
Jerome Coutant |
1:2371382139dd
|
536
|
status = HAL_I2C_Mem_Read(&EEP_I2cHandle, Addr, Reg, I2C_MEMADD_SIZE_8BIT, &value, 1, I2cxTimeout);
|
|
Jerome Coutant |
1:2371382139dd
|
537
|
|
|
Jerome Coutant |
1:2371382139dd
|
538
|
/* Check the communication status */
|
|
Jerome Coutant |
1:2371382139dd
|
539
|
if(status != HAL_OK)
|
|
Jerome Coutant |
1:2371382139dd
|
540
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
541
|
/* Re-Initialize the BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
542
|
I2Cx_Error();
|
|
Jerome Coutant |
1:2371382139dd
|
543
|
|
|
Jerome Coutant |
1:2371382139dd
|
544
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
545
|
return value;
|
|
Jerome Coutant |
1:2371382139dd
|
546
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
547
|
|
|
Jerome Coutant |
1:2371382139dd
|
548
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
549
|
* @brief Reads multiple data on the BUS.
|
|
Jerome Coutant |
1:2371382139dd
|
550
|
* @param Addr: I2C Address
|
|
Jerome Coutant |
1:2371382139dd
|
551
|
* @param Reg: Reg Address
|
|
Jerome Coutant |
1:2371382139dd
|
552
|
* @param pBuffer: pointer to read data buffer
|
|
Jerome Coutant |
1:2371382139dd
|
553
|
* @param Length: length of the data
|
|
Jerome Coutant |
1:2371382139dd
|
554
|
* @retval 0 if no problems to read multiple data
|
|
Jerome Coutant |
1:2371382139dd
|
555
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
556
|
static uint8_t I2Cx_ReadBuffer(uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length)
|
|
Jerome Coutant |
1:2371382139dd
|
557
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
558
|
HAL_StatusTypeDef status = HAL_OK;
|
|
Jerome Coutant |
1:2371382139dd
|
559
|
|
|
Jerome Coutant |
1:2371382139dd
|
560
|
status = HAL_I2C_Mem_Read(&EEP_I2cHandle, Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, pBuffer, Length, I2cxTimeout);
|
|
Jerome Coutant |
1:2371382139dd
|
561
|
|
|
Jerome Coutant |
1:2371382139dd
|
562
|
/* Check the communication status */
|
|
Jerome Coutant |
1:2371382139dd
|
563
|
if(status == HAL_OK)
|
|
Jerome Coutant |
1:2371382139dd
|
564
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
565
|
return 0;
|
|
Jerome Coutant |
1:2371382139dd
|
566
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
567
|
else
|
|
Jerome Coutant |
1:2371382139dd
|
568
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
569
|
/* Re-Initialize the BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
570
|
I2Cx_Error();
|
|
Jerome Coutant |
1:2371382139dd
|
571
|
|
|
Jerome Coutant |
1:2371382139dd
|
572
|
return 1;
|
|
Jerome Coutant |
1:2371382139dd
|
573
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
574
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
575
|
|
|
Jerome Coutant |
1:2371382139dd
|
576
|
#ifdef EE_M24LR64
|
|
Jerome Coutant |
1:2371382139dd
|
577
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
578
|
* @brief Writes a value in a register of the device through BUS in using DMA mode.
|
|
Jerome Coutant |
1:2371382139dd
|
579
|
* @param Addr: Device address on BUS Bus.
|
|
Jerome Coutant |
1:2371382139dd
|
580
|
* @param Reg: The target register address to write
|
|
Jerome Coutant |
1:2371382139dd
|
581
|
* @param pBuffer: The target register value to be written
|
|
Jerome Coutant |
1:2371382139dd
|
582
|
* @param Length: buffer size to be written
|
|
Jerome Coutant |
1:2371382139dd
|
583
|
* @retval HAL status
|
|
Jerome Coutant |
1:2371382139dd
|
584
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
585
|
static HAL_StatusTypeDef I2Cx_WriteBufferDMA(uint8_t Addr, uint16_t Reg, uint8_t *pBuffer, uint16_t Length)
|
|
Jerome Coutant |
1:2371382139dd
|
586
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
587
|
HAL_StatusTypeDef status = HAL_OK;
|
|
Jerome Coutant |
1:2371382139dd
|
588
|
|
|
Jerome Coutant |
1:2371382139dd
|
589
|
status = HAL_I2C_Mem_Write_DMA(&EEP_I2cHandle, Addr, Reg, I2C_MEMADD_SIZE_16BIT, pBuffer, Length);
|
|
Jerome Coutant |
1:2371382139dd
|
590
|
|
|
Jerome Coutant |
1:2371382139dd
|
591
|
/* Check the communication status */
|
|
Jerome Coutant |
1:2371382139dd
|
592
|
if(status != HAL_OK)
|
|
Jerome Coutant |
1:2371382139dd
|
593
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
594
|
/* Re-Initialize the BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
595
|
I2Cx_Error();
|
|
Jerome Coutant |
1:2371382139dd
|
596
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
597
|
|
|
Jerome Coutant |
1:2371382139dd
|
598
|
return status;
|
|
Jerome Coutant |
1:2371382139dd
|
599
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
600
|
|
|
Jerome Coutant |
1:2371382139dd
|
601
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
602
|
* @brief Reads multiple data on the BUS in using DMA mode.
|
|
Jerome Coutant |
1:2371382139dd
|
603
|
* @param Addr: I2C Address
|
|
Jerome Coutant |
1:2371382139dd
|
604
|
* @param Reg: Reg Address
|
|
Jerome Coutant |
1:2371382139dd
|
605
|
* @param pBuffer: pointer to read data buffer
|
|
Jerome Coutant |
1:2371382139dd
|
606
|
* @param Length: length of the data
|
|
Jerome Coutant |
1:2371382139dd
|
607
|
* @retval HAL status
|
|
Jerome Coutant |
1:2371382139dd
|
608
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
609
|
static HAL_StatusTypeDef I2Cx_ReadBufferDMA(uint8_t Addr, uint16_t Reg, uint8_t *pBuffer, uint16_t Length)
|
|
Jerome Coutant |
1:2371382139dd
|
610
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
611
|
HAL_StatusTypeDef status = HAL_OK;
|
|
Jerome Coutant |
1:2371382139dd
|
612
|
|
|
Jerome Coutant |
1:2371382139dd
|
613
|
status = HAL_I2C_Mem_Read_DMA(&EEP_I2cHandle, Addr, Reg, I2C_MEMADD_SIZE_16BIT, pBuffer, Length);
|
|
Jerome Coutant |
1:2371382139dd
|
614
|
|
|
Jerome Coutant |
1:2371382139dd
|
615
|
/* Check the communication status */
|
|
Jerome Coutant |
1:2371382139dd
|
616
|
if(status != HAL_OK)
|
|
Jerome Coutant |
1:2371382139dd
|
617
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
618
|
/* Re-Initialize the BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
619
|
I2Cx_Error();
|
|
Jerome Coutant |
1:2371382139dd
|
620
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
621
|
|
|
Jerome Coutant |
1:2371382139dd
|
622
|
return status;
|
|
Jerome Coutant |
1:2371382139dd
|
623
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
624
|
|
|
Jerome Coutant |
1:2371382139dd
|
625
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
626
|
* @brief Checks if target device is ready for communication.
|
|
Jerome Coutant |
1:2371382139dd
|
627
|
* @note This function is used with Memory devices
|
|
Jerome Coutant |
1:2371382139dd
|
628
|
* @param DevAddress: Target device address
|
|
Jerome Coutant |
1:2371382139dd
|
629
|
* @param Trials: Number of trials
|
|
Jerome Coutant |
1:2371382139dd
|
630
|
* @retval HAL status
|
|
Jerome Coutant |
1:2371382139dd
|
631
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
632
|
static HAL_StatusTypeDef I2Cx_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
|
|
Jerome Coutant |
1:2371382139dd
|
633
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
634
|
return (HAL_I2C_IsDeviceReady(&EEP_I2cHandle, DevAddress, Trials, I2cxTimeout));
|
|
Jerome Coutant |
1:2371382139dd
|
635
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
636
|
#endif /* EE_M24LR64 */
|
|
Jerome Coutant |
1:2371382139dd
|
637
|
|
|
Jerome Coutant |
1:2371382139dd
|
638
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
639
|
* @brief I2Cx error treatment function
|
|
Jerome Coutant |
1:2371382139dd
|
640
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
641
|
static void I2Cx_Error(void)
|
|
Jerome Coutant |
1:2371382139dd
|
642
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
643
|
/* De-initialize the I2C communication BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
644
|
HAL_I2C_DeInit(&EEP_I2cHandle);
|
|
Jerome Coutant |
1:2371382139dd
|
645
|
|
|
Jerome Coutant |
1:2371382139dd
|
646
|
/* Re-Initialize the I2C communication BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
647
|
I2Cx_Init();
|
|
Jerome Coutant |
1:2371382139dd
|
648
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
649
|
|
|
Jerome Coutant |
1:2371382139dd
|
650
|
/******************************* SPI Routines *********************************/
|
|
Jerome Coutant |
1:2371382139dd
|
651
|
|
|
Jerome Coutant |
1:2371382139dd
|
652
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
653
|
* @brief SPIx Bus initialization
|
|
Jerome Coutant |
1:2371382139dd
|
654
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
655
|
static void SPIx_Init(void)
|
|
Jerome Coutant |
1:2371382139dd
|
656
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
657
|
if(HAL_SPI_GetState(&SpiHandle) == HAL_SPI_STATE_RESET)
|
|
Jerome Coutant |
1:2371382139dd
|
658
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
659
|
/* SPI configuration -----------------------------------------------------*/
|
|
Jerome Coutant |
1:2371382139dd
|
660
|
SpiHandle.Instance = DISCOVERY_SPIx;
|
|
Jerome Coutant |
1:2371382139dd
|
661
|
/* SPI baudrate is set to 5.6 MHz (PCLK2/SPI_BaudRatePrescaler = 90/16 = 5.625 MHz)
|
|
Jerome Coutant |
1:2371382139dd
|
662
|
to verify these constraints:
|
|
Jerome Coutant |
1:2371382139dd
|
663
|
- ILI9341 LCD SPI interface max baudrate is 10MHz for write and 6.66MHz for read
|
|
Jerome Coutant |
1:2371382139dd
|
664
|
- l3gd20 SPI interface max baudrate is 10MHz for write/read
|
|
Jerome Coutant |
1:2371382139dd
|
665
|
- PCLK2 frequency is set to 90 MHz
|
|
Jerome Coutant |
1:2371382139dd
|
666
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
667
|
SpiHandle.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
|
|
Jerome Coutant |
1:2371382139dd
|
668
|
|
|
Jerome Coutant |
1:2371382139dd
|
669
|
/* On STM32F429I-Discovery, LCD ID cannot be read then keep a common configuration */
|
|
Jerome Coutant |
1:2371382139dd
|
670
|
/* for LCD and GYRO (SPI_DIRECTION_2LINES) */
|
|
Jerome Coutant |
1:2371382139dd
|
671
|
/* Note: To read a register a LCD, SPI_DIRECTION_1LINE should be set */
|
|
Jerome Coutant |
1:2371382139dd
|
672
|
SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
|
|
Jerome Coutant |
1:2371382139dd
|
673
|
SpiHandle.Init.CLKPhase = SPI_PHASE_1EDGE;
|
|
Jerome Coutant |
1:2371382139dd
|
674
|
SpiHandle.Init.CLKPolarity = SPI_POLARITY_LOW;
|
|
Jerome Coutant |
1:2371382139dd
|
675
|
SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
|
|
Jerome Coutant |
1:2371382139dd
|
676
|
SpiHandle.Init.CRCPolynomial = 7;
|
|
Jerome Coutant |
1:2371382139dd
|
677
|
SpiHandle.Init.DataSize = SPI_DATASIZE_8BIT;
|
|
Jerome Coutant |
1:2371382139dd
|
678
|
SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
|
Jerome Coutant |
1:2371382139dd
|
679
|
SpiHandle.Init.NSS = SPI_NSS_SOFT;
|
|
Jerome Coutant |
1:2371382139dd
|
680
|
SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
|
|
Jerome Coutant |
1:2371382139dd
|
681
|
SpiHandle.Init.Mode = SPI_MODE_MASTER;
|
|
Jerome Coutant |
1:2371382139dd
|
682
|
|
|
Jerome Coutant |
1:2371382139dd
|
683
|
SPIx_MspInit(&SpiHandle);
|
|
Jerome Coutant |
1:2371382139dd
|
684
|
HAL_SPI_Init(&SpiHandle);
|
|
Jerome Coutant |
1:2371382139dd
|
685
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
686
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
687
|
|
|
Jerome Coutant |
1:2371382139dd
|
688
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
689
|
* @brief Reads 4 bytes from device.
|
|
Jerome Coutant |
1:2371382139dd
|
690
|
* @param ReadSize: Number of bytes to read (max 4 bytes)
|
|
Jerome Coutant |
1:2371382139dd
|
691
|
* @retval Value read on the SPI
|
|
Jerome Coutant |
1:2371382139dd
|
692
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
693
|
static uint32_t SPIx_Read(uint8_t ReadSize)
|
|
Jerome Coutant |
1:2371382139dd
|
694
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
695
|
HAL_StatusTypeDef status = HAL_OK;
|
|
Jerome Coutant |
1:2371382139dd
|
696
|
uint32_t readvalue;
|
|
Jerome Coutant |
1:2371382139dd
|
697
|
|
|
Jerome Coutant |
1:2371382139dd
|
698
|
status = HAL_SPI_Receive(&SpiHandle, (uint8_t*) &readvalue, ReadSize, SpixTimeout);
|
|
Jerome Coutant |
1:2371382139dd
|
699
|
|
|
Jerome Coutant |
1:2371382139dd
|
700
|
/* Check the communication status */
|
|
Jerome Coutant |
1:2371382139dd
|
701
|
if(status != HAL_OK)
|
|
Jerome Coutant |
1:2371382139dd
|
702
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
703
|
/* Re-Initialize the BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
704
|
SPIx_Error();
|
|
Jerome Coutant |
1:2371382139dd
|
705
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
706
|
|
|
Jerome Coutant |
1:2371382139dd
|
707
|
return readvalue;
|
|
Jerome Coutant |
1:2371382139dd
|
708
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
709
|
|
|
Jerome Coutant |
1:2371382139dd
|
710
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
711
|
* @brief Writes a byte to device.
|
|
Jerome Coutant |
1:2371382139dd
|
712
|
* @param Value: value to be written
|
|
Jerome Coutant |
1:2371382139dd
|
713
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
714
|
static void SPIx_Write(uint16_t Value)
|
|
Jerome Coutant |
1:2371382139dd
|
715
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
716
|
HAL_StatusTypeDef status = HAL_OK;
|
|
Jerome Coutant |
1:2371382139dd
|
717
|
|
|
Jerome Coutant |
1:2371382139dd
|
718
|
status = HAL_SPI_Transmit(&SpiHandle, (uint8_t*) &Value, 1, SpixTimeout);
|
|
Jerome Coutant |
1:2371382139dd
|
719
|
|
|
Jerome Coutant |
1:2371382139dd
|
720
|
/* Check the communication status */
|
|
Jerome Coutant |
1:2371382139dd
|
721
|
if(status != HAL_OK)
|
|
Jerome Coutant |
1:2371382139dd
|
722
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
723
|
/* Re-Initialize the BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
724
|
SPIx_Error();
|
|
Jerome Coutant |
1:2371382139dd
|
725
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
726
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
727
|
|
|
Jerome Coutant |
1:2371382139dd
|
728
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
729
|
* @brief Sends a Byte through the SPI interface and return the Byte received
|
|
Jerome Coutant |
1:2371382139dd
|
730
|
* from the SPI bus.
|
|
Jerome Coutant |
1:2371382139dd
|
731
|
* @param Byte: Byte send.
|
|
Jerome Coutant |
1:2371382139dd
|
732
|
* @retval The received byte value
|
|
Jerome Coutant |
1:2371382139dd
|
733
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
734
|
static uint8_t SPIx_WriteRead(uint8_t Byte)
|
|
Jerome Coutant |
1:2371382139dd
|
735
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
736
|
uint8_t receivedbyte = 0;
|
|
Jerome Coutant |
1:2371382139dd
|
737
|
|
|
Jerome Coutant |
1:2371382139dd
|
738
|
/* Send a Byte through the SPI peripheral */
|
|
Jerome Coutant |
1:2371382139dd
|
739
|
/* Read byte from the SPI bus */
|
|
Jerome Coutant |
1:2371382139dd
|
740
|
if(HAL_SPI_TransmitReceive(&SpiHandle, (uint8_t*) &Byte, (uint8_t*) &receivedbyte, 1, SpixTimeout) != HAL_OK)
|
|
Jerome Coutant |
1:2371382139dd
|
741
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
742
|
SPIx_Error();
|
|
Jerome Coutant |
1:2371382139dd
|
743
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
744
|
|
|
Jerome Coutant |
1:2371382139dd
|
745
|
return receivedbyte;
|
|
Jerome Coutant |
1:2371382139dd
|
746
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
747
|
|
|
Jerome Coutant |
1:2371382139dd
|
748
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
749
|
* @brief SPIx error treatment function.
|
|
Jerome Coutant |
1:2371382139dd
|
750
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
751
|
static void SPIx_Error(void)
|
|
Jerome Coutant |
1:2371382139dd
|
752
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
753
|
/* De-initialize the SPI communication BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
754
|
HAL_SPI_DeInit(&SpiHandle);
|
|
Jerome Coutant |
1:2371382139dd
|
755
|
|
|
Jerome Coutant |
1:2371382139dd
|
756
|
/* Re- Initialize the SPI communication BUS */
|
|
Jerome Coutant |
1:2371382139dd
|
757
|
SPIx_Init();
|
|
Jerome Coutant |
1:2371382139dd
|
758
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
759
|
|
|
Jerome Coutant |
1:2371382139dd
|
760
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
761
|
* @brief SPI MSP Init.
|
|
Jerome Coutant |
1:2371382139dd
|
762
|
* @param hspi: SPI handle
|
|
Jerome Coutant |
1:2371382139dd
|
763
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
764
|
static void SPIx_MspInit(SPI_HandleTypeDef *hspi)
|
|
Jerome Coutant |
1:2371382139dd
|
765
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
766
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
Jerome Coutant |
1:2371382139dd
|
767
|
|
|
Jerome Coutant |
1:2371382139dd
|
768
|
/* Enable SPIx clock */
|
|
Jerome Coutant |
1:2371382139dd
|
769
|
DISCOVERY_SPIx_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
770
|
|
|
Jerome Coutant |
1:2371382139dd
|
771
|
/* Enable DISCOVERY_SPI GPIO clock */
|
|
Jerome Coutant |
1:2371382139dd
|
772
|
DISCOVERY_SPIx_GPIO_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
773
|
|
|
Jerome Coutant |
1:2371382139dd
|
774
|
/* configure SPI SCK, MOSI and MISO */
|
|
Jerome Coutant |
1:2371382139dd
|
775
|
GPIO_InitStructure.Pin = (DISCOVERY_SPIx_SCK_PIN | DISCOVERY_SPIx_MOSI_PIN | DISCOVERY_SPIx_MISO_PIN);
|
|
Jerome Coutant |
1:2371382139dd
|
776
|
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
|
|
Jerome Coutant |
1:2371382139dd
|
777
|
GPIO_InitStructure.Pull = GPIO_PULLDOWN;
|
|
Jerome Coutant |
1:2371382139dd
|
778
|
GPIO_InitStructure.Speed = GPIO_SPEED_MEDIUM;
|
|
Jerome Coutant |
1:2371382139dd
|
779
|
GPIO_InitStructure.Alternate = DISCOVERY_SPIx_AF;
|
|
Jerome Coutant |
1:2371382139dd
|
780
|
HAL_GPIO_Init(DISCOVERY_SPIx_GPIO_PORT, &GPIO_InitStructure);
|
|
Jerome Coutant |
1:2371382139dd
|
781
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
782
|
|
|
Jerome Coutant |
1:2371382139dd
|
783
|
/********************************* LINK LCD ***********************************/
|
|
Jerome Coutant |
1:2371382139dd
|
784
|
|
|
Jerome Coutant |
1:2371382139dd
|
785
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
786
|
* @brief Configures the LCD_SPI interface.
|
|
Jerome Coutant |
1:2371382139dd
|
787
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
788
|
void LCD_IO_Init(void)
|
|
Jerome Coutant |
1:2371382139dd
|
789
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
790
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
Jerome Coutant |
1:2371382139dd
|
791
|
|
|
Jerome Coutant |
1:2371382139dd
|
792
|
if(Is_LCD_IO_Initialized == 0)
|
|
Jerome Coutant |
1:2371382139dd
|
793
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
794
|
Is_LCD_IO_Initialized = 1;
|
|
Jerome Coutant |
1:2371382139dd
|
795
|
|
|
Jerome Coutant |
1:2371382139dd
|
796
|
/* Configure NCS in Output Push-Pull mode */
|
|
Jerome Coutant |
1:2371382139dd
|
797
|
LCD_WRX_GPIO_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
798
|
GPIO_InitStructure.Pin = LCD_WRX_PIN;
|
|
Jerome Coutant |
1:2371382139dd
|
799
|
GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
|
|
Jerome Coutant |
1:2371382139dd
|
800
|
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
|
Jerome Coutant |
1:2371382139dd
|
801
|
GPIO_InitStructure.Speed = GPIO_SPEED_FAST;
|
|
Jerome Coutant |
1:2371382139dd
|
802
|
HAL_GPIO_Init(LCD_WRX_GPIO_PORT, &GPIO_InitStructure);
|
|
Jerome Coutant |
1:2371382139dd
|
803
|
|
|
Jerome Coutant |
1:2371382139dd
|
804
|
LCD_RDX_GPIO_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
805
|
GPIO_InitStructure.Pin = LCD_RDX_PIN;
|
|
Jerome Coutant |
1:2371382139dd
|
806
|
GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
|
|
Jerome Coutant |
1:2371382139dd
|
807
|
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
|
Jerome Coutant |
1:2371382139dd
|
808
|
GPIO_InitStructure.Speed = GPIO_SPEED_FAST;
|
|
Jerome Coutant |
1:2371382139dd
|
809
|
HAL_GPIO_Init(LCD_RDX_GPIO_PORT, &GPIO_InitStructure);
|
|
Jerome Coutant |
1:2371382139dd
|
810
|
|
|
Jerome Coutant |
1:2371382139dd
|
811
|
/* Configure the LCD Control pins ----------------------------------------*/
|
|
Jerome Coutant |
1:2371382139dd
|
812
|
LCD_NCS_GPIO_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
813
|
|
|
Jerome Coutant |
1:2371382139dd
|
814
|
/* Configure NCS in Output Push-Pull mode */
|
|
Jerome Coutant |
1:2371382139dd
|
815
|
GPIO_InitStructure.Pin = LCD_NCS_PIN;
|
|
Jerome Coutant |
1:2371382139dd
|
816
|
GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
|
|
Jerome Coutant |
1:2371382139dd
|
817
|
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
|
Jerome Coutant |
1:2371382139dd
|
818
|
GPIO_InitStructure.Speed = GPIO_SPEED_FAST;
|
|
Jerome Coutant |
1:2371382139dd
|
819
|
HAL_GPIO_Init(LCD_NCS_GPIO_PORT, &GPIO_InitStructure);
|
|
Jerome Coutant |
1:2371382139dd
|
820
|
|
|
Jerome Coutant |
1:2371382139dd
|
821
|
/* Set or Reset the control line */
|
|
Jerome Coutant |
1:2371382139dd
|
822
|
LCD_CS_LOW();
|
|
Jerome Coutant |
1:2371382139dd
|
823
|
LCD_CS_HIGH();
|
|
Jerome Coutant |
1:2371382139dd
|
824
|
|
|
Jerome Coutant |
1:2371382139dd
|
825
|
SPIx_Init();
|
|
Jerome Coutant |
1:2371382139dd
|
826
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
827
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
828
|
|
|
Jerome Coutant |
1:2371382139dd
|
829
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
830
|
* @brief Writes register value.
|
|
Jerome Coutant |
1:2371382139dd
|
831
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
832
|
void LCD_IO_WriteData(uint16_t RegValue)
|
|
Jerome Coutant |
1:2371382139dd
|
833
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
834
|
/* Set WRX to send data */
|
|
Jerome Coutant |
1:2371382139dd
|
835
|
LCD_WRX_HIGH();
|
|
Jerome Coutant |
1:2371382139dd
|
836
|
|
|
Jerome Coutant |
1:2371382139dd
|
837
|
/* Reset LCD control line(/CS) and Send data */
|
|
Jerome Coutant |
1:2371382139dd
|
838
|
LCD_CS_LOW();
|
|
Jerome Coutant |
1:2371382139dd
|
839
|
SPIx_Write(RegValue);
|
|
Jerome Coutant |
1:2371382139dd
|
840
|
|
|
Jerome Coutant |
1:2371382139dd
|
841
|
/* Deselect: Chip Select high */
|
|
Jerome Coutant |
1:2371382139dd
|
842
|
LCD_CS_HIGH();
|
|
Jerome Coutant |
1:2371382139dd
|
843
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
844
|
|
|
Jerome Coutant |
1:2371382139dd
|
845
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
846
|
* @brief Writes register address.
|
|
Jerome Coutant |
1:2371382139dd
|
847
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
848
|
void LCD_IO_WriteReg(uint8_t Reg)
|
|
Jerome Coutant |
1:2371382139dd
|
849
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
850
|
/* Reset WRX to send command */
|
|
Jerome Coutant |
1:2371382139dd
|
851
|
LCD_WRX_LOW();
|
|
Jerome Coutant |
1:2371382139dd
|
852
|
|
|
Jerome Coutant |
1:2371382139dd
|
853
|
/* Reset LCD control line(/CS) and Send command */
|
|
Jerome Coutant |
1:2371382139dd
|
854
|
LCD_CS_LOW();
|
|
Jerome Coutant |
1:2371382139dd
|
855
|
SPIx_Write(Reg);
|
|
Jerome Coutant |
1:2371382139dd
|
856
|
|
|
Jerome Coutant |
1:2371382139dd
|
857
|
/* Deselect: Chip Select high */
|
|
Jerome Coutant |
1:2371382139dd
|
858
|
LCD_CS_HIGH();
|
|
Jerome Coutant |
1:2371382139dd
|
859
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
860
|
|
|
Jerome Coutant |
1:2371382139dd
|
861
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
862
|
* @brief Reads register value.
|
|
Jerome Coutant |
1:2371382139dd
|
863
|
* @param RegValue Address of the register to read
|
|
Jerome Coutant |
1:2371382139dd
|
864
|
* @param ReadSize Number of bytes to read
|
|
Jerome Coutant |
1:2371382139dd
|
865
|
* @retval Content of the register value
|
|
Jerome Coutant |
1:2371382139dd
|
866
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
867
|
uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize)
|
|
Jerome Coutant |
1:2371382139dd
|
868
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
869
|
uint32_t readvalue = 0;
|
|
Jerome Coutant |
1:2371382139dd
|
870
|
|
|
Jerome Coutant |
1:2371382139dd
|
871
|
/* Select: Chip Select low */
|
|
Jerome Coutant |
1:2371382139dd
|
872
|
LCD_CS_LOW();
|
|
Jerome Coutant |
1:2371382139dd
|
873
|
|
|
Jerome Coutant |
1:2371382139dd
|
874
|
/* Reset WRX to send command */
|
|
Jerome Coutant |
1:2371382139dd
|
875
|
LCD_WRX_LOW();
|
|
Jerome Coutant |
1:2371382139dd
|
876
|
|
|
Jerome Coutant |
1:2371382139dd
|
877
|
SPIx_Write(RegValue);
|
|
Jerome Coutant |
1:2371382139dd
|
878
|
|
|
Jerome Coutant |
1:2371382139dd
|
879
|
readvalue = SPIx_Read(ReadSize);
|
|
Jerome Coutant |
1:2371382139dd
|
880
|
|
|
Jerome Coutant |
1:2371382139dd
|
881
|
/* Set WRX to send data */
|
|
Jerome Coutant |
1:2371382139dd
|
882
|
LCD_WRX_HIGH();
|
|
Jerome Coutant |
1:2371382139dd
|
883
|
|
|
Jerome Coutant |
1:2371382139dd
|
884
|
/* Deselect: Chip Select high */
|
|
Jerome Coutant |
1:2371382139dd
|
885
|
LCD_CS_HIGH();
|
|
Jerome Coutant |
1:2371382139dd
|
886
|
|
|
Jerome Coutant |
1:2371382139dd
|
887
|
return readvalue;
|
|
Jerome Coutant |
1:2371382139dd
|
888
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
889
|
|
|
Jerome Coutant |
1:2371382139dd
|
890
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
891
|
* @brief Wait for loop in ms.
|
|
Jerome Coutant |
1:2371382139dd
|
892
|
* @param Delay in ms.
|
|
Jerome Coutant |
1:2371382139dd
|
893
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
894
|
void LCD_Delay(uint32_t Delay)
|
|
Jerome Coutant |
1:2371382139dd
|
895
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
896
|
//HAL_Delay(Delay);
|
|
Jerome Coutant |
1:2371382139dd
|
897
|
wait_ms(Delay);
|
|
Jerome Coutant |
1:2371382139dd
|
898
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
899
|
|
|
Jerome Coutant |
1:2371382139dd
|
900
|
/*******************************************************************************
|
|
Jerome Coutant |
1:2371382139dd
|
901
|
LINK OPERATIONS
|
|
Jerome Coutant |
1:2371382139dd
|
902
|
*******************************************************************************/
|
|
Jerome Coutant |
1:2371382139dd
|
903
|
|
|
Jerome Coutant |
1:2371382139dd
|
904
|
/********************************* LINK IOE ***********************************/
|
|
Jerome Coutant |
1:2371382139dd
|
905
|
|
|
Jerome Coutant |
1:2371382139dd
|
906
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
907
|
* @brief IOE Low Level Initialization.
|
|
Jerome Coutant |
1:2371382139dd
|
908
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
909
|
void IOE_Init(void)
|
|
Jerome Coutant |
1:2371382139dd
|
910
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
911
|
I2Cx_Init();
|
|
Jerome Coutant |
1:2371382139dd
|
912
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
913
|
|
|
Jerome Coutant |
1:2371382139dd
|
914
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
915
|
* @brief IOE Low Level Interrupt configuration.
|
|
Jerome Coutant |
1:2371382139dd
|
916
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
917
|
void IOE_ITConfig(void)
|
|
Jerome Coutant |
1:2371382139dd
|
918
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
919
|
I2Cx_ITConfig();
|
|
Jerome Coutant |
1:2371382139dd
|
920
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
921
|
|
|
Jerome Coutant |
1:2371382139dd
|
922
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
923
|
* @brief IOE Writes single data operation.
|
|
Jerome Coutant |
1:2371382139dd
|
924
|
* @param Addr: I2C Address
|
|
Jerome Coutant |
1:2371382139dd
|
925
|
* @param Reg: Reg Address
|
|
Jerome Coutant |
1:2371382139dd
|
926
|
* @param Value: Data to be written
|
|
Jerome Coutant |
1:2371382139dd
|
927
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
928
|
void IOE_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
|
|
Jerome Coutant |
1:2371382139dd
|
929
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
930
|
I2Cx_WriteData(Addr, Reg, Value);
|
|
Jerome Coutant |
1:2371382139dd
|
931
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
932
|
|
|
Jerome Coutant |
1:2371382139dd
|
933
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
934
|
* @brief IOE Reads single data.
|
|
Jerome Coutant |
1:2371382139dd
|
935
|
* @param Addr: I2C Address
|
|
Jerome Coutant |
1:2371382139dd
|
936
|
* @param Reg: Reg Address
|
|
Jerome Coutant |
1:2371382139dd
|
937
|
* @retval The read data
|
|
Jerome Coutant |
1:2371382139dd
|
938
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
939
|
uint8_t IOE_Read(uint8_t Addr, uint8_t Reg)
|
|
Jerome Coutant |
1:2371382139dd
|
940
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
941
|
return I2Cx_ReadData(Addr, Reg);
|
|
Jerome Coutant |
1:2371382139dd
|
942
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
943
|
|
|
Jerome Coutant |
1:2371382139dd
|
944
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
945
|
* @brief IOE Writes multiple data.
|
|
Jerome Coutant |
1:2371382139dd
|
946
|
* @param Addr: I2C Address
|
|
Jerome Coutant |
1:2371382139dd
|
947
|
* @param Reg: Reg Address
|
|
Jerome Coutant |
1:2371382139dd
|
948
|
* @param pBuffer: pointer to data buffer
|
|
Jerome Coutant |
1:2371382139dd
|
949
|
* @param Length: length of the data
|
|
Jerome Coutant |
1:2371382139dd
|
950
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
951
|
void IOE_WriteMultiple(uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length)
|
|
Jerome Coutant |
1:2371382139dd
|
952
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
953
|
I2Cx_WriteBuffer(Addr, Reg, pBuffer, Length);
|
|
Jerome Coutant |
1:2371382139dd
|
954
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
955
|
|
|
Jerome Coutant |
1:2371382139dd
|
956
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
957
|
* @brief IOE Reads multiple data.
|
|
Jerome Coutant |
1:2371382139dd
|
958
|
* @param Addr: I2C Address
|
|
Jerome Coutant |
1:2371382139dd
|
959
|
* @param Reg: Reg Address
|
|
Jerome Coutant |
1:2371382139dd
|
960
|
* @param pBuffer: pointer to data buffer
|
|
Jerome Coutant |
1:2371382139dd
|
961
|
* @param Length: length of the data
|
|
Jerome Coutant |
1:2371382139dd
|
962
|
* @retval 0 if no problems to read multiple data
|
|
Jerome Coutant |
1:2371382139dd
|
963
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
964
|
uint16_t IOE_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length)
|
|
Jerome Coutant |
1:2371382139dd
|
965
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
966
|
return I2Cx_ReadBuffer(Addr, Reg, pBuffer, Length);
|
|
Jerome Coutant |
1:2371382139dd
|
967
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
968
|
|
|
Jerome Coutant |
1:2371382139dd
|
969
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
970
|
* @brief IOE Delay.
|
|
Jerome Coutant |
1:2371382139dd
|
971
|
* @param Delay in ms
|
|
Jerome Coutant |
1:2371382139dd
|
972
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
973
|
void IOE_Delay(uint32_t Delay)
|
|
Jerome Coutant |
1:2371382139dd
|
974
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
975
|
//HAL_Delay(Delay);
|
|
Jerome Coutant |
1:2371382139dd
|
976
|
wait_ms(Delay);
|
|
Jerome Coutant |
1:2371382139dd
|
977
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
978
|
|
|
Jerome Coutant |
1:2371382139dd
|
979
|
/********************************* LINK GYROSCOPE *****************************/
|
|
Jerome Coutant |
1:2371382139dd
|
980
|
|
|
Jerome Coutant |
1:2371382139dd
|
981
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
982
|
* @brief Configures the Gyroscope SPI interface.
|
|
Jerome Coutant |
1:2371382139dd
|
983
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
984
|
void GYRO_IO_Init(void)
|
|
Jerome Coutant |
1:2371382139dd
|
985
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
986
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
Jerome Coutant |
1:2371382139dd
|
987
|
|
|
Jerome Coutant |
1:2371382139dd
|
988
|
/* Configure the Gyroscope Control pins ------------------------------------*/
|
|
Jerome Coutant |
1:2371382139dd
|
989
|
/* Enable CS GPIO clock and Configure GPIO PIN for Gyroscope Chip select */
|
|
Jerome Coutant |
1:2371382139dd
|
990
|
GYRO_CS_GPIO_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
991
|
GPIO_InitStructure.Pin = GYRO_CS_PIN;
|
|
Jerome Coutant |
1:2371382139dd
|
992
|
GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
|
|
Jerome Coutant |
1:2371382139dd
|
993
|
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
|
Jerome Coutant |
1:2371382139dd
|
994
|
GPIO_InitStructure.Speed = GPIO_SPEED_MEDIUM;
|
|
Jerome Coutant |
1:2371382139dd
|
995
|
HAL_GPIO_Init(GYRO_CS_GPIO_PORT, &GPIO_InitStructure);
|
|
Jerome Coutant |
1:2371382139dd
|
996
|
|
|
Jerome Coutant |
1:2371382139dd
|
997
|
/* Deselect: Chip Select high */
|
|
Jerome Coutant |
1:2371382139dd
|
998
|
GYRO_CS_HIGH();
|
|
Jerome Coutant |
1:2371382139dd
|
999
|
|
|
Jerome Coutant |
1:2371382139dd
|
1000
|
/* Enable INT1, INT2 GPIO clock and Configure GPIO PINs to detect Interrupts */
|
|
Jerome Coutant |
1:2371382139dd
|
1001
|
GYRO_INT_GPIO_CLK_ENABLE();
|
|
Jerome Coutant |
1:2371382139dd
|
1002
|
GPIO_InitStructure.Pin = GYRO_INT1_PIN | GYRO_INT2_PIN;
|
|
Jerome Coutant |
1:2371382139dd
|
1003
|
GPIO_InitStructure.Mode = GPIO_MODE_INPUT;
|
|
Jerome Coutant |
1:2371382139dd
|
1004
|
GPIO_InitStructure.Speed = GPIO_SPEED_FAST;
|
|
Jerome Coutant |
1:2371382139dd
|
1005
|
GPIO_InitStructure.Pull= GPIO_NOPULL;
|
|
Jerome Coutant |
1:2371382139dd
|
1006
|
HAL_GPIO_Init(GYRO_INT_GPIO_PORT, &GPIO_InitStructure);
|
|
Jerome Coutant |
1:2371382139dd
|
1007
|
|
|
Jerome Coutant |
1:2371382139dd
|
1008
|
SPIx_Init();
|
|
Jerome Coutant |
1:2371382139dd
|
1009
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1010
|
|
|
Jerome Coutant |
1:2371382139dd
|
1011
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1012
|
* @brief Writes one byte to the Gyroscope.
|
|
Jerome Coutant |
1:2371382139dd
|
1013
|
* @param pBuffer: Pointer to the buffer containing the data to be written to the Gyroscope.
|
|
Jerome Coutant |
1:2371382139dd
|
1014
|
* @param WriteAddr: Gyroscope's internal address to write to.
|
|
Jerome Coutant |
1:2371382139dd
|
1015
|
* @param NumByteToWrite: Number of bytes to write.
|
|
Jerome Coutant |
1:2371382139dd
|
1016
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1017
|
void GYRO_IO_Write(uint8_t* pBuffer, uint8_t WriteAddr, uint16_t NumByteToWrite)
|
|
Jerome Coutant |
1:2371382139dd
|
1018
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1019
|
/* Configure the MS bit:
|
|
Jerome Coutant |
1:2371382139dd
|
1020
|
- When 0, the address will remain unchanged in multiple read/write commands.
|
|
Jerome Coutant |
1:2371382139dd
|
1021
|
- When 1, the address will be auto incremented in multiple read/write commands.
|
|
Jerome Coutant |
1:2371382139dd
|
1022
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1023
|
if(NumByteToWrite > 0x01)
|
|
Jerome Coutant |
1:2371382139dd
|
1024
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1025
|
WriteAddr |= (uint8_t)MULTIPLEBYTE_CMD;
|
|
Jerome Coutant |
1:2371382139dd
|
1026
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1027
|
/* Set chip select Low at the start of the transmission */
|
|
Jerome Coutant |
1:2371382139dd
|
1028
|
GYRO_CS_LOW();
|
|
Jerome Coutant |
1:2371382139dd
|
1029
|
|
|
Jerome Coutant |
1:2371382139dd
|
1030
|
/* Send the Address of the indexed register */
|
|
Jerome Coutant |
1:2371382139dd
|
1031
|
SPIx_WriteRead(WriteAddr);
|
|
Jerome Coutant |
1:2371382139dd
|
1032
|
|
|
Jerome Coutant |
1:2371382139dd
|
1033
|
/* Send the data that will be written into the device (MSB First) */
|
|
Jerome Coutant |
1:2371382139dd
|
1034
|
while(NumByteToWrite >= 0x01)
|
|
Jerome Coutant |
1:2371382139dd
|
1035
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1036
|
SPIx_WriteRead(*pBuffer);
|
|
Jerome Coutant |
1:2371382139dd
|
1037
|
NumByteToWrite--;
|
|
Jerome Coutant |
1:2371382139dd
|
1038
|
pBuffer++;
|
|
Jerome Coutant |
1:2371382139dd
|
1039
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1040
|
|
|
Jerome Coutant |
1:2371382139dd
|
1041
|
/* Set chip select High at the end of the transmission */
|
|
Jerome Coutant |
1:2371382139dd
|
1042
|
GYRO_CS_HIGH();
|
|
Jerome Coutant |
1:2371382139dd
|
1043
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1044
|
|
|
Jerome Coutant |
1:2371382139dd
|
1045
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1046
|
* @brief Reads a block of data from the Gyroscope.
|
|
Jerome Coutant |
1:2371382139dd
|
1047
|
* @param pBuffer: Pointer to the buffer that receives the data read from the Gyroscope.
|
|
Jerome Coutant |
1:2371382139dd
|
1048
|
* @param ReadAddr: Gyroscope's internal address to read from.
|
|
Jerome Coutant |
1:2371382139dd
|
1049
|
* @param NumByteToRead: Number of bytes to read from the Gyroscope.
|
|
Jerome Coutant |
1:2371382139dd
|
1050
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1051
|
void GYRO_IO_Read(uint8_t* pBuffer, uint8_t ReadAddr, uint16_t NumByteToRead)
|
|
Jerome Coutant |
1:2371382139dd
|
1052
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1053
|
if(NumByteToRead > 0x01)
|
|
Jerome Coutant |
1:2371382139dd
|
1054
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1055
|
ReadAddr |= (uint8_t)(READWRITE_CMD | MULTIPLEBYTE_CMD);
|
|
Jerome Coutant |
1:2371382139dd
|
1056
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1057
|
else
|
|
Jerome Coutant |
1:2371382139dd
|
1058
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1059
|
ReadAddr |= (uint8_t)READWRITE_CMD;
|
|
Jerome Coutant |
1:2371382139dd
|
1060
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1061
|
/* Set chip select Low at the start of the transmission */
|
|
Jerome Coutant |
1:2371382139dd
|
1062
|
GYRO_CS_LOW();
|
|
Jerome Coutant |
1:2371382139dd
|
1063
|
|
|
Jerome Coutant |
1:2371382139dd
|
1064
|
/* Send the Address of the indexed register */
|
|
Jerome Coutant |
1:2371382139dd
|
1065
|
SPIx_WriteRead(ReadAddr);
|
|
Jerome Coutant |
1:2371382139dd
|
1066
|
|
|
Jerome Coutant |
1:2371382139dd
|
1067
|
/* Receive the data that will be read from the device (MSB First) */
|
|
Jerome Coutant |
1:2371382139dd
|
1068
|
while(NumByteToRead > 0x00)
|
|
Jerome Coutant |
1:2371382139dd
|
1069
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1070
|
/* Send dummy byte (0x00) to generate the SPI clock to Gyroscope (Slave device) */
|
|
Jerome Coutant |
1:2371382139dd
|
1071
|
*pBuffer = SPIx_WriteRead(DUMMY_BYTE);
|
|
Jerome Coutant |
1:2371382139dd
|
1072
|
NumByteToRead--;
|
|
Jerome Coutant |
1:2371382139dd
|
1073
|
pBuffer++;
|
|
Jerome Coutant |
1:2371382139dd
|
1074
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1075
|
|
|
Jerome Coutant |
1:2371382139dd
|
1076
|
/* Set chip select High at the end of the transmission */
|
|
Jerome Coutant |
1:2371382139dd
|
1077
|
GYRO_CS_HIGH();
|
|
Jerome Coutant |
1:2371382139dd
|
1078
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1079
|
|
|
Jerome Coutant |
1:2371382139dd
|
1080
|
|
|
Jerome Coutant |
1:2371382139dd
|
1081
|
#ifdef EE_M24LR64
|
|
Jerome Coutant |
1:2371382139dd
|
1082
|
|
|
Jerome Coutant |
1:2371382139dd
|
1083
|
/******************************** LINK I2C EEPROM *****************************/
|
|
Jerome Coutant |
1:2371382139dd
|
1084
|
|
|
Jerome Coutant |
1:2371382139dd
|
1085
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1086
|
* @brief Initializes peripherals used by the I2C EEPROM driver.
|
|
Jerome Coutant |
1:2371382139dd
|
1087
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1088
|
void EEPROM_IO_Init(void)
|
|
Jerome Coutant |
1:2371382139dd
|
1089
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1090
|
I2Cx_Init();
|
|
Jerome Coutant |
1:2371382139dd
|
1091
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1092
|
|
|
Jerome Coutant |
1:2371382139dd
|
1093
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1094
|
* @brief Writes data to I2C EEPROM driver in using DMA channel.
|
|
Jerome Coutant |
1:2371382139dd
|
1095
|
* @param DevAddress: Target device address
|
|
Jerome Coutant |
1:2371382139dd
|
1096
|
* @param MemAddress: Internal memory address
|
|
Jerome Coutant |
1:2371382139dd
|
1097
|
* @param pBuffer: Pointer to data buffer
|
|
Jerome Coutant |
1:2371382139dd
|
1098
|
* @param BufferSize: Amount of data to be sent
|
|
Jerome Coutant |
1:2371382139dd
|
1099
|
* @retval HAL status
|
|
Jerome Coutant |
1:2371382139dd
|
1100
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1101
|
HAL_StatusTypeDef EEPROM_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
|
|
Jerome Coutant |
1:2371382139dd
|
1102
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1103
|
return (I2Cx_WriteBufferDMA(DevAddress, MemAddress, pBuffer, BufferSize));
|
|
Jerome Coutant |
1:2371382139dd
|
1104
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1105
|
|
|
Jerome Coutant |
1:2371382139dd
|
1106
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1107
|
* @brief Reads data from I2C EEPROM driver in using DMA channel.
|
|
Jerome Coutant |
1:2371382139dd
|
1108
|
* @param DevAddress: Target device address
|
|
Jerome Coutant |
1:2371382139dd
|
1109
|
* @param MemAddress: Internal memory address
|
|
Jerome Coutant |
1:2371382139dd
|
1110
|
* @param pBuffer: Pointer to data buffer
|
|
Jerome Coutant |
1:2371382139dd
|
1111
|
* @param BufferSize: Amount of data to be read
|
|
Jerome Coutant |
1:2371382139dd
|
1112
|
* @retval HAL status
|
|
Jerome Coutant |
1:2371382139dd
|
1113
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1114
|
HAL_StatusTypeDef EEPROM_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
|
|
Jerome Coutant |
1:2371382139dd
|
1115
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1116
|
return (I2Cx_ReadBufferDMA(DevAddress, MemAddress, pBuffer, BufferSize));
|
|
Jerome Coutant |
1:2371382139dd
|
1117
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1118
|
|
|
Jerome Coutant |
1:2371382139dd
|
1119
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1120
|
* @brief Checks if target device is ready for communication.
|
|
Jerome Coutant |
1:2371382139dd
|
1121
|
* @note This function is used with Memory devices
|
|
Jerome Coutant |
1:2371382139dd
|
1122
|
* @param DevAddress: Target device address
|
|
Jerome Coutant |
1:2371382139dd
|
1123
|
* @param Trials: Number of trials
|
|
Jerome Coutant |
1:2371382139dd
|
1124
|
* @retval HAL status
|
|
Jerome Coutant |
1:2371382139dd
|
1125
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1126
|
HAL_StatusTypeDef EEPROM_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
|
|
Jerome Coutant |
1:2371382139dd
|
1127
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1128
|
return (I2Cx_IsDeviceReady(DevAddress, Trials));
|
|
Jerome Coutant |
1:2371382139dd
|
1129
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1130
|
|
|
Jerome Coutant |
1:2371382139dd
|
1131
|
// Added for mbed
|
|
Jerome Coutant |
1:2371382139dd
|
1132
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1133
|
* @brief This function handles sEE DMA TX interrupt request.
|
|
Jerome Coutant |
1:2371382139dd
|
1134
|
* @param None
|
|
Jerome Coutant |
1:2371382139dd
|
1135
|
* @retval None
|
|
Jerome Coutant |
1:2371382139dd
|
1136
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1137
|
static void EEPROM_I2C_DMA_TX_IRQHandler(void)
|
|
Jerome Coutant |
1:2371382139dd
|
1138
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1139
|
HAL_DMA_IRQHandler(EEP_I2cHandle.hdmatx);
|
|
Jerome Coutant |
1:2371382139dd
|
1140
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1141
|
|
|
Jerome Coutant |
1:2371382139dd
|
1142
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1143
|
* @brief This function handles sEE DMA RX interrupt request.
|
|
Jerome Coutant |
1:2371382139dd
|
1144
|
* @param None
|
|
Jerome Coutant |
1:2371382139dd
|
1145
|
* @retval None
|
|
Jerome Coutant |
1:2371382139dd
|
1146
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1147
|
static void EEPROM_I2C_DMA_RX_IRQHandler(void)
|
|
Jerome Coutant |
1:2371382139dd
|
1148
|
{
|
|
Jerome Coutant |
1:2371382139dd
|
1149
|
HAL_DMA_IRQHandler(EEP_I2cHandle.hdmarx);
|
|
Jerome Coutant |
1:2371382139dd
|
1150
|
}
|
|
Jerome Coutant |
1:2371382139dd
|
1151
|
|
|
Jerome Coutant |
1:2371382139dd
|
1152
|
#endif /* EE_M24LR64 */
|
|
Jerome Coutant |
1:2371382139dd
|
1153
|
|
|
Jerome Coutant |
1:2371382139dd
|
1154
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1155
|
* @}
|
|
Jerome Coutant |
1:2371382139dd
|
1156
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1157
|
|
|
Jerome Coutant |
1:2371382139dd
|
1158
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1159
|
* @}
|
|
Jerome Coutant |
1:2371382139dd
|
1160
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1161
|
|
|
Jerome Coutant |
1:2371382139dd
|
1162
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1163
|
* @}
|
|
Jerome Coutant |
1:2371382139dd
|
1164
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1165
|
|
|
Jerome Coutant |
1:2371382139dd
|
1166
|
/**
|
|
Jerome Coutant |
1:2371382139dd
|
1167
|
* @}
|
|
Jerome Coutant |
1:2371382139dd
|
1168
|
*/
|
|
Jerome Coutant |
1:2371382139dd
|
1169
|
|
|
Jerome Coutant |
1:2371382139dd
|
1170
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|