SAKURA Internet


SAKURA Internet Inc.

You are viewing an older revision! See the latest version

Firmware SCO_EVB_01

Table of Contents

  1. How to update
  2. Download

How to update

This section is instruction of how to update DAPLink interface's firmware.

0. Select power source.

Select "USB" at "VIN Select" jumper.
/media/uploads/okuhara/01_evb_vin_select.png

1. Boot the Firmware update mode

Short the "SB104" with tweezers etc and plugging in USB.
/media/uploads/okuhara/02_evb_isp.png

DapLink Interface's MCU is boot the "ISP mode".

2. Update operation

Windows:

Operate with "Explorer".

  • Windows will detect a removable disk "CRP DISABLED"
    /media/uploads/okuhara/10_detect_crp-disabled.png
  • Remove the "firmware.bin"
    /media/uploads/okuhara/11_delete_firmware_bin.png
  • Copy the new firmware file to the removable disk
    /media/uploads/okuhara/12_copy_new_firmware.png
  • Eject the removable disk
  • Reconnect "CMSIS DAP" USB port
    After, the new firmware is boot.

macOS

Update operation is not possible with "Finder".
Please refer to USB-ISP tool for Mac.

Download

All wikipages