Rohm / Mbed OS rohm-bd7411g-hello

Rohm BD7411g Omnipolar Detection Hall IC hello world.

Fork of mbed-os-example-mbed5-blinky by mbed-os-examples

Diff: README.md

Revision:
12:18c2160813c6
Parent:
11:0fa38cb22ea9
diff -r 0fa38cb22ea9 -r 18c2160813c6 README.md
--- a/README.md	Fri Sep 02 15:15:05 2016 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,96 +0,0 @@
-# Getting started with Blinky on mbed OS
-
-This is a very simple guide, reviewing the steps required to get Blinky working on an mbed OS platform.
-
-Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli).
-
-## Get the example application!
-
-From the command line, import the example:
-
-```
-mbed import mbed-os-example-blinky
-cd mbed-os-example-blinky
-```
-
-### Now compile
-
-Invoke `mbed compile` specifying the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5:
-
-```
-mbed compile -m K64F -t ARM
-```
-
-Your PC may take a few minutes to compile your code. At the end you should get the following result:
-
-```
-[snip]
-+----------------------------+-------+-------+------+
-| Module                     | .text | .data | .bss |
-+----------------------------+-------+-------+------+
-| Misc                       | 13939 |    24 | 1372 |
-| core/hal                   | 16993 |    96 |  296 |
-| core/rtos                  |  7384 |    92 | 4204 |
-| features/FEATURE_IPV4      |    80 |     0 |  176 |
-| frameworks/greentea-client |  1830 |    60 |   44 |
-| frameworks/utest           |  2392 |   512 |  292 |
-| Subtotals                  | 42618 |   784 | 6384 |
-+----------------------------+-------+-------+------+
-Allocated Heap: unknown
-Allocated Stack: unknown
-Total Static RAM memory (data + bss): 7168 bytes
-Total RAM memory (data + bss + heap + stack): 7168 bytes
-Total Flash memory (text + data + misc): 43402 bytes
-Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin
-```
-
-### Program your board
-
-1. Connect your mbed device to the computer over USB.
-1. Copy the binary file to the mbed device .
-1. Press the reset button to start the program.
-
-You should see the LED of your platform turning on and off.
-
-Congratulations if you managed to complete this test!
-
-## Export the project to Keil MDK and debug your application
-
-From the command line, run the following command:
-
-```
-mbed export -m K64F -i uvision
-```
-
-You should see the following output:
-
-```
-Successful exports:
-  * K64F::uvision       .\projectfiles\uvision_K64F\Unnamed_Project
-```
-
-To debug the application:
-
-1. Start uVision.
-1. Import the uVision project generated earlier.
-1. Compile your application and generate an `.axf` file.
-1. Make sure uVision is configured to debug over CMSIS-DAP (From the Project menu > Options for Target '...' > Debug tab > Use CMSIS-DAP Debugger).
-1. Set breakpoints and start a debug session.
-
-![Image of uVision](img/uvision.png)
-
-## Troubleshooting
-
-1. Make sure `mbed-cli` is working correctly and its version is greater than `0.8.9`
-
- ```
- mbed --version
- ```
-
- If not, you can update it easily:
-
- ```
- pip install mbed-cli --upgrade
- ```
-
-2. If using Keil MDK, make sure you have a license installed. [MDK-Lite](http://www.keil.com/arm/mdk.asp) has a 32KB restriction on code size.