An example program for Rohm SensorShield-EVK-001 running with Mbed OS 5.
Dependencies: BM1422AGMV rohm-rpr0521 rohm-sensor-hal rohm-bh1790glc-driver BH1749NUC KX224-1053 BM1383AGLV RegisterWriter
Getting Started with Rohm SensorShield-EVK-001
This example demonstrates how to use the SensorShield-EVK-001 component with multiple sensors. those measured values, which received through a serial connection from a mbed board, are printed out in a terminal software window.
Setup
The SensorShield-EVK-001 is plugged on top of a mbed board and a serial connection should be set up between the mbed board and PC with the following parameters:
- baud rate: 115200
- data: 8 bit
- parity: none
- stop: 1bit
- flow control: none
Terminal parameters
Measured Data Output
Diff: KX224-1053.lib
- Revision:
- 0:a9aeed8cd62e
- Child:
- 5:f0dac0711070
diff -r 000000000000 -r a9aeed8cd62e KX224-1053.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/KX224-1053.lib Mon Feb 18 15:08:30 2019 +0900 @@ -0,0 +1,1 @@ +https://os.mbed.com/teams/Rohm/code/KX224-1053/#c447f35ff54a \ No newline at end of file