File content as of revision 3:829f081fde15:

/**
 ******************************************************************************
 * @file    x_nucleo_iks01a1_pressure.h
 * @author  MEMS Application Team
 * @version V1.0.0
 * @date    30-July-2014
 * @brief   This file contains definitions for x_nucleo_iks01a1_pressure.c
 *          firmware driver.
 ******************************************************************************
 * @attention
 *
 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *   1. Redistributions of source code must retain the above copyright notice,
 *      this list of conditions and the following disclaimer.
 *   2. Redistributions in binary form must reproduce the above copyright notice,
 *      this list of conditions and the following disclaimer in the documentation
 *      and/or other materials provided with the distribution.
 *   3. Neither the name of STMicroelectronics nor the names of its contributors
 *      may be used to endorse or promote products derived from this software
 *      without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ******************************************************************************
 */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __X_NUCLEO_IKS01A1_PRESSURE_H
#define __X_NUCLEO_IKS01A1_PRESSURE_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
//#include "x_nucleo_iks01a1.h"
/* Include UV sensor component driver */
#include "lps25h.h"

/** @addtogroup BSP
 * @{
 */

/** @addtogroup X_NUCLEO_IKS01A1
 * @{
 */

/** @addtogroup X_NUCLEO_IKS01A1_PRESSURE
 * @{
 */

/** @defgroup X_NUCLEO_IKS01A1_PRESSURE_Exported_Constants
 * @{
 */

/**
 * @addtogroup LPS25H_CS_Define
 * @{
 */
#define LPS25H_CS_Port                  GPIOH
#define LPS25H_CS_Pin                   GPIO_PIN_5
#define LPS25H_CS_GPIO_CLK_ENABLE()     __GPIOH_CLK_ENABLE()

/**
*@}
*/ /* end of group LPS25H_CS_Define */

/**
 * @}
 */

/** @defgroup X_NUCLEO_IKS01A1_PRESSURE_Exported_Macros
 * @{
 */

/**
 * @}
 */

/** @defgroup X_NUCLEO_IKS01A1_PRESSURE_Exported_Functions
 * @{
 */
/* Sensor Configuration Functions */
PRESSURE_StatusTypeDef BSP_PRESSURE_Init(void);
uint8_t BSP_PRESSURE_isInitialized(void);
void BSP_PRESSURE_Reset(void);
uint8_t BSP_PRESSURE_ReadID(void);
PRESSURE_StatusTypeDef BSP_PRESSURE_CheckID(void);
void BSP_PRESSURE_GetPressure(float* pfData);
void BSP_PRESSURE_GetTemperature(float* pfData);

/**
 * @}
 */

/**
 * @}
 */

/**
 * @}
 */

/**
 * @}
 */

#ifdef __cplusplus
}
#endif

#endif /* __X_NUCLEO_IKS01A1_PRESSURE_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/