Robotique FIP / Mbed 2 deprecated BlueNRG

Example for Bluetooth low energy interface

Dependencies:   mbed HC_SR04_Ultrasonic_Library

Sensor_Shield/lps25h.c@3:829f081fde15, 2015-05-19 (annotated)

Committer:
julientiron
Date:
Tue May 19 20:42:25 2015 +0000
Revision:
3:829f081fde15
Parent:
1:bdbf36f8408d 
hihi;

Who changed what in which revision?

UserRevisionLine numberNew contents of line
julientiron 1:bdbf36f8408d 1 /**
julientiron 1:bdbf36f8408d 2 ******************************************************************************
julientiron 1:bdbf36f8408d 3 * @file LPS25H.c
julientiron 1:bdbf36f8408d 4 * @author MEMS Application Team
julientiron 1:bdbf36f8408d 5 * @version V1.0.0
julientiron 1:bdbf36f8408d 6 * @date 30-July-2014
julientiron 1:bdbf36f8408d 7 * @brief This file provides a set of functions needed to manage the lps25h.
julientiron 1:bdbf36f8408d 8 ******************************************************************************
julientiron 1:bdbf36f8408d 9 * @attention
julientiron 1:bdbf36f8408d 10 *
julientiron 1:bdbf36f8408d 11 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
julientiron 1:bdbf36f8408d 12 *
julientiron 1:bdbf36f8408d 13 * Redistribution and use in source and binary forms, with or without modification,
julientiron 1:bdbf36f8408d 14 * are permitted provided that the following conditions are met:
julientiron 1:bdbf36f8408d 15 * 1. Redistributions of source code must retain the above copyright notice,
julientiron 1:bdbf36f8408d 16 * this list of conditions and the following disclaimer.
julientiron 1:bdbf36f8408d 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
julientiron 1:bdbf36f8408d 18 * this list of conditions and the following disclaimer in the documentation
julientiron 1:bdbf36f8408d 19 * and/or other materials provided with the distribution.
julientiron 1:bdbf36f8408d 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
julientiron 1:bdbf36f8408d 21 * may be used to endorse or promote products derived from this software
julientiron 1:bdbf36f8408d 22 * without specific prior written permission.
julientiron 1:bdbf36f8408d 23 *
julientiron 1:bdbf36f8408d 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
julientiron 1:bdbf36f8408d 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
julientiron 1:bdbf36f8408d 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
julientiron 1:bdbf36f8408d 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
julientiron 1:bdbf36f8408d 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
julientiron 1:bdbf36f8408d 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
julientiron 1:bdbf36f8408d 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
julientiron 1:bdbf36f8408d 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
julientiron 1:bdbf36f8408d 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
julientiron 1:bdbf36f8408d 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
julientiron 1:bdbf36f8408d 34 *
julientiron 1:bdbf36f8408d 35 ******************************************************************************
julientiron 1:bdbf36f8408d 36 */
julientiron 1:bdbf36f8408d 37 /* Includes ------------------------------------------------------------------*/
julientiron 1:bdbf36f8408d 38 #include "lps25h.h"
julientiron 1:bdbf36f8408d 39
julientiron 1:bdbf36f8408d 40 /** @addtogroup BSP
julientiron 1:bdbf36f8408d 41 * @{
julientiron 1:bdbf36f8408d 42 */
julientiron 1:bdbf36f8408d 43
julientiron 1:bdbf36f8408d 44 /** @addtogroup STM32F439_SENSITRON
julientiron 1:bdbf36f8408d 45 * @{
julientiron 1:bdbf36f8408d 46 */
julientiron 1:bdbf36f8408d 47
julientiron 1:bdbf36f8408d 48 /** @addtogroup LPS25H
julientiron 1:bdbf36f8408d 49 * @{
julientiron 1:bdbf36f8408d 50 */
julientiron 1:bdbf36f8408d 51
julientiron 1:bdbf36f8408d 52
julientiron 1:bdbf36f8408d 53 /** @defgroup LPS25H_Private_TypesDefinitions
julientiron 1:bdbf36f8408d 54 * @{
julientiron 1:bdbf36f8408d 55 */
julientiron 1:bdbf36f8408d 56
julientiron 1:bdbf36f8408d 57 /**
julientiron 1:bdbf36f8408d 58 * @}
julientiron 1:bdbf36f8408d 59 */
julientiron 1:bdbf36f8408d 60
julientiron 1:bdbf36f8408d 61 /** @defgroup LPS25H_Private_Defines
julientiron 1:bdbf36f8408d 62 * @{
julientiron 1:bdbf36f8408d 63 */
julientiron 1:bdbf36f8408d 64
julientiron 1:bdbf36f8408d 65 /**
julientiron 1:bdbf36f8408d 66 * @}
julientiron 1:bdbf36f8408d 67 */
julientiron 1:bdbf36f8408d 68
julientiron 1:bdbf36f8408d 69 /** @defgroup LPS25H_Private_Macros
julientiron 1:bdbf36f8408d 70 * @{
julientiron 1:bdbf36f8408d 71 */
julientiron 1:bdbf36f8408d 72
julientiron 1:bdbf36f8408d 73 /**
julientiron 1:bdbf36f8408d 74 * @}
julientiron 1:bdbf36f8408d 75 */
julientiron 1:bdbf36f8408d 76
julientiron 1:bdbf36f8408d 77 /** @defgroup LPS25H_Private_Variables
julientiron 1:bdbf36f8408d 78 * @{
julientiron 1:bdbf36f8408d 79 */
julientiron 1:bdbf36f8408d 80
julientiron 1:bdbf36f8408d 81 PRESSURE_DrvTypeDef LPS25HDrv =
julientiron 1:bdbf36f8408d 82 {
julientiron 1:bdbf36f8408d 83 LPS25H_Init,
julientiron 1:bdbf36f8408d 84 LPS25H_PowerOff,
julientiron 1:bdbf36f8408d 85 LPS25H_ReadID,
julientiron 1:bdbf36f8408d 86 LPS25H_RebootCmd,
julientiron 1:bdbf36f8408d 87 0,
julientiron 1:bdbf36f8408d 88 0,
julientiron 1:bdbf36f8408d 89 0,
julientiron 1:bdbf36f8408d 90 0,
julientiron 1:bdbf36f8408d 91 0,
julientiron 1:bdbf36f8408d 92 LPS25H_GetPressure,
julientiron 1:bdbf36f8408d 93 LPS25H_GetTemperature,
julientiron 1:bdbf36f8408d 94 LPS25H_SlaveAddrRemap
julientiron 1:bdbf36f8408d 95 };
julientiron 1:bdbf36f8408d 96
julientiron 1:bdbf36f8408d 97 uint8_t LPS25H_SlaveAddress = LPS25H_ADDRESS_LOW;
julientiron 1:bdbf36f8408d 98
julientiron 1:bdbf36f8408d 99 /**
julientiron 1:bdbf36f8408d 100 * @}
julientiron 1:bdbf36f8408d 101 */
julientiron 1:bdbf36f8408d 102
julientiron 1:bdbf36f8408d 103 /** @defgroup LPS25H_Private_FunctionPrototypes
julientiron 1:bdbf36f8408d 104 * @{
julientiron 1:bdbf36f8408d 105 */
julientiron 1:bdbf36f8408d 106
julientiron 1:bdbf36f8408d 107 /**
julientiron 1:bdbf36f8408d 108 * @brief Exit the shutdown mode for LPS25H.
julientiron 1:bdbf36f8408d 109 * @param None
julientiron 1:bdbf36f8408d 110 * @retval None
julientiron 1:bdbf36f8408d 111 */
julientiron 1:bdbf36f8408d 112 void LPS25H_PowerOn(void);
julientiron 1:bdbf36f8408d 113
julientiron 1:bdbf36f8408d 114 void LPS25H_I2C_ReadRawPressure(uint32_t *raw_press);
julientiron 1:bdbf36f8408d 115
julientiron 1:bdbf36f8408d 116 void LPS25H_I2C_ReadRawTemperature(int16_t *raw_data);
julientiron 1:bdbf36f8408d 117
julientiron 1:bdbf36f8408d 118
julientiron 1:bdbf36f8408d 119 /**
julientiron 1:bdbf36f8408d 120 * @}
julientiron 1:bdbf36f8408d 121 */
julientiron 1:bdbf36f8408d 122
julientiron 1:bdbf36f8408d 123 /** @defgroup LPS25H_Private_Functions
julientiron 1:bdbf36f8408d 124 * @{
julientiron 1:bdbf36f8408d 125 */
julientiron 1:bdbf36f8408d 126
julientiron 1:bdbf36f8408d 127
julientiron 1:bdbf36f8408d 128 /**
julientiron 1:bdbf36f8408d 129 * @brief Set LPS25H Initialization.
julientiron 1:bdbf36f8408d 130 * @param InitStruct: it contains the configuration setting for the LPS25H.
julientiron 1:bdbf36f8408d 131 * @retval Error Code (PressureError_Enum)
julientiron 1:bdbf36f8408d 132 */
julientiron 1:bdbf36f8408d 133 void LPS25H_Init(PRESSURE_InitTypeDef *LPS25H_Init)
julientiron 1:bdbf36f8408d 134 {
julientiron 1:bdbf36f8408d 135 uint8_t tmp1 = 0x00;
julientiron 1:bdbf36f8408d 136
julientiron 1:bdbf36f8408d 137 /* Configure the low level interface ---------------------------------------*/
julientiron 1:bdbf36f8408d 138 PRESSURE_IO_Init();
julientiron 1:bdbf36f8408d 139
julientiron 1:bdbf36f8408d 140 LPS25H_PowerOn();
julientiron 1:bdbf36f8408d 141
julientiron 1:bdbf36f8408d 142 PRESSURE_IO_Read(&tmp1, LPS25H_SlaveAddress, LPS25H_CTRL_REG1_ADDR, 1);
julientiron 1:bdbf36f8408d 143
julientiron 1:bdbf36f8408d 144 /* Output Data Rate selection */
julientiron 1:bdbf36f8408d 145 tmp1 &= ~(LPS25H_ODR_MASK);
julientiron 1:bdbf36f8408d 146 tmp1 |= LPS25H_Init->OutputDataRate;
julientiron 1:bdbf36f8408d 147
julientiron 1:bdbf36f8408d 148 /* Interrupt circuit selection */
julientiron 1:bdbf36f8408d 149 tmp1 &= ~(LPS25H_DIFF_EN_MASK);
julientiron 1:bdbf36f8408d 150 tmp1 |= LPS25H_Init->DiffEnable;
julientiron 1:bdbf36f8408d 151
julientiron 1:bdbf36f8408d 152 /* Block Data Update selection */
julientiron 1:bdbf36f8408d 153 tmp1 &= ~(LPS25H_BDU_MASK);
julientiron 1:bdbf36f8408d 154 tmp1 |= LPS25H_Init->BlockDataUpdate;
julientiron 1:bdbf36f8408d 155
julientiron 1:bdbf36f8408d 156 /* Serial Interface Mode selection */
julientiron 1:bdbf36f8408d 157 tmp1 &= ~(LPS25H_SPI_SIM_MASK);
julientiron 1:bdbf36f8408d 158 tmp1 |= LPS25H_Init->SPIMode;
julientiron 1:bdbf36f8408d 159
julientiron 1:bdbf36f8408d 160 PRESSURE_IO_Write(&tmp1, LPS25H_SlaveAddress, LPS25H_CTRL_REG1_ADDR, 1);
julientiron 1:bdbf36f8408d 161
julientiron 1:bdbf36f8408d 162 PRESSURE_IO_Read(&tmp1, LPS25H_SlaveAddress, LPS25H_RES_CONF_ADDR, 1);
julientiron 1:bdbf36f8408d 163
julientiron 1:bdbf36f8408d 164 /* Serial Interface Mode selection */
julientiron 1:bdbf36f8408d 165 tmp1 &= ~(LPS25H_P_RES_MASK);
julientiron 1:bdbf36f8408d 166 tmp1 |= LPS25H_Init->PressureResolution;
julientiron 1:bdbf36f8408d 167
julientiron 1:bdbf36f8408d 168 /* Serial Interface Mode selection */
julientiron 1:bdbf36f8408d 169 tmp1 &= ~(LPS25H_T_RES_MASK);
julientiron 1:bdbf36f8408d 170 tmp1 |= LPS25H_Init->TemperatureResolution;
julientiron 1:bdbf36f8408d 171
julientiron 1:bdbf36f8408d 172 PRESSURE_IO_Write(&tmp1, LPS25H_SlaveAddress, LPS25H_RES_CONF_ADDR, 1);
julientiron 1:bdbf36f8408d 173 }
julientiron 1:bdbf36f8408d 174
julientiron 1:bdbf36f8408d 175 /**
julientiron 1:bdbf36f8408d 176 * @brief Read ID address of LPS25H
julientiron 1:bdbf36f8408d 177 * @param Device ID address
julientiron 1:bdbf36f8408d 178 * @retval ID name
julientiron 1:bdbf36f8408d 179 */
julientiron 1:bdbf36f8408d 180 uint8_t LPS25H_ReadID(void)
julientiron 1:bdbf36f8408d 181 {
julientiron 1:bdbf36f8408d 182 uint8_t tmp;
julientiron 1:bdbf36f8408d 183
julientiron 1:bdbf36f8408d 184 /* Read WHO I AM register */
julientiron 1:bdbf36f8408d 185 PRESSURE_IO_Read(&tmp, LPS25H_SlaveAddress, LPS25H_WHO_AM_I_ADDR, 1);
julientiron 1:bdbf36f8408d 186
julientiron 1:bdbf36f8408d 187 /* Return the ID */
julientiron 1:bdbf36f8408d 188 return (uint8_t)tmp;
julientiron 1:bdbf36f8408d 189 }
julientiron 1:bdbf36f8408d 190
julientiron 1:bdbf36f8408d 191 /**
julientiron 1:bdbf36f8408d 192 * @brief Reboot memory content of LPS25H
julientiron 1:bdbf36f8408d 193 * @param None
julientiron 1:bdbf36f8408d 194 * @retval None
julientiron 1:bdbf36f8408d 195 */
julientiron 1:bdbf36f8408d 196 void LPS25H_RebootCmd(void)
julientiron 1:bdbf36f8408d 197 {
julientiron 1:bdbf36f8408d 198 uint8_t tmpreg;
julientiron 1:bdbf36f8408d 199
julientiron 1:bdbf36f8408d 200 /* Read CTRL_REG5 register */
julientiron 1:bdbf36f8408d 201 PRESSURE_IO_Read(&tmpreg, LPS25H_SlaveAddress, LPS25H_CTRL_REG2_ADDR, 1);
julientiron 1:bdbf36f8408d 202
julientiron 1:bdbf36f8408d 203 /* Enable or Disable the reboot memory */
julientiron 1:bdbf36f8408d 204 tmpreg |= LPS25H_RESET_MEMORY;
julientiron 1:bdbf36f8408d 205
julientiron 1:bdbf36f8408d 206 /* Write value to MEMS CTRL_REG5 regsister */
julientiron 1:bdbf36f8408d 207 PRESSURE_IO_Write(&tmpreg, LPS25H_SlaveAddress, LPS25H_CTRL_REG2_ADDR, 1);
julientiron 1:bdbf36f8408d 208 }
julientiron 1:bdbf36f8408d 209
julientiron 1:bdbf36f8408d 210
julientiron 1:bdbf36f8408d 211 /**
julientiron 1:bdbf36f8408d 212 * @brief Read LPS25H output register, and calculate the raw pressure.
julientiron 1:bdbf36f8408d 213 * @param uint32_t: raw_press. Pressure raw value.
julientiron 1:bdbf36f8408d 214 * @retval LPS25H_ERROR or LPS25H_OK.
julientiron 1:bdbf36f8408d 215 */
julientiron 1:bdbf36f8408d 216 void LPS25H_I2C_ReadRawPressure(uint32_t *raw_press)
julientiron 1:bdbf36f8408d 217 {
julientiron 1:bdbf36f8408d 218 uint8_t buffer[3], i;
julientiron 1:bdbf36f8408d 219 uint32_t tempVal=0;
julientiron 1:bdbf36f8408d 220
julientiron 1:bdbf36f8408d 221 /* Read the register content */
julientiron 1:bdbf36f8408d 222
julientiron 1:bdbf36f8408d 223 PRESSURE_IO_Read(buffer, LPS25H_SlaveAddress, LPS25H_PRESS_POUT_XL_ADDR+0x80, 3);
julientiron 1:bdbf36f8408d 224 // LPS25H_I2C_Read(LPS25H_PRESS_POUT_XL_ADDR+0x80, 3, buffer);
julientiron 1:bdbf36f8408d 225
julientiron 1:bdbf36f8408d 226 /* Build the raw data */
julientiron 1:bdbf36f8408d 227 for (i = 0 ; i < 3 ; i++)
julientiron 1:bdbf36f8408d 228 tempVal |= (((uint32_t) buffer[i]) << (8 * i));
julientiron 1:bdbf36f8408d 229
julientiron 1:bdbf36f8408d 230 /* convert the 2's complement 24 bit to 2's complement 32 bit */
julientiron 1:bdbf36f8408d 231 if (tempVal & 0x00800000)
julientiron 1:bdbf36f8408d 232 tempVal |= 0xFF000000;
julientiron 1:bdbf36f8408d 233
julientiron 1:bdbf36f8408d 234 /* return the built value */
julientiron 1:bdbf36f8408d 235 *raw_press = ((uint32_t) tempVal);
julientiron 1:bdbf36f8408d 236 }
julientiron 1:bdbf36f8408d 237
julientiron 1:bdbf36f8408d 238 /**
julientiron 1:bdbf36f8408d 239 * @brief Read LPS25H output register, and calculate the pressure in mbar.
julientiron 1:bdbf36f8408d 240 * @param float *pressure. Pressure value in mbar.
julientiron 1:bdbf36f8408d 241 * @retval LPS25H_ERROR or LPS25H_OK.
julientiron 1:bdbf36f8408d 242 */
julientiron 1:bdbf36f8408d 243 void LPS25H_GetPressure(float* pfData)
julientiron 1:bdbf36f8408d 244 {
julientiron 1:bdbf36f8408d 245 uint32_t raw_press = 0;
julientiron 1:bdbf36f8408d 246
julientiron 1:bdbf36f8408d 247 LPS25H_I2C_ReadRawPressure(&raw_press);
julientiron 1:bdbf36f8408d 248
julientiron 1:bdbf36f8408d 249 /* return the built value */
julientiron 1:bdbf36f8408d 250 //tempInt = raw_press / 4096;
julientiron 1:bdbf36f8408d 251
julientiron 1:bdbf36f8408d 252 *pfData = (float)raw_press /4096.0f;
julientiron 1:bdbf36f8408d 253 }
julientiron 1:bdbf36f8408d 254
julientiron 1:bdbf36f8408d 255 /**
julientiron 1:bdbf36f8408d 256 * @brief Read LPS25H output register, and calculate the raw temperature.
julientiron 1:bdbf36f8408d 257 * @param int16_t *raw_data: temperature raw value.
julientiron 1:bdbf36f8408d 258 * @retval LPS25H_ERROR or LPS25H_OK.
julientiron 1:bdbf36f8408d 259 */
julientiron 1:bdbf36f8408d 260 void LPS25H_I2C_ReadRawTemperature(int16_t *raw_data)
julientiron 1:bdbf36f8408d 261 {
julientiron 1:bdbf36f8408d 262 uint8_t buffer[2];
julientiron 1:bdbf36f8408d 263 uint16_t tempVal=0;
julientiron 1:bdbf36f8408d 264
julientiron 1:bdbf36f8408d 265 /* Read the register content */
julientiron 1:bdbf36f8408d 266 PRESSURE_IO_Read(buffer, LPS25H_SlaveAddress, LPS25H_TEMP_OUT_L_ADDR+0x80, 2);
julientiron 1:bdbf36f8408d 267 // LPS25H_I2C_Read(LPS25H_TEMP_OUT_L_ADDR+0x80, 2, buffer);
julientiron 1:bdbf36f8408d 268
julientiron 1:bdbf36f8408d 269 /* Build the raw value */
julientiron 1:bdbf36f8408d 270 tempVal = (((uint16_t)buffer[1]) << 8)+(uint16_t)buffer[0];
julientiron 1:bdbf36f8408d 271
julientiron 1:bdbf36f8408d 272 /* Return it */
julientiron 1:bdbf36f8408d 273 *raw_data = ((int16_t)tempVal);
julientiron 1:bdbf36f8408d 274 }
julientiron 1:bdbf36f8408d 275
julientiron 1:bdbf36f8408d 276 /**
julientiron 1:bdbf36f8408d 277 * @brief Read LPS25H output register, and calculate the temperature.
julientiron 1:bdbf36f8408d 278 * @param float *temperature : temperature value..
julientiron 1:bdbf36f8408d 279 * @retval LPS25H_ERROR or LPS25H_OK.
julientiron 1:bdbf36f8408d 280 */
julientiron 1:bdbf36f8408d 281 void LPS25H_GetTemperature(float* pfData)
julientiron 1:bdbf36f8408d 282 {
julientiron 1:bdbf36f8408d 283 int16_t raw_data;
julientiron 1:bdbf36f8408d 284
julientiron 1:bdbf36f8408d 285 LPS25H_I2C_ReadRawTemperature(&raw_data);
julientiron 1:bdbf36f8408d 286
julientiron 1:bdbf36f8408d 287 //*data_out = (int16_t)((((float)raw_data/480.0) + 42.5)*100);
julientiron 1:bdbf36f8408d 288 *pfData = (int16_t)((((float)raw_data/480.0) + 42.5));
julientiron 1:bdbf36f8408d 289 }
julientiron 1:bdbf36f8408d 290 /**
julientiron 1:bdbf36f8408d 291 * @brief Exit the shutdown mode for LPS25H.
julientiron 1:bdbf36f8408d 292 * @param None
julientiron 1:bdbf36f8408d 293 * @retval LPS25H_ERROR or LPS25H_OK
julientiron 1:bdbf36f8408d 294 */
julientiron 1:bdbf36f8408d 295 void LPS25H_PowerOn(void)
julientiron 1:bdbf36f8408d 296 {
julientiron 1:bdbf36f8408d 297 uint8_t tmpreg;
julientiron 1:bdbf36f8408d 298
julientiron 1:bdbf36f8408d 299 /* Read the register content */
julientiron 1:bdbf36f8408d 300 // LPS25H_I2C_Read(LPS25H_CTRL_REG1_ADDR,1,&tmpReg);
julientiron 1:bdbf36f8408d 301 PRESSURE_IO_Read(&tmpreg, LPS25H_SlaveAddress, LPS25H_CTRL_REG1_ADDR, 1);
julientiron 1:bdbf36f8408d 302
julientiron 1:bdbf36f8408d 303 /* Set the power down bit */
julientiron 1:bdbf36f8408d 304 tmpreg |= LPS25H_MODE_ACTIVE;
julientiron 1:bdbf36f8408d 305
julientiron 1:bdbf36f8408d 306 /* Write register */
julientiron 1:bdbf36f8408d 307 // PRESSURE_IO_Write(LPS25H_CTRL_REG1_ADDR,1,&tmpReg);
julientiron 1:bdbf36f8408d 308 PRESSURE_IO_Write(&tmpreg, LPS25H_SlaveAddress, LPS25H_CTRL_REG1_ADDR, 1);
julientiron 1:bdbf36f8408d 309
julientiron 1:bdbf36f8408d 310 }
julientiron 1:bdbf36f8408d 311
julientiron 1:bdbf36f8408d 312
julientiron 1:bdbf36f8408d 313 /**
julientiron 1:bdbf36f8408d 314 * @brief Enter the shutdown mode for LPS25H.
julientiron 1:bdbf36f8408d 315 * @param None
julientiron 1:bdbf36f8408d 316 * @retval LPS25H_ERROR or LPS25H_OK
julientiron 1:bdbf36f8408d 317 */
julientiron 1:bdbf36f8408d 318 void LPS25H_PowerOff(void)
julientiron 1:bdbf36f8408d 319 {
julientiron 1:bdbf36f8408d 320 uint8_t tmpreg;
julientiron 1:bdbf36f8408d 321
julientiron 1:bdbf36f8408d 322 /* Read the register content */
julientiron 1:bdbf36f8408d 323 // PRESSURE_IO_Read( LPS25H_CTRL_REG1_ADDR,1,&tmpReg);
julientiron 1:bdbf36f8408d 324 PRESSURE_IO_Read(&tmpreg, LPS25H_SlaveAddress, LPS25H_CTRL_REG1_ADDR, 1);
julientiron 1:bdbf36f8408d 325
julientiron 1:bdbf36f8408d 326 /* Reset the power down bit */
julientiron 1:bdbf36f8408d 327 tmpreg &= ~(LPS25H_MODE_ACTIVE);
julientiron 1:bdbf36f8408d 328
julientiron 1:bdbf36f8408d 329 /* Write register */
julientiron 1:bdbf36f8408d 330 // PRESSURE_IO_Write( LPS25H_CTRL_REG1_ADDR,1,&tmpReg);
julientiron 1:bdbf36f8408d 331 PRESSURE_IO_Write(&tmpreg, LPS25H_SlaveAddress, LPS25H_CTRL_REG1_ADDR, 1);
julientiron 1:bdbf36f8408d 332 }
julientiron 1:bdbf36f8408d 333
julientiron 1:bdbf36f8408d 334
julientiron 1:bdbf36f8408d 335 /**
julientiron 1:bdbf36f8408d 336 * @brief Set the slave address according to SA0 bit.
julientiron 1:bdbf36f8408d 337 * @param SA0_Bit_Status: LPS25H_SA0_LOW or LPS25H_SA0_HIGH
julientiron 1:bdbf36f8408d 338 * @retval None
julientiron 1:bdbf36f8408d 339 */
julientiron 1:bdbf36f8408d 340 void LPS25H_SlaveAddrRemap(uint8_t SA0_Bit_Status)
julientiron 1:bdbf36f8408d 341 {
julientiron 1:bdbf36f8408d 342 LPS25H_SlaveAddress = (SA0_Bit_Status==LPS25H_SA0_LOW?LPS25H_ADDRESS_LOW:LPS25H_ADDRESS_HIGH);
julientiron 1:bdbf36f8408d 343 }
julientiron 1:bdbf36f8408d 344
julientiron 1:bdbf36f8408d 345 /**
julientiron 1:bdbf36f8408d 346 * @}
julientiron 1:bdbf36f8408d 347 */
julientiron 1:bdbf36f8408d 348
julientiron 1:bdbf36f8408d 349 /**
julientiron 1:bdbf36f8408d 350 * @}
julientiron 1:bdbf36f8408d 351 */
julientiron 1:bdbf36f8408d 352
julientiron 1:bdbf36f8408d 353 /**
julientiron 1:bdbf36f8408d 354 * @}
julientiron 1:bdbf36f8408d 355 */
julientiron 1:bdbf36f8408d 356
julientiron 1:bdbf36f8408d 357 /**
julientiron 1:bdbf36f8408d 358 * @}
julientiron 1:bdbf36f8408d 359 */
julientiron 1:bdbf36f8408d 360
julientiron 1:bdbf36f8408d 361
julientiron 1:bdbf36f8408d 362 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
julientiron 1:bdbf36f8408d 363