rhomb.io / Mbed OS pelion-example-rhombio-l476dmw1k

Mbed OS and Pelion Device Management example over WIFI for RHOMBIO_L476DMW1K IoT kit

DEPRECATED

This example application is not maintained and not recommended. It uses an old version of Mbed OS, Pelion DM, and Arm toolchain. It doesn't work with Mbed Studio.

Please use: https://os.mbed.com/teams/mbed-os-examples/code/mbed-os-example-pelion/

This example is known to work great on the following platforms:

RHOMBIO_L476DMW1K over WiFI and using onboard QSPI flash.

/media/uploads/galonso/rhombio_l476dmw1k_kit_assembled.png

Follow the Quick-Start instructions: https://cloud.mbed.com/quick-start

Example functionality

This example showcases the following device functionality:

  • Read onboard MCU ADC temperature and MCU ADC voltage reference, and report them as Pelion LWM2M resources (see image below).
  • On user button click, increment Pelion LWM2M button resource.
  • Allow the user to change the state of the board LED from Pelion LWM2M led_state resource and PUT request.
  • External sensors can be easily added to the kit and then sensor readings reported as Pelion LWM2M resources.

/media/uploads/galonso/temperature_-_sensor_value_-_pelion_device_management_portal.png

Use this example with Mbed CLI

1. Import the application into your desktop:

mbed import https://os.mbed.com/teams/Rhombio/code/pelion-example-rhombio-l476dmw1k

cd pelion-example-rhombio-l476dmw1k

2. Install the CLOUD_SDK_API_KEY

mbed config -G CLOUD_SDK_API_KEY <PELION_DM_API_KEY>

For instructions on how to generate your API key, please see the documentation.

3. Initialize firmware credentials (done once per repository). You can use the following command:

mbed dm init -d "<your company name in Pelion DM>" --model-name "<product model identifier>" -q --force

If above command do not work for your Mbed CLI, please consider upgrading Mbed CLI to version 1.8.x or above.

4. Compile and program:

mbed compile -t <toolchain> -m RHOMBIO_L476DMW1K -f

(supported toolchains : GCC_ARM / ARM / IAR)

5. You can connect on a virtual terminal/COM port to the platform using:

mbed sterm -b 115200

This should give you an output similar to:

[BOOT] Mbed Bootloader
[BOOT] ARM: 0000000000000000000000000000000000000000
[BOOT] OEM: 0000000000000000000000000000000000000000
[BOOT] Layout: 0 800D24C
[BOOT] Active firmware integrity check:
[BOOT] SHA256: 9036E19F1414720659B2C2FAC8855F621AF533BA211D930119720E7A2BD60BF2
[BOOT] Version: 1558516039
[BOOT] Slot 0 is empty
[BOOT] Active firmware up-to-date
[BOOT] Application's start address: 0x8010400
[BOOT] Application's jump address: 0x8010889
[BOOT] Application's stack address: 0x20018000
[BOOT] Forwarding to application...

Starting Simple Pelion Device Management Client example
You can hold the user button during boot to format the storage and change the device identity.

Connecting to the network using Wifi...
Connected to the network successfully. IP address: 192.168.1.201
Initializing Pelion Device Management Client...
Initialized Pelion Client. Registering...
Registered to Pelion Device Management. Endpoint Name: 016a***********************10006d
                                                             
ADC temp: 23.1746 C,  vref: 0.3665 V         
                                                             
ADC temp: 23.2234 C,  vref: 0.3663 V

bootloader/LICENSE

Committer:
galonso@rhomb.io
Date:
2019-05-22
Revision:
4:2aee28e71add
Parent:
0:9ff56a0e4c0d

File content as of revision 4:2aee28e71add:

Permissive Binary License

Version 1.0, September 2015

Redistribution.  Redistribution and use in binary form, without
modification, are permitted provided that the following conditions are
met:

1) Redistributions must reproduce the above copyright notice and the
   following disclaimer in the documentation and/or other materials
   provided with the distribution.

2) Unless to the extent explicitly permitted by law, no reverse
   engineering, decompilation, or disassembly of this software is
   permitted.

3) Redistribution as part of a software development kit must include the
   accompanying file named "DEPENDENCIES" and any dependencies listed in
   that file.

4) Neither the name of the copyright holder nor the names of its
   contributors may be used to endorse or promote products derived from
   this software without specific prior written permission. 

Limited patent license. The copyright holders (and contributors) grant a
worldwide, non-exclusive, no-charge, royalty-free patent license to
make, have made, use, offer to sell, sell, import, and otherwise
transfer this software, where such license applies only to those patent
claims licensable by the copyright holders (and contributors) that are
necessarily infringed by this software. This patent license shall not
apply to any combinations that include this software.  No hardware is
licensed hereunder.

If you institute patent litigation against any entity (including a
cross-claim or counterclaim in a lawsuit) alleging that the software
itself infringes your patent(s), then your rights granted under this
license shall terminate as of the date such litigation is filed.

DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS." ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.