Renesas / Mbed OS GR-PEACH_mbed-os-client-ZXingSample

This is a mbed Client sample where ZXing is incorporated, and works on GR-PEACH and GR-LYCHEE.

Dependencies:   DisplayApp AsciiFont

Overview

This sample program shows how to use mbed Client together with ZXing which is an open-source, multi-format 1D/2D barcode image processing library. For more info on ZXing, please refer to https://github.com/zxing/zxing.

Required hardware

• GR-PEACH ( https://developer.mbed.org/platforms/Renesas-GR-PEACH/ )
• Audio Camera Shield ( https://developer.mbed.org/teams/Renesas/wiki/Audio_Camera-shield )
• LCD Shield ( https://developer.mbed.org/teams/Renesas/wiki/LCD-shield )
• Ethernet cable and connection to the internet
• Wireless Camera shieled (This is GR-PEACH' Wifi(ESP32) optional.)

• GR-LYCHEE ( https://developer.mbed.org/platforms/Renesas-GR-LYCHEE/ )

Application setup

1. Select the connection type. For details, please refer to the following wiki:
   https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Connection-type.
2. Set the client credentials. For details, please refer to the following wiki:
   https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Client-credentials.
3. Change Ethernet settings. For details, please refer to the following wiki:
   https://developer.mbed.org/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Ethernet-settings.
4. Change Wifi settings. For details, please refer to the following wiki:
   https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Wifi-settings.
5. Set up an IP address. (This step is optional.) For details, please refer to the following wiki:
   https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/IP-address-setup.

Building the example

To build this example:

1. Import this example onto mbed Compiler.
2. Configure the example in accordance with Application setup.
3. Compile the example on mbed Compiler and download the resultant binary file.
4. Plug the Ethernet cable into GR-PEACH or GR-LYCHEE if you are using Ethernet mode.
5. Plug the micro-USB cable into the OpenSDA port which lies on the next to the RESET button.
6. Copy the binary previously downloaded to your PC to GR-PEACH or GR-LYCHEE to flash this example. When the copy is successfully completed, the board is ready to work.
7. Press the RESET button on the board to run the example.
8. For verification, please refer to the following wiki:
   https://developer.mbed.org/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Monitoring-the-application.

Application resources

This example exposes four resources listed below:

1. 3202/0/5700. Decode result of barcode data input from camera (GET).
2. 3201/0/5850. Blink function, blinks LED when executed (POST).
3. 3201/0/5853. Blink pattern, used by the blink function to determine how to blink. In the format of 1000:500:1000:500:1000:500 (PUT).
4. 3201/0/5855. Blink color, used by the blink function. Any of red, green, blue, cyan, yellow and magenta is acceptable if you are using GR-PEACH board (PUT).
5. 3201/0/5855. Blink color, used by the blink function. Any of green, yellow, orange and red is acceptable if you are using GR-LYCHEE board (PUT).

For more info on how to get notifications when resource 1 changes, or how to use resource 2, 3 and 4, please look at

Initial Commit