This is a mbed Client sample where ZXing is incorporated, and works on GR-PEACH and GR-LYCHEE.
Dependencies: DisplayApp AsciiFont
Overview
This sample program shows how to use mbed Client together with ZXing which is an open-source, multi-format 1D/2D barcode image processing library. For more info on ZXing, please refer to https://github.com/zxing/zxing.
Required hardware
- GR-PEACH ( https://developer.mbed.org/platforms/Renesas-GR-PEACH/ )
- Audio Camera Shield ( https://developer.mbed.org/teams/Renesas/wiki/Audio_Camera-shield )
- LCD Shield ( https://developer.mbed.org/teams/Renesas/wiki/LCD-shield )
- Ethernet cable and connection to the internet
- Wireless Camera shieled (This is GR-PEACH' Wifi(ESP32) optional.)
- GR-LYCHEE ( https://developer.mbed.org/platforms/Renesas-GR-LYCHEE/ )
Application setup
- Select the connection type. For details, please refer to the following wiki:
https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Connection-type. - Set the client credentials. For details, please refer to the following wiki:
https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Client-credentials. - Change Ethernet settings. For details, please refer to the following wiki:
https://developer.mbed.org/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Ethernet-settings. - Change Wifi settings. For details, please refer to the following wiki:
https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Wifi-settings. - Set up an IP address. (This step is optional.) For details, please refer to the following wiki:
https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/IP-address-setup.
Building the example
To build this example:
- Import this example onto mbed Compiler.
- Configure the example in accordance with Application setup.
- Compile the example on mbed Compiler and download the resultant binary file.
- Plug the Ethernet cable into GR-PEACH or GR-LYCHEE if you are using Ethernet mode.
- Plug the micro-USB cable into the OpenSDA port which lies on the next to the RESET button.
- Copy the binary previously downloaded to your PC to GR-PEACH or GR-LYCHEE to flash this example. When the copy is successfully completed, the board is ready to work.
- Press the RESET button on the board to run the example.
- For verification, please refer to the following wiki:
https://developer.mbed.org/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Monitoring-the-application.
Application resources
This example exposes four resources listed below:
- 3202/0/5700. Decode result of barcode data input from camera (GET).
- 3201/0/5850. Blink function, blinks LED when executed (POST).
- 3201/0/5853. Blink pattern, used by the blink function to determine how to blink. In the format of 1000:500:1000:500:1000:500 (PUT).
- 3201/0/5855. Blink color, used by the blink function. Any of red, green, blue, cyan, yellow and magenta is acceptable if you are using GR-PEACH board (PUT).
- 3201/0/5855. Blink color, used by the blink function. Any of green, yellow, orange and red is acceptable if you are using GR-LYCHEE board (PUT).
For more info on how to get notifications when resource 1 changes, or how to use resource 2, 3 and 4, please look at
Import programGR-PEACH_mbed-connector-ZXingSample-node
Node.js based Web Application for mbed Device Connector specific to GR-PEACH_mbed-os-client-ZXingSample
zxing_lib/zxing/ResultPoint.h@5:6b6540e303f2, 2017-04-17 (annotated)
- Committer:
- 1050186
- Date:
- Mon Apr 17 05:28:29 2017 +0000
- Revision:
- 5:6b6540e303f2
- Parent:
- 0:eb73febb2bba
Support GCC_ARM, and update libraries.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 0:eb73febb2bba | 1 | // -*- mode:c++; tab-width:2; indent-tabs-mode:nil; c-basic-offset:2 -*- |
<> | 0:eb73febb2bba | 2 | #ifndef __RESULT_POINT_H__ |
<> | 0:eb73febb2bba | 3 | #define __RESULT_POINT_H__ |
<> | 0:eb73febb2bba | 4 | |
<> | 0:eb73febb2bba | 5 | /* |
<> | 0:eb73febb2bba | 6 | * ResultPoint.h |
<> | 0:eb73febb2bba | 7 | * zxing |
<> | 0:eb73febb2bba | 8 | * |
<> | 0:eb73febb2bba | 9 | * Copyright 2010 ZXing authors All rights reserved. |
<> | 0:eb73febb2bba | 10 | * |
<> | 0:eb73febb2bba | 11 | * Licensed under the Apache License, Version 2.0 (the "License"); |
<> | 0:eb73febb2bba | 12 | * you may not use this file except in compliance with the License. |
<> | 0:eb73febb2bba | 13 | * You may obtain a copy of the License at |
<> | 0:eb73febb2bba | 14 | * |
<> | 0:eb73febb2bba | 15 | * http://www.apache.org/licenses/LICENSE-2.0 |
<> | 0:eb73febb2bba | 16 | * |
<> | 0:eb73febb2bba | 17 | * Unless required by applicable law or agreed to in writing, software |
<> | 0:eb73febb2bba | 18 | * distributed under the License is distributed on an "AS IS" BASIS, |
<> | 0:eb73febb2bba | 19 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
<> | 0:eb73febb2bba | 20 | * See the License for the specific language governing permissions and |
<> | 0:eb73febb2bba | 21 | * limitations under the License. |
<> | 0:eb73febb2bba | 22 | */ |
<> | 0:eb73febb2bba | 23 | |
<> | 0:eb73febb2bba | 24 | #include <zxing/common/Counted.h> |
<> | 0:eb73febb2bba | 25 | #include <vector> |
<> | 0:eb73febb2bba | 26 | |
<> | 0:eb73febb2bba | 27 | namespace zxing { |
<> | 0:eb73febb2bba | 28 | |
<> | 0:eb73febb2bba | 29 | class ResultPoint : public Counted { |
<> | 0:eb73febb2bba | 30 | protected: |
<> | 0:eb73febb2bba | 31 | const float posX_; |
<> | 0:eb73febb2bba | 32 | const float posY_; |
<> | 0:eb73febb2bba | 33 | |
<> | 0:eb73febb2bba | 34 | public: |
<> | 0:eb73febb2bba | 35 | ResultPoint(); |
<> | 0:eb73febb2bba | 36 | ResultPoint(float x, float y); |
<> | 0:eb73febb2bba | 37 | ResultPoint(int x, int y); |
<> | 0:eb73febb2bba | 38 | virtual ~ResultPoint(); |
<> | 0:eb73febb2bba | 39 | |
<> | 0:eb73febb2bba | 40 | virtual float getX() const; |
<> | 0:eb73febb2bba | 41 | virtual float getY() const; |
<> | 0:eb73febb2bba | 42 | |
<> | 0:eb73febb2bba | 43 | bool equals(Ref<ResultPoint> other); |
<> | 0:eb73febb2bba | 44 | |
<> | 0:eb73febb2bba | 45 | static void orderBestPatterns(std::vector<Ref<ResultPoint> > &patterns); |
<> | 0:eb73febb2bba | 46 | static float distance(Ref<ResultPoint> point1, Ref<ResultPoint> point2); |
<> | 0:eb73febb2bba | 47 | static float distance(float x1, float x2, float y1, float y2); |
<> | 0:eb73febb2bba | 48 | |
<> | 0:eb73febb2bba | 49 | private: |
<> | 0:eb73febb2bba | 50 | static float crossProductZ(Ref<ResultPoint> pointA, Ref<ResultPoint> pointB, Ref<ResultPoint> pointC); |
<> | 0:eb73febb2bba | 51 | }; |
<> | 0:eb73febb2bba | 52 | |
<> | 0:eb73febb2bba | 53 | } |
<> | 0:eb73febb2bba | 54 | |
<> | 0:eb73febb2bba | 55 | #endif // __RESULT_POINT_H__ |