RedBearLab


RedBearLab is committed to bring innovative products to a wide range of developers, from beginners to professional embedded programmers.

Team code repositories (11)

I2C with AT24Cxxx
The program demonstrates how to implement SPI on RedBearLab nRF51822 platform
I2C example for BLE Nano and RedBearLab nRF51822. It demonstrates how to use I2C to communicate with AT24C512 EEPROM device.
The example program for RedBearLab nRF51822 relative platforms
The program demonstrates how to implement SPI on BLE Nano platform
SimpleControls works with the BLEController iOS/Android App. The mbed's pin can acts as DIGITAL_IN, DIGITAL_OUT, PWM, SERVO, ANALOG_IN. The sketch is to show you how to control the pin as ...
This is a simple program to work with RedBearLab BLE Controller App. Type something from the Terminal to send to the BLEController App or vice verse. Characteristics received from App ...
SimpleControls works with the BLEController iOS/Android App. The mbed's pin can acts as DIGITAL_IN, DIGITAL_OUT, PWM, SERVO, ANALOG_IN. The sketch is to show you how to control the pin as ...
This program demonstrate how to apply BLE_nRF8001 library on mbed platform working with RedBearLab BLE Shield v2.1 or above.
This program demonstrate how to apply BLE_nRF8001 library on mbed platform working with RedBearLab BLE Shield v2.1 or above.
It is the Nordic nRF8001 BLE library for RedBearLab BLE Shield v2.1 or above. It is compatible with the platforms those soldered Arduino compatible form factor. The library is ported ...