I messed up the merge, so pushing it over to another repo so I don't lose it. Will tidy up and remove later
Dependencies: BufferedSerial FatFileSystemCpp mbed
Diff: settings.txt
- Revision:
- 25:7002be632308
- Child:
- 39:3cd9e498b5c6
diff -r 16fd010a71d0 -r 7002be632308 settings.txt --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/settings.txt Wed Jul 07 16:27:24 2021 +0000 @@ -0,0 +1,40 @@ +[Serial Output Format] +# Sets the serial output format. +# 0 = VIPS (Default) +# 1 = FreeD +-------------------------------- +Output_Format=0 +-------------------------------- + +[Fiz Format] +# Sets the FIZ reader to use +# 0 - Preston (default) +# 1 - Fuji passive listen mode (skycam) +# 2 - Fuji active mode +-------------------------------- +FIZ_Format=2 +-------------------------------- + +[Ethernet Port] +# Sets the UDP port for FreeD network output. +# Data is sent as a UDP broadcast on the select port number. +# A port number of 0 disables UDP output. +-------------------------------- +FreeD_Port=12345 +-------------------------------- + +[Network Settings] +# Set the Static IPv4 address to use for the ethernet interface. +# NOTE: All 3 values must be set for a static address to be used otherwise DHCP will be used. +# Comment out the line using any additional characters at the beginning to ignore +-------------------------------- +//IP_addr=aaa.bbb.ccc.ddd +//Subnet=aaa.bbb.ccc.ddd +//Gateway=aaa.bbb.ccc.ddd +-------------------------------- + + +[NOTES] +- All settings are case sensitive. +- Do NOT include spaces in the options lines. +- All options default to a value of 0 if omitted from the file. \ No newline at end of file