![](/media/cache/group/Racelogic_Blue_Logo.jpg.50x50_q85.jpg)
I messed up the merge, so pushing it over to another repo so I don't lose it. Will tidy up and remove later
Dependencies: BufferedSerial FatFileSystemCpp mbed
Diff: settings.txt
- Revision:
- 39:3cd9e498b5c6
- Parent:
- 25:7002be632308
- Child:
- 42:9653486372a6
- Child:
- 44:fe7fcf62c75d
--- a/settings.txt Mon Aug 09 10:37:51 2021 +0000 +++ b/settings.txt Tue Aug 10 14:48:56 2021 +0000 @@ -5,16 +5,17 @@ -------------------------------- Output_Format=0 -------------------------------- - + [Fiz Format] # Sets the FIZ reader to use # 0 - Preston (default) # 1 - Fuji passive listen mode (skycam) # 2 - Fuji active mode +# 3 - Canon -------------------------------- -FIZ_Format=2 +FIZ_Format=3 -------------------------------- - + [Ethernet Port] # Sets the UDP port for FreeD network output. # Data is sent as a UDP broadcast on the select port number. @@ -22,7 +23,7 @@ -------------------------------- FreeD_Port=12345 -------------------------------- - + [Network Settings] # Set the Static IPv4 address to use for the ethernet interface. # NOTE: All 3 values must be set for a static address to be used otherwise DHCP will be used. @@ -33,7 +34,27 @@ //Gateway=aaa.bbb.ccc.ddd -------------------------------- +[Filter_Settings] +#Low pass filter settings for channels that have it enabled. +#Filter is of order n with a cut off at m Hz assuming input data rate is at r Hz +#Filter order must be set to enable filters. +#Frequency default is 10Hz +#Rate default is 100Hz +//FilterOrder=1 +//FilterFreq=7 +//FilterRate=100 +//FilterXY=0 +//FilterZ=0 +//FilterRoll=0 +//FilterPitch=1 +//FilterYaw=0 +# Enable channels to low pass filter. All filters use the settings given above. +# A value of 1 enables the filter. A value of 0 or skipping the line disables the filter. + +# NOTE-The filter will add latency so a filtered channel will be delayed relative to an unfiltered one. + + [NOTES] - All settings are case sensitive. - Do NOT include spaces in the options lines.