OneM2M
123r
Dependencies: WNC14A2AInterface
Diff: mcr20a-rf-driver/source/MCR20Overwrites.h
- Revision:
- 0:2563b0415d1f
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mcr20a-rf-driver/source/MCR20Overwrites.h Wed Apr 19 01:13:10 2017 +0000
@@ -0,0 +1,309 @@
+/*!
+* Copyright (c) 2015, Freescale Semiconductor, Inc.
+* All rights reserved.
+*
+* \file MCR20Overwrites.h
+* Description: Overwrites header file for MCR20 Register values
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+*
+* o Redistributions of source code must retain the above copyright notice, this list
+* of conditions and the following disclaimer.
+*
+* o Redistributions in binary form must reproduce the above copyright notice, this
+* list of conditions and the following disclaimer in the documentation and/or
+* other materials provided with the distribution.
+*
+* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+* contributors may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef OVERWRITES_H_
+#define OVERWRITES_H_
+
+typedef struct overwrites_tag {
+ char address;
+ char data;
+}overwrites_t;
+
+
+/*****************************************************************************************************************/
+// This file is created exclusively for use with the transceiver 2.0 silicon
+// and is provided for the world to use. It contains a list of all
+// known overwrite values. Overwrite values are non-default register
+// values that configure the transceiver device to a more optimally performing
+// posture. It is expected that low level software (i.e. PHY) will
+// consume this file as a #include, and transfer the contents to the
+// the indicated addresses in the transceiver's memory space. This file has
+// at least one required entry, that being its own version current version
+// number, to be stored at transceiver's location 0x3B the
+// OVERWRITES_VERSION_NUMBER register. The RAM register is provided in
+// the transceiver address space to assist in future debug efforts. The
+// analyst may read this location (once device has been booted with
+// mysterious software) and have a good indication of what register
+// overwrites were performed (with all versions of the overwrites.h file
+// being archived forever at the Compass location shown above.
+//
+// The transceiver has an indirect register (IAR) space. Write access to this space
+// requires 3 or more writes:
+// 1st) the first write is an index value to the indirect (write Bit7=0, register access Bit 6=0) + 0x3E
+// 2nd) IAR Register #0x00 - 0xFF.
+// 3rd) The data to write
+// nth) Burst mode additional data if required.
+//
+// Write access to direct space requires only a single address, data pair.
+
+overwrites_t const overwrites_direct[] ={
+{0x3B, 0x0C}, //version 0C: new value for ACKDELAY targeting 198us (23 May, 2013, Larry Roshak)
+{0x23, 0x17} //PA_PWR new default Power Step is "23"
+};
+
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
+{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
+{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
+{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
+{0x52, 0x55}, //AGC_THR1 RSSI tune up
+{0x53, 0x2D}, //AGC_THR2 RSSI tune up
+{0x66, 0x5F}, //ATT_RSSI1 tune up
+{0x67, 0x8F}, //ATT_RSSI2 tune up
+{0x68, 0x61}, //RSSI_OFFSET
+{0x78, 0x03}, //CHF_PMAGAIN
+{0x22, 0x50}, //CCA1_THRESH
+{0x4D, 0x13}, //CORR_NVAL moved from 0x14 to 0x13 for 0.5 dB improved Rx Sensitivity
+{0x39, 0x3D} //ACKDELAY new value targeting a delay of 198us (23 May, 2013, Larry Roshak)
+};
+
+
+/* begin of deprecated versions
+
+==VERSION 1==
+(version 1 is empty)
+
+==VERSION 2==
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02} //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+};
+
+==VERSION 3==
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+{0x91, 0xB3}, //VCO_CTRL1: override VCOALC_REF_TX to 3
+{0x92, 0x07} //VCO_CTRL2: override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
+};
+
+==VERSION 4==
+overwrites_t const overwrites_direct[] ={
+{0x3B, 0x04} //version 04 is the current version: update PA_COILTUNING default
+};
+
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+{0x91, 0xB3}, //VCO_CTRL1: override VCOALC_REF_TX to 3
+{0x92, 0x07} //VCO_CTRL2: override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
+{0x8A, 0x71} //PA_TUNING: override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
+};
+
+==VERSION 5==
+overwrites_t const overwrites_direct[] ={
+{0x3B, 0x05} //version 05: updates Channel Filter Register set (21 Dec 2012, on behalf of S. Soca)
+};
+
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
+{0x92, 0x07} //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
+{0x8A, 0x71} //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
+{0x79, 0x2F} //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7A, 0x2F} //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7B, 0x24} //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7C, 0x24} //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7D, 0x24} //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7E, 0x24} //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x82, 0x24} //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x83, 0x24} //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7F, 0x32} //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x80, 0x1D} //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x81, 0x2D} //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+};
+
+==VERSION 6==
+overwrites_t const overwrites_direct[] ={
+{0x3B, 0x06} //version 06: disable PA calibration
+};
+
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
+{0x92, 0x07} //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
+{0x8A, 0x71} //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
+{0x79, 0x2F} //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7A, 0x2F} //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7B, 0x24} //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7C, 0x24} //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7D, 0x24} //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7E, 0x24} //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x82, 0x24} //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x83, 0x24} //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7F, 0x32} //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x80, 0x1D} //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x81, 0x2D} //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x64, 0x28} //PA_CAL_DIS=1 Disabled PA calibration
+};
+
+==VERSION 7==
+overwrites_t const overwrites_direct[] ={
+{0x3B, 0x07} //version 07: updated registers for ED/RSSI
+};
+
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
+{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
+{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
+{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
+{0x52, 0x73}, //AGC_THR1 RSSI tune up
+{0x53, 0x2D}, //AGC_THR2 RSSI tune up
+{0x66, 0x5F}, //ATT_RSSI1 tune up
+{0x67, 0x8F}, //ATT_RSSI2 tune up
+{0x68, 0x60}, //RSSI_OFFSET
+{0x69, 0x65} //RSSI_SLOPE
+};
+
+
+==VERSION 8==
+overwrites_t const overwrites_direct[] ={
+{0x3B, 0x08} //version 08: updated registers for ED/RSSI
+};
+
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
+{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
+{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
+{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
+{0x52, 0x73}, //AGC_THR1 RSSI tune up
+{0x53, 0x2D}, //AGC_THR2 RSSI tune up
+{0x66, 0x5F}, //ATT_RSSI1 tune up
+{0x67, 0x8F}, //ATT_RSSI2 tune up
+{0x69, 0x65} //RSSI_SLOPE
+{0x68, 0x61}, //RSSI_OFFSET
+{0x78, 0x03} //CHF_PMAGAIN
+};
+
+
+==VERSION 9==
+overwrites_t const overwrites_direct[] ={
+{0x3B, 0x09} //version 09: updated registers for ED/RSSI and PowerStep
+{0x23, 0x17} //PA_PWR new default value
+};
+
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
+{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
+{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
+{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
+{0x52, 0x55}, //AGC_THR1 RSSI tune up
+{0x53, 0x2D}, //AGC_THR2 RSSI tune up
+{0x66, 0x5F}, //ATT_RSSI1 tune up
+{0x67, 0x8F}, //ATT_RSSI2 tune up
+{0x68, 0x61}, //RSSI_OFFSET
+{0x78, 0x03} //CHF_PMAGAIN
+};
+
+==VERSION A==
+overwrites_t const overwrites_direct[] ={
+{0x3B, 0x0A} //version 0A: updated registers for CCA
+{0x23, 0x17} //PA_PWR new default Power Step is "23"
+};
+
+overwrites_t const overwrites_indirect[] ={
+{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
+{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
+{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
+{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
+{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
+{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
+{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
+{0x52, 0x55}, //AGC_THR1 RSSI tune up
+{0x53, 0x2D}, //AGC_THR2 RSSI tune up
+{0x66, 0x5F}, //ATT_RSSI1 tune up
+{0x67, 0x8F}, //ATT_RSSI2 tune up
+{0x68, 0x61}, //RSSI_OFFSET
+{0x78, 0x03} //CHF_PMAGAIN
+{0x22, 0x50} //CCA1_THRESH
+};
+
+end of deprecated versions */
+
+
+#endif //OVERWRITES_H_
+