OneM2M / easy-connect111

123r

Dependencies:   WNC14A2AInterface

stm-spirit1-rf-driver/source/libs/Contiki_STM32_Library/stm32l-spirit1-config.h@0:2563b0415d1f, 2017-04-19 (annotated)

Committer:
JMF
Date:
Wed Apr 19 01:13:10 2017 +0000
Revision:
0:2563b0415d1f
Initial commit

Who changed what in which revision?

UserRevisionLine numberNew contents of line
JMF 0:2563b0415d1f 1 /**
JMF 0:2563b0415d1f 2 ******************************************************************************
JMF 0:2563b0415d1f 3 * @file stm32l-spirit1-config.h
JMF 0:2563b0415d1f 4 * @author MCD Application Team
JMF 0:2563b0415d1f 5 * @version V3.4.0
JMF 0:2563b0415d1f 6 * @date 29-June-2012
JMF 0:2563b0415d1f 7 * @brief Evaluation board specific configuration file.
JMF 0:2563b0415d1f 8 ******************************************************************************
JMF 0:2563b0415d1f 9 * @attention
JMF 0:2563b0415d1f 10 *
JMF 0:2563b0415d1f 11 * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
JMF 0:2563b0415d1f 12 *
JMF 0:2563b0415d1f 13 * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
JMF 0:2563b0415d1f 14 * You may not use this file except in compliance with the License.
JMF 0:2563b0415d1f 15 * You may obtain a copy of the License at:
JMF 0:2563b0415d1f 16 *
JMF 0:2563b0415d1f 17 * http://www.st.com/software_license_agreement_liberty_v2
JMF 0:2563b0415d1f 18 *
JMF 0:2563b0415d1f 19 * Unless required by applicable law or agreed to in writing, software
JMF 0:2563b0415d1f 20 * distributed under the License is distributed on an "AS IS" BASIS,
JMF 0:2563b0415d1f 21 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
JMF 0:2563b0415d1f 22 * See the License for the specific language governing permissions and
JMF 0:2563b0415d1f 23 * limitations under the License.
JMF 0:2563b0415d1f 24 *
JMF 0:2563b0415d1f 25 ******************************************************************************
JMF 0:2563b0415d1f 26 */
JMF 0:2563b0415d1f 27
JMF 0:2563b0415d1f 28 /* Define to prevent recursive inclusion -------------------------------------*/
JMF 0:2563b0415d1f 29 #ifndef __STM32L_SPIRIT1_CONFIG_H
JMF 0:2563b0415d1f 30 #define __STM32L_SPIRIT1_CONFIG_H
JMF 0:2563b0415d1f 31
JMF 0:2563b0415d1f 32 /* Includes ------------------------------------------------------------------*/
JMF 0:2563b0415d1f 33
JMF 0:2563b0415d1f 34 /* Exported types ------------------------------------------------------------*/
JMF 0:2563b0415d1f 35 /* Exported constants --------------------------------------------------------*/
JMF 0:2563b0415d1f 36
JMF 0:2563b0415d1f 37 /* Define the STM32F10x hardware depending on the used evaluation board */
JMF 0:2563b0415d1f 38 #ifdef USE_STM3210B_EVAL
JMF 0:2563b0415d1f 39 #define USB_DISCONNECT GPIOD
JMF 0:2563b0415d1f 40 #define USB_DISCONNECT_PIN GPIO_PIN_9
JMF 0:2563b0415d1f 41 #define RCC_APB2Periph_GPIO_DISCONNECT RCC_APB2Periph_GPIOD
JMF 0:2563b0415d1f 42 #define EVAL_COM1_IRQHandler USART1_IRQHandler
JMF 0:2563b0415d1f 43
JMF 0:2563b0415d1f 44 #elif defined (USE_STM3210E_EVAL)
JMF 0:2563b0415d1f 45 #define USB_DISCONNECT GPIOB
JMF 0:2563b0415d1f 46 #define USB_DISCONNECT_PIN GPIO_PIN_14
JMF 0:2563b0415d1f 47 #define RCC_APB2Periph_GPIO_DISCONNECT RCC_APB2Periph_GPIOB
JMF 0:2563b0415d1f 48 #define EVAL_COM1_IRQHandler USART1_IRQHandler
JMF 0:2563b0415d1f 49
JMF 0:2563b0415d1f 50 #elif defined (USE_STM3210C_EVAL)
JMF 0:2563b0415d1f 51 #define USB_DISCONNECT 0
JMF 0:2563b0415d1f 52 #define USB_DISCONNECT_PIN 0
JMF 0:2563b0415d1f 53 #define RCC_APB2Periph_GPIO_DISCONNECT 0
JMF 0:2563b0415d1f 54 #define EVAL_COM1_IRQHandler USART2_IRQHandler
JMF 0:2563b0415d1f 55
JMF 0:2563b0415d1f 56 #elif defined (USE_STM32L152_EVAL) || defined (USE_STM32L152D_EVAL)
JMF 0:2563b0415d1f 57 /*
JMF 0:2563b0415d1f 58 For STM32L15xx devices it is possible to use the internal USB pullup
JMF 0:2563b0415d1f 59 controlled by register SYSCFG_PMC (refer to RM0038 reference manual for
JMF 0:2563b0415d1f 60 more details).
JMF 0:2563b0415d1f 61 It is also possible to use external pullup (and disable the internal pullup)
JMF 0:2563b0415d1f 62 by setting the define USB_USE_EXTERNAL_PULLUP in file platform_config.h
JMF 0:2563b0415d1f 63 and configuring the right pin to be used for the external pull up configuration.
JMF 0:2563b0415d1f 64 To have more details on how to use an external pull up, please refer to
JMF 0:2563b0415d1f 65 STM3210E-EVAL evaluation board manuals.
JMF 0:2563b0415d1f 66 */
JMF 0:2563b0415d1f 67 /* Uncomment the following define to use an external pull up instead of the
JMF 0:2563b0415d1f 68 integrated STM32L15xx internal pull up. In this case make sure to set up
JMF 0:2563b0415d1f 69 correctly the external required hardware and the GPIO defines below.*/
JMF 0:2563b0415d1f 70 /* #define USB_USE_EXTERNAL_PULLUP */
JMF 0:2563b0415d1f 71
JMF 0:2563b0415d1f 72 #if !defined(USB_USE_EXTERNAL_PULLUP)
JMF 0:2563b0415d1f 73 #define STM32L15_USB_CONNECT SYSCFG_USBPuCmd(ENABLE)
JMF 0:2563b0415d1f 74 #define STM32L15_USB_DISCONNECT SYSCFG_USBPuCmd(DISABLE)
JMF 0:2563b0415d1f 75
JMF 0:2563b0415d1f 76 #elif defined(USB_USE_EXTERNAL_PULLUP)
JMF 0:2563b0415d1f 77 /* PA0 is chosen just as illustrating example, you should modify the defines
JMF 0:2563b0415d1f 78 below according to your hardware configuration. */
JMF 0:2563b0415d1f 79 #define USB_DISCONNECT GPIOA
JMF 0:2563b0415d1f 80 #define USB_DISCONNECT_PIN GPIO_PIN_0
JMF 0:2563b0415d1f 81 #define RCC_AHBPeriph_GPIO_DISCONNECT RCC_AHBPeriph_GPIOA
JMF 0:2563b0415d1f 82 #define STM32L15_USB_CONNECT GPIO_ResetBits(USB_DISCONNECT, USB_DISCONNECT_PIN)
JMF 0:2563b0415d1f 83 #define STM32L15_USB_DISCONNECT GPIO_SetBits(USB_DISCONNECT, USB_DISCONNECT_PIN)
JMF 0:2563b0415d1f 84 #endif /* USB_USE_EXTERNAL_PULLUP */
JMF 0:2563b0415d1f 85
JMF 0:2563b0415d1f 86 #ifdef USE_STM32L152_EVAL
JMF 0:2563b0415d1f 87 #define EVAL_COM1_IRQHandler USART2_IRQHandler
JMF 0:2563b0415d1f 88 #elif defined (USE_STM32L152D_EVAL)
JMF 0:2563b0415d1f 89 #define EVAL_COM1_IRQHandler USART1_IRQHandler
JMF 0:2563b0415d1f 90 #endif /*USE_STM32L152_EVAL*/
JMF 0:2563b0415d1f 91
JMF 0:2563b0415d1f 92 #endif /* USE_STM3210B_EVAL */
JMF 0:2563b0415d1f 93
JMF 0:2563b0415d1f 94 /* Exported macro ------------------------------------------------------------*/
JMF 0:2563b0415d1f 95 /* Exported functions ------------------------------------------------------- */
JMF 0:2563b0415d1f 96
JMF 0:2563b0415d1f 97 #endif /* __STM32L_SPIRIT1_CONFIG_H */
JMF 0:2563b0415d1f 98 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/