Diff: TARGET_MCU_NRF51822/sdk/source/softdevice/s130/headers/ble_hci.h

Revision:

638:c90ae1400bf2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MCU_NRF51822/sdk/source/softdevice/s130/headers/ble_hci.h	Wed Sep 14 14:39:43 2016 +0100
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this
+ *   list of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
+ *   contributors to this software may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/**
+  @addtogroup BLE_COMMON 
+  @{
+*/
+
+
+#ifndef BLE_HCI_H__
+#define BLE_HCI_H__ 
+
+/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes
+ * @{ */
+
+#define BLE_HCI_STATUS_CODE_SUCCESS                        0x00   /**< Success. */
+#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND           0x01   /**< Unknown BLE Command. */
+#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER  0x02   /**< Unknown Connection Identifier. */
+/*0x03 Hardware Failure
+0x04 Page Timeout
+*/
+#define BLE_HCI_AUTHENTICATION_FAILURE                     0x05   /**< Authentication Failure. */
+#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING             0x06   /**< Pin or Key missing. */
+#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED                   0x07   /**< Memory Capacity Exceeded. */
+#define BLE_HCI_CONNECTION_TIMEOUT                         0x08   /**< Connection Timeout. */
+/*0x09 Connection Limit Exceeded
+0x0A Synchronous Connection Limit To A Device Exceeded
+0x0B ACL Connection Already Exists*/
+#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED             0x0C   /**< Command Disallowed. */
+/*0x0D Connection Rejected due to Limited Resources
+0x0E Connection Rejected Due To Security Reasons
+0x0F Connection Rejected due to Unacceptable BD_ADDR
+0x10 Connection Accept Timeout Exceeded
+0x11 Unsupported Feature or Parameter Value*/
+#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12  /**< Invalid BLE Command Parameters. */
+#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION           0x13  /**< Remote User Terminated Connection. */
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14  /**< Remote Device Terminated Connection due to low resources.*/
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF     0x15  /**< Remote Device Terminated Connection due to power off. */
+#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION            0x16  /**< Local Host Terminated Connection. */
+/*
+0x17 Repeated Attempts
+0x18 Pairing Not Allowed
+0x19 Unknown LMP PDU
+*/
+#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A                   /**< Unsupported Remote Feature. */
+/*
+0x1B SCO Offset Rejected
+0x1C SCO Interval Rejected
+0x1D SCO Air Mode Rejected*/
+#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS     0x1E       /**< Invalid LMP Parameters. */
+#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR          0x1F       /**< Unspecified Error. */
+/*0x20 Unsupported LMP Parameter Value
+0x21 Role Change Not Allowed
+*/
+#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT       0x22       /**< LMP Response Timeout. */
+/*0x23 LMP Error Transaction Collision*/
+#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED        0x24       /**< LMP PDU Not Allowed. */
+/*0x25 Encryption Mode Not Acceptable
+0x26 Link Key Can Not be Changed
+0x27 Requested QoS Not Supported
+*/
+#define BLE_HCI_INSTANT_PASSED                         0x28       /**< Instant Passed. */
+#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED      0x29       /**< Pairing with Unit Key Unsupported. */
+#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION        0x2A       /**< Different Transaction Collision. */
+/*
+0x2B Reserved
+0x2C QoS Unacceptable Parameter
+0x2D QoS Rejected
+0x2E Channel Classification Not Supported
+0x2F Insufficient Security
+0x30 Parameter Out Of Mandatory Range
+0x31 Reserved
+0x32 Role Switch Pending
+0x33 Reserved
+0x34 Reserved Slot Violation
+0x35 Role Switch Failed
+0x36 Extended Inquiry Response Too Large
+0x37 Secure Simple Pairing Not Supported By Host.
+0x38 Host Busy - Pairing
+0x39 Connection Rejected due to No Suitable Channel Found*/
+#define BLE_HCI_CONTROLLER_BUSY                        0x3A       /**< Controller Busy. */
+#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE             0x3B       /**< Connection Interval Unacceptable. */
+#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT            0x3C       /**< Directed Adverisement Timeout. */
+#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE     0x3D       /**< Connection Terminated due to MIC Failure. */
+#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED          0x3E       /**< Connection Failed to be Established. */
+
+/** @} */
+
+
+#endif // BLE_HCI_H__
+
+/** @} */