NimbeLink / Mbed 2 deprecated Skywire_Demo

Demo using a Nimbelink Skywire cellular modem paired with ST Nucleo. This demo reads several sensors and reports them to a Freeboard dashboard using dweet.io from Buglabs

Dependencies:   LIS3DH LM75B LPS331 hts221 mbed

Fork of Skywire_Demo by NimbeLink

Getting Started Guide

• Set the JP5 jumper to E5V on the Nucleo
• Place the Skywire Shield onto the Nucleo as pictured
• Place the Skywire modem onto the Shield as picture and attach the antenna U.FL coax cable as pictured
• Plug the 12V wall supply into the Skywire Shield

• Go to https://freeboard.io/ and create a user account
• Once you are logged into your Freeboard account, go to https://freeboard.io/board/PJI272 and clone the dashboard by clicking the CLONE link in the lower right corner
  • Old Revision of dashboard is here https://freeboard.io/board/jqlneI

• The new dashboard will show up on you account list under My Freeboards, you can then edit the name to whatever you like

• Under the Datasources tab on the dashboard, click the skywire link

• Change the THING NAME field to a unique string, we recommended using the MEID or IMEI on the Skywire Modem, but it could be anything you want.

• Next, Import the Skywire_Demo program into the online compiler
• Open main.cpp. Starting at Line 58, there is a list of Skywire Modems. Uncomment the Skywire Modem that you are using. Make sure only one Skywire Modem is uncommented:

/*
 * DEFINE THE SKYWIRE MODEM
 * Uncomment only the modem that you are using.
 * Make sure only one modem is uncommented!
 */
//#define NL_SW_1xRTT_V         // Verizon 2G Modem - CE910-DUAL
//#define NL_SW_1xRTT_S         // Sprint 2G Modem - CE910-DUAL
//#define NL_SW_1xRTT_A         // Aeris 2G Modem - CE910-DUAL
//#define NL_SW_GPRS            // AT&T/T-Mobile 2G Modem
//#define NL_SW_EVDO_V          // Verizon 3G Modem
//#define NL_SW_EVDO_A          // Aeris 3G Modem
//#define NL_SW_HSPAP           // AT&T/T-Mobile 3G Modem
//#define NL_SW_HSPAPG          // AT&T/T-Mobile 3G Modem w/ GPS
//#define NL_SW_HSPAPE          // GSM 3G Modem, EU
//#define NL_SW_LTE_TSVG        // Verizon 4G LTE Modem
//#define NL_SW_LTE_TNAG        // AT&T/T-Mobile 4G LTE Modem
//#define NL_SW_LTE_TEUG        // GSM 4G LTE Modem, EU
//#define NL_SW_LTE_GELS3       // VZW LTE Cat 1 Modem

• Next, to Line 73 in main.cpp, and change the DeviceID to the THING NAME you entered into your Freeboard:

/* --CHANGE THIS FOR YOUR SETUP" -- */
#define DeviceID "DweetIODeviceName"  //Freeboard DweetIO unique ID

• If applicable, go to Line 77 in main.cpp and change the APN to your specific APN:

/* --CHANGE THIS FOR YORU SETUP (IF APPLICABLE)-- */
#if defined NL_SW_HSPAP || defined NL_SW_HSPAPG || defined NL_SW_HSPAPE || defined NL_SW_LTE_TSVG || defined NL_SW_LTE_TNAG || defined NL_SW_LTE_TEUG || defined NL_SW_LTE_GELS3
    std::string APN = "yourAPNhere";
#endif

• Compile and upload to the Nucleo, cycle power to the shield and the sensor data should start to upload to your new Freeboard.

--- a/LPS331.lib	Mon Jan 05 22:46:18 2015 +0000
+++ b/LPS331.lib	Mon Jan 05 23:01:48 2015 +0000
@@ -1,1 +1,1 @@
-http://developer.mbed.org/users/yasuyuki/code/LPS331/#283e88a1bed7
+http://developer.mbed.org/users/kholland/code/LPS331/#283e88a1bed7