NXP
The MCR20A Wireless UART application functions as an wireless UART bridge between two (one-to-one) or several (one to many) boards. The application can be used with both a TERM, or with software that is capable of opening a serial port and writing to or reading from it. The characters sent or received are not necessarily ASCII printable characters.
Dependencies: fsl_phy_mcr20a fsl_smac mbed-rtos mbed
Fork of
mcr20_wireless_uart
by 
Freescale
By default, the application uses broadcast addresses for OTA communication. This way, the application can be directly downloaded and run without any user intervention. The following use case assumes no changes have been done to the project.
- Two (or more) MCR20A platforms (plugged into the FRDM-K64F Freescale Freedom Development platform) have to be connected to the PC using the mini/micro-USB cables.
- The code must be downloaded on the platforms via CMSIS-DAP (or other means).
- After that, two or more TERM applications must be opened, and the serial ports must be configured with the same baud rate as the one in the project (default baud rate is 115200). Other necessary serial configurations are 8 bit, no parity, and 1 stop bit.
- To start the setup, each platform must be reset, and one of the (user) push buttons found on the MCR20A platform must be pressed. The user can press any of the non-reset buttons on the FRDM-K64F Freescale Freedom Development platform as well. *This initiates the state machine of the application so user can start.
Documentation
SMAC Demo Applications User Guide
Diff: mcr20_helloworld.ewt
- Revision:
- 18:b02fc0e53df8
- Parent:
- 17:52cfd7db8da3
- Child:
- 19:71b793021c78
--- a/mcr20_helloworld.ewt Wed Mar 18 18:52:47 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,796 +0,0 @@ -<?xml version="1.0" encoding="iso-8859-1"?> - -<project> - <fileVersion>2</fileVersion> - <configuration> - <name>Debug</name> - <toolchain> - <name>ARM</name> - </toolchain> - <debug>1</debug> - <settings> - <name>RuntimeChecking</name> - <archiveVersion>0</archiveVersion> - <data> - <version>2</version> - <wantNonLocal>1</wantNonLocal> - <debug>1</debug> - <option> - <name>GenRtcDebugHeap</name> - <state>0</state> - </option> - <option> - <name>GenRtcEnableBoundsChecking</name> - <state>0</state> - </option> - <option> - <name>GenRtcCheckPtrsNonInstrMem</name> - <state>1</state> - </option> - <option> - <name>GenRtcTrackPointerBounds</name> - <state>1</state> - </option> - <option> - <name>GenRtcCheckAccesses</name> - <state>1</state> - </option> - <option> - <name>GenRtcGenerateEntries</name> - <state>0</state> - </option> - <option> - <name>GenRtcNrTrackedPointers</name> - <state>1000</state> - </option> - <option> - <name>GenRtcIntOverflow</name> - <state>0</state> - </option> - <option> - <name>GenRtcIncUnsigned</name> - <state>0</state> - </option> - <option> - <name>GenRtcIntConversion</name> - <state>0</state> - </option> - <option> - <name>GenRtcInclExplicit</name> - <state>0</state> - </option> - <option> - <name>GenRtcIntShiftOverflow</name> - <state>0</state> - </option> - <option> - <name>GenRtcInclUnsignedShiftOverflow</name> - <state>0</state> - </option> - <option> - <name>GenRtcUnhandledCase</name> - <state>0</state> - </option> - <option> - <name>GenRtcDivByZero</name> - <state>0</state> - </option> - <option> - <name>GenRtcEnable</name> - <state>0</state> - </option> - <option> - <name>GenRtcCheckPtrsNonInstrFunc</name> - <state>1</state> - </option> - </data> - </settings> - </configuration> - <group> - <name>FXOS8700Q_TapDetector</name> - <file> - <name>$PROJ_DIR$\FXOS8700Q_TapDetector\FXOS8700Q_TD.cpp</name> - </file> - <file> - <name>$PROJ_DIR$\FXOS8700Q_TapDetector\FXOS8700Q_TD.h</name> - </file> - </group> - <group> - <name>mBed</name> - <file> - <name>$PROJ_DIR$\mbed\AnalogIn.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\analogin_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\AnalogOut.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\analogout_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\BusIn.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\BusInOut.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\BusOut.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\CallChain.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\CAN.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\can_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\can_helper.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\cmsis.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\cmsis_nvic.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_ca9.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_ca_mmu.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_caFunc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_caInstr.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_cm0.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_cm0plus.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_cm3.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_cm4.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_cm4_simd.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_cmFunc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\core_cmInstr.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\TARGET_FRDM\device.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\DigitalIn.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\DigitalInOut.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\DigitalOut.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\DirHandle.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\Ethernet.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\ethernet_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\FileBase.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\FileHandle.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\FileLike.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\FilePath.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\FileSystemLike.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\MK64F12\fsl_bitaccess.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\MK64F12\fsl_clock_K64F12.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\fsl_device_registers.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_KPSDK_CODE\utilities\fsl_misc_utilities.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_KPSDK_CODE\utilities\fsl_os_abstraction.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_KPSDK_CODE\utilities\fsl_os_abstraction_mbed.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\MK64F12\fsl_sim_hal_K64F12.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\FunctionPointer.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\gpio_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\gpio_irq_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\gpio_object.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\I2C.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\i2c_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\I2CSlave.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\InterruptIn.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\InterruptManager.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\LocalFileSystem.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TOOLCHAIN_IAR\mbed.a</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\mbed.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\mbed_assert.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\mbed_debug.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\mbed_error.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\mbed_interface.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\MK64F12.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_adc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_aips.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_axbs.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_can.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_cau.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_cmp.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_cmt.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_crc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_dac.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_dma.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_dmamux.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_enet.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_ewm.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_fb.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_fmc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_ftfe.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_ftm.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_gpio.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_i2c.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_i2s.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_llwu.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_lptmr.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_mcg.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_mcm.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_mpu.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_nv.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_osc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_pdb.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_pit.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_pmc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_port.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_rcm.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_rfsys.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_rfvbat.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_rng.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_rtc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_sdhc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_sim.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_smc.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_spi.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_uart.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_usb.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_usbdcd.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_vref.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\device\device\MK64F12\MK64F12_wdog.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\objects.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\TARGET_FRDM\PeripheralNames.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\PeripheralPins.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\pinmap.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_MCU_K64F\TARGET_FRDM\PinNames.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\platform.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\port_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\PortIn.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\PortInOut.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\PortNames.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\PortOut.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\PwmOut.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\pwmout_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\RawSerial.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\rtc_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\rtc_time.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\semihost_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\Serial.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\serial_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\SerialBase.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\sleep_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\SPI.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\spi_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\SPISlave.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\Stream.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\TARGET_Freescale\TARGET_KPSDK_MCUS\TARGET_KPSDK_CODE\utilities\sw_timer.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F\system_MK64F12.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TARGET_K64F</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\Ticker.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\Timeout.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\Timer.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\TimerEvent.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\toolchain.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\us_ticker_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\mbed\wait_api.h</name> - </file> - </group> - <group> - <name>NanoStack_HAL</name> - <file> - <name>$PROJ_DIR$\NanoStack_HAL\arm_aes.c</name> - </file> - <file> - <name>$PROJ_DIR$\NanoStack_HAL\arm_events.c</name> - </file> - <file> - <name>$PROJ_DIR$\NanoStack_HAL\arm_port.h</name> - </file> - <file> - <name>$PROJ_DIR$\NanoStack_HAL\arm_rng.c</name> - </file> - <file> - <name>$PROJ_DIR$\NanoStack_HAL\arm_timer.cpp</name> - </file> - </group> - <group> - <name>NanoStack_LIB</name> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\hal\arm_hal_aes.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\hal\arm_hal_interrupt.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\hal\arm_hal_phy.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\hal\arm_hal_random.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\hal\arm_hal_timer.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\br_ipv6_lib.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\br_lib.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\br_list_nvm_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\br_mle_lib.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\br_pana_server.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\ccm\ccmLIB.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\src\hal\common\common_functions.c</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\hal\common\common_functions.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\multicast_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\bin\nanostack_cortex_m4_library.a</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\net_interface.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\net_nwk_scan.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\net_rpl.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\ns_address.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\dynmem\nsdynmemLIB.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\nwk_stats_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\net\pana_nvm_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\hal\pl_types.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\randlib\randLIB.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\socket\socket_api.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\socket\socket_security.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\event_os\system_event.h</name> - </file> - <file> - <name>$PROJ_DIR$\Nanostack_lib\inc\event_os\tasklet_api.h</name> - </file> - </group> - <group> - <name>NSDL</name> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_dbg.h</name> - </file> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_lib\nsdl_lib.a</name> - </file> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_run.cpp</name> - </file> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_support.cpp</name> - </file> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_support.h</name> - </file> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_utils.cpp</name> - </file> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_lib\sn_coap_header.h</name> - </file> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_lib\sn_coap_protocol.h</name> - </file> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_lib\sn_nsdl.h</name> - </file> - <file> - <name>$PROJ_DIR$\NSDL\nsdl_lib\sn_nsdl_lib.h</name> - </file> - </group> - <group> - <name>Resources</name> - <file> - <name>$PROJ_DIR$\Resources\battery.cpp</name> - </file> - <file> - <name>$PROJ_DIR$\Resources\battery.h</name> - </file> - <file> - <name>$PROJ_DIR$\Resources\rgb.cpp</name> - </file> - <file> - <name>$PROJ_DIR$\Resources\rgb.h</name> - </file> - </group> - <group> - <name>RF Drivers ATMEL</name> - <file> - <name>$PROJ_DIR$\RF_Drivers_Atmel\driverAtmelRFInterface.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Atmel\driverAtmelRFInterface.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Atmel\driverDebug.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Atmel\driverDebug.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Atmel\driverRFPhy.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Atmel\driverRFPhy.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Atmel\low_level_RF.cpp</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Atmel\low_level_RF.h</name> - </file> - </group> - <group> - <name>RF Drivers FSL</name> - <group> - <name>MCR20Drv</name> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\MCR20Drv\MCR20Drv.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\MCR20Drv\MCR20Drv.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\MCR20Drv\MCR20Overwrites.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\MCR20Drv\MCR20Reg.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\MCR20Drv\XcvrSpi.cpp</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\MCR20Drv\XcvrSpi.h</name> - </file> - </group> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\ASP.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\AspInterface.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\driverRFinterface.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\driverRFinterface.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\EmbeddedTypes.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\MPM.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\MpmInterface.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\Phy.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyConfig.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyDebug.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyDebug.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyInterface.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyISR.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyMessages.h</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyPacketProcessor.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyPlmeData.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyStateMachine.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyTime.c</name> - </file> - <file> - <name>$PROJ_DIR$\RF_Drivers_Freescale\PhyTypes.h</name> - </file> - </group> - <file> - <name>$PROJ_DIR$\main.cpp</name> - </file> - <file> - <name>$PROJ_DIR$\node_cfg.h</name> - </file> - <file> - <name>$PROJ_DIR$\options.h</name> - </file> -</project> - -