NXP
The MCR20A Wireless UART application functions as an wireless UART bridge between two (one-to-one) or several (one to many) boards. The application can be used with both a TERM, or with software that is capable of opening a serial port and writing to or reading from it. The characters sent or received are not necessarily ASCII printable characters.
Dependencies: fsl_phy_mcr20a fsl_smac mbed-rtos mbed
Fork of
mcr20_wireless_uart
by 
Freescale
By default, the application uses broadcast addresses for OTA communication. This way, the application can be directly downloaded and run without any user intervention. The following use case assumes no changes have been done to the project.
- Two (or more) MCR20A platforms (plugged into the FRDM-K64F Freescale Freedom Development platform) have to be connected to the PC using the mini/micro-USB cables.
- The code must be downloaded on the platforms via CMSIS-DAP (or other means).
- After that, two or more TERM applications must be opened, and the serial ports must be configured with the same baud rate as the one in the project (default baud rate is 115200). Other necessary serial configurations are 8 bit, no parity, and 1 stop bit.
- To start the setup, each platform must be reset, and one of the (user) push buttons found on the MCR20A platform must be pressed. The user can press any of the non-reset buttons on the FRDM-K64F Freescale Freedom Development platform as well. *This initiates the state machine of the application so user can start.
Documentation
SMAC Demo Applications User Guide
Diff: RF_Drivers_Freescale/Phy.h
- Revision:
- 18:b02fc0e53df8
- Parent:
- 17:52cfd7db8da3
- Child:
- 19:71b793021c78
--- a/RF_Drivers_Freescale/Phy.h Wed Mar 18 18:52:47 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1110 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file Phy.h
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef __PHY_H__
-#define __PHY_H__
-
-
-/*****************************************************************************
- * INCLUDED HEADERS *
- *---------------------------------------------------------------------------*
- * Add to this section all the headers that this module needs to include. *
- * Note that it is not a good practice to include header files into header *
- * files, so use this section only if there is no other better solution. *
- *---------------------------------------------------------------------------*
- *****************************************************************************/
-
-#include "EmbeddedTypes.h"
-#include "PhyInterface.h"
-//#include "fsl_os_abstraction.h"
-
-/*****************************************************************************
- * PUBLIC MACROS, DEFINITIONS *
- *---------------------------------------------------------------------------*
- * Add to this section all the access macros, registers mappings, bit access *
- * macros, masks, flags etc ...
- *---------------------------------------------------------------------------*
- *****************************************************************************/
-
- #ifdef __cplusplus
- extern "C" {
-#endif
-
-#ifdef _DEBUG
-#ifdef gPHY_802_15_4g_d
-#define MAC_PHY_DEBUG
-#endif
-#endif
-
-#ifndef gSnifferCRCEnabled_d
-#define gSnifferCRCEnabled_d (0)
-#endif
-
-#ifndef gUseStandaloneCCABeforeTx_d
-#define gUseStandaloneCCABeforeTx_d (1)
-#endif
-
-#ifndef gUsePBTransferThereshold_d
-#define gUsePBTransferThereshold_d (0)
-#endif
-
-#ifndef gPhyRxRetryInterval_c
-#define gPhyRxRetryInterval_c (100) /* [symbols] */
-#endif
-
-// PHY states
-enum {
- gIdle_c,
- gRX_c,
- gTX_c,
- gCCA_c,
- gTR_c,
- gCCCA_c,
-#ifdef gPHY_802_15_4g_d
- gED_c
-#endif // gPHY_802_15_4g_d
-};
-
-// PHY channel state
-enum {
- gChannelIdle_c,
- gChannelBusy_c
-};
-
-// PANCORDNTR bit in PP
-enum {
- gMacRole_DeviceOrCoord_c,
- gMacRole_PanCoord_c
-};
-
-// Cca types
-enum {
- gCcaED_c, // energy detect - CCA bit not active, not to be used for T and CCCA sequences
- gCcaCCA_MODE1_c, // energy detect - CCA bit ACTIVE
- gCcaCCA_MODE2_c, // 802.15.4 compliant signal detect - CCA bit ACTIVE
- gCcaCCA_MODE3_c, //
- gInvalidCcaType_c // illegal type
-};
-
-enum {
- gNormalCca_c,
- gContinuousCca_c
-};
-
-
-/*****************************************************************************
-* Public type definitions *
-*****************************************************************************/
-typedef struct Phy_PhyLocalStruct_tag
-{
- PD_MAC_SapHandler_t PD_MAC_SapHandler;
- PLME_MAC_SapHandler_t PLME_MAC_SapHandler;
-// event_t phyTaskEventId;
-// msgQueue_t macPhyInputQueue;
- phyMessageHeader_t * pMsgIn;
- uint32_t maxFrameWaitTime;
- volatile phyTxParams_t txParams;
- union{
- volatile phyRxParams_t rxParams;
- volatile phyChannelParams_t channelParams;
- };
-#ifdef gPHY_802_15_4g_d
- volatile phyFlags_t flags;
- phyTime_t startTime;
- uint16_t phyUnavailableQueuePos;
- uint16_t phyIndirectQueue[gPhyIndirectQueueSize_c];
- uint16_t fcs;
- uint8_t macPanID[2];
- uint8_t macShortAddress[2];
- uint8_t macLongAddress[8];
-#else
- volatile uint8_t flags;
-#endif // gPHY_802_15_4g_d
- uint8_t currentMacInstance;
-}Phy_PhyLocalStruct_t;
-
-
-/*****************************************************************************
-* Public macros *
-*****************************************************************************/
-
-#define PhyGetSeqState() PhyPpGetState()
-#define PhyPlmeForceTrxOffRequest() PhyAbort()
-
-
-/*****************************************************************************
-* Public prototypes *
-*****************************************************************************/
-
-// PHY Packet Processor
-
-/*---------------------------------------------------------------------------
- * Name: PhyHwInit
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyHwInit
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetPromiscuous
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetPromiscuous
-(
- bool_t mode
-);
-
-/*---------------------------------------------------------------------------
-* Name: PhySetActivePromState()
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void PhySetActivePromiscuous
-(
-bool_t state
-);
-
-/*---------------------------------------------------------------------------
-* Name: PhyGetActivePromiscuous()
-* Description: -
-* Parameters: -
-* Return: - TRUE/FALSE
-*---------------------------------------------------------------------------*/
-bool_t PhyGetActivePromiscuous
-(
-void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetPanId
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetPanId
-(
- uint8_t *pPanId,
- uint8_t pan
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetShortAddr
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetShortAddr
-(
- uint8_t *pShortAddr,
- uint8_t pan
-);
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetLongAddr
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetLongAddr
-(
- uint8_t *pLongAddr,
- uint8_t pan
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetMacRole
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetMacRole
-(
- bool_t macRole,
- uint8_t pan
-);
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpIsTxAckDataPending
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpIsTxAckDataPending
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpIsRxAckDataPending
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpIsRxAckDataPending
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetFpManually
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetFpManually
-(
- bool_t FP
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpIsPollIndication
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpIsPollIndication
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetSAMState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetSAMState
-(
- bool_t state
-);
-
-/*---------------------------------------------------------------------------
- * Name: Phy_IndirectQueueChecksum
- * Description: Function called to compute the checksum for a 16bit or 64bit address
- * in the same way as the transceiver
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-#ifdef gPHY_802_15_4g_d
-uint16_t Phy_IndirectQueueChecksum
-(
- bool_t addrType,
- uint64_t address,
- uint16_t panId
-);
-#endif // gPHY_802_15_4g_d
-
-/*---------------------------------------------------------------------------
- * Name: PhyPp_IndirectQueueInsert
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPp_IndirectQueueInsert
-(
- uint8_t index,
- uint16_t checkSum,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPp_RemoveFromIndirect
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPp_RemoveFromIndirect
-(
- uint8_t index,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpGetState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPpGetState
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhySetState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-#ifdef gPHY_802_15_4g_d
-void PhySetState
-(
- uint8_t phyState
-);
-#endif //gPHY_802_15_4g_d
-
-/*---------------------------------------------------------------------------
- * Name: PhyAbort
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyAbort
-(
- void
-);
-
-// PHY PLME & DATA primitives
-
-/*---------------------------------------------------------------------------
- * Name: PhyPdDataRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPdDataRequest
-(
- pdDataReq_t *pTxPacket,
- volatile phyRxParams_t *pRxParams,
- volatile phyTxParams_t *pTxParams
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeRxRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeRxRequest
-(
- phySlottedMode_t phyRxMode,
- phyRxParams_t * pRxParams
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeCcaEdRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeCcaEdRequest
-(
- phyCCAType_t ccaParam,
- phyContCCAMode_t cccaMode
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetCurrentChannelRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeSetCurrentChannelRequest
-(
- uint8_t channel,
- uint8_t pan
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeGetCurrentChannelRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeGetCurrentChannelRequest
-(
- uint8_t pan
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetPwrLevelRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeSetPwrLevelRequest
-(
- uint8_t pwrStep
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeGetPwrLevelRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeGetPwrLevelRequest
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetPwrState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeSetPwrState
-(
- uint8_t state
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetPIBRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeSetPIBRequest
-(
- phyPibId_t pibId,
- uint64_t pibValue,
- uint8_t phyRegistrySet,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeGetPIBRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeGetPIBRequest
-(
- phyPibId_t pibId,
- uint64_t * pibValue,
- uint8_t phyRegistrySet,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetCcaThreshold
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-
-phyStatus_t PhyPpSetCcaThreshold
-(
- uint8_t ccaThreshold
-);
-
-// PHY Time
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeSetEventTrigger
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeSetEventTrigger
-(
- phyTime_t startTime
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeSetEventTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeSetEventTimeout
-(
- phyTime_t *pEndTime
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeGetEventTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint32_t PhyTimeGetEventTimeout( void );
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeReadClock
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeReadClock
-(
- phyTime_t *pRetClk
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeDisableEventTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeDisableEventTimeout
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeDisableEventTrigger
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeDisableEventTrigger
-(
- void
-);
-
-
-#ifdef gPHY_802_15_4g_d
-/*---------------------------------------------------------------------------
- * Name: PhyTimeDisableRxTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeDisableRxTimeout
-(
- void
-);
-#endif // gPHY_802_15_4g_d
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeSetWakeUpTime
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeSetWakeUpTime
-(
- uint32_t *pWakeUpTime
-);
-/*---------------------------------------------------------------------------
- * Name: PhyTimeInitEventTimer
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeInitEventTimer
-(
- uint32_t *pAbsTime
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeIsWakeUpTimeExpired
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyTimeIsWakeUpTimeExpired
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeSetWaitTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeSetWaitTimeout
-(
- phyTime_t *pWaitTimeout
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeDisableWaitTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeDisableWaitTimeout
-(
- void
-);
-
-// PHY ISR
-
-/*---------------------------------------------------------------------------
- * Name: PHY_InstallIsr
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PHY_InstallIsr
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PHY_InterruptHandler
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PHY_InterruptHandler
-(
- void
-);
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyIsrPassRxParams()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyIsrPassRxParams
-(
- volatile phyRxParams_t * pRxParam
-);
-
-#ifdef gPHY_802_15_4g_d
-/*---------------------------------------------------------------------------
- * Name: PhyIsrPassRxParams()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPassTxParams
-(
- pdDataReq_t *pTxParam
-);
-#endif // gPHY_802_15_4g_d
-
-/*---------------------------------------------------------------------------
- * Name: PhyIsrPassTaskParams()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyIsrPassTaskParams
-(
- instanceId_t instanceId
-);
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyIsrTimeoutCleanup
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyIsrTimeoutCleanup
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyIsrSeqCleanup
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyIsrSeqCleanup
-(
- void
-);
-
-/*****************************************************************************
-* PhyGetRandomNo function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyGetRandomNo
-(
- uint32_t *pRandomNo
-);
-
-/*****************************************************************************
-* PhyPpSetDualPanAuto function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyPpSetDualPanAuto
-(
- bool_t mode
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanAuto function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-bool_t PhyPpGetDualPanAuto
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpSetDualPanDwell function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyPpSetDualPanDwell
-(
- uint8_t
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanDwell function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-uint8_t PhyPpGetDualPanDwell
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanRemain function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The remaining time until a channel switch will occure
-*****************************************************************************/
-uint8_t PhyPpGetDualPanRemain
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpSetDualPanSamLvl function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyPpSetDualPanSamLvl
-(
- uint8_t
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanSamLvl function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The level at which the HW queue is split for the two PANs
-*****************************************************************************/
-uint8_t PhyPpGetDualPanSamLvl
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpSetDualPanSamLvl function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyPpSetDualPanActiveNwk
-(
- uint8_t
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanActiveNwk function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The current NWK on which the PHY is operating
-*****************************************************************************/
-uint8_t PhyPpGetDualPanActiveNwk
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpGetPanOfRxPacket function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The PAN on which the packet was received (can be receiced on both PANs)
-*****************************************************************************/
-uint8_t PhyPpGetPanOfRxPacket
-(
- void
-);
-
-#ifdef gPHY_802_15_4g_d
-/*---------------------------------------------------------------------------
- * Name: PhyPpPassTaskParams()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpPassTaskParams
-(
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetCSLRxEnabled()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetCSLRxEnabled
-(
- bool_t cslRx,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPib_SetCSLTxEnabled()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetCSLTxEnabled
-(
- bool_t cslTx,
- instanceId_t instanceId
-);
-#endif // gPHY_802_15_4g_d
-
-/*****************************************************************************
-* PhyGetLastRxLqiValue function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The LQI value for the last received packet
-*****************************************************************************/
-uint8_t PhyGetLastRxLqiValue(void);
-
-/*****************************************************************************
-* PhyGetLastRxRssiValue function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The RSSI value for the last received packet
-*****************************************************************************/
-uint8_t PhyGetLastRxRssiValue(void);
-
-/*****************************************************************************
-* PhyPlmeSetFADStateRequest function
-*
-* Interface assumptions: state
-*
-* Return Value: gPhySuccess
-*
-* Description: Enable the FAD function (FAD_EN bit)
-*****************************************************************************/
-uint8_t PhyPlmeSetFADStateRequest(bool_t state);
-
-/*****************************************************************************
-* PhyPlmeSetFADThresholdRequest function
-*
-* Interface assumptions: FADThreshold
-*
-* Return Value: gPhySuccess
-*
-* Description: Correlator threshold at which the FAD will select the antenna
-*****************************************************************************/
-uint8_t PhyPlmeSetFADThresholdRequest(uint8_t FADThreshold);
-
-uint8_t PhyPlmeSetANTPadStateRequest(bool_t antAB_on, bool_t rxtxSwitch_on);
-uint8_t PhyPlmeSetANTPadStrengthRequest(bool_t hiStrength);
-uint8_t PhyPlmeSetANTPadInvertedRequest(bool_t invAntA, bool_t invAntB, bool_t invTx, bool_t invRx);
-
-/*****************************************************************************
-* PhyPlmeSetANTXStateRequest function
-*
-* Interface assumptions: state
-*
-* Return Value: gPhySuccess
-*
-* Description: ANTX_IN - FAD Antenna start when FAD_EN = 1 or antenna selected
-* when FAD_EN=0
-*****************************************************************************/
-uint8_t PhyPlmeSetANTXStateRequest(bool_t state);
-
-/*****************************************************************************
-* PhyPlmeGetANTXStateRequest function
-*
-* Interface assumptions: none
-*
-* Return Value: Chosen antenna by the FAD (FAD_EN = 1) or copy of ANTX_IN
-*
-* Description: Antenna selected in FAD of non-FAD mode
-*****************************************************************************/
-uint8_t PhyPlmeGetANTXStateRequest(void);
-
-/*****************************************************************************
-* PhyPlmeSetLQIModeRequest function
-*
-* Interface assumptions: none
-*
-* Return Value: gPhySuccess
-*
-* Description: Choose LQI Mode: 1 - LQI Based on RSSI,
-* 0 - LQI Based on Correlation Peaks
-*****************************************************************************/
-uint8_t PhyPlmeSetLQIModeRequest(uint8_t lqiMode);
-
-/*****************************************************************************
-* PhyPlmeGetRSSILevelRequest function
-*
-* Interface assumptions: none
-*
-* Return Value: RSSI level
-*
-* Description: Returns the RSSI level value, refreshed every 125us
-*****************************************************************************/
-uint8_t PhyPlmeGetRSSILevelRequest(void);
-
-#ifdef gPHY_802_15_4g_d
-/*****************************************************************************
-* PhyPlmeDataPassTaskParams function
-*
-* Interface assumptions: none
-*
-* Return Value:
-*
-* Description:
-*****************************************************************************/
-void PhyPlmeDataPassTaskParams(instanceId_t instanceId);
-#endif // gPHY_802_15_4g_d
-
-/*****************************************************************************
-* PhySetRxOnWhenIdle function
-*
-* Interface assumptions: none
-*
-* Return Value: None.
-*
-* Description: Informs the PHY if it should start an RX when entering IDLE or not
-*****************************************************************************/
-void PhyPlmeSetRxOnWhenIdle( bool_t state, instanceId_t instanceId );
-
-/*****************************************************************************
-* PhyPlmeSetFrameWaitTime function
-*
-* Interface assumptions: none
-*
-* Return Value: None.
-*
-* Description: Set the amount of time in symbols to wait for an data frame
-* after receiving an ACK with FP=1
-*****************************************************************************/
-void PhyPlmeSetFrameWaitTime( uint32_t time, instanceId_t instanceId );
-
-/*****************************************************************************
-* Phy_SetSequenceTiming function
-*
-* Interface assumptions: none
-*
-* Return Value: None.
-*
-* Description:
-*
-*****************************************************************************/
-#ifndef gPHY_802_15_4g_d
-void Phy_SetSequenceTiming(phyTime_t startTime, uint32_t seqDuration);
-#else
-void Phy_SetSequenceTiming(phyTime_t startTime, uint32_t seqDuration, uint8_t nextState, instanceId_t instanceId);
-void Phy_SetRxTiming(uint32_t seqDuration, uint8_t nextState, instanceId_t instanceId);
-#endif // gPHY_802_15_4g_d
-
-uint8_t Phy_GetEnergyLevel(uint8_t energyLeveldB);
-
-// RADIO EVENTS
-
-void Radio_Phy_PdDataConfirm(instanceId_t instanceId, bool_t framePending);
-
-void Radio_Phy_TimeWaitTimeoutIndication(instanceId_t instanceId);
-
-void Radio_Phy_TimeRxTimeoutIndication(instanceId_t instanceId);
-
-void Radio_Phy_PdDataIndication(instanceId_t instanceId);
-
-void Radio_Phy_TimeStartEventIndication(instanceId_t instanceId);
-
-void Radio_Phy_PlmeCcaConfirm(phyStatus_t phyChannelStatus, instanceId_t instanceId);
-
-void Radio_Phy_PlmeEdConfirm(uint8_t energyLeveldB, instanceId_t instanceId);
-
-void Radio_Phy_PlmeSyncLossIndication(instanceId_t instanceId);
-
-void Radio_Phy_PlmeRxSfdDetect(instanceId_t instanceId, uint32_t param);
-
-void Radio_Phy_PlmeFilterFailRx(instanceId_t instanceId);
-
-#ifdef gPHY_802_15_4g_d
-void Radio_Phy_WaitTurnaround(instanceId_t instanceId);
-void Radio_Phy_WaitTurnaroundComplete(instanceId_t instanceId);
-#endif
-
-void Radio_Phy_UnexpectedTransceiverReset(instanceId_t instanceId);
-
-void Radio_Phy_DummyEvent(instanceId_t instanceId);
-
-bool_t PhyIsIdleRx( instanceId_t instanceId );
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __PHY_H__ */