AT command firmware for MultiTech Dot devices.

Fork of mDot_AT_firmware by MultiTech

Dot Library Not Included!

Because these example programs can be used for both mDot and xDot devices, the LoRa stack is not included. The libmDot library should be imported if building for mDot devices. The libxDot library should be imported if building for xDot devices. Check the commit messages of the Dot library version used to find the correct mbed-os version to use with it. The mbed-os version must match the version used in that version of Dot library or it will likely cause it to fail to compile or have unexpected problems while running.

Dot Library Version 3 Updates

Dot Library versions 3.x.x require a channel plan to be injected into the stack. The Dot-Examples and Dot-AT-Firmware do this by defining a macro called "CHANNEL_PLAN" that controls the channel plan that will be used in the examples. Available channel plans will be in the Dot Library repository in the plans folder.

Revision 20 and earlier of Dot-Examples and revision 15 and earlier of Dot-AT-Firmware should be used with Dot Library versions prior to 3.0.0.

Fota Library

Th Fota Library must be added to compile for mDot 3.1.0 with Fota support. Latest dev libraries and 3.2.0 release will include Fota with libmDot/libxDot.

AT Firmware Description

This AT Firmware is what ships on mDot and xDot devices. It provides an AT command interface for using the mDot or xDot for LoRa communication.

AT command documentation can be found on Multitech.com.

The firmware changelog can be found here. The library changelog can be found here.

Dot Libraries

Dot Library Limitations

The commit messages in libmDot-mbed5 and libmDot-dev-mbed5 specify the version of the Dot library the commit contains and the version of mbed-os it was compiled against. We recommend building your application with the version of mbed-os specified in the commit message of the version of the Dot library you're using. This will ensure that you don't run into any runtime issues caused by differences in the mbed-os versions.

Stable and development libraries are available for both mDot and xDot platforms. The library chosen must match the target platform. Compiling for the mDot platform with the xDot library or vice versa will not succeed.

mDot Library

Development library for mDot.

libmDot-dev

Stable library for mDot.

libmDot

xDot Library

Development library for xDot.

libxDot-dev

Stable library for xDot.

libxDot

CommandTerminal/CommandFactory.cpp

Committer:
Jason Reiss
Date:
2020-09-11
Revision:
27:5fafd3b26ac3
Child:
28:c222ca8383f4

File content as of revision 27:5fafd3b26ac3:

#include "CommandFactory.h"

Command* CommandFactory::Create(CmdId_t cmd)
{
    switch (cmd) {
    case eAT:
        return new CmdAttention();
    case eATI:
        return new CmdIdentification();
    case eLW:
        return new CmdDummy("LoRaWAN MAC Version", "AT+LW", "Show support LoRaWAN MAC Version", "");
    case eATZ:
        return new CmdResetCpu();
    case eATE:
        return new CmdDummy("Enable/Disable Echo", "ATE", "ATE0: disable, ATE1: enable", "(0,1)");
    case eATVERBOSE:
        return new CmdDummy("Enable/Disable Verbose", "ATV", "ATV0: disable, ATV1: enable", "(0,1)");
    case eATK:
        return new CmdDummy("Hardware Flow Control", "AT&K", "AT&K0: disable, AT&K3: enable", "(0,3)");
    case eATF:
        return new CmdFactoryDefault();
    case eATW:
        return new CmdSaveConfig();
    case eATV:
        return new CmdDisplayConfig();
    case eATS:
        return new CmdDisplayStats();
    case eATR:
        return new CmdResetStats();
    case eIPR:
        return new CmdSerialBaudRate();
    case eDIPR:
        return new CmdDebugBaudRate();
    case eSMODE:
        return new CmdStartUpMode();
    case eDFREQ:
        return new CmdDefaultFrequencyBand();
    case eFREQ:
        return new CmdFrequencyBand();
    case eFSB:
        return new CmdFrequencySubBand();
    case ePN:
        return new CmdPublicNetwork();
    case eDI:
        return new CmdDeviceId();
    case eDC:
        return new CmdDeviceClass();
    case eLBT:
        return new CmdLbt();
    case eAP:
        return new CmdAppPort();
    case eNA:
        return new CmdNetworkAddress();
    case eNSK:
        return new CmdNetworkSessionKey();
    case eDSK:
        return new CmdDataSessionKey();
    case eULC:
        return new CmdUplinkCounter();
    case eDLC:
        return new CmdDownlinkCounter();
    case eSS:
        return new CmdSaveSession();
    case eRS:
        return new CmdRestoreSession();
    case eNK:
        return new CmdNetworkKey();
    case eGK:
        return new CmdGenAppKey();
    case eNI:
        return new CmdNetworkId();
    case eJD:
        return new CmdJoinDelay();
    case eJOIN:
        return new CmdJoinRequest();
    case eJR:
        return new CmdJoinRetries();
    case eJN:
        return new CmdJoinNonce();
    case eJNV:
        return new CmdJoinNonceValidation();
    case eNJM:
        return new CmdNetworkJoinMode();
    case ePS:
        return new CmdPreserveSession();
    case eNJS:
        return new CmdNetworkJoinStatus();
    case eNLC:
        return new CmdNetworkLinkCheck();
    case eLCC:
        return new CmdLinkCheckCount();
    case eLCT:
        return new CmdLinkCheckThreshold();
    case eENC:
        return new CmdEncryption();
    case eRSSI:
        return new CmdRssi();
    case eSNR:
        return new CmdSnr();
    case eDP:
        return new CmdDataPending();
    case eSDR:
        return new CmdSessionDataRate();
    case eCHM:
        return new CmdChannelMask();
    case eTXDR:
        return new CmdTxDataRate();
    case eTXP:
        return new CmdTxPower();
    case eANT:
        return new CmdAntennaGain();
    case eTXF:
        return new CmdTxFrequency();
    case eFO:
        return new CmdTxFrequencyOffset();
    case eTXW:
        return new CmdTxWait();
    case eTXCH:
        return new CmdTxChannel();
    case eTXN:
        return new CmdTxNextMs();
    case eTXS:
        return new CmdTxNextSize();
    case eTOA:
        return new CmdTimeOnAir();
    case eMCRX:
        return new CmdMulticastRx();
    case eRXD:
        return new CmdRxDelay();
    case eRXO:
        return new CmdRxOutput();
    case eCRC:
        return new CmdCRC();
    case eADR:
        return new CmdAdaptiveDataRate();
    case eACK:
        return new CmdACKAttempts();
    case eREP:
        return new CmdRepeat();
    case ePP:
        return new CmdPingPeriod();
    case eMAC:
        return new CmdMacCmd();
    case eSEND:
        return new CmdSendString();
    case eSENDB:
        return new CmdSendBinary();
    case eRECV:
        return new CmdReceiveOnce();
    case eURC:
        return new CmdDummy("Unsolicited Response Code", "AT+URC", "Output packets to terminal when received", "(0,1)");
    case eSD:
        return new CmdDummy("Serial Data Mode", "AT+SD", "Enter serial data mode, exit with '+++'", "NONE");
    case eSLEEP:
        return new CmdDummy("Sleep Mode", "AT+SLEEP", "Enter sleep mode (0:deepsleep,1:sleep)", "(0,1)");
    case eSDCE:
        return new CmdSerialClearOnError();
    case eWM:
        return new CmdWakeMode();
    case eWI:
        return new CmdWakeInterval();
    case eWP:
        return new CmdWakePin();
    case eWD:
        return new CmdWakeDelay();
    case eWTO:
        return new CmdWakeTimeout();
    case ePING:
        return new CmdPing();
    case eLOG:
        return new CmdLogLevel();
    case eFOTA:
        return new CmdFota();
    case eGPSTIME:
        return new CmdGpsTime();
    case eBLS:
        return new CmdBeaconLockStatus();
    case eLBTRSSI:
        return new CmdLBTRSSI();
    case eBAT:
        return new CmdBatteryLevel();
    case ePRINT_TEST:
        return new CmdDummy("***** Test Commands *****", "", "", "");
    case eRXDR:
        return new CmdRxDataRate();
    case eSENDI:
        return new CmdSendStringOnInterval();
    case eSENDC:
        return new CmdSendContinuous();
    case eMEM:
        return new CmdFreeMemory();
#if defined(TARGET_MTS_MDOT_F411RE)
    case eREPAIR:
        return new CmdRepairFlash();
#endif
    case eATWP:
        return new CmdWriteProtectedConfig();
    case eDREGS:
        return new CmdDumpRegisters();
#ifdef MTS_RADIO_DEBUG_COMMANDS
    case ePRINT_DEBUG:
        return new CmdDummy("***** Debug Commands *****", "", "", "");
    case eERASE:
        return new CmdEraseFlash();
    case eDD:
        return new CmdDisableDutyCycle();
    case eRXF:
        return new CmdRxFrequency();
    case eRECVC:
        return new CmdReceiveContinuous();
#endif
    default:
        return NULL;
    }
}