Class Module for MMA845x I2C Accelerometer.
Dependents: mDotEVBM2X MTDOT-EVBDemo-DRH MTDOT-BOX-EVB-Factory-Firmware-LIB-108 MTDOT-UDKDemo_Senet ... more
Fork of MMA845x by
MMA845x.cpp
- Committer:
- sam_grove
- Date:
- 2013-03-29
- Revision:
- 0:9d1e3a344e4f
- Child:
- 1:41af2b3eefb5
File content as of revision 0:9d1e3a344e4f:
/** * @file MMA845x.cpp * @brief Device driver - MMA845X 3-axis accelerometer IC * @author sam grove * @version 1.0 * @see http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8451Q.pdf * @see http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8452Q.pdf * @see http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8453Q.pdf * * Copyright (c) 2013 * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "MMA845x.h" MMA845x::MMA845x(I2C &i2c, InterruptIn &int1, InterruptIn &int2, MMA845x_SA0 const i2c_addr) { _i2c = &i2c; _int1 = &int1; _int2 = &int2; _i2c_addr = (0x1c << 2) | (i2c_addr << 0x1); return; } void MMA845x::init(void) const { uint8_t reg_val = 0; _i2c->frequency(400000); // Reset all registers to POR values MMA845x::writeRegister(CTRL_REG2, 0xFF); //REG 0x2B do{ // wait for the reset bit to clear reg_val = MMA845x::readRegister(CTRL_REG2) & 0x40; }while(reg_val); // setup the registers that are common among modes MMA845x::writeRegister(CTRL_REG1, 0xd8); //REG 0x2A MMA845x::writeRegister(CTRL_REG2, 0x00); //REG 0x2B MMA845x::writeRegister(CTRL_REG3, 0x00); //REG 0x2C MMA845x::writeRegister(XYZ_DATA_CFG, 0x0); //REG 0xE HPF / scale +/-2,4,8g MMA845x::writeRegister(HP_FILTER_CUTOFF, 0x0); //REG 0xF HPF settings return; } void MMA845x::enableDataReadyMode(void) const { MMA845x::init(); MMA845x::writeRegister(SYSMOD, 0x1); //REG 0x0B MMA845x::writeRegister(INT_SOURCE, 0x1); //REG 0x0C // need to finish up these config registers..... 3/8/13 } void MMA845x::enableMotionMode(void) const{} void MMA845x::enablePulseMode(void) const{} void MMA845x::enableOrientationMode(void) const { uint16_t who_am_i = MMA845x::readRegister(WHO_AM_I); if(who_am_i != MMA8451) { error("%s %d: Feature not compatible with the connected device.\n", __FILE__, __LINE__); } return; } void MMA845x::enableTransitMode(void) const{} void MMA845x::enableAutoSleepMode(void) const{} void MMA845x::enableFIFOMode(void) const { uint16_t who_am_i = MMA845x::readRegister(WHO_AM_I); if(who_am_i != MMA8451) { error("%s %d: Feature not compatible with the connected device.\n", __FILE__, __LINE__); } //MMA845x::writeRegister( return; } uint16_t MMA845x::getX(void) const { return _data._x; } uint16_t MMA845x::getY(void) const { return _data._y; } uint16_t MMA845x::getZ(void) const { return _data._z; } MMA845x_DATA MMA845x::getXYZ(void) const { return _data; } void MMA845x::writeRegister(uint8_t const reg, uint8_t const data) const { char buf[2] = {reg, data}; uint8_t result = 0; __disable_irq(); // Tickers and other timebase events can jack up the I2C bus for some deicse result = _i2c->write(_i2c_addr, buf, 2); __enable_irq(); // Just need to block during the transaction if(0 != result) { error("%s %d: I2c write failed\n", __FILE__, __LINE__); } return; } uint8_t MMA845x::readRegister(uint8_t const reg) const { uint8_t result = 1, data = 0; __disable_irq(); // Tickers and other timebase events can jack up the I2C bus _i2c->start(); result &= _i2c->write(_i2c_addr); result &= _i2c->write(reg); // issue a repeated start... _i2c->start(); result &= _i2c->write(_i2c_addr | 0x01); // read with nak data = _i2c->read(0); _i2c->stop(); __enable_irq(); // Just need to block during the transaction if(1 != result) { error("%s %d: I2C read failed\n", __FILE__, __LINE__); } return data; } void MMA845x::registerDump(void) const { uint8_t reg_val = 0; for(int i=0; i<0x80; i++) { reg_val = MMA845x::readRegister(i); printf("Reg 0x%02x: 0x%02x \n", i, reg_val); } return; }