Microbug
bugfix for duplicate symbol
Fork of
nRF51822
by 
Nordic Semiconductor
Diff: nordic-sdk/components/libraries/gpiote/app_gpiote.h
- Revision:
- 177:7a1917171a20
- Parent:
- 111:be2a122ed2f7
diff -r be2a122ed2f7 -r 7a1917171a20 nordic-sdk/components/libraries/gpiote/app_gpiote.h
--- a/nordic-sdk/components/libraries/gpiote/app_gpiote.h Wed Apr 15 09:24:27 2015 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,219 +0,0 @@
-/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
- *
- * The information contained herein is property of Nordic Semiconductor ASA.
- * Terms and conditions of usage are described in detail in NORDIC
- * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
- *
- * Licensees are granted free, non-transferable use of the information. NO
- * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
- * the file.
- *
- */
-
-/** @file
- *
- * @defgroup app_gpiote GPIOTE Handler
- * @{
- * @ingroup app_common
- *
- * @brief GPIOTE handler module.
- *
- * @details The GPIOTE handler allows several modules ("users") to share the GPIOTE interrupt,
- * each user defining a set of pins able to generate events to the user.
- * When a GPIOTE interrupt occurs, the GPIOTE interrupt handler will call the event handler
- * of each user for which at least one of the pins generated an event.
- *
- * The GPIOTE users are responsible for configuring all their corresponding pins, except
- * the SENSE field, which should be initialized to GPIO_PIN_CNF_SENSE_Disabled.
- * The SENSE field will be updated by the GPIOTE module when it is enabled or disabled,
- * and also while it is enabled.
- *
- * The module specifies on which pins events should be generated if the pin(s) goes
- * from low->high or high->low or both directions.
- *
- * @note Even if the application is using the @ref app_scheduler, the GPIOTE event handlers will
- * be called directly from the GPIOTE interrupt handler.
- *
- * @warning If multiple users registers for the same pins the behavior for those pins are undefined.
- */
-
-#ifndef APP_GPIOTE_H__
-#define APP_GPIOTE_H__
-
-#include <stdint.h>
-#include <stdbool.h>
-#include "nrf.h"
-#include "app_error.h"
-#include "app_util.h"
-
-#define GPIOTE_USER_NODE_SIZE 20 /**< Size of app_gpiote.gpiote_user_t (only for use inside APP_GPIOTE_BUF_SIZE()). */
-#define NO_OF_PINS 32 /**< Number of GPIO pins on the nRF51 chip. */
-
-/**@brief Compute number of bytes required to hold the GPIOTE data structures.
- *
- * @param[in] MAX_USERS Maximum number of GPIOTE users.
- *
- * @return Required buffer size (in bytes).
- */
-#define APP_GPIOTE_BUF_SIZE(MAX_USERS) ((MAX_USERS) * GPIOTE_USER_NODE_SIZE)
-
-typedef uint8_t app_gpiote_user_id_t;
-
-/**@brief GPIOTE event handler type. */
-typedef void (*app_gpiote_event_handler_t)(uint32_t event_pins_low_to_high,
- uint32_t event_pins_high_to_low);
-
-/**@brief GPIOTE input event handler type. */
-typedef void (*app_gpiote_input_event_handler_t)(void);
-
-/**@brief Macro for initializing the GPIOTE module.
- *
- * @details It will handle dimensioning and allocation of the memory buffer required by the module,
- * making sure that the buffer is correctly aligned.
- *
- * @param[in] MAX_USERS Maximum number of GPIOTE users.
- *
- * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
- * several times as long as it is from the same location, e.g. to do a reinitialization).
- */
-/*lint -emacro(506, APP_GPIOTE_INIT) */ /* Suppress "Constant value Boolean */
-#define APP_GPIOTE_INIT(MAX_USERS) \
- do \
- { \
- static uint32_t app_gpiote_buf[CEIL_DIV(APP_GPIOTE_BUF_SIZE(MAX_USERS), sizeof(uint32_t))];\
- uint32_t ERR_CODE = app_gpiote_init((MAX_USERS), app_gpiote_buf); \
- APP_ERROR_CHECK(ERR_CODE); \
- } while (0)
-
-/**@brief Function for initializing the GPIOTE module.
- *
- * @note Normally initialization should be done using the APP_GPIOTE_INIT() macro, as that will
- * allocate the buffer needed by the GPIOTE module (including aligning the buffer correctly).
- *
- * @param[in] max_users Maximum number of GPIOTE users.
- * @param[in] p_buffer Pointer to memory buffer for internal use in the app_gpiote
- * module. The size of the buffer can be computed using the
- * APP_GPIOTE_BUF_SIZE() macro. The buffer must be aligned to
- * a 4 byte boundary.
- *
- * @retval NRF_SUCCESS Successful initialization.
- * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte
- * boundary).
- */
-uint32_t app_gpiote_init(uint8_t max_users, void * p_buffer);
-
-/**@brief Function for registering a GPIOTE user.
- *
- * @param[out] p_user_id Id for the new GPIOTE user.
- * @param[in] pins_low_to_high_mask Mask defining which pins will generate events to this user
- * when state is changed from low->high.
- * @param[in] pins_high_to_low_mask Mask defining which pins will generate events to this user
- * when state is changed from high->low.
- * @param[in] event_handler Pointer to function to be executed when an event occurs.
- *
- * @retval NRF_SUCCESS Successful initialization.
- * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte boundary).
- * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
- * module.
- * @retval NRF_ERROR_NO_MEM Returned if the application tries to register more users
- * than defined when the GPIOTE module was initialized in
- * @ref app_gpiote_init.
- */
-uint32_t app_gpiote_user_register(app_gpiote_user_id_t * p_user_id,
- uint32_t pins_low_to_high_mask,
- uint32_t pins_high_to_low_mask,
- app_gpiote_event_handler_t event_handler);
-
-/**@brief Function for informing the GPIOTE module that the specified user wants to use the GPIOTE module.
- *
- * @param[in] user_id Id of user to enable.
- *
- * @retval NRF_SUCCESS On success.
- * @retval NRF_ERROR_INVALID_PARAM Invalid user_id provided, No a valid user.
- * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
- * module.
- */
-uint32_t app_gpiote_user_enable(app_gpiote_user_id_t user_id);
-
-/**@brief Function for informing the GPIOTE module that the specified user is done using the GPIOTE module.
- *
- * @param[in] user_id Id of user to enable.
- *
- * @return NRF_SUCCESS On success.
- * @retval NRF_ERROR_INVALID_PARAM Invalid user_id provided, No a valid user.
- * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
- * module.
- */
-uint32_t app_gpiote_user_disable(app_gpiote_user_id_t user_id);
-
-/**@brief Function for getting the state of the pins which are registered for the specified user.
- *
- * @param[in] user_id Id of user to check.
- * @param[out] p_pins Bit mask corresponding to the pins configured to generate events to
- * the specified user. All bits corresponding to pins in the state
- * 'high' will have value '1', all others will have value '0'.
- *
- * @return NRF_SUCCESS On success.
- * @retval NRF_ERROR_INVALID_PARAM Invalid user_id provided, No a valid user.
- * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
- * module.
- */
-uint32_t app_gpiote_pins_state_get(app_gpiote_user_id_t user_id, uint32_t * p_pins);
-
-/**@brief Function for registering event handlers for GPIOTE IN events.
- *
- * @param[in] channel GPIOTE channel [0..3].
- * @param[in] pin Pins associated with GPIOTE channel. Changes on following pins will generate events.
- * @param[in] polarity Specify operation on input that shall trigger IN event.
- * @param[in] event_handler Event handler invoked on the IN event in the GPIOTE interrupt.
- *
- * @return NRF_SUCCESS On success.
- * @retval NRF_ERROR_INVALID_PARAM Invalid channel or pin number.
- * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support IN events.
- */
-uint32_t app_gpiote_input_event_handler_register(const uint8_t channel,
- const uint32_t pin,
- const uint32_t polarity,
- app_gpiote_input_event_handler_t event_handler);
-
-/**@brief Function for unregistering event handlers for GPIOTE IN events.
- *
- * @return NRF_SUCCESS On success.
- * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support IN events.
- */
-uint32_t app_gpiote_input_event_handler_unregister(const uint8_t channel);
-
-/**@brief Function for registering event handler invoked at the end of a GPIOTE interrupt.
- *
- * @param[in] event_handler Event handler invoked at the end of the GPIOTE interrupt.
- *
- * @return NRF_SUCCESS On success.
- * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support IN events.
- */
-uint32_t app_gpiote_end_irq_event_handler_register(app_gpiote_input_event_handler_t event_handler);
-
-/**@brief Function for unregistering event handler invoked at the end of a GPIOTE interrupt.
- *
- * @return NRF_SUCCESS On success.
- * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support IN events.
- */
-uint32_t app_gpiote_end_irq_event_handler_unregister(void);
-
-/**@brief Function for enabling interrupts in the GPIOTE driver.
- *
- * @return NRF_SUCCESS On success.
- * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support.
- */
-uint32_t app_gpiote_enable_interrupts(void);
-
-/**@brief Function for disabling interrupts in the GPIOTE driver.
- *
- * @return NRF_SUCCESS On success.
- * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support.
- */
-uint32_t app_gpiote_disable_interrupts(void);
-
-
-#endif // APP_GPIOTE_H__
-
-/** @} */
\ No newline at end of file