Diff: hw/nRF51822s/nRF51GattServer.cpp

Revision:

31:2c94f0501807

Parent:

30:9614522cf932

Child:

32:874ec944b552

--- a/hw/nRF51822s/nRF51GattServer.cpp	Fri Jan 17 14:25:29 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,197 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-  
-#include "nRF51GattServer.h"
-#include "mbed.h"
-
-/* ToDo: Convert to Singleton! */
-
-/**************************************************************************/
-/*!
-    @brief  Constructor
-*/
-/**************************************************************************/
-nRF51GattServer::nRF51GattServer(RawSerial &serial): GattServer(), uart(serial)
-{
-    /* Reset the service and characteristic counters */
-    serviceCount = 0;
-    characteristicCount = 0;
-}
-
-/**************************************************************************/
-/*!
-    @brief  Destructor
-*/
-/**************************************************************************/
-nRF51GattServer::~nRF51GattServer(void)
-{
-}
-
-/**************************************************************************/
-/*!
-    @brief  Adds a new service to the GATT table on the peripheral
-            
-    @returns    ble_error_t
-    
-    @retval     BLE_ERROR_NONE
-                Everything executed properly
-                
-    @section EXAMPLE
-
-    @code
-
-    @endcode
-*/
-/**************************************************************************/
-ble_error_t nRF51GattServer::addService(GattService & service)
-{
-    /* ToDo: Make sure we don't overflow the array, etc. */
-    /* ToDo: Make sure this service UUID doesn't already exist (?) */
-    /* ToDo: Basic validation */
-    
-    /* Add the service to the nRF51 */
-    if (service.primaryServiceID.type == UUID::UUID_TYPE_SHORT)
-    {
-        /* 16-bit BLE UUID */
-        uart.printf("10 01 00 04 01 02 %02X %02X\r\n",
-                    service.primaryServiceID.value & 0xFF,
-                    service.primaryServiceID.value >> 8);
-    }
-    else
-    {
-        /* 128-bit Custom UUID */
-        uart.printf("10 01 00 12 01 10 %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\r\n",
-            service.primaryServiceID.base[0], 
-            service.primaryServiceID.base[1], 
-            service.primaryServiceID.base[2], 
-            service.primaryServiceID.base[3], 
-            service.primaryServiceID.base[4], 
-            service.primaryServiceID.base[5], 
-            service.primaryServiceID.base[6], 
-            service.primaryServiceID.base[7], 
-            service.primaryServiceID.base[8], 
-            service.primaryServiceID.base[9], 
-            service.primaryServiceID.base[10], 
-            service.primaryServiceID.base[11], 
-            service.primaryServiceID.base[12], 
-            service.primaryServiceID.base[13], 
-            service.primaryServiceID.base[14], 
-            service.primaryServiceID.base[15]);
-    }
-    
-    /* ToDo: Check response */
-    wait(0.1);
-    
-    /* Add characteristics to the service */
-    for (uint8_t i = 0; i < service.characteristicCount; i++)
-    {
-        /* Command ID = 0x0002 */
-        uart.printf("10 02 00 0F 01 02 %02X %02X 04 02 %02X %02X 05 02 %02X %02X 03 01 %02X\r\n",
-                    service.characteristics[i].uuid & 0xFF, 
-                    service.characteristics[i].uuid >> 8,
-                    service.characteristics[i].lenMin & 0xFF,
-                    service.characteristics[i].lenMin >> 8,
-                    service.characteristics[i].lenMax & 0xFF,
-                    service.characteristics[i].lenMax >> 8,
-                    service.characteristics[i].properties);
-                    
-        /* ToDo: Check response */
-        wait(0.1);
-        
-        /* Update the characteristic handle */
-        service.characteristics[i].handle = characteristicCount;
-        characteristicCount++;
-    }
-
-    /* Update the service handle */
-    service.handle = serviceCount;
-    serviceCount++;
-    
-    return BLE_ERROR_NONE;
-}
-
-/**************************************************************************/
-/*!
-    @brief  Reads the value of a characteristic, based on the service
-            and characteristic index fields
-
-    @param[in]  charHandle
-                The handle of the GattCharacteristic to read from
-    @param[in]  buffer
-                Buffer to hold the the characteristic's value
-                (raw byte array in LSB format)
-    @param[in]  len
-                The number of bytes read into the buffer
-            
-    @returns    ble_error_t
-    
-    @retval     BLE_ERROR_NONE
-                Everything executed properly
-                
-    @section EXAMPLE
-
-    @code
-
-    @endcode
-*/
-/**************************************************************************/
-ble_error_t nRF51GattServer::readValue(uint8_t charHandle, uint8_t buffer[], uint16_t len)
-{
-    /* ToDo */
-    
-    return BLE_ERROR_NONE;
-}
-
-/**************************************************************************/
-/*!
-    @brief  Updates the value of a characteristic, based on the service
-            and characteristic index fields
-
-    @param[in]  charHandle
-                The handle of the GattCharacteristic to write to
-    @param[in]  buffer
-                Data to use when updating the characteristic's value
-                (raw byte array in LSB format)
-    @param[in]  len
-                The number of bytes in buffer
-            
-    @returns    ble_error_t
-    
-    @retval     BLE_ERROR_NONE
-                Everything executed properly
-                
-    @section EXAMPLE
-
-    @code
-
-    @endcode
-*/
-/**************************************************************************/
-ble_error_t nRF51GattServer::updateValue(uint8_t charHandle, uint8_t buffer[], uint16_t len)
-{
-    /* Command ID = 0x0006, Payload = Characteristic ID, Value */
-    uart.printf("10 06 00 %02X %02X", len + 1, charHandle);
-    for (uint16_t i = 0; i<len; i++)
-    {
-        uart.printf(" %02X", buffer[i]);
-    }
-    uart.printf("\r\n");
-
-    /* ToDo: Check response */
-    wait(0.1);
-    
-    return BLE_ERROR_NONE;
-}