Diff: main.h

Revision:

7:090f9eea7b3c

Parent:

4:1bfa16834dd4

Child:

8:5bb94184842d

--- a/main.h	Tue May 23 13:03:05 2017 +0000
+++ b/main.h	Tue May 23 13:38:38 2017 +0000
@@ -3,57 +3,8 @@
 #define MAIN_H
 
 
-#define UART_DEBUGGING 1 // put a '1' here if you are debugging on the BLE UART, otherwise make it 0. Turns on: shows records being added to log, will not allow a ble connection to timeout
-
 #define FW_VERSION  001 //  major revisions will be 1xx, 2xx, etc.
 
-#define VDD_DELAY   3 // seconds to keep vdd on after PRESS is released.
-
-#define ADC_FREQ        5000   // ADC Sample Frequency in Hz
-#define TICKS_PER_MS    (uint32_t)ADC_FREQ/1000
-
-#define ADC_2o5V    710     // =2.5/3.6*1023
-#define ADC_1o25V   (ADC_2o5V/2)
-#define ADC_MID     (ADC_1o25V)
-
-//*************** Parameters for recognizing a press  *************************
-// Pulse size is in % of the positive range.
-// for the following pulse sizes, 
-//    0=0% (1.25V) pulse rise
-//    100=100% (2.5V) pulse rise which is the max range.
-#define PULSE_BIG         50
-#define PULSE_MED         30
-#define PULSE_THRESHOLD   10
-
-#define ADC_PULSE_BIG           (ADC_MID + (PULSE_BIG*ADC_MID)/100)
-#define ADC_PULSE_MED           (ADC_MID + (PULSE_MED*ADC_MID)/100)
-#define ADC_PULSE_THRESHOLD     (ADC_MID + (PULSE_THRESHOLD*ADC_MID)/100)
-
-
-// <--T1--> |  <--T2-->   | <-T3-> |  <------T4------>   |  
-//<PRESS>                         <RELEASE>
-//            /\
-//           /  \                        /\
-//----------/    \    /-----------------/  \  /----------------------
-//                \  /                      \/
-//                 \/
-
-// the following times are in ms
-// T_PRESS refers to the pulses produced by pressing
-// T_RELEASE refers to the pulses produced by releasing
-#define T_STARTUP       250  //20    // (T1) time after powerup to ignore the input
-#define T_PRESS_MAX     2500 // (T2_MAX) maximum time to look for PRESS pulses 
-#define T_DELAY         500  //180  // (T3) after a press is recognized, delay this time before looking for release pulses
-#define T_RELEASE_MAX   4500 // (T4_MAX) maximum time to look for release pulses
-#define T_RELEASE_UP    100  //500  // (T7) Max time after the button is released that we look for sound.  This can preempt T4_MAX
-#define T_LEDON         2000 // (T5) time led comes on if a valid press/release was detected
-#define T_SHUTDOWN      250  // (T6) In done state, time to delay after switch is released before powering down
-
-// number of pulses needed to validate a PRESS or RELEASE
-#define NUM_PRESS_BIG   1
-#define NUM_PRESS_MED   3
-#define NUM_RELEASE_BIG 1
-#define NUM_RELEASE_MED 3
 
 //******************************************************************************