MAX77658 Ultra-Low Power PMIC Mbed Driver
reg_config2_t Union Reference
Config2. More...
#include <MAX77658_regs.h>
Detailed Description
Config2.
Address : 0xBB
Definition at line 1404 of file MAX77658_regs.h.
Field Documentation
unsigned char dsocen |
Set to 1 to enable SOC 1% change alert.
Bit 7. If dSCOCen=0, the alert on is disabled.
Definition at line 1416 of file MAX77658_regs.h.
unsigned char fc_thmhot |
Set to 1 to enable thermistor hot forcedly, regardless of actually sense thermistor temperature.
Bit 10.
Definition at line 1422 of file MAX77658_regs.h.
unsigned char isys_ncurr |
Sets the time constant for the AvgISys register.
Bit 3:0. The default POR value of 0100b gives a time constant of 5.625. The equation setting the period is: AvgISys time constant = 45s x 2(ISysNCurr-7).
Definition at line 1408 of file MAX77658_regs.h.
unsigned char ldmdl |
Host sets this bit to 1 in order to initiate firmware to finish processing a newly loaded model.
Bit 5. Firmware clears this bit to zero to indicate that model loading is finished.
Definition at line 1412 of file MAX77658_regs.h.
unsigned char qcvqen |
Set OCVQen=1 to enable automatic empty compensation based on VFOCV information.
Bit 4.
Definition at line 1411 of file MAX77658_regs.h.
unsigned char spr |
Bit 15:11.
Definition at line 1423 of file MAX77658_regs.h.
unsigned char tairt_en |
Set to 1 to enable temperature alert.
Bit 6. If TAlrtEn=0, the alert on is disabled.
Definition at line 1414 of file MAX77658_regs.h.
unsigned char thm_hotairt_en |
Set to 1 to enable ThmHotAlrtEn alert.
Bit 8. If ThmHotAlrtEn = 0, the alert on is disabled.
Definition at line 1418 of file MAX77658_regs.h.
unsigned char thmhot_en |
Set to 1 to enable ThmHot function by comparing Voltage/Temp condition with THMHOT (40h).
Bit 9. ThmHot function is FG Charger input current limit control.
Definition at line 1420 of file MAX77658_regs.h.
Generated on Fri Aug 26 2022 12:03:40 by 1.7.2