MAX77658 Ultra-Low Power PMIC Mbed Driver
reg_cnfg_gpio2_t Union Reference
CNFG_GPIO2 Register. More...
#include <MAX77658_regs.h>
Detailed Description
CNFG_GPIO2 Register.
Address : 0x13
Definition at line 371 of file MAX77658_regs.h.
Field Documentation
unsigned char alt_gpio |
Alternate Mode Enable for GPIO2.
Bit 5. 0 = Standard GPIO. 1 = Active-high input, Enable DISQBAT.
Definition at line 391 of file MAX77658_regs.h.
unsigned char dben_gpi |
General Purpose Input Debounce Timer Enable.
Bit 4. 0 = no debounce 1 = 30ms debounce
Definition at line 388 of file MAX77658_regs.h.
unsigned char gpo_di |
GPIO Digital Input Value.
Bit 1. 0 = Input logic low 1 = Input logic high
Definition at line 377 of file MAX77658_regs.h.
unsigned char gpo_dir |
GPIO Direction.
Bit 0. 0 = General purpose output (GPO) 1 = General purpose input (GPI)
Definition at line 374 of file MAX77658_regs.h.
unsigned char gpo_do |
General Purpose Output Data Output.
Bit 3. This bit is a don't care when DIR = 1 (configured as input). When set for GPO (DIR = 0): 0 = GPIO is output is logic low 1 = GPIO is output logic high when set as push-pull output (DRV = 1).
Definition at line 384 of file MAX77658_regs.h.
unsigned char gpo_drv |
General Purpose Output Driver Type.
Bit 2. This bit is a don't care when DIR = 1 (configured as input) When set for GPO (DIR = 0): 0 = Open-Drain 1 = Push-Pull
Definition at line 380 of file MAX77658_regs.h.
unsigned char rsvd |
Reserved.
Bit 7:6. Unutilized bit. Write to 0. Reads are don't care.
Definition at line 394 of file MAX77658_regs.h.
Generated on Fri Aug 26 2022 12:03:40 by 1.7.2