Demonstrates the MAX44000 library and some of the features of the MAX44000
Dependencies: MAX44000 ard2pmod mbed
Fork of ALS_ARD2PMOD_Demo by
MAX44000PMB1 Demonstration
This demonstrates some of the capabilities of the MAX44000. This is written to work with the MAXREFDES72# adapter board and the MAX44000PMB1 peripheral module. It uses the standard Arduino pin names and it will compile for most arduino form-factor mbed boards. To run this demonstration you will need:
- MAX44000PMB1 Ambient Light / Proximity Sensor Peripheral Module
- MAXREFDES72# Pmod Adapter for Arduino Platforms
- An mbed enabled board with an Arduino compatible socket. We recommend the MAX32600MBED
In this demonstration the LEDs are changed based on data from the sensor.
- LED1 toggles when something is first detected by the proximity sensor.
- LED2 indicates when the Ambient Light Sensor reads greater than a set value (alsLim).
- LED3 will stay on whenever something is detected by the proximity sensor and stay on for an additional 5s after it is no longer detected.
Note: Some boards use D13 for an LED signal, so this example uses the second row (row B, pins 7 through 12) of the Pmod connector.
Tested platform boards
Links to external supporting material
- MAX44000PMB1 Ambient Light / Proximity Sensor Peripheral Module
- MAXREFDES72# Pmod Adapter for Arduino Platforms
- MAX32600MBED
Diff: main.cpp
- Revision:
- 0:803011eae289
- Child:
- 1:03aeb304d3b3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Sat Apr 26 03:37:00 2014 +0000 @@ -0,0 +1,15 @@ +#include "mbed.h" +#include "MAX14661.h" + +MAX14661 mux(D14, D15); +DigitalOut pinRTS(D13); +DigitalIn pinRX(D0); // Set as input to remove load from mbedTX +DigitalIn pinTX(D1); // Set as input to remove load from mbedRX + +int main() +{ + pinRTS=0; // Not Ready to Send + // D0 (mbedTX) + PA2 (TXD) D1 (mbedRX) + PA3 (RXD) + mux.setAB((MAX14661::SW01 | MAX14661::SW13), (MAX14661::SW02 | MAX14661::SW12)); + pinRTS=1; // Ready to Send +} \ No newline at end of file