Library for MAX30101 SpO2 and heart rate sensor
Dependents: HeartRate HeartRate proj final_project_ee119 ... more
MAX30101.h
- Committer:
- j3
- Date:
- 2017-04-13
- Revision:
- 0:2d0c91de9279
- Child:
- 2:0db1f3bec727
File content as of revision 0:2d0c91de9279:
/******************************************************************************* * Copyright (C) 2017 Maxim Integrated Products, Inc., All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Except as contained in this notice, the name of Maxim Integrated * Products, Inc. shall not be used except as stated in the Maxim Integrated * Products, Inc. Branding Policy. * * The mere transfer of this software does not imply any licenses * of trade secrets, proprietary technology, copyrights, patents, * trademarks, maskwork rights, or any other form of intellectual * property whatsoever. Maxim Integrated Products, Inc. retains all * ownership rights. ******************************************************************************* */ #ifndef __MAX30101_H_ #define __MAX30101_H_ #include "mbed.h" /** * Driver for the MAX30101 * * @code * #include "mbed.h" * #include "max32630fthr.h" * #include "MAX30101.h" * * MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3); * * //Get I2C instance * I2C i2cBus(P3_4, P3_5); * * //Get temp sensor instance * MAX30101 op_sensor(i2cBus); //Constructor takes 7-bit slave adrs * * int main(void) * { * //use sensor * } * @endcode */ class MAX30101 { public: ///7-bit slave address static const uint8_t I2C_ADRS = 0x57; ///8-bit write address static const uint8_t I2C_W_ADRS = 0xAE; ///8-bit read address static const uint8_t I2C_R_ADRS = 0xAF; ///MAX30101 Register Map enum Registers_e { InterruptStatus1 = 0x00, InterruptStatus2 = 0x01, InterruptEnable1 = 0x02, InterruptEnable2 = 0x03, FIFO_WritePointer = 0x04, OverflowCounter = 0x05, FIFO_ReadPointer = 0x06, FIFO_DataRegister = 0x07, FIFO_Configuration = 0x08, ModeConfiguration = 0x09, SpO2Configuration = 0x0A, LED1_PA = 0x0C, LED2_PA = 0x0D, LED3_PA = 0x0E, ProxModeLED_PA = 0x10, ModeControlReg1 = 0x11, ModeControlReg2 = 0x12, DieTempInt = 0x1F, DieTempFrac = 0x20, DieTempConfig = 0x21, ProxIntThreshold = 0x30, RevID = 0xFE, PartID = 0xFF }; ///Interrupt Status/Enable BitField union InterruptBitField_u { uint8_t all; struct BitField_s { uint8_t pwr_rdy : 1; ///< Bit0 uint8_t die_temp : 1; ///< Bit1 uint8_t reserved : 2; ///< Bit3:2 uint8_t prox_int : 1; ///< Bit4 uint8_t alc_ovf : 1; ///< Bit5 uint8_t ppg_rdy : 1; ///< Bit6 uint8_t a_full : 1; ///< Bit7 }bits; }; ///FIFO Configuration BitField union FIFO_Configuration_u { uint8_t all; struct BitField_s { uint8_t fifo_a_full : 4; uint8_t fifo_roll_over_en : 1; uint8_t sample_average : 3; }bits; }; ///Mode Configuration BitField union ModeConfiguration_u { uint8_t all; struct BitField_s { uint8_t mode : 3; uint8_t reserved : 3; uint8_t reset : 1; uint8_t shdn : 1; }bits; }; ///SpO2 Configuration BitField union SpO2Configuration_u { uint8_t all; struct BitField_s { uint8_t led_pw : 2; uint8_t spo2_sr : 3; uint8_t spo2_adc_range : 2; uint8_t reserved : 1; }bits; }; ///Multi-LED Mode Control Register BitField union ModeControlReg_u { uint8_t all; struct BitField_s { uint8_t lo_slot : 3; uint8_t reserved1 : 1; uint8_t hi_slot : 3; uint8_t reserved2 : 1; }bits; }; /** * @brief Constructor using I2C PinNames * @param sda - Pinname for sda * @param scl - Pinname for scl */ MAX30101(PinName sda, PinName scl); /** * @brief Constructor using reference to I2C object * @param i2c - Reference to I2C object */ MAX30101(I2C &i2c); /** @brief Destructor */ ~MAX30101(); /** * @brief Writes appropriate bits to Interrupt Enable 1 and 2. * * @param data - Interrupts to enable * @return 0 on success, non 0 otherwise */ int32_t enableInterrupts(const InterruptBitField_u data); /** * @brief Reads interrupt status flags from Interrupt Status 1 and 2. * * @param[out] data - Contains interrupts status flags on success. * @return 0 on success, non 0 otherwise */ int32_t getInterruptStatus(InterruptBitField_u &data); /** * @brief Writes FIFO configuration register with given data * * @param config - FIFO Configuration * @return 0 on success, non 0 otherwise */ int32_t setFIFOConfiguration(const FIFO_Configuration_u config); /** * @brief Reads FIFO configuration register * * @param[out] config - FIFO Configuration on success * @return 0 on success, non 0 otherwise */ int32_t getFIFOConfiguration(FIFO_Configuration_u &config); /** * @brief Writes Mode configuration register with given data * * @param config - Mode Configuration * @return 0 on success, non 0 otherwise */ int32_t setModeConfiguration(const ModeConfiguration_u config); /** * @brief Reads Mode configuration register * * @param[out] config - Mode Configuration on success * @return 0 on success, non 0 otherwise */ int32_t getModeConfiguration(ModeConfiguration_u &config); /** * @brief Writes SpO2 configuration register with given data * * @param config - SpO2 Configuration * @return 0 on success, non 0 otherwise */ int32_t setSpO2Configuration(const SpO2Configuration_u config); /** * @brief Reads SpO2 configuration register * * @param[out] config - SpO2 Configuration on success * @return 0 on success, non 0 otherwise */ int32_t getSpO2Configuration(SpO2Configuration_u &config); /** * @brief Writes LEDx/Prox Pulse Amplitude register with given data * * @param reg - LEDx/Prox Pulse Amplitude register to write * @param amp - LED pulse amplitude * @return 0 on success, non 0 otherwise */ int32_t setLEDPulseAmplitude(Registers_e reg, const uint8_t amp); /** * @brief Reads LEDx/Prox Pulse Amplitude register * * @param reg - LEDx/Prox Pulse Amplitude register to read * @param[out] amp - LED pulse amplitude on success * @return 0 on success, non 0 otherwise */ int32_t getLEDPulseAmplitude(Registers_e reg, uint8_t &); /** * @brief Writes Multi-LED Mode Control Register * * @param reg - Multi-LED Mode Control register 1 or 2 * @param data - Data to write to register * @return 0 on success, non 0 otherwise */ int32_t setMultiLEDModeControl(Registers_e reg, const ModeControlReg_u data); /** * @brief Reads Multi-LED Mode Control Register * * @param reg - Multi-LED Mode Control register 1 or 2 * @param[out] data - Data read from register on success * @return 0 on success, non 0 otherwise */ int32_t getMultiLEDModeControl(Registers_e reg, ModeControlReg_u &data); /** * @brief Gets raw die temperature * * @param[out] data - Raw die temperature on success * * @return 0 on success, non 0 otherwise */ int32_t getDieTemperature(uint16_t &data); /** * @brief Gets die temperature in celsius * * @param[out] data - Die temperature in celsius on success * * @return 0 on success, non 0 otherwise */ int32_t getDieTemperatureC(float &data); /** * @brief Converts celsius to Fahrenheit * * @param c - Temperature in celsius * * @return Temperature in Fahrenheit */ float celsius2fahrenheit(float c); /** * @brief Writes Proximity Interrupt Threshold Register * * @param data - Data to write to register * @return 0 on success, non 0 otherwise */ int32_t setProxIntThreshold(const uint8_t data); /** * @brief Reads Proximity Interrupt Threshold Register * * @param data - Data read on success * @return 0 on success, non 0 otherwise */ int32_t getProxIntThreshold(uint8_t &data); protected: /** * @brief Write register of device * @param reg - Register address * @param value - Value to write * @return 0 on success, non-zero on failure */ int32_t writeRegister(Registers_e reg, uint8_t value); /** * @brief Read register of device * @param reg - Register address * @param[out] value - Read data on success * @return 0 on success, non-zero on failure */ int32_t readRegister(Registers_e reg, uint8_t &value); private: I2C m_i2cBus; }; #endif /* __MAX30101_H_ */