Host software for the MAX30001 ECG, PACE, biopotential, bioimpedance, R-to-R peak sensor. Hosted on the MAX32630FTHR.

Dependencies:   SDFileSystem USBDevice max32630fthr

Fork of MAX30001 SYS EvKit by Emre Eken

MAX30001-MAX32630FTHR ECG Evaluation System

The MAX30001 EVKIT SYS-MBED Evaluation System (EV System) is used to evaluates the MAX30001 sensor, which is an ECG (electrocardiogram), biopotential and bioimpedance analog front end solution for wearable applications. The full evaluation system consists of the MAX32630FTHR board, MAX30001 EVKIT sensor board and the evaluation software. The evaluation kit features ECG, PACE, R-to-R (R-peak timing) detection; bioimpedance (BioZ) AFE; and raw data logging.

The MAX30001 EVKIT evaluation system is assembled, tested and contains the necessary circuitry and connections to evaluate the MAX30001 ECG sensor.

When evaluated as an evaluation system, the MAX32630FTHR board provides the necessary logic rails, master clock, SPI, USB-to-Serial interfaces that are needed to evaluate the MAX30001 sensor board. MAX32630FTHR can be used as an independent development platform.

Communication between the PC and the MAX32630FTHR board is facilitated by a Windows 7, Windows 8 and Windows 10 compatible software that provides a simple and intuitive graphical user interface (GUI).

For more information, visit the wiki pages by clicking the wiki tab above and MAX30001EVSYS product page.

C++ source code, library for the MAX30001 ECG drivers are in the links at the bottom of this page. The sample code includes the ability to log data to the SD card of the MAX32630FTHR.

MAX30001 EVKIT Pinout Connections

/media/uploads/EmreE/max30001_sensor_board_connector_pinout.png

Where to Buy

MAX30001EVSYS-Buy

HSP/RpcServer/Streaming.h

Committer:
Emre.Eken
Date:
2018-07-24
Revision:
13:6031b0bd9773
Parent:
0:8e4630a71eb1

File content as of revision 13:6031b0bd9773:

/*******************************************************************************
 * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
 * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 *
 * Except as contained in this notice, the name of Maxim Integrated
 * Products, Inc. shall not be used except as stated in the Maxim Integrated
 * Products, Inc. Branding Policy.
 *
 * The mere transfer of this software does not imply any licenses
 * of trade secrets, proprietary technology, copyrights, patents,
 * trademarks, maskwork rights, or any other form of intellectual
 * property whatsoever. Maxim Integrated Products, Inc. retains all
 * ownership rights.
 *******************************************************************************
 */
#ifndef _STREAMING_H_
#define _STREAMING_H_

#include "mbed.h"

#define PACKET_LIS2DH 0x20

#define PACKET_MAX30205_TEMP_TOP 0x40
#define PACKET_MAX30205_TEMP_BOTTOM 0x50
#define PACKET_BMP280_PRESSURE 0x60
#define PACKET_LSM6DS3_ACCEL 0x70
#define PACKET_MAX30205_TEMP 0x80
#define PACKET_NOP 0x90

/**
* @brief Creates a packet that will be streamed via USB or saved into flash
* datalog memory
* @brief the packet created will be inserted into a fifo to be streamed at a
* later time
* @param id Streaming ID
* @param buffer Pointer to a uint32 array that contains the data to include in
* the packet
* @param number Number of elements in the buffer
*/
void StreamPacketUint32(uint32_t id, uint32_t *buffer, uint32_t number);
/**
* @brief Insert a buffer into the out going fifo
* @param buffer Array of uint32 to send to the fifo
* @param len Length of the array
*/
int StreamFifoUint32Array(uint32_t buffer[], uint32_t len);
/**
* @brief Insert a timestamp into the out going fifo
*/
int StreamFifoTimeStamp(void);
/**
* @brief Insert a packet id into the out going fifo
* @param id The uint32 packet id
*/
int StreamFifoId(uint32_t id);
/**
* @brief Return a value that indicates if the system is streaming data
* @returns Returns a one or zero value
*/
uint8_t IsStreaming(void);
/**
* @brief Set a flag to indicate if streaming is enabled
* @param state A one or zero value
*/
void SetStreaming(uint8_t state);
/**
* @brief Set a flag to indicate if datalogging is enabled
* @param state A one or zero value
*/
void SetDataLoggingStream(uint8_t state);
/**
* @brief Insert a length value into the out going fifo
* @param length A uint32 number representing a length
*/
int StreamFifoLength(uint32_t length);

#endif // _STREAMING_H_