This is a library for the MAX17055 Li+ Battery Fuel Gauge.
Dependents: Low_Power_Long_Distance_IR_Vision_Robot MAX17055_EZconfig MAX17055_EZconfig_Sample Low_Power_Long_Distance_IR_Vision_Robot
Fork of max17055 by
max17055.h
- Committer:
- fneirab
- Date:
- 2017-09-21
- Revision:
- 1:a031f0c6a71e
- Parent:
- 0:80c39eb8f3ba
- Child:
- 2:ff7db397b70f
File content as of revision 1:a031f0c6a71e:
/******************************************************************************* * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Except as contained in this notice, the name of Maxim Integrated * Products, Inc. shall not be used except as stated in the Maxim Integrated * Products, Inc. Branding Policy. * * The mere transfer of this software does not imply any licenses * of trade secrets, proprietary technology, copyrights, patents, * trademarks, maskwork rights, or any other form of intellectual * property whatsoever. Maxim Integrated Products, Inc. retains all * ownership rights. ********************************************************************************/ #ifndef __MAX17055_H_ #define __MAX17055_H_ // Include #include "mbed.h" /** * @brief Library for the MAX17055\n * The MAX17055 is a low 7μA operating current fuel gauge * which implements Maxim ModelGauge™ m5 EZ algorithm. * ModelGauge m5 EZ makes fuel gauge implementation easy * by eliminating battery characterization requirements * and simplifying host software interaction. * The ModelGauge m5 EZ robust algorithm provides tolerance against * battery diversity for most lithium batteries and applications. * Communication is through an SPI-compatible interface. * * @code * #include "mbed.h" * #include "MAX170155.h" * * * // Hardware serial port * Serial serial(USBTX, USBRX); * * //SPI communications * I2C i2c(SCL, SDA); * * //Fuel Gauge * MAX17055 max17055(i2C, Sutff );//To be completed * * * int main(void) * { * CODE CODE * while(true) * { * CODE CODE * } * } * @endcode */ // Battery struct for all the parameters /******************************************************/ // NOTE:: I PERSONALL THINK BATTERY SHOULD BE A CLASS JUST SO THAT WE CAN KEEP ALL THE PARAMETERS // AS PRIVATE AND PROVIDE USERS WITH CLASS FUNCTIOS TO MODIFY THE PRIVATE VALUE INSIDE /*****************************************************/ typedef struct { int capacity; //!< The rated capacity in mAh of the battery int voltageMax; //!< The maximum voltage in mV that should be used for charging int voltageNom; //!< The normal voltage in mV of the battery near mid charge int voltageMin; //!< The minimum voltage in mV that the battery should be discharged int temperatureMax; //!< The maximum temperature in degrees C where charging is allowed int temperatureMin; //!< The minimum temperature in degrees C where charging is allowed int currentCharge; //!< The current as a percentage of capicity used for charging int currentTerm; //!< The current as a percentage of capacity to stop charging int currentPre; //!< The current as a percentage of capacity for pre-charging } battery_cfg_t; //From Linux driver typedef struct { uint16_t designcap; uint16_t ichgterm; uint16_t vempty; int vcharge; uint16_t learncfg; uint16_t relaxcfg; uint16_t config; uint16_t config2; uint16_t fullsocthr; uint16_t tgain; uint16_t toff; uint16_t curve; uint16_t rcomp0; uint16_t tempco; uint16_t qrtable00; uint16_t qrtable10; uint16_t qrtable20; uint16_t qrtable30; uint16_t dpacc; uint16_t modelcfg; //uint16_t model_data[MAX17055_TABLE_SIZE]; int (*get_charging_status)(void); int model_option; /* * rsense in miliOhms. * default 10 (if rsense = 0) as it is the recommended value by * the datasheet although it can be changed by board designers. */ unsigned int rsense; int volt_min; /* in mV */ int volt_max; /* in mV */ int temp_min; /* in DegreC */ int temp_max; /* in DegreeC */ int soc_max; /* in percent */ int soc_min; /* in percent */ int curr_max; /* in mA */ int curr_min; /* in mA */ } max17055_platform_data; typedef struct { int rcomp0; int temp_co; int full_cap_rep; int cycles; int full_cap_nom; } saved_fuel_gauge_params_t; /// Battery Fuel Gauge Class (MAX17055) /** Generic API for a battery fuel gauge */ class MAX17055 { public: ///7-bit slave address static const uint8_t I2C_ADRS = 0x36; //Slave address 0x6C or 0x36 for 7 MSbit Addres ///8-bit write address static const uint8_t I2C_W_ADRS = 0x6C; ///8-bit read address static const uint8_t I2C_R_ADRS = 0x6D; /////Max # Bytes in FIFO // static const uint16_t MAX_FIFO_BYTES = 288; // ///# of bytes per LED channel // static const uint8_t BYTES_PER_CH = 3; /** * @brief Register Addresses * @details Enumerated max17055 (MAX17055 max17055) */ enum Registers_e { MAX17055_STATUS_REG = 0x00, MAX17055_VALRTTH_REG = 0x01, MAX17055_TALRTTH_REG = 0x02, MAX17055_SALRTTH_REG = 0x03, MAX17055_REPCAP_REG = 0x05, MAX17055_REPSOC_REG = 0x06, MAX17055_TEMP_REG = 0x08, MAX17055_VCELL_REG = 0x09, MAX17055_CURRENT_REG = 0x0A, MAX17055_AVGCURRENT_REG = 0x0B, MAX17055_REMCAP_REG = 0x0F, MAX17055_FULLCAPREP_REG = 0x10, MAX17055_TTE_REG = 0X11, MAX17055_QRTABLE00_REG = 0x12, MAX17055_FULLSOCTHR_REG = 0x13, MAX17055_CYCLES_REG = 0x17, MAX17055_DESIGNCAP_REG = 0x18, MAX17055_AVGVCELL_REG = 0x19, MAX17055_MAXMINVOLT_REG = 0x1B, MAX17055_CONFIG_REG = 0x1D, MAX17055_ICHGTERM_REG = 0x1E, MAX17055_VERSION_REG = 0x21, MAX17055_QRTABLE10_REG = 0x22, MAX17055_FULLCAPNOM_REG = 0x23, MAX17055_LEARNCFG_REG = 0x28, MAX17055_RELAXCFG_REG = 0x2A, MAX17055_TGAIN_REG = 0x2C, MAX17055_TOFF_REG = 0x2D, MAX17055_QRTABLE20_REG = 0x32, MAX17055_RCOMP0_REG = 0x38, MAX17055_TEMPCO_REG = 0x39, MAX17055_VEMPTY_REG = 0x3A, MAX17055_FSTAT_REG = 0x3D, MAX17055_QRTABLE30_REG = 0x42, MAX17055_DQACC_REG = 0x45, MAX17055_DPACC_REG = 0x46, MAX17055_VFSOC0_REG = 0x48, MAX17055_QH0_REG = 0x4C, MAX17055_QH_REG = 0x4D, MAX17055_VFSOC0_QH0_LOCK_REG = 0x60, MAX17055_LOCK1_REG = 0x62, MAX17055_LOCK2_REG = 0x63, MAX17055_MODELDATA_START_REG = 0x80, MAX17055_IALRTTH_REG = 0xB4, MAX17055_CURVE_REG = 0xB9, MAX17055_HIBCFG_REG = 0xBA, MAX17055_CONFIG2_REG = 0xBB, MAX17055_MODELCFG_REG = 0xDB, MAX17055_OCV_REG = 0xFB, MAX17055_VFSOC_REG = 0xFF, } ; /** * @brief max17055 Constructor * @details max17055 Constructor with battery and i2c as parameters */ MAX17055(I2C &i2c); /** * @brief Fuel Gauge Destructor */ ~MAX17055(); //protected: /** * @brief Write Register * @details Writes data to max17055 Register * * @parameters reg_addr Registers to write * reg_data Data to write */ int writeReg(const Registers_e reg_addr, uint16_t reg_data); /** * @brief Read Register * @details Reads data from max17055 register * * @parameters reg_addr Register to read */ int32_t readReg(Registers_e reg_addr, uint16_t &value); /** * \brief Write and Verify a MAX17055 register * \par Details * This function wites and verifies if the writing process was successful * * \param[in] reg_addr - register address * \param[out] reg_data - the variable that contains the data to write * to the register address * * \retval 1 on success * -1 if errors exist */ int write_and_verify_reg(Registers_e reg_addr, uint16_t reg_data); private: I2C &m_i2cBus; // I2C object }; //extern saved_fuel_gauge_params_t default_param; #endif /* _MAX17055_H_ */