![](/media/cache/group/MFR16-new.png.50x50_q85.jpg)
Sweep a servo according to Proximity sensor measure
Dependencies: Servo X_NUCLEO_6180XA1 mbed
Fork of HelloWorld_6180XA1 by
main.cpp
- Committer:
- mapellil
- Date:
- 2015-11-24
- Revision:
- 35:8b4a5cc0fb1f
- Parent:
- 33:b903a0ec8803
- Child:
- 36:0d4aa5b3234d
File content as of revision 35:8b4a5cc0fb1f:
#include "mbed.h" #include "x_nucleo_6180xa1.h" #include <string.h> #include <stdlib.h> #include <stdio.h> #include <assert.h> /* This VL6180X Expansion board test application performs a range measurement and an als measurement in interrupt mode on the onboard embedded top sensor. The board red slider select on the flight the measurement type as ALS or RANGE; the measured data is diplayed on the on bord 4digits display. User Blue button allows to stop current measurement and the entire program releasing all the resources. Reset button is used to restart the program. */ /* Polling operating modes don`t require callback function that handles IRQ Callback IRQ functions are used only for measure that require interrupt */ /* GetMeasurement is asynchronous! It returns NOT_READY if the measurement value is not ready to be read from the corresponding register. So you need to wait for the result to be ready */ #define VL6180X_I2C_SDA I2C_SDA #define VL6180X_I2C_SCL I2C_SCL #define RANGE 0 #define ALS 1 /* timer and digital out pin used for debugging */ //Timer timer; //int start, end; //DigitalOut pin(PA_15); static X_NUCLEO_6180XA1 *board=NULL; MeasureData_t data_sensor_top; OperatingMode operating_mode, prev_operating_mode; /* flags that handle interrupt request */ bool int_sensor_top=false, int_stop_measure=false; /* ISR callback function of the sensor_top */ void SensorTopIRQ(void) { int_sensor_top=true; board->sensor_top->DisableInterruptMeasureDetectionIRQ(); } /* ISR callback function of the user blue button to stop program */ void StopMeasureIRQ(void) { int_stop_measure=true; } /* On board 4 digit local display refresh */ void DisplayRefresh(OperatingMode op_mode) { char str[5]; if(op_mode==range_continuous_interrupt || op_mode==range_continuous_polling) { if(data_sensor_top.range_mm!=0xFFFFFFFF) { sprintf(str,"%d",data_sensor_top.range_mm); } else { sprintf(str,"%s","----"); } } else if(op_mode==als_continuous_interrupt || op_mode==als_continuous_polling) { if(data_sensor_top.lux!=0xFFFFFFFF) { sprintf(str,"%d",data_sensor_top.lux); } else { sprintf(str,"%s","----"); } } board->display->DisplayString(str, strlen(str)); } /* On board red slider position check */ enum OpModeIntPoll_t{ PollMeasure, IntMeasure }; OperatingMode CheckSlider(enum OpModeIntPoll_t OpMode) { OperatingMode ret; int measure= board->RdSwitch(); switch (OpMode) { case PollMeasure: if(measure==RANGE) ret = range_continuous_polling; else if(measure==ALS) ret = als_continuous_polling; break; case IntMeasure: if(measure==RANGE) ret = range_continuous_interrupt; else if(measure==ALS) ret = als_continuous_interrupt; break; } return ret; } /* Print on USB Serial the started OperatingMode */ void PrintStartMessage(OperatingMode op_mode) { if(op_mode==range_continuous_interrupt) printf("\nStarted range continuous interrupt measure\n\r"); else if(prev_operating_mode==als_continuous_interrupt) printf("\nStarted als continuous interrupt measure\n\r"); } /* Print on USB Serial the stopped OperatingMode */ void PrintStopMessage(OperatingMode op_mode) { if(op_mode==range_continuous_interrupt) printf("Stopped range continuous interrupt measure\n\r"); else if(prev_operating_mode==als_continuous_interrupt) printf("Stopped als continuous interrupt measure\n\r"); } /* Print on board 4 Digit display the indicated message <= 4 char */ #define DELAY 2000 // 2Sec void DisplayMsg(const char * msg) { Timer timer; char str[5]; timer.start(); for(int i=0; i<DELAY; i=timer.read_ms()) { sprintf(str,"%s",msg); board->display->DisplayString(str, strlen(str)); } timer.stop(); } void IntContinousALSorRangeMeasure (DevI2C device_i2c) { int status; /* creates the 6180XA1 expansion board singleton obj */ board=X_NUCLEO_6180XA1::Instance(&device_i2c, PB_0, PA_4, PA_5, PA_10); DisplayMsg ("INT"); /* init the 6180XA1 expansion board with default values */ status=board->InitBoard(); if(status) printf("Failed to init board!\n\r"); /* check the red slider position for ALS/Range measure */ operating_mode=CheckSlider(IntMeasure); /* start the measure on sensor top */ status=board->sensor_top->StartMeasurement(operating_mode, SensorTopIRQ, NULL, NULL); if(!status) { prev_operating_mode=operating_mode; PrintStartMessage(operating_mode); while(1) { if(int_sensor_top) /* 6180 isr was triggered */ { int_sensor_top=false; status=board->sensor_top->HandleIRQ(operating_mode, &data_sensor_top); /* handle the isr and read the meaure */ DisplayRefresh(operating_mode); } if(int_stop_measure) /* Blue Button isr was triggered */ { status=board->sensor_top->StopMeasurement(prev_operating_mode); /* stop the measure and exit */ if(!status) PrintStopMessage(prev_operating_mode); int_stop_measure = false; printf("\nProgram stopped!\n\n\r"); break; } operating_mode=CheckSlider(IntMeasure); /* check if red slider was moved */ if(operating_mode!=prev_operating_mode) { DisplayRefresh(prev_operating_mode); status=board->sensor_top->StopMeasurement(prev_operating_mode); /* stop the running measure */ if(!status) PrintStopMessage(prev_operating_mode); prev_operating_mode=operating_mode; status=board->sensor_top->StartMeasurement(operating_mode, SensorTopIRQ, NULL, NULL); /* start the new measure */ if(!status) PrintStartMessage(operating_mode); } else DisplayRefresh(operating_mode); } } DisplayMsg("BYE"); delete board; } /*=================================== Main ================================== Move the VL6180X Expansion board red slider to switch between ALS or Range measures. Press the blue user button to stop the measurements in progress =============================================================================*/ int main() { InterruptIn stop_button (USER_BUTTON); stop_button.rise (&StopMeasureIRQ); DevI2C device_i2c (VL6180X_I2C_SDA, VL6180X_I2C_SCL); IntContinousALSorRangeMeasure (device_i2c); // start continous measures Interrupt based }