![](/media/cache/group/9e3cc099b3b04bca937a1cca1da81b19.jpg.50x50_q85.jpg)
Moet dit er bij
Dependencies: mbed QEI HIDScope biquadFilter MODSERIAL FastPWM
main.cpp
- Committer:
- BasB
- Date:
- 2019-10-29
- Revision:
- 8:3cfc8be293d3
- Parent:
- 7:676a83def149
- Child:
- 9:298469a70280
File content as of revision 8:3cfc8be293d3:
#include "mbed.h" #include "HIDScope.h" #include "QEI.h" #include "MODSERIAL.h" #include "BiQuad.h" #include "FastPWM.h" // Button and potmeter1 control InterruptIn button1(D11); InterruptIn button2(D10); InterruptIn buttonsw2(SW2); InterruptIn buttonsw3(SW3); AnalogIn potmeter1(A0); AnalogIn potmeter2(A1); AnalogIn potmeter3(A2); AnalogIn potmeter4(A3); // Encoder DigitalIn encA1(D9); DigitalIn encB1(D8); DigitalIn encA2(D13); DigitalIn encB2(D13); QEI encoder1(D9,D8,NC,64,QEI::X4_ENCODING); //Encoding motor 1 QEI encoder2(D13,D12,NC,64,QEI::X4_ENCODING); //Encoding motor 2 float Ts = 0.01; //Sample time float motor1angle; //Measured angle motor 1 float motor2angle; //Measured angle motor 2 float motor1offset; //Offset bij calibratie float motor2offset; float potmeter; float omega1; //velocity rad/s motor 1 float omega2; //Velocity rad/s motor2 float deg2rad=0.0174532; //Conversion factor degree to rad float rad2deg=57.29578; //Conversion factor rad to degree // Motor DigitalOut motor2Direction(D4); FastPWM motor2Power(D5); DigitalOut motor1Direction(D7); FastPWM motor1Power(D6); //Motorcontrol bool motordir1; bool motordir2; float motor1ref=0.1745; float motor2ref=0.0873; double controlsignal1; double controlsignal2; double pi2= 6.283185; float motor1error; //motor 1 error float motor2error; float Kp=0.27; float Ki=0.35; float Kd=0.1; float u_p1; float u_p2; float u_i1; float u_i2; //Windup control float ux1; float ux2; float up1; //Proportional contribution motor 1 float up2; //Proportional contribution motor 2 float ek1; float ek2; float ei1= 0.0; //Error integral motor 1 float ei2=0.0; //Error integral motor 2 float Ka= 1.0; //Integral windup gain //RKI float Vx=0.0; //Desired linear velocity x direction float Vy=0.0; //Desired linear velocity y direction float q1=0.0f*deg2rad; //Angle of first joint [rad] float q2=-135.0f*deg2rad; //Angle of second joint [rad] float q1dot; //Velocity of first joint [rad/s] float q2dot; //Velocity of second joint [rad/s] float l1=26.0; //Distance base-link [cm] float l2=62.0; //Distance link-endpoint [cm] float xe; //Endpoint x position [cm] float ye; //Endpoint y position [cm] //Hidscope HIDScope scope(6); //Going to send x channels of data. To access data go to 'http:/localhost:18082/' after starting HIDScope application. //State maschine enum Motor_States{motor_wait , motor_encoderset}; Motor_States motor_curr_state; bool motor_state_changed = true; bool motor_cal1_done = false; bool motor_cal2_done = false; bool button1_pressed = false; bool button2_pressed = false; // PC connection MODSERIAL pc(USBTX, USBRX); // Intializing tickers Ticker motorTicker; Ticker controlTicker; Ticker directionTicker; Ticker encoderTicker; Ticker scopeTicker; Ticker tickGlobal; //Global ticker const float PWM_period = 1e-6; volatile int counts1; // Encoder counts volatile int counts2; volatile int countsPrev1 = 0; volatile int countsPrev2 = 0; volatile int deltaCounts1; volatile int deltaCounts2; float factorin = 6.23185/64; // Convert encoder counts to angle in rad float gearratio = 131.25; // Gear ratio of gearbox void button1Press() { button1_pressed = true; } void button2Press() { button2_pressed = true; } // Ticker Functions void readEncoder() { counts1 = encoder1.getPulses(); deltaCounts1 = counts1 - countsPrev1; countsPrev1 = counts1; counts2 = encoder2.getPulses(); deltaCounts2 = counts2 - countsPrev2; countsPrev2 = counts2; } void do_motor_wait(){ // Entry function if ( motor_state_changed == true ) { motor_state_changed = false; // More functions } // Do nothing until end condition is met // State transition guard if ( button2_pressed ) { button2_pressed = false; motor_curr_state = motor_encoderset; //Beginnen met calibratie motor_state_changed = true; // More functions } } void do_motor_Encoder_Set(){ // Entry function if ( motor_state_changed == true ) { motor_state_changed = false; // More functions } motor1Power.write(0.0f); motor2Power.write(0.0f); motor1offset = (counts1 * factorin / gearratio); motor2offset = (counts2 * factorin / gearratio); // State transition guard if ( button2_pressed ) { button2_pressed = false; motor_curr_state = motor_wait; motor_state_changed = true; } } void motor_state_machine() { switch(motor_curr_state) { case motor_wait: do_motor_wait(); break; case motor_encoderset: do_motor_Encoder_Set(); break; } } // Global loop of program void tickGlobalFunc() { //sampleSignal(); //emg_state_machine(); motor_state_machine(); readEncoder(); // controller(); // outputToMotors(); } int main() { pc.baud(115200); pc.printf("\r\nStarting...\r\n\r\n"); motor1Power.period(PWM_period); motor2Power.period(PWM_period); motor_curr_state = motor_wait; // Start off in EMG Wait state tickGlobal.attach( &tickGlobalFunc, Ts ); button1.fall(&button1Press); button2.fall(&button2Press); while (true) { pc.printf("Omega1: %f Omega 2: %f controlsignal1: %f \r\n", omega1, omega2, controlsignal1); pc.printf("Currentstate: %i\r\n",motor_curr_state); pc.printf("motor1offset: %f motor2offset: %f\r\n",motor1offset,motor2offset); wait(0.5); } }