Lancaster University / BLE_API

Lancaster University's fork of the mbed BLE API. Lives on github, https://github.com/lancaster-university/BLE_API

Dependents:   microbit-dal microbit-dal microbit-ble-open microbit-dal ... more

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@816:2b4f0ef8c06e, 2015-09-29 (annotated)

Committer:
rgrover1
Date:
Tue Sep 29 09:49:22 2015 +0100
Revision:
816:2b4f0ef8c06e
Parent:
815:907530c64cd5
Child:
829:9072de50087b
Synchronized with git rev 4c2aac54

Author: Rohit Grover

Merge branch 'master' into develop

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 710:b2e1a2660ec2 1 /* mbed Microcontroller Library
rgrover1 710:b2e1a2660ec2 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 710:b2e1a2660ec2 3 *
rgrover1 710:b2e1a2660ec2 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 710:b2e1a2660ec2 5 * you may not use this file except in compliance with the License.
rgrover1 710:b2e1a2660ec2 6 * You may obtain a copy of the License at
rgrover1 710:b2e1a2660ec2 7 *
rgrover1 710:b2e1a2660ec2 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 710:b2e1a2660ec2 9 *
rgrover1 710:b2e1a2660ec2 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 710:b2e1a2660ec2 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 710:b2e1a2660ec2 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 710:b2e1a2660ec2 13 * See the License for the specific language governing permissions and
rgrover1 710:b2e1a2660ec2 14 * limitations under the License.
rgrover1 710:b2e1a2660ec2 15 */
rgrover1 710:b2e1a2660ec2 16
rgrover1 710:b2e1a2660ec2 17 #ifndef __GAP_H__
rgrover1 710:b2e1a2660ec2 18 #define __GAP_H__
rgrover1 710:b2e1a2660ec2 19
rgrover1 710:b2e1a2660ec2 20 #include "GapAdvertisingData.h"
rgrover1 710:b2e1a2660ec2 21 #include "GapAdvertisingParams.h"
rgrover1 710:b2e1a2660ec2 22 #include "GapScanningParams.h"
rgrover1 710:b2e1a2660ec2 23 #include "GapEvents.h"
rgrover1 710:b2e1a2660ec2 24 #include "CallChain.h"
rgrover1 710:b2e1a2660ec2 25 #include "FunctionPointerWithContext.h"
rgrover1 710:b2e1a2660ec2 26
rgrover1 710:b2e1a2660ec2 27 using namespace mbed;
rgrover1 710:b2e1a2660ec2 28
rgrover1 710:b2e1a2660ec2 29 /* Forward declarations for classes which will only be used for pointers or references in the following. */
rgrover1 710:b2e1a2660ec2 30 class GapAdvertisingParams;
rgrover1 710:b2e1a2660ec2 31 class GapScanningParams;
rgrover1 710:b2e1a2660ec2 32 class GapAdvertisingData;
rgrover1 710:b2e1a2660ec2 33
rgrover1 710:b2e1a2660ec2 34 class Gap {
rgrover1 710:b2e1a2660ec2 35 public:
rgrover1 710:b2e1a2660ec2 36 enum AddressType_t {
rgrover1 710:b2e1a2660ec2 37 ADDR_TYPE_PUBLIC = 0,
rgrover1 710:b2e1a2660ec2 38 ADDR_TYPE_RANDOM_STATIC,
rgrover1 710:b2e1a2660ec2 39 ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE,
rgrover1 710:b2e1a2660ec2 40 ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE
rgrover1 710:b2e1a2660ec2 41 };
rgrover1 710:b2e1a2660ec2 42 typedef enum AddressType_t addr_type_t; /* @Note: deprecated. Use AddressType_t instead. */
rgrover1 710:b2e1a2660ec2 43
rgrover1 710:b2e1a2660ec2 44 static const unsigned ADDR_LEN = 6;
rgrover1 710:b2e1a2660ec2 45 typedef uint8_t Address_t[ADDR_LEN]; /* 48-bit address, LSB format. */
rgrover1 710:b2e1a2660ec2 46 typedef Address_t address_t; /* @Note: deprecated. Use Address_t instead. */
rgrover1 710:b2e1a2660ec2 47
rgrover1 710:b2e1a2660ec2 48 enum TimeoutSource_t {
rgrover1 710:b2e1a2660ec2 49 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
rgrover1 710:b2e1a2660ec2 50 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
rgrover1 710:b2e1a2660ec2 51 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
rgrover1 710:b2e1a2660ec2 52 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
rgrover1 710:b2e1a2660ec2 53 };
rgrover1 710:b2e1a2660ec2 54
rgrover1 710:b2e1a2660ec2 55 /**
rgrover1 710:b2e1a2660ec2 56 * Enumeration for disconnection reasons. The values for these reasons are
rgrover1 710:b2e1a2660ec2 57 * derived from Nordic's implementation; but the reasons are meant to be
rgrover1 710:b2e1a2660ec2 58 * independent of the transport. If you are returned a reason which is not
rgrover1 710:b2e1a2660ec2 59 * covered by this enumeration, then please refer to the underlying
rgrover1 710:b2e1a2660ec2 60 * transport library.
rgrover1 710:b2e1a2660ec2 61 */
rgrover1 710:b2e1a2660ec2 62 enum DisconnectionReason_t {
rgrover1 710:b2e1a2660ec2 63 CONNECTION_TIMEOUT = 0x08,
rgrover1 710:b2e1a2660ec2 64 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
rgrover1 710:b2e1a2660ec2 65 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote Device Terminated Connection due to low resources.*/
rgrover1 710:b2e1a2660ec2 66 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote Device Terminated Connection due to power off. */
rgrover1 710:b2e1a2660ec2 67 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1 710:b2e1a2660ec2 68 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1 710:b2e1a2660ec2 69 };
rgrover1 710:b2e1a2660ec2 70
rgrover1 710:b2e1a2660ec2 71 /* Describes the current state of the device (more than one bit can be set) */
rgrover1 710:b2e1a2660ec2 72 struct GapState_t {
rgrover1 710:b2e1a2660ec2 73 unsigned advertising : 1; /**< peripheral is currently advertising */
rgrover1 710:b2e1a2660ec2 74 unsigned connected : 1; /**< peripheral is connected to a central */
rgrover1 710:b2e1a2660ec2 75 };
rgrover1 710:b2e1a2660ec2 76
rgrover1 710:b2e1a2660ec2 77 typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1 710:b2e1a2660ec2 78
rgrover1 710:b2e1a2660ec2 79 typedef struct {
rgrover1 710:b2e1a2660ec2 80 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 81 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 82 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 83 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 84 } ConnectionParams_t;
rgrover1 710:b2e1a2660ec2 85
rgrover1 710:b2e1a2660ec2 86 enum Role_t {
rgrover1 710:b2e1a2660ec2 87 PERIPHERAL = 0x1, /**< Peripheral Role. */
rgrover1 710:b2e1a2660ec2 88 CENTRAL = 0x2, /**< Central Role. */
rgrover1 710:b2e1a2660ec2 89 };
rgrover1 710:b2e1a2660ec2 90
rgrover1 710:b2e1a2660ec2 91 struct AdvertisementCallbackParams_t {
rgrover1 710:b2e1a2660ec2 92 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 93 int8_t rssi;
rgrover1 710:b2e1a2660ec2 94 bool isScanResponse;
rgrover1 710:b2e1a2660ec2 95 GapAdvertisingParams::AdvertisingType_t type;
rgrover1 710:b2e1a2660ec2 96 uint8_t advertisingDataLen;
rgrover1 710:b2e1a2660ec2 97 const uint8_t *advertisingData;
rgrover1 710:b2e1a2660ec2 98 };
rgrover1 710:b2e1a2660ec2 99 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1 710:b2e1a2660ec2 100
rgrover1 710:b2e1a2660ec2 101 struct ConnectionCallbackParams_t {
rgrover1 710:b2e1a2660ec2 102 Handle_t handle;
rgrover1 710:b2e1a2660ec2 103 Role_t role;
rgrover1 710:b2e1a2660ec2 104 AddressType_t peerAddrType;
rgrover1 710:b2e1a2660ec2 105 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 106 AddressType_t ownAddrType;
rgrover1 710:b2e1a2660ec2 107 Address_t ownAddr;
rgrover1 710:b2e1a2660ec2 108 const ConnectionParams_t *connectionParams;
rgrover1 710:b2e1a2660ec2 109
rgrover1 710:b2e1a2660ec2 110 ConnectionCallbackParams_t(Handle_t handleIn,
rgrover1 710:b2e1a2660ec2 111 Role_t roleIn,
rgrover1 710:b2e1a2660ec2 112 AddressType_t peerAddrTypeIn,
rgrover1 710:b2e1a2660ec2 113 const uint8_t *peerAddrIn,
rgrover1 710:b2e1a2660ec2 114 AddressType_t ownAddrTypeIn,
rgrover1 710:b2e1a2660ec2 115 const uint8_t *ownAddrIn,
rgrover1 710:b2e1a2660ec2 116 const ConnectionParams_t *connectionParamsIn) :
rgrover1 710:b2e1a2660ec2 117 handle(handleIn),
rgrover1 710:b2e1a2660ec2 118 role(roleIn),
rgrover1 710:b2e1a2660ec2 119 peerAddrType(peerAddrTypeIn),
rgrover1 710:b2e1a2660ec2 120 peerAddr(),
rgrover1 710:b2e1a2660ec2 121 ownAddrType(ownAddrTypeIn),
rgrover1 710:b2e1a2660ec2 122 ownAddr(),
rgrover1 710:b2e1a2660ec2 123 connectionParams(connectionParamsIn) {
rgrover1 710:b2e1a2660ec2 124 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 125 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 126 }
rgrover1 710:b2e1a2660ec2 127 };
rgrover1 710:b2e1a2660ec2 128
rgrover1 710:b2e1a2660ec2 129 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
rgrover1 710:b2e1a2660ec2 130 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 131 return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1 710:b2e1a2660ec2 132 }
rgrover1 766:03f1a26f132f 133
rgrover1 710:b2e1a2660ec2 134
rgrover1 710:b2e1a2660ec2 135 typedef void (*TimeoutEventCallback_t)(TimeoutSource_t source);
rgrover1 710:b2e1a2660ec2 136 typedef void (*ConnectionEventCallback_t)(const ConnectionCallbackParams_t *params);
rgrover1 710:b2e1a2660ec2 137 typedef void (*DisconnectionEventCallback_t)(Handle_t, DisconnectionReason_t);
rgrover1 753:0f60274cd3ad 138 typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
rgrover1 710:b2e1a2660ec2 139
rgrover1 710:b2e1a2660ec2 140 /*
rgrover1 710:b2e1a2660ec2 141 * The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1 710:b2e1a2660ec2 142 */
rgrover1 710:b2e1a2660ec2 143 public:
rgrover1 710:b2e1a2660ec2 144 /**
rgrover1 710:b2e1a2660ec2 145 * Set the BTLE MAC address and type. Please note that the address format is
rgrover1 710:b2e1a2660ec2 146 * LSB (least significant byte first). Please refer to Address_t.
rgrover1 710:b2e1a2660ec2 147 *
rgrover1 710:b2e1a2660ec2 148 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 149 */
rgrover1 710:b2e1a2660ec2 150 virtual ble_error_t setAddress(AddressType_t type, const Address_t address) {
rgrover1 734:4872b70437ce 151 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 152 (void)type;
rgrover1 734:4872b70437ce 153 (void)address;
rgrover1 734:4872b70437ce 154
rgrover1 728:997ba5e7b3b6 155 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 156 }
rgrover1 710:b2e1a2660ec2 157
rgrover1 710:b2e1a2660ec2 158 /**
rgrover1 710:b2e1a2660ec2 159 * Fetch the BTLE MAC address and type.
rgrover1 710:b2e1a2660ec2 160 *
rgrover1 710:b2e1a2660ec2 161 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 162 */
rgrover1 710:b2e1a2660ec2 163 virtual ble_error_t getAddress(AddressType_t *typeP, Address_t address) {
rgrover1 734:4872b70437ce 164 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 165 (void)typeP;
rgrover1 734:4872b70437ce 166 (void)address;
rgrover1 734:4872b70437ce 167
rgrover1 728:997ba5e7b3b6 168 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 169 }
rgrover1 710:b2e1a2660ec2 170
rgrover1 710:b2e1a2660ec2 171 /**
rgrover1 710:b2e1a2660ec2 172 * @return Minimum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 173 */
rgrover1 710:b2e1a2660ec2 174 virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 175 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 176 }
rgrover1 710:b2e1a2660ec2 177
rgrover1 710:b2e1a2660ec2 178 /**
rgrover1 710:b2e1a2660ec2 179 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1 710:b2e1a2660ec2 180 */
rgrover1 710:b2e1a2660ec2 181 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 182 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 183 }
rgrover1 710:b2e1a2660ec2 184
rgrover1 710:b2e1a2660ec2 185 /**
rgrover1 710:b2e1a2660ec2 186 * @return Maximum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 187 */
rgrover1 710:b2e1a2660ec2 188 virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 189 return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 190 }
rgrover1 710:b2e1a2660ec2 191
rgrover1 710:b2e1a2660ec2 192 virtual ble_error_t stopAdvertising(void) {
rgrover1 728:997ba5e7b3b6 193 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 194 }
rgrover1 710:b2e1a2660ec2 195
rgrover1 710:b2e1a2660ec2 196 /**
rgrover1 710:b2e1a2660ec2 197 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 710:b2e1a2660ec2 198 *
rgrover1 710:b2e1a2660ec2 199 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 710:b2e1a2660ec2 200 */
rgrover1 710:b2e1a2660ec2 201 virtual ble_error_t stopScan() {
rgrover1 728:997ba5e7b3b6 202 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 203 }
rgrover1 710:b2e1a2660ec2 204
rgrover1 710:b2e1a2660ec2 205 /**
rgrover1 710:b2e1a2660ec2 206 * Create a connection (GAP Link Establishment).
rgrover1 710:b2e1a2660ec2 207 *
rgrover1 710:b2e1a2660ec2 208 * @param peerAddr
rgrover1 710:b2e1a2660ec2 209 * 48-bit address, LSB format.
rgrover1 710:b2e1a2660ec2 210 * @param peerAddrType
rgrover1 710:b2e1a2660ec2 211 * Address type of the peer.
rgrover1 710:b2e1a2660ec2 212 * @param connectionParams
rgrover1 710:b2e1a2660ec2 213 * Connection parameters.
rgrover1 710:b2e1a2660ec2 214 * @param scanParams
rgrover1 710:b2e1a2660ec2 215 * Paramters to be used while scanning for the peer.
rgrover1 710:b2e1a2660ec2 216 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 710:b2e1a2660ec2 217 * successfully. The connectionCallback (if set) will be invoked upon
rgrover1 710:b2e1a2660ec2 218 * a connection event.
rgrover1 710:b2e1a2660ec2 219 */
rgrover1 710:b2e1a2660ec2 220 virtual ble_error_t connect(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 221 Gap::AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 222 const ConnectionParams_t *connectionParams,
rgrover1 710:b2e1a2660ec2 223 const GapScanningParams *scanParams) {
rgrover1 734:4872b70437ce 224 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 225 (void)peerAddr;
rgrover1 734:4872b70437ce 226 (void)peerAddrType;
rgrover1 734:4872b70437ce 227 (void)connectionParams;
rgrover1 734:4872b70437ce 228 (void)scanParams;
rgrover1 734:4872b70437ce 229
rgrover1 728:997ba5e7b3b6 230 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 231 }
rgrover1 710:b2e1a2660ec2 232
rgrover1 710:b2e1a2660ec2 233 /**
rgrover1 710:b2e1a2660ec2 234 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 235 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 236 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 237 *
rgrover1 710:b2e1a2660ec2 238 * @param reason
rgrover1 710:b2e1a2660ec2 239 * The reason for disconnection to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 240 */
rgrover1 710:b2e1a2660ec2 241 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 242 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 243 (void)connectionHandle;
rgrover1 734:4872b70437ce 244 (void)reason;
rgrover1 734:4872b70437ce 245
rgrover1 728:997ba5e7b3b6 246 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 247 }
rgrover1 710:b2e1a2660ec2 248
rgrover1 710:b2e1a2660ec2 249 /**
rgrover1 710:b2e1a2660ec2 250 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 251 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 252 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 253 *
rgrover1 710:b2e1a2660ec2 254 * @param reason
rgrover1 710:b2e1a2660ec2 255 * The reason for disconnection to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 256 *
rgrover1 710:b2e1a2660ec2 257 * @note: this version of disconnect() doesn't take a connection handle. It
rgrover1 710:b2e1a2660ec2 258 * will work reliably only for stacks which are limited to a single
rgrover1 710:b2e1a2660ec2 259 * connection. This API should be considered *deprecated* in favour of the
rgrover1 710:b2e1a2660ec2 260 * altertive which takes a connection handle. It will be dropped in the future.
rgrover1 710:b2e1a2660ec2 261 */
rgrover1 710:b2e1a2660ec2 262 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 263 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 264 (void)reason;
rgrover1 734:4872b70437ce 265
rgrover1 728:997ba5e7b3b6 266 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 267 }
rgrover1 710:b2e1a2660ec2 268
rgrover1 710:b2e1a2660ec2 269 /**
rgrover1 710:b2e1a2660ec2 270 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 271 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 272 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 273 *
rgrover1 710:b2e1a2660ec2 274 * @param[out] params
rgrover1 710:b2e1a2660ec2 275 * The structure where the parameters will be stored. Memory
rgrover1 710:b2e1a2660ec2 276 * for this is owned by the caller.
rgrover1 710:b2e1a2660ec2 277 *
rgrover1 710:b2e1a2660ec2 278 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 710:b2e1a2660ec2 279 * the given structure pointed to by params.
rgrover1 710:b2e1a2660ec2 280 */
rgrover1 710:b2e1a2660ec2 281 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 282 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 283 (void)params;
rgrover1 734:4872b70437ce 284
rgrover1 728:997ba5e7b3b6 285 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 286 }
rgrover1 710:b2e1a2660ec2 287
rgrover1 710:b2e1a2660ec2 288 /**
rgrover1 710:b2e1a2660ec2 289 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 290 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 291 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 292 *
rgrover1 710:b2e1a2660ec2 293 * @param[in] params
rgrover1 710:b2e1a2660ec2 294 * The structure containing the desired parameters.
rgrover1 710:b2e1a2660ec2 295 */
rgrover1 710:b2e1a2660ec2 296 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 297 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 298 (void)params;
rgrover1 734:4872b70437ce 299
rgrover1 728:997ba5e7b3b6 300 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 301 }
rgrover1 710:b2e1a2660ec2 302
rgrover1 710:b2e1a2660ec2 303 /**
rgrover1 816:2b4f0ef8c06e 304 * Update connection parameters.
rgrover1 816:2b4f0ef8c06e 305 * In the central role this will initiate a Link Layer connection parameter update procedure,
rgrover1 816:2b4f0ef8c06e 306 * otherwise in the peripheral role, this will send the corresponding L2CAP request and wait for
rgrover1 816:2b4f0ef8c06e 307 * the central to perform the procedure.
rgrover1 816:2b4f0ef8c06e 308 *
rgrover1 710:b2e1a2660ec2 309 * @param[in] handle
rgrover1 710:b2e1a2660ec2 310 * Connection Handle
rgrover1 710:b2e1a2660ec2 311 * @param[in] params
rgrover1 710:b2e1a2660ec2 312 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 710:b2e1a2660ec2 313 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 710:b2e1a2660ec2 314 */
rgrover1 710:b2e1a2660ec2 315 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 316 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 317 (void)handle;
rgrover1 734:4872b70437ce 318 (void)params;
rgrover1 734:4872b70437ce 319
rgrover1 728:997ba5e7b3b6 320 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 321 }
rgrover1 710:b2e1a2660ec2 322
rgrover1 710:b2e1a2660ec2 323 /**
rgrover1 710:b2e1a2660ec2 324 * Set the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 325 * @param[in] deviceName
rgrover1 710:b2e1a2660ec2 326 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 710:b2e1a2660ec2 327 */
rgrover1 710:b2e1a2660ec2 328 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 734:4872b70437ce 329 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 330 (void)deviceName;
rgrover1 734:4872b70437ce 331
rgrover1 728:997ba5e7b3b6 332 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 333 }
rgrover1 710:b2e1a2660ec2 334
rgrover1 710:b2e1a2660ec2 335 /**
rgrover1 710:b2e1a2660ec2 336 * Get the value of the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 337 * @param[out] deviceName
rgrover1 710:b2e1a2660ec2 338 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 710:b2e1a2660ec2 339 * terminated* string will be placed. Set this
rgrover1 710:b2e1a2660ec2 340 * value to NULL in order to obtain the deviceName-length
rgrover1 710:b2e1a2660ec2 341 * from the 'length' parameter.
rgrover1 710:b2e1a2660ec2 342 *
rgrover1 710:b2e1a2660ec2 343 * @param[in/out] lengthP
rgrover1 710:b2e1a2660ec2 344 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 710:b2e1a2660ec2 345 * (on output) the complete device name length (without the
rgrover1 710:b2e1a2660ec2 346 * null terminator).
rgrover1 710:b2e1a2660ec2 347 *
rgrover1 710:b2e1a2660ec2 348 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 710:b2e1a2660ec2 349 * length will return the complete device name length, and not the
rgrover1 710:b2e1a2660ec2 350 * number of bytes actually returned in deviceName. The application may
rgrover1 710:b2e1a2660ec2 351 * use this information to retry with a suitable buffer size.
rgrover1 710:b2e1a2660ec2 352 */
rgrover1 710:b2e1a2660ec2 353 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 734:4872b70437ce 354 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 355 (void)deviceName;
rgrover1 734:4872b70437ce 356 (void)lengthP;
rgrover1 734:4872b70437ce 357
rgrover1 728:997ba5e7b3b6 358 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 359 }
rgrover1 710:b2e1a2660ec2 360
rgrover1 710:b2e1a2660ec2 361 /**
rgrover1 710:b2e1a2660ec2 362 * Set the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 363 * @param[in] appearance
rgrover1 710:b2e1a2660ec2 364 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 365 */
rgrover1 710:b2e1a2660ec2 366 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 734:4872b70437ce 367 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 368 (void)appearance;
rgrover1 734:4872b70437ce 369
rgrover1 728:997ba5e7b3b6 370 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 371 }
rgrover1 710:b2e1a2660ec2 372
rgrover1 710:b2e1a2660ec2 373 /**
rgrover1 710:b2e1a2660ec2 374 * Get the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 375 * @param[out] appearance
rgrover1 710:b2e1a2660ec2 376 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 377 */
rgrover1 710:b2e1a2660ec2 378 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 734:4872b70437ce 379 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 380 (void)appearanceP;
rgrover1 734:4872b70437ce 381
rgrover1 728:997ba5e7b3b6 382 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 383 }
rgrover1 710:b2e1a2660ec2 384
rgrover1 710:b2e1a2660ec2 385 /**
rgrover1 710:b2e1a2660ec2 386 * Set the radio's transmit power.
rgrover1 710:b2e1a2660ec2 387 * @param[in] txPower Radio transmit power in dBm.
rgrover1 710:b2e1a2660ec2 388 */
rgrover1 710:b2e1a2660ec2 389 virtual ble_error_t setTxPower(int8_t txPower) {
rgrover1 734:4872b70437ce 390 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 391 (void)txPower;
rgrover1 734:4872b70437ce 392
rgrover1 728:997ba5e7b3b6 393 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 394 }
rgrover1 710:b2e1a2660ec2 395
rgrover1 710:b2e1a2660ec2 396 /**
rgrover1 710:b2e1a2660ec2 397 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 710:b2e1a2660ec2 398 *
rgrover1 710:b2e1a2660ec2 399 * @param[out] valueArrayPP
rgrover1 710:b2e1a2660ec2 400 * Out parameter to receive the immutable array of Tx values.
rgrover1 710:b2e1a2660ec2 401 * @param[out] countP
rgrover1 710:b2e1a2660ec2 402 * Out parameter to receive the array's size.
rgrover1 710:b2e1a2660ec2 403 */
rgrover1 710:b2e1a2660ec2 404 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 734:4872b70437ce 405 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 406 (void)valueArrayPP;
rgrover1 734:4872b70437ce 407 (void)countP;
rgrover1 734:4872b70437ce 408
rgrover1 742:861ed7eb186d 409 *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 410 }
rgrover1 710:b2e1a2660ec2 411
rgrover1 710:b2e1a2660ec2 412 protected:
rgrover1 710:b2e1a2660ec2 413 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1 710:b2e1a2660ec2 414 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1 772:b6d27ab66c94 415 (void)scanningParams;
rgrover1 728:997ba5e7b3b6 416 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 417 }
rgrover1 710:b2e1a2660ec2 418
rgrover1 710:b2e1a2660ec2 419 /*
rgrover1 710:b2e1a2660ec2 420 * APIs with non-virtual implementations.
rgrover1 710:b2e1a2660ec2 421 */
rgrover1 710:b2e1a2660ec2 422 public:
rgrover1 710:b2e1a2660ec2 423 /**
rgrover1 710:b2e1a2660ec2 424 * Returns the current GAP state of the device using a bitmask which
rgrover1 710:b2e1a2660ec2 425 * describes whether the device is advertising and/or connected.
rgrover1 710:b2e1a2660ec2 426 */
rgrover1 710:b2e1a2660ec2 427 GapState_t getState(void) const {
rgrover1 710:b2e1a2660ec2 428 return state;
rgrover1 710:b2e1a2660ec2 429 }
rgrover1 710:b2e1a2660ec2 430
rgrover1 710:b2e1a2660ec2 431 /**
rgrover1 710:b2e1a2660ec2 432 * Set the GAP advertising mode to use for this device.
rgrover1 710:b2e1a2660ec2 433 */
rgrover1 710:b2e1a2660ec2 434 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1 710:b2e1a2660ec2 435 _advParams.setAdvertisingType(advType);
rgrover1 710:b2e1a2660ec2 436 }
rgrover1 710:b2e1a2660ec2 437
rgrover1 710:b2e1a2660ec2 438 /**
rgrover1 710:b2e1a2660ec2 439 * @param[in] interval
rgrover1 710:b2e1a2660ec2 440 * Advertising interval in units of milliseconds. Advertising
rgrover1 710:b2e1a2660ec2 441 * is disabled if interval is 0. If interval is smaller than
rgrover1 710:b2e1a2660ec2 442 * the minimum supported value, then the minimum supported
rgrover1 710:b2e1a2660ec2 443 * value is used instead. This minimum value can be discovered
rgrover1 710:b2e1a2660ec2 444 * using getMinAdvertisingInterval().
rgrover1 710:b2e1a2660ec2 445 *
rgrover1 710:b2e1a2660ec2 446 * This field must be set to 0 if connectionMode is equal
rgrover1 710:b2e1a2660ec2 447 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 710:b2e1a2660ec2 448 *
rgrover1 710:b2e1a2660ec2 449 * @note: Decreasing this value will allow central devices to detect a
rgrover1 710:b2e1a2660ec2 450 * peripheral faster at the expense of more power being used by the radio
rgrover1 710:b2e1a2660ec2 451 * due to the higher data transmit rate.
rgrover1 710:b2e1a2660ec2 452 *
rgrover1 710:b2e1a2660ec2 453 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 710:b2e1a2660ec2 454 * You should use the parallel API from Gap directly. A former call to
rgrover1 710:b2e1a2660ec2 455 * ble.setAdvertisingInterval(...) should now be achieved using
rgrover1 710:b2e1a2660ec2 456 * ble.gap().setAdvertisingInterval(...).
rgrover1 710:b2e1a2660ec2 457 *
rgrover1 710:b2e1a2660ec2 458 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 710:b2e1a2660ec2 459 * 'interval' argument. That required an explicit conversion from
rgrover1 710:b2e1a2660ec2 460 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 710:b2e1a2660ec2 461 * no longer required as the new units are milliseconds. Any application
rgrover1 710:b2e1a2660ec2 462 * code depending on the old semantics would need to be updated accordingly.
rgrover1 710:b2e1a2660ec2 463 */
rgrover1 710:b2e1a2660ec2 464 void setAdvertisingInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 465 if (interval == 0) {
rgrover1 710:b2e1a2660ec2 466 stopAdvertising();
rgrover1 710:b2e1a2660ec2 467 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 710:b2e1a2660ec2 468 interval = getMinAdvertisingInterval();
rgrover1 710:b2e1a2660ec2 469 }
rgrover1 786:d6d7087d8377 470 _advParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 471 }
rgrover1 710:b2e1a2660ec2 472
rgrover1 710:b2e1a2660ec2 473 /**
rgrover1 710:b2e1a2660ec2 474 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 475 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 710:b2e1a2660ec2 476 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 710:b2e1a2660ec2 477 */
rgrover1 710:b2e1a2660ec2 478 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 479 _advParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 480 }
rgrover1 710:b2e1a2660ec2 481
rgrover1 710:b2e1a2660ec2 482 /**
rgrover1 710:b2e1a2660ec2 483 * Start advertising.
rgrover1 710:b2e1a2660ec2 484 */
rgrover1 710:b2e1a2660ec2 485 ble_error_t startAdvertising(void) {
rgrover1 710:b2e1a2660ec2 486 setAdvertisingData(); /* update the underlying stack */
rgrover1 710:b2e1a2660ec2 487 return startAdvertising(_advParams);
rgrover1 710:b2e1a2660ec2 488 }
rgrover1 710:b2e1a2660ec2 489
rgrover1 710:b2e1a2660ec2 490 /**
rgrover1 710:b2e1a2660ec2 491 * Reset any advertising payload prepared from prior calls to
rgrover1 710:b2e1a2660ec2 492 * accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1 710:b2e1a2660ec2 493 * initialized adv payload to the underlying stack.
rgrover1 710:b2e1a2660ec2 494 *
rgrover1 710:b2e1a2660ec2 495 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 496 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 497 */
rgrover1 710:b2e1a2660ec2 498 void clearAdvertisingPayload(void) {
rgrover1 710:b2e1a2660ec2 499 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 500 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 501 }
rgrover1 710:b2e1a2660ec2 502
rgrover1 710:b2e1a2660ec2 503 /**
rgrover1 710:b2e1a2660ec2 504 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 505 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 710:b2e1a2660ec2 506 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 710:b2e1a2660ec2 507 * small.
rgrover1 710:b2e1a2660ec2 508 *
rgrover1 710:b2e1a2660ec2 509 * @param[in] flags
rgrover1 710:b2e1a2660ec2 510 * The flags to be added. Please refer to
rgrover1 710:b2e1a2660ec2 511 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 710:b2e1a2660ec2 512 * flags may be specified in combination.
rgrover1 710:b2e1a2660ec2 513 */
rgrover1 710:b2e1a2660ec2 514 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 710:b2e1a2660ec2 515 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 516 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 517 return rc;
rgrover1 710:b2e1a2660ec2 518 }
rgrover1 710:b2e1a2660ec2 519
rgrover1 710:b2e1a2660ec2 520 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 521 }
rgrover1 710:b2e1a2660ec2 522
rgrover1 710:b2e1a2660ec2 523 /**
rgrover1 710:b2e1a2660ec2 524 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 525 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 710:b2e1a2660ec2 526 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 710:b2e1a2660ec2 527 * small.
rgrover1 710:b2e1a2660ec2 528 *
rgrover1 710:b2e1a2660ec2 529 * @param app
rgrover1 710:b2e1a2660ec2 530 * The appearance of the peripheral.
rgrover1 710:b2e1a2660ec2 531 */
rgrover1 710:b2e1a2660ec2 532 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 710:b2e1a2660ec2 533 setAppearance(app);
rgrover1 710:b2e1a2660ec2 534
rgrover1 710:b2e1a2660ec2 535 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 536 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 537 return rc;
rgrover1 710:b2e1a2660ec2 538 }
rgrover1 710:b2e1a2660ec2 539
rgrover1 710:b2e1a2660ec2 540 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 541 }
rgrover1 710:b2e1a2660ec2 542
rgrover1 710:b2e1a2660ec2 543 /**
rgrover1 710:b2e1a2660ec2 544 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 545 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 710:b2e1a2660ec2 546 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 710:b2e1a2660ec2 547 * small.
rgrover1 710:b2e1a2660ec2 548 *
rgrover1 710:b2e1a2660ec2 549 * @param app
rgrover1 764:1e560f0d45e1 550 * The max transmit power to be used by the controller (in dBm).
rgrover1 764:1e560f0d45e1 551 * This is only a hint.
rgrover1 710:b2e1a2660ec2 552 */
rgrover1 710:b2e1a2660ec2 553 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 710:b2e1a2660ec2 554 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 555 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 556 return rc;
rgrover1 710:b2e1a2660ec2 557 }
rgrover1 710:b2e1a2660ec2 558
rgrover1 710:b2e1a2660ec2 559 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 560 }
rgrover1 710:b2e1a2660ec2 561
rgrover1 710:b2e1a2660ec2 562 /**
rgrover1 710:b2e1a2660ec2 563 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 564 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 710:b2e1a2660ec2 565 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 710:b2e1a2660ec2 566 * advertising payload proves to be too small.
rgrover1 710:b2e1a2660ec2 567 *
rgrover1 710:b2e1a2660ec2 568 * @param type The type which describes the variable length data.
rgrover1 710:b2e1a2660ec2 569 * @param data data bytes.
rgrover1 710:b2e1a2660ec2 570 * @param len length of data.
rgrover1 710:b2e1a2660ec2 571 */
rgrover1 710:b2e1a2660ec2 572 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 573 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 710:b2e1a2660ec2 574 setDeviceName(data);
rgrover1 710:b2e1a2660ec2 575 }
rgrover1 710:b2e1a2660ec2 576
rgrover1 710:b2e1a2660ec2 577 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 578 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 579 return rc;
rgrover1 710:b2e1a2660ec2 580 }
rgrover1 710:b2e1a2660ec2 581
rgrover1 710:b2e1a2660ec2 582 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 583 }
rgrover1 710:b2e1a2660ec2 584
rgrover1 710:b2e1a2660ec2 585 /**
rgrover1 765:4cd91998cd48 586 * Update a particular ADV field in the advertising payload (based on
rgrover1 765:4cd91998cd48 587 * matching type and length). Note: the length of the new data must be the
rgrover1 765:4cd91998cd48 588 * same as the old one.
rgrover1 763:36c3e2b1f1ae 589 *
rgrover1 765:4cd91998cd48 590 * @param[in] type The ADV type field which describes the variable length data.
rgrover1 765:4cd91998cd48 591 * @param[in] data data bytes.
rgrover1 765:4cd91998cd48 592 * @param[in] len length of data.
rgrover1 765:4cd91998cd48 593 *
rgrover1 765:4cd91998cd48 594 * @note: If advertisements are enabled, then the update will take effect immediately.
rgrover1 765:4cd91998cd48 595 *
rgrover1 765:4cd91998cd48 596 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
rgrover1 765:4cd91998cd48 597 * a <type, len> match; else an appropriate error.
rgrover1 763:36c3e2b1f1ae 598 */
rgrover1 763:36c3e2b1f1ae 599 ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 763:36c3e2b1f1ae 600 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 763:36c3e2b1f1ae 601 setDeviceName(data);
rgrover1 763:36c3e2b1f1ae 602 }
rgrover1 763:36c3e2b1f1ae 603
rgrover1 763:36c3e2b1f1ae 604 ble_error_t rc;
rgrover1 763:36c3e2b1f1ae 605 if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 763:36c3e2b1f1ae 606 return rc;
rgrover1 763:36c3e2b1f1ae 607 }
rgrover1 763:36c3e2b1f1ae 608
rgrover1 763:36c3e2b1f1ae 609 return setAdvertisingData();
rgrover1 763:36c3e2b1f1ae 610 }
rgrover1 763:36c3e2b1f1ae 611
rgrover1 763:36c3e2b1f1ae 612 /**
rgrover1 710:b2e1a2660ec2 613 * Setup a particular, user-constructed advertisement payload for the
rgrover1 710:b2e1a2660ec2 614 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 710:b2e1a2660ec2 615 * there are other APIs to build an advertisement payload (see above).
rgrover1 710:b2e1a2660ec2 616 */
rgrover1 710:b2e1a2660ec2 617 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1 710:b2e1a2660ec2 618 _advPayload = payload;
rgrover1 710:b2e1a2660ec2 619 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 620 }
rgrover1 710:b2e1a2660ec2 621
rgrover1 710:b2e1a2660ec2 622 /**
rgrover1 710:b2e1a2660ec2 623 * @return Read back advertising data. Useful for storing and
rgrover1 710:b2e1a2660ec2 624 * restoring payload.
rgrover1 710:b2e1a2660ec2 625 */
rgrover1 710:b2e1a2660ec2 626 const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1 710:b2e1a2660ec2 627 return _advPayload;
rgrover1 710:b2e1a2660ec2 628 }
rgrover1 710:b2e1a2660ec2 629
rgrover1 710:b2e1a2660ec2 630 /**
rgrover1 710:b2e1a2660ec2 631 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 632 * scanResponse payload.
rgrover1 710:b2e1a2660ec2 633 *
rgrover1 710:b2e1a2660ec2 634 * @param[in] type The type which describes the variable length data.
rgrover1 710:b2e1a2660ec2 635 * @param[in] data data bytes.
rgrover1 710:b2e1a2660ec2 636 * @param[in] len length of data.
rgrover1 710:b2e1a2660ec2 637 */
rgrover1 710:b2e1a2660ec2 638 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 639 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 640 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 641 return rc;
rgrover1 710:b2e1a2660ec2 642 }
rgrover1 710:b2e1a2660ec2 643
rgrover1 710:b2e1a2660ec2 644 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 645 }
rgrover1 710:b2e1a2660ec2 646
rgrover1 710:b2e1a2660ec2 647 /**
rgrover1 710:b2e1a2660ec2 648 * Reset any scan response prepared from prior calls to
rgrover1 710:b2e1a2660ec2 649 * accumulateScanResponse().
rgrover1 710:b2e1a2660ec2 650 *
rgrover1 710:b2e1a2660ec2 651 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 652 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 653 */
rgrover1 710:b2e1a2660ec2 654 void clearScanResponse(void) {
rgrover1 710:b2e1a2660ec2 655 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 656 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 657 }
rgrover1 710:b2e1a2660ec2 658
rgrover1 710:b2e1a2660ec2 659 /**
rgrover1 710:b2e1a2660ec2 660 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 661 * @param[in] interval
rgrover1 710:b2e1a2660ec2 662 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 663 * @param[in] window
rgrover1 710:b2e1a2660ec2 664 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 665 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 666 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 710:b2e1a2660ec2 667 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 668 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 669 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 670 *
rgrover1 710:b2e1a2660ec2 671 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 672 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 673 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 674 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 675 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 676 * interval.
rgrover1 710:b2e1a2660ec2 677 *
rgrover1 710:b2e1a2660ec2 678 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 679 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 680 *
rgrover1 710:b2e1a2660ec2 681 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 710:b2e1a2660ec2 682 */
rgrover1 710:b2e1a2660ec2 683 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 710:b2e1a2660ec2 684 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 710:b2e1a2660ec2 685 uint16_t timeout = 0,
rgrover1 710:b2e1a2660ec2 686 bool activeScanning = false) {
rgrover1 710:b2e1a2660ec2 687 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 688 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 689 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 690 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1 710:b2e1a2660ec2 691 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 692 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 693 }
rgrover1 710:b2e1a2660ec2 694
rgrover1 710:b2e1a2660ec2 695 return rc;
rgrover1 710:b2e1a2660ec2 696 }
rgrover1 710:b2e1a2660ec2 697
rgrover1 710:b2e1a2660ec2 698 /**
rgrover1 710:b2e1a2660ec2 699 * Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 700 * @param[in] interval
rgrover1 710:b2e1a2660ec2 701 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 702 *
rgrover1 710:b2e1a2660ec2 703 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 704 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 705 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 706 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 707 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 708 * interval.
rgrover1 710:b2e1a2660ec2 709 *
rgrover1 710:b2e1a2660ec2 710 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 711 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 712 */
rgrover1 710:b2e1a2660ec2 713 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 714 return _scanningParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 715 }
rgrover1 710:b2e1a2660ec2 716
rgrover1 710:b2e1a2660ec2 717 /**
rgrover1 710:b2e1a2660ec2 718 * Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 719 * @param[in] window
rgrover1 710:b2e1a2660ec2 720 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 721 *
rgrover1 710:b2e1a2660ec2 722 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 723 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 724 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 725 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 726 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 727 * interval.
rgrover1 710:b2e1a2660ec2 728 *
rgrover1 710:b2e1a2660ec2 729 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 730 * enabled by using startScan().
rgrover1 770:079b714e9c1a 731 *
rgrover1 770:079b714e9c1a 732 * If scanning is already active, the updated value of scanWindow will be
rgrover1 770:079b714e9c1a 733 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 734 */
rgrover1 710:b2e1a2660ec2 735 ble_error_t setScanWindow(uint16_t window) {
rgrover1 770:079b714e9c1a 736 ble_error_t rc;
rgrover1 770:079b714e9c1a 737 if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 738 return rc;
rgrover1 770:079b714e9c1a 739 }
rgrover1 770:079b714e9c1a 740
rgrover1 770:079b714e9c1a 741 /* If scanning is already active, propagate the new setting to the stack. */
rgrover1 770:079b714e9c1a 742 if (scanningActive) {
rgrover1 770:079b714e9c1a 743 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 744 }
rgrover1 770:079b714e9c1a 745
rgrover1 770:079b714e9c1a 746 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 747 }
rgrover1 710:b2e1a2660ec2 748
rgrover1 710:b2e1a2660ec2 749 /**
rgrover1 710:b2e1a2660ec2 750 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 751 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 752 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 710:b2e1a2660ec2 753 *
rgrover1 710:b2e1a2660ec2 754 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 755 * enabled by using startScan().
rgrover1 770:079b714e9c1a 756 *
rgrover1 770:079b714e9c1a 757 * If scanning is already active, the updated value of scanTimeout will be
rgrover1 770:079b714e9c1a 758 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 759 */
rgrover1 710:b2e1a2660ec2 760 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 770:079b714e9c1a 761 ble_error_t rc;
rgrover1 770:079b714e9c1a 762 if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 763 return rc;
rgrover1 770:079b714e9c1a 764 }
rgrover1 770:079b714e9c1a 765
rgrover1 770:079b714e9c1a 766 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 767 if (scanningActive) {
rgrover1 770:079b714e9c1a 768 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 769 }
rgrover1 770:079b714e9c1a 770
rgrover1 770:079b714e9c1a 771 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 772 }
rgrover1 710:b2e1a2660ec2 773
rgrover1 710:b2e1a2660ec2 774 /**
rgrover1 710:b2e1a2660ec2 775 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 776 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 777 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 778 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 779 *
rgrover1 710:b2e1a2660ec2 780 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 781 * enabled by using startScan().
rgrover1 770:079b714e9c1a 782 *
rgrover1 770:079b714e9c1a 783 * If scanning is already in progress, then active-scanning will be enabled
rgrover1 770:079b714e9c1a 784 * for the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 785 */
rgrover1 770:079b714e9c1a 786 ble_error_t setActiveScanning(bool activeScanning) {
rgrover1 710:b2e1a2660ec2 787 _scanningParams.setActiveScanning(activeScanning);
rgrover1 770:079b714e9c1a 788
rgrover1 770:079b714e9c1a 789 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 790 if (scanningActive) {
rgrover1 770:079b714e9c1a 791 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 792 }
rgrover1 770:079b714e9c1a 793
rgrover1 770:079b714e9c1a 794 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 795 }
rgrover1 710:b2e1a2660ec2 796
rgrover1 710:b2e1a2660ec2 797 /**
rgrover1 710:b2e1a2660ec2 798 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 710:b2e1a2660ec2 799 * effect.
rgrover1 710:b2e1a2660ec2 800 *
rgrover1 710:b2e1a2660ec2 801 * @param[in] callback
rgrover1 710:b2e1a2660ec2 802 * The application specific callback to be invoked upon
rgrover1 710:b2e1a2660ec2 803 * receiving every advertisement report. This can be passed in
rgrover1 710:b2e1a2660ec2 804 * as NULL, in which case scanning may not be enabled at all.
rgrover1 710:b2e1a2660ec2 805 */
rgrover1 710:b2e1a2660ec2 806 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 807 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 808 if (callback) {
rgrover1 710:b2e1a2660ec2 809 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 810 scanningActive = true;
rgrover1 710:b2e1a2660ec2 811 onAdvertisementReport.attach(callback);
rgrover1 710:b2e1a2660ec2 812 }
rgrover1 710:b2e1a2660ec2 813 }
rgrover1 710:b2e1a2660ec2 814
rgrover1 710:b2e1a2660ec2 815 return err;
rgrover1 710:b2e1a2660ec2 816 }
rgrover1 710:b2e1a2660ec2 817
rgrover1 710:b2e1a2660ec2 818 /**
rgrover1 710:b2e1a2660ec2 819 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 710:b2e1a2660ec2 820 */
rgrover1 710:b2e1a2660ec2 821 template<typename T>
rgrover1 710:b2e1a2660ec2 822 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 823 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 824 if (object && callbackMember) {
rgrover1 710:b2e1a2660ec2 825 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 826 scanningActive = true;
rgrover1 710:b2e1a2660ec2 827 onAdvertisementReport.attach(object, callbackMember);
rgrover1 710:b2e1a2660ec2 828 }
rgrover1 710:b2e1a2660ec2 829 }
rgrover1 710:b2e1a2660ec2 830
rgrover1 710:b2e1a2660ec2 831 return err;
rgrover1 710:b2e1a2660ec2 832 }
rgrover1 710:b2e1a2660ec2 833
rgrover1 753:0f60274cd3ad 834 /**
rgrover1 753:0f60274cd3ad 835 * Initialize radio-notification events to be generated from the stack.
rgrover1 753:0f60274cd3ad 836 * This API doesn't need to be called directly;
rgrover1 753:0f60274cd3ad 837 *
rgrover1 753:0f60274cd3ad 838 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 753:0f60274cd3ad 839 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 840 * radio is in use.
rgrover1 753:0f60274cd3ad 841 *
rgrover1 753:0f60274cd3ad 842 * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1 753:0f60274cd3ad 843 * signal is sent at the end of the Radio Event. These signals can be used
rgrover1 753:0f60274cd3ad 844 * by the application programmer to synchronize application logic with radio
rgrover1 753:0f60274cd3ad 845 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 753:0f60274cd3ad 846 * devices to manage peak current drawn during periods when the radio is on,
rgrover1 753:0f60274cd3ad 847 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 753:0f60274cd3ad 848 *
rgrover1 753:0f60274cd3ad 849 * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
rgrover1 753:0f60274cd3ad 850 */
rgrover1 753:0f60274cd3ad 851 virtual ble_error_t initRadioNotification(void) {
rgrover1 753:0f60274cd3ad 852 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 753:0f60274cd3ad 853 }
rgrover1 753:0f60274cd3ad 854
rgrover1 710:b2e1a2660ec2 855 private:
rgrover1 710:b2e1a2660ec2 856 ble_error_t setAdvertisingData(void) {
rgrover1 710:b2e1a2660ec2 857 return setAdvertisingData(_advPayload, _scanResponse);
rgrover1 710:b2e1a2660ec2 858 }
rgrover1 710:b2e1a2660ec2 859
rgrover1 710:b2e1a2660ec2 860 private:
rgrover1 710:b2e1a2660ec2 861 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &, const GapAdvertisingData &) = 0;
rgrover1 710:b2e1a2660ec2 862 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1 710:b2e1a2660ec2 863
rgrover1 710:b2e1a2660ec2 864 public:
rgrover1 710:b2e1a2660ec2 865 /**
rgrover1 710:b2e1a2660ec2 866 * Accessors to read back currently active advertising params.
rgrover1 710:b2e1a2660ec2 867 */
rgrover1 710:b2e1a2660ec2 868 GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1 710:b2e1a2660ec2 869 return _advParams;
rgrover1 710:b2e1a2660ec2 870 }
rgrover1 710:b2e1a2660ec2 871 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 710:b2e1a2660ec2 872 return _advParams;
rgrover1 710:b2e1a2660ec2 873 }
rgrover1 710:b2e1a2660ec2 874
rgrover1 710:b2e1a2660ec2 875 /**
rgrover1 710:b2e1a2660ec2 876 * Setup a particular, user-constructed set of advertisement parameters for
rgrover1 710:b2e1a2660ec2 877 * the underlying stack. It would be uncommon for this API to be used
rgrover1 710:b2e1a2660ec2 878 * directly; there are other APIs to tweak advertisement parameters
rgrover1 710:b2e1a2660ec2 879 * individually.
rgrover1 710:b2e1a2660ec2 880 */
rgrover1 710:b2e1a2660ec2 881 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1 710:b2e1a2660ec2 882 _advParams = newParams;
rgrover1 710:b2e1a2660ec2 883 }
rgrover1 710:b2e1a2660ec2 884
rgrover1 710:b2e1a2660ec2 885 /* Event callback handlers. */
rgrover1 710:b2e1a2660ec2 886 public:
rgrover1 710:b2e1a2660ec2 887 /**
rgrover1 710:b2e1a2660ec2 888 * Setup a callback for timeout events. Refer to TimeoutSource_t for
rgrover1 710:b2e1a2660ec2 889 * possible event types.
rgrover1 710:b2e1a2660ec2 890 */
rgrover1 710:b2e1a2660ec2 891 void onTimeout(TimeoutEventCallback_t callback) {timeoutCallback = callback;}
rgrover1 710:b2e1a2660ec2 892
rgrover1 710:b2e1a2660ec2 893 /**
rgrover1 710:b2e1a2660ec2 894 * Setup a callback for connection events. Refer to ConnectionEventCallback_t.
rgrover1 710:b2e1a2660ec2 895 */
rgrover1 710:b2e1a2660ec2 896 void onConnection(ConnectionEventCallback_t callback) {connectionCallback = callback;}
rgrover1 710:b2e1a2660ec2 897
rgrover1 710:b2e1a2660ec2 898 /**
rgrover1 710:b2e1a2660ec2 899 * Set the application callback for disconnection events.
rgrover1 710:b2e1a2660ec2 900 * @param callback
rgrover1 710:b2e1a2660ec2 901 * Pointer to the unique callback.
rgrover1 710:b2e1a2660ec2 902 */
rgrover1 710:b2e1a2660ec2 903 void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallback = callback;}
rgrover1 710:b2e1a2660ec2 904
rgrover1 710:b2e1a2660ec2 905 /**
rgrover1 816:2b4f0ef8c06e 906 * Append to a chain of callbacks to be invoked upon connection; these
rgrover1 816:2b4f0ef8c06e 907 * callbacks receive no context and are therefore different from the
rgrover1 816:2b4f0ef8c06e 908 * connectionCallback callback.
rgrover1 816:2b4f0ef8c06e 909 * @param callback
rgrover1 816:2b4f0ef8c06e 910 * function pointer to be invoked upon connection; receives no context.
rgrover1 816:2b4f0ef8c06e 911 */
rgrover1 816:2b4f0ef8c06e 912 template<typename T>
rgrover1 816:2b4f0ef8c06e 913 void addToConnectionCallChain(T *tptr, void (T::*mptr)(void)) {connectionCallChain.add(tptr, mptr);}
rgrover1 816:2b4f0ef8c06e 914
rgrover1 816:2b4f0ef8c06e 915 /**
rgrover1 710:b2e1a2660ec2 916 * Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1 710:b2e1a2660ec2 917 * callbacks receive no context and are therefore different from the
rgrover1 710:b2e1a2660ec2 918 * disconnectionCallback callback.
rgrover1 710:b2e1a2660ec2 919 * @param callback
rgrover1 710:b2e1a2660ec2 920 * function pointer to be invoked upon disconnection; receives no context.
rgrover1 710:b2e1a2660ec2 921 */
rgrover1 710:b2e1a2660ec2 922 template<typename T>
rgrover1 710:b2e1a2660ec2 923 void addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 924
rgrover1 710:b2e1a2660ec2 925 /**
rgrover1 710:b2e1a2660ec2 926 * Set the application callback for radio-notification events.
rgrover1 710:b2e1a2660ec2 927 *
rgrover1 710:b2e1a2660ec2 928 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 710:b2e1a2660ec2 929 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 930 * radio is in use.
rgrover1 710:b2e1a2660ec2 931 *
rgrover1 710:b2e1a2660ec2 932 * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1 710:b2e1a2660ec2 933 * signal is sent at the end of the Radio Event. These signals can be used
rgrover1 710:b2e1a2660ec2 934 * by the application programmer to synchronize application logic with radio
rgrover1 710:b2e1a2660ec2 935 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 710:b2e1a2660ec2 936 * devices to manage peak current drawn during periods when the radio is on,
rgrover1 710:b2e1a2660ec2 937 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 710:b2e1a2660ec2 938 *
rgrover1 710:b2e1a2660ec2 939 * @param callback
rgrover1 710:b2e1a2660ec2 940 * The application handler to be invoked in response to a radio
rgrover1 710:b2e1a2660ec2 941 * ACTIVE/INACTIVE event.
rgrover1 754:9b391fb5c5d7 942 *
rgrover1 754:9b391fb5c5d7 943 * or in the other version:
rgrover1 754:9b391fb5c5d7 944 *
rgrover1 754:9b391fb5c5d7 945 * @param tptr
rgrover1 754:9b391fb5c5d7 946 * Pointer to the object of a class defining the member callback
rgrover1 754:9b391fb5c5d7 947 * function (mptr).
rgrover1 754:9b391fb5c5d7 948 * @param mptr
rgrover1 754:9b391fb5c5d7 949 * The member callback (within the context of an object) to be
rgrover1 754:9b391fb5c5d7 950 * invoked in response to a radio ACTIVE/INACTIVE event.
rgrover1 710:b2e1a2660ec2 951 */
rgrover1 753:0f60274cd3ad 952 void onRadioNotification(void (*callback)(bool param)) {
rgrover1 753:0f60274cd3ad 953 radioNotificationCallback.attach(callback);
rgrover1 753:0f60274cd3ad 954 initRadioNotification();
rgrover1 753:0f60274cd3ad 955 }
rgrover1 753:0f60274cd3ad 956 template <typename T>
rgrover1 753:0f60274cd3ad 957 void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
rgrover1 753:0f60274cd3ad 958 radioNotificationCallback.attach(tptr, mptr);
rgrover1 753:0f60274cd3ad 959 initRadioNotification();
rgrover1 753:0f60274cd3ad 960 }
rgrover1 710:b2e1a2660ec2 961
rgrover1 710:b2e1a2660ec2 962 protected:
rgrover1 710:b2e1a2660ec2 963 Gap() :
rgrover1 710:b2e1a2660ec2 964 _advParams(),
rgrover1 710:b2e1a2660ec2 965 _advPayload(),
rgrover1 710:b2e1a2660ec2 966 _scanningParams(),
rgrover1 710:b2e1a2660ec2 967 _scanResponse(),
rgrover1 710:b2e1a2660ec2 968 state(),
rgrover1 770:079b714e9c1a 969 scanningActive(false),
rgrover1 710:b2e1a2660ec2 970 timeoutCallback(NULL),
rgrover1 710:b2e1a2660ec2 971 connectionCallback(NULL),
rgrover1 710:b2e1a2660ec2 972 disconnectionCallback(NULL),
rgrover1 710:b2e1a2660ec2 973 radioNotificationCallback(),
rgrover1 710:b2e1a2660ec2 974 onAdvertisementReport(),
rgrover1 816:2b4f0ef8c06e 975 connectionCallChain(),
rgrover1 710:b2e1a2660ec2 976 disconnectionCallChain() {
rgrover1 710:b2e1a2660ec2 977 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 978 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 979 }
rgrover1 710:b2e1a2660ec2 980
rgrover1 710:b2e1a2660ec2 981 /* Entry points for the underlying stack to report events back to the user. */
rgrover1 710:b2e1a2660ec2 982 public:
rgrover1 710:b2e1a2660ec2 983 void processConnectionEvent(Handle_t handle,
rgrover1 710:b2e1a2660ec2 984 Role_t role,
rgrover1 710:b2e1a2660ec2 985 AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 986 const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 987 AddressType_t ownAddrType,
rgrover1 710:b2e1a2660ec2 988 const Address_t ownAddr,
rgrover1 710:b2e1a2660ec2 989 const ConnectionParams_t *connectionParams) {
rgrover1 710:b2e1a2660ec2 990 state.connected = 1;
rgrover1 710:b2e1a2660ec2 991 if (connectionCallback) {
rgrover1 710:b2e1a2660ec2 992 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1 710:b2e1a2660ec2 993 connectionCallback(&callbackParams);
rgrover1 710:b2e1a2660ec2 994 }
rgrover1 816:2b4f0ef8c06e 995 connectionCallChain.call();
rgrover1 710:b2e1a2660ec2 996 }
rgrover1 710:b2e1a2660ec2 997
rgrover1 710:b2e1a2660ec2 998 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1 710:b2e1a2660ec2 999 state.connected = 0;
rgrover1 710:b2e1a2660ec2 1000 if (disconnectionCallback) {
rgrover1 710:b2e1a2660ec2 1001 disconnectionCallback(handle, reason);
rgrover1 710:b2e1a2660ec2 1002 }
rgrover1 710:b2e1a2660ec2 1003 disconnectionCallChain.call();
rgrover1 710:b2e1a2660ec2 1004 }
rgrover1 710:b2e1a2660ec2 1005
rgrover1 710:b2e1a2660ec2 1006 void processAdvertisementReport(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 1007 int8_t rssi,
rgrover1 710:b2e1a2660ec2 1008 bool isScanResponse,
rgrover1 710:b2e1a2660ec2 1009 GapAdvertisingParams::AdvertisingType_t type,
rgrover1 710:b2e1a2660ec2 1010 uint8_t advertisingDataLen,
rgrover1 710:b2e1a2660ec2 1011 const uint8_t *advertisingData) {
rgrover1 710:b2e1a2660ec2 1012 AdvertisementCallbackParams_t params;
rgrover1 710:b2e1a2660ec2 1013 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 1014 params.rssi = rssi;
rgrover1 710:b2e1a2660ec2 1015 params.isScanResponse = isScanResponse;
rgrover1 710:b2e1a2660ec2 1016 params.type = type;
rgrover1 710:b2e1a2660ec2 1017 params.advertisingDataLen = advertisingDataLen;
rgrover1 710:b2e1a2660ec2 1018 params.advertisingData = advertisingData;
rgrover1 710:b2e1a2660ec2 1019 onAdvertisementReport.call(&params);
rgrover1 710:b2e1a2660ec2 1020 }
rgrover1 710:b2e1a2660ec2 1021
rgrover1 710:b2e1a2660ec2 1022 void processTimeoutEvent(TimeoutSource_t source) {
rgrover1 710:b2e1a2660ec2 1023 if (timeoutCallback) {
rgrover1 710:b2e1a2660ec2 1024 timeoutCallback(source);
rgrover1 710:b2e1a2660ec2 1025 }
rgrover1 710:b2e1a2660ec2 1026 }
rgrover1 710:b2e1a2660ec2 1027
rgrover1 710:b2e1a2660ec2 1028 protected:
rgrover1 710:b2e1a2660ec2 1029 GapAdvertisingParams _advParams;
rgrover1 710:b2e1a2660ec2 1030 GapAdvertisingData _advPayload;
rgrover1 710:b2e1a2660ec2 1031 GapScanningParams _scanningParams;
rgrover1 710:b2e1a2660ec2 1032 GapAdvertisingData _scanResponse;
rgrover1 710:b2e1a2660ec2 1033
rgrover1 710:b2e1a2660ec2 1034 GapState_t state;
rgrover1 770:079b714e9c1a 1035 bool scanningActive;
rgrover1 710:b2e1a2660ec2 1036
rgrover1 710:b2e1a2660ec2 1037 protected:
rgrover1 710:b2e1a2660ec2 1038 TimeoutEventCallback_t timeoutCallback;
rgrover1 710:b2e1a2660ec2 1039 ConnectionEventCallback_t connectionCallback;
rgrover1 710:b2e1a2660ec2 1040 DisconnectionEventCallback_t disconnectionCallback;
rgrover1 710:b2e1a2660ec2 1041 RadioNotificationEventCallback_t radioNotificationCallback;
rgrover1 710:b2e1a2660ec2 1042 AdvertisementReportCallback_t onAdvertisementReport;
rgrover1 816:2b4f0ef8c06e 1043 CallChain connectionCallChain;
rgrover1 710:b2e1a2660ec2 1044 CallChain disconnectionCallChain;
rgrover1 710:b2e1a2660ec2 1045
rgrover1 710:b2e1a2660ec2 1046 private:
rgrover1 710:b2e1a2660ec2 1047 /* disallow copy and assignment */
rgrover1 710:b2e1a2660ec2 1048 Gap(const Gap &);
rgrover1 710:b2e1a2660ec2 1049 Gap& operator=(const Gap &);
rgrover1 710:b2e1a2660ec2 1050 };
rgrover1 710:b2e1a2660ec2 1051
rgrover1 710:b2e1a2660ec2 1052 #endif // ifndef __GAP_H__