Diff: edge_utils/edge_mgr.cpp

Revision:

0:774324cbc5a6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/edge_utils/edge_mgr.cpp	Fri Mar 02 07:56:09 2018 +0000
@@ -0,0 +1,520 @@
+#include "mbed.h"
+#include "edge_mgr.h"
+#include "af_attributes.h"
+
+#include "edge_time.h"
+#include "edge_pin.h"
+#include "MMA8451Q.h"
+#include "VEML6040.h"
+#include "LM75B.h"
+#include "SMTC502AT.h"
+#include "PSE530.h"
+#include <ILI9341.h>
+#include "Arial12x12.h"
+#include "Arial24x23.h"
+#include "Arial28x28.h"
+
+#include "edge_sensor.h"
+#include "edge_accel.h"
+#include "edge_color.h"
+#include "edge_temp.h"
+#include "edge_pressure.h"
+#include "edge_reset_mgr.h"
+#include "edge_chart.h"
+
+#define MMA8451Q_I2C_ADDRESS 0x1C
+#define VEML6040_I2C_ADDRESS 0x10
+#define LM75B_I2C_ADDRESS    0x48
+#define SO1602A_I2C_ADDRESS  0x3C
+
+#define NUM_MAX_SENSOR 5
+
+uint16_t attr_to_set[] = {
+ATTR_ACCEL_PRESENT,
+ATTR_COLOR0_PRESENT,
+ATTR_COLOR1_PRESENT,
+ATTR_TEMP0_PRESENT,
+ATTR_GAS_PRESENT,
+} ;
+
+uint16_t attr_to_get[] = {
+// accel
+ATTR_ACCEL_ENABLE,
+ATTR_ACCEL_INTERVAL,
+// Color0
+ATTR_COLOR0_ENABLE,
+ATTR_COLOR0_INTERVAL,
+ATTR_COLOR0_ITIME,
+ATTR_COLOR0_PWM_PERIOD,
+ATTR_COLOR0_PWM_TARGET,
+ATTR_COLOR0_PWM_R,
+ATTR_COLOR0_PWM_G,
+ATTR_COLOR0_PWM_B,
+// Color1
+ATTR_COLOR1_ENABLE,
+ATTR_COLOR1_INTERVAL,
+ATTR_COLOR1_ITIME,
+ATTR_COLOR1_PWM_PERIOD,
+ATTR_COLOR1_PWM_TARGET,
+ATTR_COLOR1_PWM_R,
+ATTR_COLOR1_PWM_G,
+ATTR_COLOR1_PWM_B,
+// Temp
+ATTR_TEMP0_INTERVAL,
+ATTR_TEMP0_ENABLE,
+// Gas Pressure
+ATTR_GAS_ENABLE,
+ATTR_GAS_INTERVAL,
+ATTR_GAS_THR_MODE,
+ATTR_GAS_THR_HIGH,
+ATTR_GAS_THR_LOW,
+0 } ;
+
+bool            verbos = true ;
+edge_sensor     *sensor[NUM_MAX_SENSOR] ;
+int             num_sensor   = 0 ;
+
+edge_accel      *accel       = 0 ;
+edge_color      *color[2]    = {0, 0} ;
+edge_temp       *temp        = 0 ;
+edge_pressure   *pressure    = 0 ;
+
+PwmOut          *led[3]      = {0, 0, 0} ;
+uint16_t        pwm[3]       = { 0x5FA2, 0xB09B, 0x83DF } ;
+I2C             *edge_i2c0   = 0 ;
+I2C             *edge_i2c1   = 0 ;
+ILI9341         *display     = 0 ;
+MMA8451Q        *mma8451q    = 0 ;
+VEML6040        *veml6040[2] = { 0, 0 } ;
+LM75B           *lm75b0      = 0 ; /* for temp1 */
+AnalogIn        *an0         = 0 ; /* for temp2 */
+SMTC502AT       *smtc502at0  = 0 ;
+AnalogIn        *an1         = 0 ; /* for temp3 */
+SMTC502AT       *smtc502at1  = 0 ;
+LM75B           *lm75b1      = 0 ; /* for temp4 */
+AnalogIn        *an2         = 0 ; /* for gas pressure */
+PSE530          *pse530      = 0 ; /* gas pressure sensor */
+
+DigitalOut      *tft_reset   = 0 ;
+DigitalOut      *tft_backlight = 0 ;
+DigitalOut      *tft_cs       = 0 ;
+DigitalOut      *pse530_en    = 0 ;
+
+static int error_tolerance   = 100 ;
+static int loop_interval     = 100 ; // 1000 ; 
+static int accel_interval    = 10 ;
+int        edge_mgr_status   = EDGE_MGR_INIT ;
+char       *reset_reason_str = 0 ;
+int        display_mode      = 1 ;
+bool       reboot_requested  = false ;
+
+void init_display(void)
+{
+reset_watch_dog() ;
+    printf("TFT Initializing\n") ;
+    tft_reset = new DigitalOut(PIN_RESET_TFT, 1) ;
+    tft_backlight = new DigitalOut(PIN_BL_TFT, 0) ;
+    tft_cs = new DigitalOut(PIN_CS_TFT, 1) ;
+
+reset_watch_dog() ;
+    display = new ILI9341(SPI_8, 10000000,
+                PIN_MOSI, PIN_MISO, PIN_SCK,
+                PIN_CS_TFT, PIN_RESET_TFT, PIN_DC_TFT, "LaSuno") ;
+
+reset_watch_dog() ;
+    display->BusEnable(true) ;
+    display->set_orientation(1) ;
+    
+reset_watch_dog() ;
+    display->cls() ;
+    *tft_backlight = 1 ;
+    display->BusEnable(false) ;
+    printf("TFT Initialized\n") ;
+}
+
+void   edge_splash(void) 
+{
+    printf("Sensor loop started!\n") ;
+    if (display) {
+        reset_watch_dog() ;
+        display->BusEnable(true) ;
+        display->cls() ;
+        display->foreground(Green) ;
+        display->locate(40, 20) ;
+        display->printf("Sensor Loop") ;
+        display->locate(40, 60) ;
+        display->printf("  Started!") ;
+        display->BusEnable(false) ;
+        reset_watch_dog() ;
+    }
+}
+
+int init_edge_attribute(void)
+{
+    static int sensor_index = 0 ;
+    static int attr_index = 0 ;
+    static int error_count = 0 ;
+    int return_value = 1 ;
+    int result ;
+    
+    reset_watch_dog() ;
+    
+    if (reset_reason_str) { 
+        result = afero->setAttribute(ATTR_MCU_RESET_REASON, reset_reason_str) ;
+        if (result == afSUCCESS) {
+            error_count = 0 ;
+            reset_reason_str = 0 ;
+        } else {
+            error_count++ ;
+        }
+        reset_watch_dog() ;
+    }
+    if (sensor_index < NUM_MAX_SENSOR) {// for each sensor send presence
+// printf("Setting sensor[%d] presence\n", sensor_index) ;
+        if (sensor_index == 3) { /* for temp lm75b0 is used */
+            result = afero->setAttributeBool(attr_to_set[sensor_index], lm75b0) ;
+        } else {
+            result = afero->setAttributeBool(attr_to_set[sensor_index], sensor[sensor_index]) ;
+        }
+        if (result == afSUCCESS) {
+            error_count = 0 ;
+            sensor_index++ ;
+        } else {
+            error_count++ ;
+        }
+        reset_watch_dog() ;
+    } else { // all sensor presence sent, now get attributes
+        if (attr_to_get[attr_index] != 0) {
+// printf("getting attribute [%d]\n", attr_index) ;
+            result = afero->getAttribute(attr_to_get[attr_index]) ;
+            if (result == afSUCCESS) {
+                error_count = 0 ;
+                attr_index++ ;
+            } else {
+                error_count++ ;
+            }
+        }
+        reset_watch_dog() ;
+    }
+    
+    if (error_count > error_tolerance) { // too many fails, trying reset
+        reset_watch_dog() ;
+        reboot_edge() ;
+    }
+ 
+    if ((sensor_index >= NUM_MAX_SENSOR)&&(attr_to_get[attr_index] == 0)) { /* all sensors attributes done */
+        sensor_index = 0 ;
+        attr_index = 0 ;
+        return_value = 0 ;
+    }
+    return(return_value) ;
+}
+
+void edge_loop(uint32_t count_robin)
+{
+    static int sensor_index = 0 ;
+    int result ;
+    
+    reset_watch_dog() ;
+    
+    if ((count_robin % accel_interval) == 0) {
+        if (accel) {
+            accel->accum() ; /* get and accum accel data */
+        }
+        reset_watch_dog() ;
+    }
+
+    if ((count_robin % loop_interval) == 0) {
+        reset_watch_dog() ;
+        loop_interval = 10 ;
+        if ((sensor[sensor_index])&&(sensor[sensor_index]->isEnabled())) {
+            switch(sensor_index) {
+            case SENSOR_ID_COLOR1: /* color0 */
+                if (((edge_color*)sensor[sensor_index])->calibration_requested()) {
+                    ((edge_color*)sensor[sensor_index])->calibrate(color0_target, color0_pwm, 10) ;
+                    reset_watch_dog() ;
+                    while((result = afero->setAttribute32(ATTR_COLOR0_PWM_R, color0_pwm[0])) != afSUCCESS) { 
+                        reset_watch_dog() ;
+                        print_af_error(result) ;
+                        wait_ms(10) ;
+                    }
+                    while((result = afero->setAttribute32(ATTR_COLOR0_PWM_G, color0_pwm[1])) != afSUCCESS) {
+                        reset_watch_dog() ;
+                        print_af_error(result) ;
+                        wait_ms(10) ;
+                    } 
+                    while((result = afero->setAttribute32(ATTR_COLOR0_PWM_B, color0_pwm[2])) != afSUCCESS) {
+                        reset_watch_dog() ;
+                        print_af_error(result) ;
+                        wait_ms(10) ;
+                    }
+                    while((afero->setAttributeBool(ATTR_COLOR0_CALIBRATE, false)) != afSUCCESS) {
+                        reset_watch_dog() ;     
+                        print_af_error(result) ;
+                        wait_ms(10) ;
+                    }
+                } else { 
+                    sensor[sensor_index]->runStateMachine() ;
+                }
+                break ;
+            case SENSOR_ID_COLOR2: /* color1 */
+                if (((edge_color*)sensor[sensor_index])->calibration_requested()) {
+                    ((edge_color*)sensor[sensor_index])->calibrate(color1_target, color1_pwm, 10) ;
+                    reset_watch_dog() ;
+                    if ((result = afero->setAttribute32(ATTR_COLOR1_PWM_R, color1_pwm[0])) != afSUCCESS) {
+                        reset_watch_dog() ;
+                        print_af_error(result) ;
+                        wait_ms(10) ;
+                    }
+                    if ((result = afero->setAttribute32(ATTR_COLOR1_PWM_G, color1_pwm[1])) != afSUCCESS) {
+                        reset_watch_dog() ;
+                        print_af_error(result) ;
+                        wait_ms(10) ;
+                    }
+                    reset_watch_dog() ;
+                    if ((result = afero->setAttribute32(ATTR_COLOR1_PWM_B, color1_pwm[2])) != afSUCCESS) {
+                        reset_watch_dog() ;       
+                        print_af_error(result) ;
+                        wait_ms(10) ;
+                    }
+                    while((afero->setAttributeBool(ATTR_COLOR1_CALIBRATE, false)) != afSUCCESS) {
+                        reset_watch_dog() ;     
+                        print_af_error(result) ;
+                        wait_ms(10) ;
+                    }
+                } else { 
+                    sensor[sensor_index]->runStateMachine() ;
+                }
+                break ;
+            default:
+                sensor[sensor_index]->runStateMachine() ;
+                break ;
+            }
+        }
+        sensor_index = (sensor_index + 1) % NUM_MAX_SENSOR ;
+    }
+    reset_watch_dog() ;
+}
+
+int is_present(I2C *i2c, int address)
+{
+    char t[1] = { 0 } ;
+    char data[2] = { 0, 0 } ;
+    int result ;
+    address <<= 1 ;
+    result = i2c->write(address, t, 1, true) ;
+    if (result == 0) {
+        result = i2c->read(address, data, 2) ;
+    }
+    return((result == 0)) ;    
+}
+
+void init_sensors(void)
+{
+    printf("=== Initializing Sensor(s) ===\n") ;    
+    edge_i2c0 = new I2C(PIN_I2C0_SDA, PIN_I2C0_SCL) ;
+    edge_i2c1 = new I2C(PIN_I2C1_SDA, PIN_I2C1_SCL) ;
+                
+    if (display) {
+reset_watch_dog() ;
+printf("printing inital string to TFT\n") ;
+        display->BusEnable(true) ;
+
+
+    display->background(Black) ;
+    display->foreground(White) ;
+reset_watch_dog() ;
+    display->cls() ;
+reset_watch_dog() ;
+        display->set_font((unsigned char*) Arial24x23);
+        display->foreground(Green) ;
+        display->locate(70, 5) ;
+        display->printf("Suntory") ;
+        display->locate(30, 30) ;
+        display->printf("Server Monitor") ;
+        display->set_font((unsigned char*) Arial28x28);
+        display->foreground(White) ;
+        display->locate(30, 60) ;
+        display->printf("La Suno") ;
+        display->locate(30, 100) ;
+        display->foreground(Red) ;
+        display->printf("Preparing...") ;
+    display->BusEnable(true) ;
+    printf("Done\n") ;
+    wait(0.1) ;
+reset_watch_dog() ;
+    display->cls() ;
+    display->foreground(Yellow) ;
+    display->locate(40, 5) ;
+    display->printf("Probing sensors...") ;
+    display->foreground(Green) ;
+    display->BusEnable(false) ;
+    }
+reset_watch_dog() ;
+    if (is_present(edge_i2c1, MMA8451Q_I2C_ADDRESS)) {
+        printf("MMA8451Q on I2C1 is present\n") ;
+        if (display) {
+            display->BusEnable(true) ;
+            display->locate(30, num_sensor * 30 + 40) ;
+            display->printf("ACCEL is present") ;
+            display->BusEnable(false) ;
+        }
+        mma8451q = new MMA8451Q(edge_i2c1, MMA8451Q_I2C_ADDRESS) ;
+        accel    = new edge_accel(mma8451q) ;
+        sensor[SENSOR_ID_ACCEL] = accel ;
+        sensor[SENSOR_ID_ACCEL]->setId(SENSOR_ID_ACCEL) ;
+        num_sensor++ ;
+    } else {
+        sensor[SENSOR_ID_ACCEL] = 0 ;
+        printf("MMA8451Q is absent\n") ;
+    }
+reset_watch_dog() ;   
+    if (is_present(edge_i2c1, VEML6040_I2C_ADDRESS)) {
+        printf("VEML6040 on I2C1 is present\n") ;  
+        if (display) {
+            display->BusEnable(true) ;
+            display->locate(30, num_sensor * 30 + 40) ;
+            display->printf("COLOR1 is present") ;
+            display->BusEnable(false) ;
+        }  
+        veml6040[0] = new VEML6040(edge_i2c1, VEML6040_I2C_ADDRESS) ;
+        led[0] = new PwmOut(PIN_LED_R) ; 
+        led[1] = new PwmOut(PIN_LED_G) ; 
+        led[2] = new PwmOut(PIN_LED_B) ; 
+        color[0] = new edge_color(veml6040[0], led, pwm) ;
+        sensor[SENSOR_ID_COLOR1] = color[0] ;
+        sensor[SENSOR_ID_COLOR1]->setId(SENSOR_ID_COLOR1) ;
+        num_sensor++ ;
+    } else {
+        sensor[SENSOR_ID_COLOR1] = 0 ;
+        printf("VEML6040 on I2C1 is absent\n") ;
+    }
+reset_watch_dog() ;    
+    if (is_present(edge_i2c0, VEML6040_I2C_ADDRESS)) {
+        printf("VEML6040 on I2C0 is present\n") ;  
+        if (display) {
+            display->BusEnable(true) ;
+            display->locate(30, num_sensor * 30 + 40) ;
+            display->printf("COLOR2 is present") ;
+            display->BusEnable(false) ;
+        }   
+        veml6040[1] = new VEML6040(edge_i2c0, VEML6040_I2C_ADDRESS) ;
+        if (led[0] == 0) {
+            led[0] = new PwmOut(PIN_LED_R) ;
+            led[1] = new PwmOut(PIN_LED_G) ;
+            led[2] = new PwmOut(PIN_LED_B) ;
+        }
+        color[1] = new edge_color(veml6040[1], led, pwm) ;
+        sensor[SENSOR_ID_COLOR2] = color[1] ;
+        sensor[SENSOR_ID_COLOR2]->setId(SENSOR_ID_COLOR2) ;
+        num_sensor++ ;
+    } else {
+        sensor[SENSOR_ID_COLOR2] = 0 ;
+        printf("VEML6040 on I2C0 is absent\n") ;
+    }
+reset_watch_dog() ;    
+    if (is_present(edge_i2c1, LM75B_I2C_ADDRESS)) {
+        printf("LM75B on I2C1 is present\n") ;
+        if (display) {
+            display->BusEnable(true) ;
+            display->locate(30, num_sensor * 30 + 40) ;
+            display->printf("TEMP1 is present") ;
+            display->BusEnable(false) ;
+        }   
+        lm75b0 = new LM75B(edge_i2c1, LM75B_I2C_ADDRESS) ;
+    } else {
+        printf("LM75B on I2C1 is absent\n") ;
+    }
+#if 0    
+    if (is_present(edge_i2c0, LM75B_I2C_ADDRESS)) {
+        printf("LM75B on I2C0 is present\n") ;
+        lm75b1 = new LM75B(edge_i2c0, LM75B_I2C_ADDRESS) ;
+    } else {
+        printf("LM75B on I2C0 is absent\n") ;
+    }
+#endif  
+     if (display) { /* press is present anyway */
+        display->BusEnable(true) ;
+        if (lm75b0) {
+            display->locate(30, (num_sensor+1) * 30 + 40) ;
+        } else {
+            display->locate(30, num_sensor * 30 + 40) ;
+        }
+        display->printf("PRESS is present") ;
+        display->BusEnable(false) ;
+    }  
+reset_watch_dog() ;    
+    an0        = new AnalogIn(PIN_AN0) ;
+    smtc502at0 = new SMTC502AT(an0) ;
+    an1        = new AnalogIn(PIN_AN1) ;
+    smtc502at1 = new SMTC502AT(an1) ;
+    temp       = new edge_temp(lm75b0, smtc502at0, smtc502at1, lm75b1) ;
+    sensor[SENSOR_ID_TEMP]  = temp ;
+    sensor[SENSOR_ID_TEMP]->setId(SENSOR_ID_TEMP) ;
+    num_sensor++ ;
+    
+
+reset_watch_dog() ;    
+    an2        = new AnalogIn(PIN_AN2) ;
+    pse530_en  = new DigitalOut(PIN_PRESS_EN, 0) ;
+    pse530     = new PSE530(an2) ;
+    pressure   = new edge_pressure(pse530, pse530_en) ;
+    sensor[SENSOR_ID_PRESS]  = pressure ;
+    sensor[SENSOR_ID_PRESS]->setId(SENSOR_ID_PRESS) ;
+    num_sensor++ ;
+ 
+reset_watch_dog() ;
+    if (num_sensor > 0) {
+        printf("%d edge_sensor(s) registered\n", num_sensor) ;
+        printf("Edge is waiting for ASR to link\n") ;
+        if (display) {
+            display->BusEnable(true) ;
+            display->foreground(White) ;
+            display->locate(40, 200) ;
+            display->printf("Waiting for ASR") ;
+            display->BusEnable(false) ;
+        }
+    }
+reset_watch_dog() ;
+}
+
+void enable_sensors(void) 
+{
+    int i ;
+    for (i = 0 ; i < NUM_MAX_SENSOR ; i++ ) {
+        if (sensor[i]) {
+            sensor[i]->enable() ;
+        }
+    }
+}
+
+void disable_sensors(void)
+{
+    int i ;
+    for (i = 0 ; i < NUM_MAX_SENSOR ; i++ ) {
+        if (sensor[i]) {
+            sensor[i]->disable() ;
+        }
+    }
+}
+
+void   reboot_edge(void) 
+{
+    int i ;
+    reset_watch_dog() ;
+    disable_sensors() ;
+    reset_watch_dog() ;
+    if (display) {
+        delete display ;
+        display = 0 ;
+    }
+    for (i = 0 ; i < NUM_MAX_SENSOR ; i++ ) {
+        if (sensor[i]) {
+            reset_watch_dog() ;
+            delete sensor[i] ;
+            sensor[i] = 0 ;
+        }
+    }
+    reset_watch_dog() ;
+    software_reset() ;
+}
\ No newline at end of file