LIS2DW12 - LIS2DW12 accelerometer sensor library

LELEC2811 - I&S » Code » LIS2DW12

LIS2DW12 accelerometer sensor library

Dependencies: X_NUCLEO_COMMON ST_INTERFACES

lis2dw12_reg.c@4:94c5d5546161, 2019-07-24 (annotated)

Committer:: cparata
Date:: Wed Jul 24 14:18:07 2019 +0000
Revision:: 4:94c5d5546161
Parent:: 3:111317ba9301

Format with Astyle

Who changed what in which revision?

User	Revision	Line number	New contents of line
cparata	3:111317ba9301	1	/**
cparata	0:dff8803aace7	2	******************************************************************************
cparata	0:dff8803aace7	3	* @file lis2dw12_reg.c
cparata	2:a94816b14e3d	4	* @author Sensors Software Solution Team
cparata	0:dff8803aace7	5	* @brief LIS2DW12 driver file
cparata	0:dff8803aace7	6	******************************************************************************
cparata	0:dff8803aace7	7	* @attention
cparata	0:dff8803aace7	8	*
cparata	0:dff8803aace7	9	* <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2>
cparata	0:dff8803aace7	10	*
cparata	2:a94816b14e3d	11	* Redistribution and use in source and binary forms, with or without
cparata	2:a94816b14e3d	12	* modification, are permitted provided that the following conditions
cparata	2:a94816b14e3d	13	* are met:
cparata	0:dff8803aace7	14	* 1. Redistributions of source code must retain the above copyright notice,
cparata	0:dff8803aace7	15	* this list of conditions and the following disclaimer.
cparata	2:a94816b14e3d	16	* 2. Redistributions in binary form must reproduce the above copyright
cparata	2:a94816b14e3d	17	* notice, this list of conditions and the following disclaimer in the
cparata	2:a94816b14e3d	18	* documentation and/or other materials provided with the distribution.
cparata	2:a94816b14e3d	19	* 3. Neither the name of STMicroelectronics nor the names of its
cparata	2:a94816b14e3d	20	* contributors may be used to endorse or promote products derived from
cparata	2:a94816b14e3d	21	* this software without specific prior written permission.
cparata	0:dff8803aace7	22	*
cparata	0:dff8803aace7	23	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
cparata	0:dff8803aace7	24	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
cparata	2:a94816b14e3d	25	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
cparata	2:a94816b14e3d	26	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
cparata	2:a94816b14e3d	27	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
cparata	2:a94816b14e3d	28	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
cparata	2:a94816b14e3d	29	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
cparata	2:a94816b14e3d	30	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
cparata	2:a94816b14e3d	31	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
cparata	2:a94816b14e3d	32	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
cparata	2:a94816b14e3d	33	* POSSIBILITY OF SUCH DAMAGE.
cparata	0:dff8803aace7	34	*
cparata	3:111317ba9301	35	******************************************************************************
cparata	0:dff8803aace7	36	*/
cparata	0:dff8803aace7	37
cparata	0:dff8803aace7	38	#include "lis2dw12_reg.h"
cparata	0:dff8803aace7	39
cparata	0:dff8803aace7	40	/**
cparata	2:a94816b14e3d	41	* @defgroup LIS2DW12
cparata	2:a94816b14e3d	42	* @brief This file provides a set of functions needed to drive the
cparata	2:a94816b14e3d	43	* lis2dw12 enhanced inertial module.
cparata	0:dff8803aace7	44	* @{
cparata	2:a94816b14e3d	45	*
cparata	0:dff8803aace7	46	*/
cparata	0:dff8803aace7	47
cparata	2:a94816b14e3d	48	/**
cparata	2:a94816b14e3d	49	* @defgroup LIS2DW12_Interfaces_Functions
cparata	2:a94816b14e3d	50	* @brief This section provide a set of functions used to read and
cparata	2:a94816b14e3d	51	* write a generic register of the device.
cparata	2:a94816b14e3d	52	* MANDATORY: return 0 -> no Error.
cparata	0:dff8803aace7	53	* @{
cparata	2:a94816b14e3d	54	*
cparata	0:dff8803aace7	55	*/
cparata	0:dff8803aace7	56
cparata	0:dff8803aace7	57	/**
cparata	0:dff8803aace7	58	* @brief Read generic device register
cparata	2:a94816b14e3d	59	*
cparata	2:a94816b14e3d	60	* @param ctx read / write interface definitions(ptr)
cparata	2:a94816b14e3d	61	* @param reg register to read
cparata	2:a94816b14e3d	62	* @param data pointer to buffer that store the data read(ptr)
cparata	2:a94816b14e3d	63	* @param len number of consecutive register to read
cparata	2:a94816b14e3d	64	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	65	*
cparata	0:dff8803aace7	66	*/
cparata	4:94c5d5546161	67	int32_t lis2dw12_read_reg(lis2dw12_ctx_t ctx, uint8_t reg, uint8_t data,
cparata	0:dff8803aace7	68	uint16_t len)
cparata	0:dff8803aace7	69	{
cparata	4:94c5d5546161	70	int32_t ret;
cparata	4:94c5d5546161	71	ret = ctx->read_reg(ctx->handle, reg, data, len);
cparata	4:94c5d5546161	72	return ret;
cparata	0:dff8803aace7	73	}
cparata	0:dff8803aace7	74
cparata	0:dff8803aace7	75	/**
cparata	0:dff8803aace7	76	* @brief Write generic device register
cparata	0:dff8803aace7	77	*
cparata	2:a94816b14e3d	78	* @param ctx read / write interface definitions(ptr)
cparata	2:a94816b14e3d	79	* @param reg register to write
cparata	2:a94816b14e3d	80	* @param data pointer to data to write in register reg(ptr)
cparata	2:a94816b14e3d	81	* @param len number of consecutive register to write
cparata	2:a94816b14e3d	82	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	2:a94816b14e3d	83	*
cparata	2:a94816b14e3d	84	*/
cparata	4:94c5d5546161	85	int32_t lis2dw12_write_reg(lis2dw12_ctx_t ctx, uint8_t reg, uint8_t data,
cparata	0:dff8803aace7	86	uint16_t len)
cparata	0:dff8803aace7	87	{
cparata	4:94c5d5546161	88	int32_t ret;
cparata	4:94c5d5546161	89	ret = ctx->write_reg(ctx->handle, reg, data, len);
cparata	4:94c5d5546161	90	return ret;
cparata	0:dff8803aace7	91	}
cparata	0:dff8803aace7	92
cparata	0:dff8803aace7	93	/**
cparata	0:dff8803aace7	94	* @}
cparata	2:a94816b14e3d	95	*
cparata	2:a94816b14e3d	96	*/
cparata	4:94c5d5546161	97
cparata	2:a94816b14e3d	98	/**
cparata	2:a94816b14e3d	99	* @defgroup LIS2DW12_Sensitivity
cparata	2:a94816b14e3d	100	* @brief These functions convert raw-data into engineering units.
cparata	2:a94816b14e3d	101	* @{
cparata	2:a94816b14e3d	102	*
cparata	2:a94816b14e3d	103	*/
cparata	2:a94816b14e3d	104
cparata	2:a94816b14e3d	105	float lis2dw12_from_fs2_to_mg(int16_t lsb)
cparata	2:a94816b14e3d	106	{
cparata	4:94c5d5546161	107	return ((float)lsb) * 0.061f;
cparata	2:a94816b14e3d	108	}
cparata	2:a94816b14e3d	109
cparata	2:a94816b14e3d	110	float lis2dw12_from_fs4_to_mg(int16_t lsb)
cparata	2:a94816b14e3d	111	{
cparata	4:94c5d5546161	112	return ((float)lsb) * 0.122f;
cparata	2:a94816b14e3d	113	}
cparata	2:a94816b14e3d	114
cparata	2:a94816b14e3d	115	float lis2dw12_from_fs8_to_mg(int16_t lsb)
cparata	2:a94816b14e3d	116	{
cparata	4:94c5d5546161	117	return ((float)lsb) * 0.244f;
cparata	2:a94816b14e3d	118	}
cparata	2:a94816b14e3d	119
cparata	2:a94816b14e3d	120	float lis2dw12_from_fs16_to_mg(int16_t lsb)
cparata	2:a94816b14e3d	121	{
cparata	4:94c5d5546161	122	return ((float)lsb) * 0.488f;
cparata	2:a94816b14e3d	123	}
cparata	2:a94816b14e3d	124
cparata	2:a94816b14e3d	125	float lis2dw12_from_fs2_lp1_to_mg(int16_t lsb)
cparata	2:a94816b14e3d	126	{
cparata	4:94c5d5546161	127	return ((float)lsb) * 0.061f;
cparata	2:a94816b14e3d	128	}
cparata	2:a94816b14e3d	129
cparata	2:a94816b14e3d	130	float lis2dw12_from_fs4_lp1_to_mg(int16_t lsb)
cparata	2:a94816b14e3d	131	{
cparata	4:94c5d5546161	132	return ((float)lsb) * 0.122f;
cparata	2:a94816b14e3d	133	}
cparata	2:a94816b14e3d	134
cparata	2:a94816b14e3d	135	float lis2dw12_from_fs8_lp1_to_mg(int16_t lsb)
cparata	2:a94816b14e3d	136	{
cparata	4:94c5d5546161	137	return ((float)lsb) * 0.244f;
cparata	2:a94816b14e3d	138	}
cparata	2:a94816b14e3d	139
cparata	2:a94816b14e3d	140	float lis2dw12_from_fs16_lp1_to_mg(int16_t lsb)
cparata	2:a94816b14e3d	141	{
cparata	4:94c5d5546161	142	return ((float)lsb) * 0.488f;
cparata	2:a94816b14e3d	143	}
cparata	2:a94816b14e3d	144
cparata	2:a94816b14e3d	145	float lis2dw12_from_lsb_to_celsius(int16_t lsb)
cparata	2:a94816b14e3d	146	{
cparata	4:94c5d5546161	147	return (((float)lsb / 16.0f) + 25.0f);
cparata	2:a94816b14e3d	148	}
cparata	2:a94816b14e3d	149
cparata	2:a94816b14e3d	150	/**
cparata	2:a94816b14e3d	151	* @}
cparata	2:a94816b14e3d	152	*
cparata	0:dff8803aace7	153	*/
cparata	0:dff8803aace7	154
cparata	0:dff8803aace7	155	/**
cparata	2:a94816b14e3d	156	* @defgroup LIS2DW12_Data_Generation
cparata	4:94c5d5546161	157	* @brief This section groups all the functions concerning
cparata	2:a94816b14e3d	158	* data generation
cparata	0:dff8803aace7	159	* @{
cparata	2:a94816b14e3d	160	*
cparata	0:dff8803aace7	161	*/
cparata	0:dff8803aace7	162
cparata	0:dff8803aace7	163	/**
cparata	2:a94816b14e3d	164	* @brief Select accelerometer operating modes.[set]
cparata	0:dff8803aace7	165	*
cparata	2:a94816b14e3d	166	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	167	* @param val change the values of mode / lp_mode in reg CTRL1
cparata	2:a94816b14e3d	168	* and low_noise in reg CTRL6
cparata	2:a94816b14e3d	169	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	170	*
cparata	0:dff8803aace7	171	*/
cparata	0:dff8803aace7	172	int32_t lis2dw12_power_mode_set(lis2dw12_ctx_t *ctx, lis2dw12_mode_t val)
cparata	0:dff8803aace7	173	{
cparata	4:94c5d5546161	174	lis2dw12_ctrl1_t ctrl1;
cparata	4:94c5d5546161	175	lis2dw12_ctrl6_t ctrl6;
cparata	4:94c5d5546161	176	int32_t ret;
cparata	0:dff8803aace7	177
cparata	4:94c5d5546161	178	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL1, (uint8_t *) &ctrl1, 1);
cparata	4:94c5d5546161	179	if (ret == 0) {
cparata	4:94c5d5546161	180	ctrl1.mode = ((uint8_t) val & 0x0CU) >> 2;
cparata	4:94c5d5546161	181	ctrl1.lp_mode = (uint8_t) val & 0x03U ;
cparata	4:94c5d5546161	182	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL1, (uint8_t *) &ctrl1, 1);
cparata	4:94c5d5546161	183	}
cparata	4:94c5d5546161	184	if (ret == 0) {
cparata	4:94c5d5546161	185	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &ctrl6, 1);
cparata	4:94c5d5546161	186	}
cparata	4:94c5d5546161	187	if (ret == 0) {
cparata	4:94c5d5546161	188	ctrl6.low_noise = ((uint8_t) val & 0x10U) >> 4;
cparata	4:94c5d5546161	189	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &ctrl6, 1);
cparata	4:94c5d5546161	190	}
cparata	4:94c5d5546161	191	return ret;
cparata	0:dff8803aace7	192	}
cparata	0:dff8803aace7	193
cparata	0:dff8803aace7	194	/**
cparata	2:a94816b14e3d	195	* @brief Select accelerometer operating modes.[get]
cparata	0:dff8803aace7	196	*
cparata	2:a94816b14e3d	197	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	198	* @param val change the values of mode / lp_mode in reg CTRL1
cparata	2:a94816b14e3d	199	* and low_noise in reg CTRL6
cparata	2:a94816b14e3d	200	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	201	*
cparata	0:dff8803aace7	202	*/
cparata	0:dff8803aace7	203	int32_t lis2dw12_power_mode_get(lis2dw12_ctx_t ctx, lis2dw12_mode_t val)
cparata	0:dff8803aace7	204	{
cparata	4:94c5d5546161	205	lis2dw12_ctrl1_t ctrl1;
cparata	4:94c5d5546161	206	lis2dw12_ctrl6_t ctrl6;
cparata	4:94c5d5546161	207	int32_t ret;
cparata	2:a94816b14e3d	208
cparata	4:94c5d5546161	209	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL1, (uint8_t *) &ctrl1, 1);
cparata	4:94c5d5546161	210	if (ret == 0) {
cparata	4:94c5d5546161	211	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &ctrl6, 1);
cparata	0:dff8803aace7	212
cparata	4:94c5d5546161	213	switch (((ctrl6.low_noise << 4) + (ctrl1.mode << 2) +
cparata	4:94c5d5546161	214	ctrl1.lp_mode)) {
cparata	4:94c5d5546161	215	case LIS2DW12_HIGH_PERFORMANCE:
cparata	4:94c5d5546161	216	*val = LIS2DW12_HIGH_PERFORMANCE;
cparata	4:94c5d5546161	217	break;
cparata	4:94c5d5546161	218	case LIS2DW12_CONT_LOW_PWR_4:
cparata	4:94c5d5546161	219	*val = LIS2DW12_CONT_LOW_PWR_4;
cparata	4:94c5d5546161	220	break;
cparata	4:94c5d5546161	221	case LIS2DW12_CONT_LOW_PWR_3:
cparata	4:94c5d5546161	222	*val = LIS2DW12_CONT_LOW_PWR_3;
cparata	4:94c5d5546161	223	break;
cparata	4:94c5d5546161	224	case LIS2DW12_CONT_LOW_PWR_2:
cparata	4:94c5d5546161	225	*val = LIS2DW12_CONT_LOW_PWR_2;
cparata	4:94c5d5546161	226	break;
cparata	4:94c5d5546161	227	case LIS2DW12_CONT_LOW_PWR_12bit:
cparata	4:94c5d5546161	228	*val = LIS2DW12_CONT_LOW_PWR_12bit;
cparata	4:94c5d5546161	229	break;
cparata	4:94c5d5546161	230	case LIS2DW12_SINGLE_LOW_PWR_4:
cparata	4:94c5d5546161	231	*val = LIS2DW12_SINGLE_LOW_PWR_4;
cparata	4:94c5d5546161	232	break;
cparata	4:94c5d5546161	233	case LIS2DW12_SINGLE_LOW_PWR_3:
cparata	4:94c5d5546161	234	*val = LIS2DW12_SINGLE_LOW_PWR_3;
cparata	4:94c5d5546161	235	break;
cparata	4:94c5d5546161	236	case LIS2DW12_SINGLE_LOW_PWR_2:
cparata	4:94c5d5546161	237	*val = LIS2DW12_SINGLE_LOW_PWR_2;
cparata	4:94c5d5546161	238	break;
cparata	4:94c5d5546161	239	case LIS2DW12_SINGLE_LOW_PWR_12bit:
cparata	4:94c5d5546161	240	*val = LIS2DW12_SINGLE_LOW_PWR_12bit;
cparata	4:94c5d5546161	241	break;
cparata	4:94c5d5546161	242	case LIS2DW12_HIGH_PERFORMANCE_LOW_NOISE:
cparata	4:94c5d5546161	243	*val = LIS2DW12_HIGH_PERFORMANCE_LOW_NOISE;
cparata	4:94c5d5546161	244	break;
cparata	4:94c5d5546161	245	case LIS2DW12_CONT_LOW_PWR_LOW_NOISE_4:
cparata	4:94c5d5546161	246	*val = LIS2DW12_CONT_LOW_PWR_LOW_NOISE_4;
cparata	4:94c5d5546161	247	break;
cparata	4:94c5d5546161	248	case LIS2DW12_CONT_LOW_PWR_LOW_NOISE_3:
cparata	4:94c5d5546161	249	*val = LIS2DW12_CONT_LOW_PWR_LOW_NOISE_3;
cparata	4:94c5d5546161	250	break;
cparata	4:94c5d5546161	251	case LIS2DW12_CONT_LOW_PWR_LOW_NOISE_2:
cparata	4:94c5d5546161	252	*val = LIS2DW12_CONT_LOW_PWR_LOW_NOISE_2;
cparata	4:94c5d5546161	253	break;
cparata	4:94c5d5546161	254	case LIS2DW12_CONT_LOW_PWR_LOW_NOISE_12bit:
cparata	4:94c5d5546161	255	*val = LIS2DW12_CONT_LOW_PWR_LOW_NOISE_12bit;
cparata	4:94c5d5546161	256	break;
cparata	4:94c5d5546161	257	case LIS2DW12_SINGLE_LOW_PWR_LOW_NOISE_4:
cparata	4:94c5d5546161	258	*val = LIS2DW12_SINGLE_LOW_PWR_LOW_NOISE_4;
cparata	4:94c5d5546161	259	break;
cparata	4:94c5d5546161	260	case LIS2DW12_SINGLE_LOW_PWR_LOW_NOISE_3:
cparata	4:94c5d5546161	261	*val = LIS2DW12_SINGLE_LOW_PWR_LOW_NOISE_3;
cparata	4:94c5d5546161	262	break;
cparata	4:94c5d5546161	263	case LIS2DW12_SINGLE_LOW_PWR_LOW_NOISE_2:
cparata	4:94c5d5546161	264	*val = LIS2DW12_SINGLE_LOW_PWR_LOW_NOISE_2;
cparata	4:94c5d5546161	265	break;
cparata	4:94c5d5546161	266	case LIS2DW12_SINGLE_LOW_LOW_NOISE_PWR_12bit:
cparata	4:94c5d5546161	267	*val = LIS2DW12_SINGLE_LOW_LOW_NOISE_PWR_12bit;
cparata	4:94c5d5546161	268	break;
cparata	4:94c5d5546161	269	default:
cparata	4:94c5d5546161	270	*val = LIS2DW12_HIGH_PERFORMANCE;
cparata	4:94c5d5546161	271	break;
cparata	4:94c5d5546161	272	}
cparata	2:a94816b14e3d	273	}
cparata	4:94c5d5546161	274	return ret;
cparata	0:dff8803aace7	275	}
cparata	0:dff8803aace7	276
cparata	0:dff8803aace7	277	/**
cparata	2:a94816b14e3d	278	* @brief Accelerometer data rate selection.[set]
cparata	0:dff8803aace7	279	*
cparata	2:a94816b14e3d	280	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	281	* @param val change the values of odr in reg CTRL1
cparata	2:a94816b14e3d	282	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	283	*
cparata	0:dff8803aace7	284	*/
cparata	0:dff8803aace7	285	int32_t lis2dw12_data_rate_set(lis2dw12_ctx_t *ctx, lis2dw12_odr_t val)
cparata	0:dff8803aace7	286	{
cparata	4:94c5d5546161	287	lis2dw12_ctrl1_t ctrl1;
cparata	4:94c5d5546161	288	lis2dw12_ctrl3_t ctrl3;
cparata	4:94c5d5546161	289	int32_t ret;
cparata	0:dff8803aace7	290
cparata	4:94c5d5546161	291	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL1, (uint8_t *) &ctrl1, 1);
cparata	4:94c5d5546161	292	if (ret == 0) {
cparata	4:94c5d5546161	293	ctrl1.odr = (uint8_t) val;
cparata	4:94c5d5546161	294	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL1, (uint8_t *) &ctrl1, 1);
cparata	4:94c5d5546161	295	}
cparata	4:94c5d5546161	296	if (ret == 0) {
cparata	4:94c5d5546161	297	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &ctrl3, 1);
cparata	4:94c5d5546161	298	}
cparata	4:94c5d5546161	299	if (ret == 0) {
cparata	4:94c5d5546161	300	ctrl3.slp_mode = ((uint8_t) val & 0x30U) >> 4;
cparata	4:94c5d5546161	301	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &ctrl3, 1);
cparata	4:94c5d5546161	302	}
cparata	4:94c5d5546161	303	return ret;
cparata	0:dff8803aace7	304	}
cparata	0:dff8803aace7	305
cparata	0:dff8803aace7	306	/**
cparata	2:a94816b14e3d	307	* @brief Accelerometer data rate selection.[get]
cparata	0:dff8803aace7	308	*
cparata	2:a94816b14e3d	309	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	310	* @param val Get the values of odr in reg CTRL1
cparata	2:a94816b14e3d	311	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	312	*
cparata	0:dff8803aace7	313	*/
cparata	0:dff8803aace7	314	int32_t lis2dw12_data_rate_get(lis2dw12_ctx_t ctx, lis2dw12_odr_t val)
cparata	0:dff8803aace7	315	{
cparata	4:94c5d5546161	316	lis2dw12_ctrl1_t ctrl1;
cparata	4:94c5d5546161	317	lis2dw12_ctrl3_t ctrl3;
cparata	4:94c5d5546161	318	int32_t ret;
cparata	4:94c5d5546161	319
cparata	4:94c5d5546161	320	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL1, (uint8_t *) &ctrl1, 1);
cparata	4:94c5d5546161	321	if (ret == 0) {
cparata	4:94c5d5546161	322	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &ctrl3, 1);
cparata	0:dff8803aace7	323
cparata	4:94c5d5546161	324	switch ((ctrl3.slp_mode << 4) + ctrl1.odr) {
cparata	4:94c5d5546161	325	case LIS2DW12_XL_ODR_OFF:
cparata	4:94c5d5546161	326	*val = LIS2DW12_XL_ODR_OFF;
cparata	4:94c5d5546161	327	break;
cparata	4:94c5d5546161	328	case LIS2DW12_XL_ODR_1Hz6_LP_ONLY:
cparata	4:94c5d5546161	329	*val = LIS2DW12_XL_ODR_1Hz6_LP_ONLY;
cparata	4:94c5d5546161	330	break;
cparata	4:94c5d5546161	331	case LIS2DW12_XL_ODR_12Hz5:
cparata	4:94c5d5546161	332	*val = LIS2DW12_XL_ODR_12Hz5;
cparata	4:94c5d5546161	333	break;
cparata	4:94c5d5546161	334	case LIS2DW12_XL_ODR_25Hz:
cparata	4:94c5d5546161	335	*val = LIS2DW12_XL_ODR_25Hz;
cparata	4:94c5d5546161	336	break;
cparata	4:94c5d5546161	337	case LIS2DW12_XL_ODR_50Hz:
cparata	4:94c5d5546161	338	*val = LIS2DW12_XL_ODR_50Hz;
cparata	4:94c5d5546161	339	break;
cparata	4:94c5d5546161	340	case LIS2DW12_XL_ODR_100Hz:
cparata	4:94c5d5546161	341	*val = LIS2DW12_XL_ODR_100Hz;
cparata	4:94c5d5546161	342	break;
cparata	4:94c5d5546161	343	case LIS2DW12_XL_ODR_200Hz:
cparata	4:94c5d5546161	344	*val = LIS2DW12_XL_ODR_200Hz;
cparata	4:94c5d5546161	345	break;
cparata	4:94c5d5546161	346	case LIS2DW12_XL_ODR_400Hz:
cparata	4:94c5d5546161	347	*val = LIS2DW12_XL_ODR_400Hz;
cparata	4:94c5d5546161	348	break;
cparata	4:94c5d5546161	349	case LIS2DW12_XL_ODR_800Hz:
cparata	4:94c5d5546161	350	*val = LIS2DW12_XL_ODR_800Hz;
cparata	4:94c5d5546161	351	break;
cparata	4:94c5d5546161	352	case LIS2DW12_XL_ODR_1k6Hz:
cparata	4:94c5d5546161	353	*val = LIS2DW12_XL_ODR_1k6Hz;
cparata	4:94c5d5546161	354	break;
cparata	4:94c5d5546161	355	case LIS2DW12_XL_SET_SW_TRIG:
cparata	4:94c5d5546161	356	*val = LIS2DW12_XL_SET_SW_TRIG;
cparata	4:94c5d5546161	357	break;
cparata	4:94c5d5546161	358	case LIS2DW12_XL_SET_PIN_TRIG:
cparata	4:94c5d5546161	359	*val = LIS2DW12_XL_SET_PIN_TRIG;
cparata	4:94c5d5546161	360	break;
cparata	4:94c5d5546161	361	default:
cparata	4:94c5d5546161	362	*val = LIS2DW12_XL_ODR_OFF;
cparata	4:94c5d5546161	363	break;
cparata	4:94c5d5546161	364	}
cparata	2:a94816b14e3d	365	}
cparata	4:94c5d5546161	366	return ret;
cparata	0:dff8803aace7	367	}
cparata	0:dff8803aace7	368
cparata	0:dff8803aace7	369	/**
cparata	4:94c5d5546161	370	* @brief Block data update.[set]
cparata	0:dff8803aace7	371	*
cparata	2:a94816b14e3d	372	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	373	* @param val change the values of bdu in reg CTRL2
cparata	2:a94816b14e3d	374	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	375	*
cparata	0:dff8803aace7	376	*/
cparata	0:dff8803aace7	377	int32_t lis2dw12_block_data_update_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	378	{
cparata	4:94c5d5546161	379	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	380	int32_t ret;
cparata	0:dff8803aace7	381
cparata	4:94c5d5546161	382	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	383	if (ret == 0) {
cparata	4:94c5d5546161	384	reg.bdu = val;
cparata	4:94c5d5546161	385	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	386	}
cparata	4:94c5d5546161	387	return ret;
cparata	0:dff8803aace7	388	}
cparata	0:dff8803aace7	389
cparata	0:dff8803aace7	390	/**
cparata	2:a94816b14e3d	391	* @brief Block data update.[get]
cparata	0:dff8803aace7	392	*
cparata	2:a94816b14e3d	393	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	394	* @param val change the values of bdu in reg CTRL2
cparata	2:a94816b14e3d	395	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	396	*
cparata	0:dff8803aace7	397	*/
cparata	0:dff8803aace7	398	int32_t lis2dw12_block_data_update_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	399	{
cparata	4:94c5d5546161	400	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	401	int32_t ret;
cparata	0:dff8803aace7	402
cparata	4:94c5d5546161	403	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	404	*val = reg.bdu;
cparata	0:dff8803aace7	405
cparata	4:94c5d5546161	406	return ret;
cparata	0:dff8803aace7	407	}
cparata	0:dff8803aace7	408
cparata	0:dff8803aace7	409	/**
cparata	2:a94816b14e3d	410	* @brief Accelerometer full-scale selection.[set]
cparata	0:dff8803aace7	411	*
cparata	2:a94816b14e3d	412	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	413	* @param val change the values of fs in reg CTRL6
cparata	2:a94816b14e3d	414	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	415	*
cparata	0:dff8803aace7	416	*/
cparata	0:dff8803aace7	417	int32_t lis2dw12_full_scale_set(lis2dw12_ctx_t *ctx, lis2dw12_fs_t val)
cparata	0:dff8803aace7	418	{
cparata	4:94c5d5546161	419	lis2dw12_ctrl6_t reg;
cparata	4:94c5d5546161	420	int32_t ret;
cparata	0:dff8803aace7	421
cparata	4:94c5d5546161	422	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	423	if (ret == 0) {
cparata	4:94c5d5546161	424	reg.fs = (uint8_t) val;
cparata	4:94c5d5546161	425	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	426	}
cparata	4:94c5d5546161	427	return ret;
cparata	0:dff8803aace7	428	}
cparata	0:dff8803aace7	429
cparata	0:dff8803aace7	430	/**
cparata	2:a94816b14e3d	431	* @brief Accelerometer full-scale selection.[get]
cparata	0:dff8803aace7	432	*
cparata	2:a94816b14e3d	433	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	434	* @param val Get the values of fs in reg CTRL6
cparata	2:a94816b14e3d	435	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	436	*
cparata	0:dff8803aace7	437	*/
cparata	0:dff8803aace7	438	int32_t lis2dw12_full_scale_get(lis2dw12_ctx_t ctx, lis2dw12_fs_t val)
cparata	0:dff8803aace7	439	{
cparata	4:94c5d5546161	440	lis2dw12_ctrl6_t reg;
cparata	4:94c5d5546161	441	int32_t ret;
cparata	2:a94816b14e3d	442
cparata	4:94c5d5546161	443	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	444
cparata	4:94c5d5546161	445	switch (reg.fs) {
cparata	4:94c5d5546161	446	case LIS2DW12_2g:
cparata	4:94c5d5546161	447	*val = LIS2DW12_2g;
cparata	4:94c5d5546161	448	break;
cparata	4:94c5d5546161	449	case LIS2DW12_4g:
cparata	4:94c5d5546161	450	*val = LIS2DW12_4g;
cparata	4:94c5d5546161	451	break;
cparata	4:94c5d5546161	452	case LIS2DW12_8g:
cparata	4:94c5d5546161	453	*val = LIS2DW12_8g;
cparata	4:94c5d5546161	454	break;
cparata	4:94c5d5546161	455	case LIS2DW12_16g:
cparata	4:94c5d5546161	456	*val = LIS2DW12_16g;
cparata	4:94c5d5546161	457	break;
cparata	4:94c5d5546161	458	default:
cparata	4:94c5d5546161	459	*val = LIS2DW12_2g;
cparata	4:94c5d5546161	460	break;
cparata	4:94c5d5546161	461	}
cparata	4:94c5d5546161	462	return ret;
cparata	0:dff8803aace7	463	}
cparata	0:dff8803aace7	464
cparata	0:dff8803aace7	465	/**
cparata	2:a94816b14e3d	466	* @brief The STATUS_REG register of the device.[get]
cparata	0:dff8803aace7	467	*
cparata	2:a94816b14e3d	468	* @param ctx read / write interface definitions
cparata	4:94c5d5546161	469	* @param val union of registers from STATUS to
cparata	2:a94816b14e3d	470	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	471	*
cparata	0:dff8803aace7	472	*/
cparata	0:dff8803aace7	473	int32_t lis2dw12_status_reg_get(lis2dw12_ctx_t ctx, lis2dw12_status_t val)
cparata	0:dff8803aace7	474	{
cparata	4:94c5d5546161	475	int32_t ret;
cparata	4:94c5d5546161	476	ret = lis2dw12_read_reg(ctx, LIS2DW12_STATUS, (uint8_t *) val, 1);
cparata	4:94c5d5546161	477	return ret;
cparata	0:dff8803aace7	478	}
cparata	2:a94816b14e3d	479
cparata	0:dff8803aace7	480	/**
cparata	2:a94816b14e3d	481	* @brief Accelerometer new data available.[get]
cparata	0:dff8803aace7	482	*
cparata	2:a94816b14e3d	483	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	484	* @param val change the values of drdy in reg STATUS
cparata	2:a94816b14e3d	485	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	486	*
cparata	0:dff8803aace7	487	*/
cparata	0:dff8803aace7	488	int32_t lis2dw12_flag_data_ready_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	489	{
cparata	4:94c5d5546161	490	lis2dw12_status_t reg;
cparata	4:94c5d5546161	491	int32_t ret;
cparata	0:dff8803aace7	492
cparata	4:94c5d5546161	493	ret = lis2dw12_read_reg(ctx, LIS2DW12_STATUS, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	494	*val = reg.drdy;
cparata	0:dff8803aace7	495
cparata	4:94c5d5546161	496	return ret;
cparata	0:dff8803aace7	497	}
cparata	0:dff8803aace7	498	/**
cparata	2:a94816b14e3d	499	* @brief Read all the interrupt/status flag of the device.[get]
cparata	4:94c5d5546161	500	*
cparata	2:a94816b14e3d	501	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	502	* @param val registers STATUS_DUP, WAKE_UP_SRC,
cparata	2:a94816b14e3d	503	* TAP_SRC, SIXD_SRC, ALL_INT_SRC
cparata	2:a94816b14e3d	504	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	505	*
cparata	0:dff8803aace7	506	*/
cparata	0:dff8803aace7	507	int32_t lis2dw12_all_sources_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	508	lis2dw12_all_sources_t *val)
cparata	0:dff8803aace7	509	{
cparata	4:94c5d5546161	510	int32_t ret;
cparata	4:94c5d5546161	511	ret = lis2dw12_read_reg(ctx, LIS2DW12_STATUS_DUP, (uint8_t *) val, 5);
cparata	4:94c5d5546161	512	return ret;
cparata	0:dff8803aace7	513	}
cparata	2:a94816b14e3d	514
cparata	0:dff8803aace7	515	/**
cparata	4:94c5d5546161	516	* @brief Accelerometer X-axis user offset correction expressed in two’s
cparata	2:a94816b14e3d	517	* complement, weight depends on bit USR_OFF_W. The value must be
cparata	4:94c5d5546161	518	* in the range [-127 127].[set]
cparata	0:dff8803aace7	519	*
cparata	2:a94816b14e3d	520	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	521	* @param buff buffer that contains data to write
cparata	2:a94816b14e3d	522	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	523	*
cparata	0:dff8803aace7	524	*/
cparata	0:dff8803aace7	525	int32_t lis2dw12_usr_offset_x_set(lis2dw12_ctx_t ctx, uint8_t buff)
cparata	0:dff8803aace7	526	{
cparata	4:94c5d5546161	527	int32_t ret;
cparata	4:94c5d5546161	528	ret = lis2dw12_write_reg(ctx, LIS2DW12_X_OFS_USR, buff, 1);
cparata	4:94c5d5546161	529	return ret;
cparata	0:dff8803aace7	530	}
cparata	0:dff8803aace7	531
cparata	0:dff8803aace7	532	/**
cparata	4:94c5d5546161	533	* @brief Accelerometer X-axis user offset correction expressed in two’s
cparata	2:a94816b14e3d	534	* complement, weight depends on bit USR_OFF_W. The value must be
cparata	4:94c5d5546161	535	* in the range [-127 127].[get]
cparata	0:dff8803aace7	536	*
cparata	2:a94816b14e3d	537	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	538	* @param buff buffer that stores data read
cparata	2:a94816b14e3d	539	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	540	*
cparata	0:dff8803aace7	541	*/
cparata	0:dff8803aace7	542	int32_t lis2dw12_usr_offset_x_get(lis2dw12_ctx_t ctx, uint8_t buff)
cparata	0:dff8803aace7	543	{
cparata	4:94c5d5546161	544	int32_t ret;
cparata	4:94c5d5546161	545	ret = lis2dw12_read_reg(ctx, LIS2DW12_X_OFS_USR, buff, 1);
cparata	4:94c5d5546161	546	return ret;
cparata	0:dff8803aace7	547	}
cparata	2:a94816b14e3d	548
cparata	0:dff8803aace7	549	/**
cparata	4:94c5d5546161	550	* @brief Accelerometer Y-axis user offset correction expressed in two’s
cparata	2:a94816b14e3d	551	* complement, weight depends on bit USR_OFF_W. The value must be
cparata	4:94c5d5546161	552	* in the range [-127 127].[set]
cparata	0:dff8803aace7	553	*
cparata	2:a94816b14e3d	554	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	555	* @param buff buffer that contains data to write
cparata	2:a94816b14e3d	556	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	557	*
cparata	0:dff8803aace7	558	*/
cparata	0:dff8803aace7	559	int32_t lis2dw12_usr_offset_y_set(lis2dw12_ctx_t ctx, uint8_t buff)
cparata	0:dff8803aace7	560	{
cparata	4:94c5d5546161	561	int32_t ret;
cparata	4:94c5d5546161	562	ret = lis2dw12_write_reg(ctx, LIS2DW12_Y_OFS_USR, buff, 1);
cparata	4:94c5d5546161	563	return ret;
cparata	0:dff8803aace7	564	}
cparata	0:dff8803aace7	565
cparata	0:dff8803aace7	566	/**
cparata	4:94c5d5546161	567	* @brief Accelerometer Y-axis user offset correction expressed in two’s
cparata	2:a94816b14e3d	568	* complement, weight depends on bit USR_OFF_W. The value must be
cparata	4:94c5d5546161	569	* in the range [-127 127].[get]
cparata	0:dff8803aace7	570	*
cparata	2:a94816b14e3d	571	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	572	* @param buff buffer that stores data read
cparata	2:a94816b14e3d	573	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	574	*
cparata	0:dff8803aace7	575	*/
cparata	0:dff8803aace7	576	int32_t lis2dw12_usr_offset_y_get(lis2dw12_ctx_t ctx, uint8_t buff)
cparata	0:dff8803aace7	577	{
cparata	4:94c5d5546161	578	int32_t ret;
cparata	4:94c5d5546161	579	ret = lis2dw12_read_reg(ctx, LIS2DW12_Y_OFS_USR, buff, 1);
cparata	4:94c5d5546161	580	return ret;
cparata	0:dff8803aace7	581	}
cparata	2:a94816b14e3d	582
cparata	0:dff8803aace7	583	/**
cparata	4:94c5d5546161	584	* @brief Accelerometer Z-axis user offset correction expressed in two’s
cparata	2:a94816b14e3d	585	* complement, weight depends on bit USR_OFF_W. The value must be
cparata	4:94c5d5546161	586	* in the range [-127 127].[set]
cparata	0:dff8803aace7	587	*
cparata	2:a94816b14e3d	588	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	589	* @param buff buffer that contains data to write
cparata	2:a94816b14e3d	590	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	591	*
cparata	0:dff8803aace7	592	*/
cparata	0:dff8803aace7	593	int32_t lis2dw12_usr_offset_z_set(lis2dw12_ctx_t ctx, uint8_t buff)
cparata	0:dff8803aace7	594	{
cparata	4:94c5d5546161	595	int32_t ret;
cparata	4:94c5d5546161	596	ret = lis2dw12_write_reg(ctx, LIS2DW12_Z_OFS_USR, buff, 1);
cparata	4:94c5d5546161	597	return ret;
cparata	0:dff8803aace7	598	}
cparata	0:dff8803aace7	599
cparata	0:dff8803aace7	600	/**
cparata	4:94c5d5546161	601	* @brief Accelerometer Z-axis user offset correction expressed in two’s
cparata	2:a94816b14e3d	602	* complement, weight depends on bit USR_OFF_W. The value must be
cparata	4:94c5d5546161	603	* in the range [-127 127].[get]
cparata	0:dff8803aace7	604	*
cparata	2:a94816b14e3d	605	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	606	* @param buff buffer that stores data read
cparata	2:a94816b14e3d	607	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	608	*
cparata	0:dff8803aace7	609	*/
cparata	0:dff8803aace7	610	int32_t lis2dw12_usr_offset_z_get(lis2dw12_ctx_t ctx, uint8_t buff)
cparata	0:dff8803aace7	611	{
cparata	4:94c5d5546161	612	int32_t ret;
cparata	4:94c5d5546161	613	ret = lis2dw12_read_reg(ctx, LIS2DW12_Z_OFS_USR, buff, 1);
cparata	4:94c5d5546161	614	return ret;
cparata	0:dff8803aace7	615	}
cparata	2:a94816b14e3d	616
cparata	0:dff8803aace7	617	/**
cparata	4:94c5d5546161	618	* @brief Weight of XL user offset bits of registers X_OFS_USR,
cparata	2:a94816b14e3d	619	* Y_OFS_USR, Z_OFS_USR.[set]
cparata	0:dff8803aace7	620	*
cparata	2:a94816b14e3d	621	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	622	* @param val change the values of usr_off_w in
cparata	0:dff8803aace7	623	* reg CTRL_REG7
cparata	2:a94816b14e3d	624	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	625	*
cparata	0:dff8803aace7	626	*/
cparata	0:dff8803aace7	627	int32_t lis2dw12_offset_weight_set(lis2dw12_ctx_t *ctx,
cparata	2:a94816b14e3d	628	lis2dw12_usr_off_w_t val)
cparata	0:dff8803aace7	629	{
cparata	4:94c5d5546161	630	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	631	int32_t ret;
cparata	0:dff8803aace7	632
cparata	4:94c5d5546161	633	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	634	if (ret == 0) {
cparata	4:94c5d5546161	635	reg.usr_off_w = (uint8_t) val;
cparata	4:94c5d5546161	636	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	637	}
cparata	4:94c5d5546161	638	return ret;
cparata	0:dff8803aace7	639	}
cparata	0:dff8803aace7	640
cparata	0:dff8803aace7	641	/**
cparata	4:94c5d5546161	642	* @brief Weight of XL user offset bits of registers X_OFS_USR,
cparata	2:a94816b14e3d	643	* Y_OFS_USR, Z_OFS_USR.[get]
cparata	0:dff8803aace7	644	*
cparata	2:a94816b14e3d	645	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	646	* @param val Get the values of usr_off_w in reg CTRL_REG7
cparata	2:a94816b14e3d	647	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	648	*
cparata	0:dff8803aace7	649	*/
cparata	0:dff8803aace7	650	int32_t lis2dw12_offset_weight_get(lis2dw12_ctx_t *ctx,
cparata	2:a94816b14e3d	651	lis2dw12_usr_off_w_t *val)
cparata	0:dff8803aace7	652	{
cparata	4:94c5d5546161	653	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	654	int32_t ret;
cparata	0:dff8803aace7	655
cparata	4:94c5d5546161	656	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	657	switch (reg.usr_off_w) {
cparata	4:94c5d5546161	658	case LIS2DW12_LSb_977ug:
cparata	4:94c5d5546161	659	*val = LIS2DW12_LSb_977ug;
cparata	4:94c5d5546161	660	break;
cparata	4:94c5d5546161	661	case LIS2DW12_LSb_15mg6:
cparata	4:94c5d5546161	662	*val = LIS2DW12_LSb_15mg6;
cparata	4:94c5d5546161	663	break;
cparata	4:94c5d5546161	664	default:
cparata	4:94c5d5546161	665	*val = LIS2DW12_LSb_977ug;
cparata	4:94c5d5546161	666	break;
cparata	4:94c5d5546161	667	}
cparata	4:94c5d5546161	668	return ret;
cparata	0:dff8803aace7	669	}
cparata	0:dff8803aace7	670
cparata	0:dff8803aace7	671	/**
cparata	0:dff8803aace7	672	* @}
cparata	2:a94816b14e3d	673	*
cparata	0:dff8803aace7	674	*/
cparata	0:dff8803aace7	675
cparata	0:dff8803aace7	676	/**
cparata	2:a94816b14e3d	677	* @defgroup LIS2DW12_Data_Output
cparata	2:a94816b14e3d	678	* @brief This section groups all the data output functions.
cparata	0:dff8803aace7	679	* @{
cparata	2:a94816b14e3d	680	*
cparata	0:dff8803aace7	681	*/
cparata	0:dff8803aace7	682
cparata	0:dff8803aace7	683	/**
cparata	4:94c5d5546161	684	* @brief Temperature data output register (r). L and H registers
cparata	2:a94816b14e3d	685	* together express a 16-bit word in two’s complement.[get]
cparata	0:dff8803aace7	686	*
cparata	2:a94816b14e3d	687	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	688	* @param buff buffer that stores data read
cparata	2:a94816b14e3d	689	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	690	*
cparata	0:dff8803aace7	691	*/
cparata	0:dff8803aace7	692	int32_t lis2dw12_temperature_raw_get(lis2dw12_ctx_t ctx, uint8_t buff)
cparata	0:dff8803aace7	693	{
cparata	4:94c5d5546161	694	int32_t ret;
cparata	4:94c5d5546161	695	ret = lis2dw12_read_reg(ctx, LIS2DW12_OUT_T_L, buff, 2);
cparata	4:94c5d5546161	696	return ret;
cparata	0:dff8803aace7	697	}
cparata	0:dff8803aace7	698
cparata	0:dff8803aace7	699	/**
cparata	4:94c5d5546161	700	* @brief Linear acceleration output register. The value is expressed as
cparata	2:a94816b14e3d	701	* a 16-bit word in two’s complement.[get]
cparata	0:dff8803aace7	702	*
cparata	2:a94816b14e3d	703	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	704	* @param buff buffer that stores data read
cparata	2:a94816b14e3d	705	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	706	*
cparata	0:dff8803aace7	707	*/
cparata	0:dff8803aace7	708	int32_t lis2dw12_acceleration_raw_get(lis2dw12_ctx_t ctx, uint8_t buff)
cparata	0:dff8803aace7	709	{
cparata	4:94c5d5546161	710	int32_t ret;
cparata	4:94c5d5546161	711	ret = lis2dw12_read_reg(ctx, LIS2DW12_OUT_X_L, buff, 6);
cparata	4:94c5d5546161	712	return ret;
cparata	0:dff8803aace7	713	}
cparata	0:dff8803aace7	714
cparata	0:dff8803aace7	715	/**
cparata	0:dff8803aace7	716	* @}
cparata	2:a94816b14e3d	717	*
cparata	0:dff8803aace7	718	*/
cparata	0:dff8803aace7	719
cparata	0:dff8803aace7	720	/**
cparata	2:a94816b14e3d	721	* @defgroup LIS2DW12_Common
cparata	2:a94816b14e3d	722	* @brief This section groups common useful functions.
cparata	0:dff8803aace7	723	* @{
cparata	2:a94816b14e3d	724	*
cparata	0:dff8803aace7	725	*/
cparata	0:dff8803aace7	726
cparata	0:dff8803aace7	727	/**
cparata	2:a94816b14e3d	728	* @brief Device Who am I.[get]
cparata	0:dff8803aace7	729	*
cparata	2:a94816b14e3d	730	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	731	* @param buff buffer that stores data read
cparata	2:a94816b14e3d	732	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	733	*
cparata	0:dff8803aace7	734	*/
cparata	0:dff8803aace7	735	int32_t lis2dw12_device_id_get(lis2dw12_ctx_t ctx, uint8_t buff)
cparata	0:dff8803aace7	736	{
cparata	4:94c5d5546161	737	int32_t ret;
cparata	4:94c5d5546161	738	ret = lis2dw12_read_reg(ctx, LIS2DW12_WHO_AM_I, buff, 1);
cparata	4:94c5d5546161	739	return ret;
cparata	0:dff8803aace7	740	}
cparata	0:dff8803aace7	741
cparata	0:dff8803aace7	742	/**
cparata	4:94c5d5546161	743	* @brief Register address automatically incremented during multiple byte
cparata	2:a94816b14e3d	744	* access with a serial interface.[set]
cparata	0:dff8803aace7	745	*
cparata	2:a94816b14e3d	746	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	747	* @param val change the values of if_add_inc in reg CTRL2
cparata	2:a94816b14e3d	748	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	749	*
cparata	0:dff8803aace7	750	*/
cparata	0:dff8803aace7	751	int32_t lis2dw12_auto_increment_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	752	{
cparata	4:94c5d5546161	753	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	754	int32_t ret;
cparata	0:dff8803aace7	755
cparata	4:94c5d5546161	756	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	757	if (ret == 0) {
cparata	4:94c5d5546161	758	reg.if_add_inc = val;
cparata	4:94c5d5546161	759	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	760	}
cparata	4:94c5d5546161	761	return ret;
cparata	0:dff8803aace7	762	}
cparata	0:dff8803aace7	763
cparata	0:dff8803aace7	764	/**
cparata	4:94c5d5546161	765	* @brief Register address automatically incremented during multiple
cparata	2:a94816b14e3d	766	* byte access with a serial interface.[get]
cparata	0:dff8803aace7	767	*
cparata	2:a94816b14e3d	768	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	769	* @param val change the values of if_add_inc in reg CTRL2
cparata	2:a94816b14e3d	770	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	771	*
cparata	0:dff8803aace7	772	*/
cparata	0:dff8803aace7	773	int32_t lis2dw12_auto_increment_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	774	{
cparata	4:94c5d5546161	775	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	776	int32_t ret;
cparata	0:dff8803aace7	777
cparata	4:94c5d5546161	778	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	779	*val = reg.if_add_inc;
cparata	0:dff8803aace7	780
cparata	4:94c5d5546161	781	return ret;
cparata	0:dff8803aace7	782	}
cparata	0:dff8803aace7	783
cparata	0:dff8803aace7	784	/**
cparata	2:a94816b14e3d	785	* @brief Software reset. Restore the default values in user registers.[set]
cparata	0:dff8803aace7	786	*
cparata	2:a94816b14e3d	787	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	788	* @param val change the values of soft_reset in reg CTRL2
cparata	2:a94816b14e3d	789	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	790	*
cparata	0:dff8803aace7	791	*/
cparata	0:dff8803aace7	792	int32_t lis2dw12_reset_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	793	{
cparata	4:94c5d5546161	794	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	795	int32_t ret;
cparata	0:dff8803aace7	796
cparata	4:94c5d5546161	797	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	798	if (ret == 0) {
cparata	4:94c5d5546161	799	reg.soft_reset = val;
cparata	4:94c5d5546161	800	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	801	}
cparata	0:dff8803aace7	802
cparata	4:94c5d5546161	803	return ret;
cparata	0:dff8803aace7	804	}
cparata	0:dff8803aace7	805
cparata	0:dff8803aace7	806	/**
cparata	2:a94816b14e3d	807	* @brief Software reset. Restore the default values in user registers.[get]
cparata	0:dff8803aace7	808	*
cparata	2:a94816b14e3d	809	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	810	* @param val change the values of soft_reset in reg CTRL2
cparata	2:a94816b14e3d	811	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	812	*
cparata	0:dff8803aace7	813	*/
cparata	0:dff8803aace7	814	int32_t lis2dw12_reset_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	815	{
cparata	4:94c5d5546161	816	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	817	int32_t ret;
cparata	0:dff8803aace7	818
cparata	4:94c5d5546161	819	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	820	*val = reg.soft_reset;
cparata	0:dff8803aace7	821
cparata	4:94c5d5546161	822	return ret;
cparata	0:dff8803aace7	823	}
cparata	0:dff8803aace7	824
cparata	0:dff8803aace7	825	/**
cparata	2:a94816b14e3d	826	* @brief Reboot memory content. Reload the calibration parameters.[set]
cparata	0:dff8803aace7	827	*
cparata	2:a94816b14e3d	828	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	829	* @param val change the values of boot in reg CTRL2
cparata	2:a94816b14e3d	830	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	831	*
cparata	0:dff8803aace7	832	*/
cparata	0:dff8803aace7	833	int32_t lis2dw12_boot_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	834	{
cparata	4:94c5d5546161	835	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	836	int32_t ret;
cparata	0:dff8803aace7	837
cparata	4:94c5d5546161	838	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	839	if (ret == 0) {
cparata	4:94c5d5546161	840	reg.boot = val;
cparata	4:94c5d5546161	841	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	842	}
cparata	4:94c5d5546161	843	return ret;
cparata	0:dff8803aace7	844	}
cparata	0:dff8803aace7	845
cparata	0:dff8803aace7	846	/**
cparata	2:a94816b14e3d	847	* @brief Reboot memory content. Reload the calibration parameters.[get]
cparata	0:dff8803aace7	848	*
cparata	2:a94816b14e3d	849	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	850	* @param val change the values of boot in reg CTRL2
cparata	2:a94816b14e3d	851	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	852	*
cparata	0:dff8803aace7	853	*/
cparata	0:dff8803aace7	854	int32_t lis2dw12_boot_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	855	{
cparata	4:94c5d5546161	856	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	857	int32_t ret;
cparata	0:dff8803aace7	858
cparata	4:94c5d5546161	859	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	860	*val = reg.boot;
cparata	0:dff8803aace7	861
cparata	4:94c5d5546161	862	return ret;
cparata	0:dff8803aace7	863	}
cparata	0:dff8803aace7	864
cparata	0:dff8803aace7	865	/**
cparata	4:94c5d5546161	866	* @brief Sensor self-test enable.[set]
cparata	0:dff8803aace7	867	*
cparata	2:a94816b14e3d	868	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	869	* @param val change the values of st in reg CTRL3
cparata	2:a94816b14e3d	870	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	871	*
cparata	0:dff8803aace7	872	*/
cparata	0:dff8803aace7	873	int32_t lis2dw12_self_test_set(lis2dw12_ctx_t *ctx, lis2dw12_st_t val)
cparata	0:dff8803aace7	874	{
cparata	4:94c5d5546161	875	lis2dw12_ctrl3_t reg;
cparata	4:94c5d5546161	876	int32_t ret;
cparata	0:dff8803aace7	877
cparata	4:94c5d5546161	878	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	879	if (ret == 0) {
cparata	4:94c5d5546161	880	reg.st = (uint8_t) val;
cparata	4:94c5d5546161	881	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	882	}
cparata	0:dff8803aace7	883
cparata	4:94c5d5546161	884	return ret;
cparata	0:dff8803aace7	885	}
cparata	0:dff8803aace7	886
cparata	0:dff8803aace7	887	/**
cparata	2:a94816b14e3d	888	* @brief Sensor self-test enable.[get]
cparata	0:dff8803aace7	889	*
cparata	2:a94816b14e3d	890	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	891	* @param val Get the values of st in reg CTRL3
cparata	2:a94816b14e3d	892	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	893	*
cparata	0:dff8803aace7	894	*/
cparata	0:dff8803aace7	895	int32_t lis2dw12_self_test_get(lis2dw12_ctx_t ctx, lis2dw12_st_t val)
cparata	0:dff8803aace7	896	{
cparata	4:94c5d5546161	897	lis2dw12_ctrl3_t reg;
cparata	4:94c5d5546161	898	int32_t ret;
cparata	2:a94816b14e3d	899
cparata	4:94c5d5546161	900	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	901
cparata	4:94c5d5546161	902	switch (reg.st) {
cparata	4:94c5d5546161	903	case LIS2DW12_XL_ST_DISABLE:
cparata	4:94c5d5546161	904	*val = LIS2DW12_XL_ST_DISABLE;
cparata	4:94c5d5546161	905	break;
cparata	4:94c5d5546161	906	case LIS2DW12_XL_ST_POSITIVE:
cparata	4:94c5d5546161	907	*val = LIS2DW12_XL_ST_POSITIVE;
cparata	4:94c5d5546161	908	break;
cparata	4:94c5d5546161	909	case LIS2DW12_XL_ST_NEGATIVE:
cparata	4:94c5d5546161	910	*val = LIS2DW12_XL_ST_NEGATIVE;
cparata	4:94c5d5546161	911	break;
cparata	4:94c5d5546161	912	default:
cparata	4:94c5d5546161	913	*val = LIS2DW12_XL_ST_DISABLE;
cparata	4:94c5d5546161	914	break;
cparata	4:94c5d5546161	915	}
cparata	4:94c5d5546161	916	return ret;
cparata	0:dff8803aace7	917	}
cparata	0:dff8803aace7	918
cparata	0:dff8803aace7	919	/**
cparata	2:a94816b14e3d	920	* @brief Data-ready pulsed / letched mode.[set]
cparata	0:dff8803aace7	921	*
cparata	2:a94816b14e3d	922	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	923	* @param val change the values of drdy_pulsed in reg CTRL_REG7
cparata	2:a94816b14e3d	924	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	925	*
cparata	0:dff8803aace7	926	*/
cparata	0:dff8803aace7	927	int32_t lis2dw12_data_ready_mode_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	928	lis2dw12_drdy_pulsed_t val)
cparata	0:dff8803aace7	929	{
cparata	4:94c5d5546161	930	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	931	int32_t ret;
cparata	0:dff8803aace7	932
cparata	4:94c5d5546161	933	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	934	if (ret == 0) {
cparata	4:94c5d5546161	935	reg.drdy_pulsed = (uint8_t) val;
cparata	4:94c5d5546161	936	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	937	}
cparata	0:dff8803aace7	938
cparata	4:94c5d5546161	939	return ret;
cparata	0:dff8803aace7	940	}
cparata	0:dff8803aace7	941
cparata	0:dff8803aace7	942	/**
cparata	2:a94816b14e3d	943	* @brief Data-ready pulsed / letched mode.[get]
cparata	0:dff8803aace7	944	*
cparata	2:a94816b14e3d	945	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	946	* @param val Get the values of drdy_pulsed in reg CTRL_REG7
cparata	2:a94816b14e3d	947	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	948	*
cparata	0:dff8803aace7	949	*/
cparata	0:dff8803aace7	950	int32_t lis2dw12_data_ready_mode_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	951	lis2dw12_drdy_pulsed_t *val)
cparata	0:dff8803aace7	952	{
cparata	4:94c5d5546161	953	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	954	int32_t ret;
cparata	2:a94816b14e3d	955
cparata	4:94c5d5546161	956	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	957
cparata	4:94c5d5546161	958	switch (reg.drdy_pulsed) {
cparata	4:94c5d5546161	959	case LIS2DW12_DRDY_LATCHED:
cparata	4:94c5d5546161	960	*val = LIS2DW12_DRDY_LATCHED;
cparata	4:94c5d5546161	961	break;
cparata	4:94c5d5546161	962	case LIS2DW12_DRDY_PULSED:
cparata	4:94c5d5546161	963	*val = LIS2DW12_DRDY_PULSED;
cparata	4:94c5d5546161	964	break;
cparata	4:94c5d5546161	965	default:
cparata	4:94c5d5546161	966	*val = LIS2DW12_DRDY_LATCHED;
cparata	4:94c5d5546161	967	break;
cparata	4:94c5d5546161	968	}
cparata	4:94c5d5546161	969	return ret;
cparata	0:dff8803aace7	970	}
cparata	0:dff8803aace7	971
cparata	0:dff8803aace7	972	/**
cparata	0:dff8803aace7	973	* @}
cparata	2:a94816b14e3d	974	*
cparata	0:dff8803aace7	975	*/
cparata	0:dff8803aace7	976
cparata	0:dff8803aace7	977	/**
cparata	2:a94816b14e3d	978	* @defgroup LIS2DW12_Filters
cparata	2:a94816b14e3d	979	* @brief This section group all the functions concerning the filters
cparata	2:a94816b14e3d	980	* configuration.
cparata	0:dff8803aace7	981	* @{
cparata	2:a94816b14e3d	982	*
cparata	0:dff8803aace7	983	*/
cparata	0:dff8803aace7	984
cparata	0:dff8803aace7	985	/**
cparata	2:a94816b14e3d	986	* @brief Accelerometer filtering path for outputs.[set]
cparata	0:dff8803aace7	987	*
cparata	2:a94816b14e3d	988	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	989	* @param val change the values of fds in reg CTRL6
cparata	2:a94816b14e3d	990	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	991	*
cparata	0:dff8803aace7	992	*/
cparata	0:dff8803aace7	993	int32_t lis2dw12_filter_path_set(lis2dw12_ctx_t *ctx, lis2dw12_fds_t val)
cparata	0:dff8803aace7	994	{
cparata	4:94c5d5546161	995	lis2dw12_ctrl6_t ctrl6;
cparata	4:94c5d5546161	996	lis2dw12_ctrl_reg7_t ctrl_reg7;
cparata	4:94c5d5546161	997	int32_t ret;
cparata	0:dff8803aace7	998
cparata	4:94c5d5546161	999	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &ctrl6, 1);
cparata	4:94c5d5546161	1000	if (ret == 0) {
cparata	4:94c5d5546161	1001	ctrl6.fds = ((uint8_t) val & 0x10U) >> 4;
cparata	4:94c5d5546161	1002	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &ctrl6, 1);
cparata	4:94c5d5546161	1003	}
cparata	4:94c5d5546161	1004	if (ret == 0) {
cparata	4:94c5d5546161	1005	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &ctrl_reg7, 1);
cparata	4:94c5d5546161	1006	}
cparata	4:94c5d5546161	1007	if (ret == 0) {
cparata	4:94c5d5546161	1008	ctrl_reg7.usr_off_on_out = (uint8_t) val & 0x01U;
cparata	4:94c5d5546161	1009	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &ctrl_reg7, 1);
cparata	4:94c5d5546161	1010	}
cparata	4:94c5d5546161	1011
cparata	4:94c5d5546161	1012	return ret;
cparata	0:dff8803aace7	1013	}
cparata	0:dff8803aace7	1014
cparata	0:dff8803aace7	1015	/**
cparata	2:a94816b14e3d	1016	* @brief Accelerometer filtering path for outputs.[get]
cparata	0:dff8803aace7	1017	*
cparata	2:a94816b14e3d	1018	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1019	* @param val Get the values of fds in reg CTRL6
cparata	2:a94816b14e3d	1020	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1021	*
cparata	0:dff8803aace7	1022	*/
cparata	0:dff8803aace7	1023	int32_t lis2dw12_filter_path_get(lis2dw12_ctx_t ctx, lis2dw12_fds_t val)
cparata	0:dff8803aace7	1024	{
cparata	4:94c5d5546161	1025	lis2dw12_ctrl6_t ctrl6;
cparata	4:94c5d5546161	1026	lis2dw12_ctrl_reg7_t ctrl_reg7;
cparata	4:94c5d5546161	1027	int32_t ret;
cparata	4:94c5d5546161	1028
cparata	4:94c5d5546161	1029	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &ctrl6, 1);
cparata	4:94c5d5546161	1030	if (ret == 0) {
cparata	4:94c5d5546161	1031	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &ctrl_reg7, 1);
cparata	0:dff8803aace7	1032
cparata	4:94c5d5546161	1033	switch ((ctrl6.fds << 4) + ctrl_reg7.usr_off_on_out) {
cparata	4:94c5d5546161	1034	case LIS2DW12_LPF_ON_OUT:
cparata	4:94c5d5546161	1035	*val = LIS2DW12_LPF_ON_OUT;
cparata	4:94c5d5546161	1036	break;
cparata	4:94c5d5546161	1037	case LIS2DW12_USER_OFFSET_ON_OUT:
cparata	4:94c5d5546161	1038	*val = LIS2DW12_USER_OFFSET_ON_OUT;
cparata	4:94c5d5546161	1039	break;
cparata	4:94c5d5546161	1040	case LIS2DW12_HIGH_PASS_ON_OUT:
cparata	4:94c5d5546161	1041	*val = LIS2DW12_HIGH_PASS_ON_OUT;
cparata	4:94c5d5546161	1042	break;
cparata	4:94c5d5546161	1043	default:
cparata	4:94c5d5546161	1044	*val = LIS2DW12_LPF_ON_OUT;
cparata	4:94c5d5546161	1045	break;
cparata	4:94c5d5546161	1046	}
cparata	2:a94816b14e3d	1047	}
cparata	4:94c5d5546161	1048	return ret;
cparata	0:dff8803aace7	1049	}
cparata	0:dff8803aace7	1050
cparata	0:dff8803aace7	1051	/**
cparata	4:94c5d5546161	1052	* @brief Accelerometer cutoff filter frequency. Valid for low and high
cparata	2:a94816b14e3d	1053	* pass filter.[set]
cparata	0:dff8803aace7	1054	*
cparata	2:a94816b14e3d	1055	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1056	* @param val change the values of bw_filt in reg CTRL6
cparata	2:a94816b14e3d	1057	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1058	*
cparata	0:dff8803aace7	1059	*/
cparata	0:dff8803aace7	1060	int32_t lis2dw12_filter_bandwidth_set(lis2dw12_ctx_t *ctx,
cparata	4:94c5d5546161	1061	lis2dw12_bw_filt_t val)
cparata	0:dff8803aace7	1062	{
cparata	4:94c5d5546161	1063	lis2dw12_ctrl6_t reg;
cparata	4:94c5d5546161	1064	int32_t ret;
cparata	0:dff8803aace7	1065
cparata	4:94c5d5546161	1066	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1067	if (ret == 0) {
cparata	4:94c5d5546161	1068	reg.bw_filt = (uint8_t) val;
cparata	4:94c5d5546161	1069	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1070	}
cparata	0:dff8803aace7	1071
cparata	4:94c5d5546161	1072	return ret;
cparata	0:dff8803aace7	1073	}
cparata	0:dff8803aace7	1074
cparata	0:dff8803aace7	1075	/**
cparata	4:94c5d5546161	1076	* @brief Accelerometer cutoff filter frequency. Valid for low and
cparata	2:a94816b14e3d	1077	* high pass filter.[get]
cparata	0:dff8803aace7	1078	*
cparata	2:a94816b14e3d	1079	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1080	* @param val Get the values of bw_filt in reg CTRL6
cparata	2:a94816b14e3d	1081	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1082	*
cparata	0:dff8803aace7	1083	*/
cparata	0:dff8803aace7	1084	int32_t lis2dw12_filter_bandwidth_get(lis2dw12_ctx_t *ctx,
cparata	4:94c5d5546161	1085	lis2dw12_bw_filt_t *val)
cparata	0:dff8803aace7	1086	{
cparata	4:94c5d5546161	1087	lis2dw12_ctrl6_t reg;
cparata	4:94c5d5546161	1088	int32_t ret;
cparata	2:a94816b14e3d	1089
cparata	4:94c5d5546161	1090	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL6, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	1091
cparata	4:94c5d5546161	1092	switch (reg.bw_filt) {
cparata	4:94c5d5546161	1093	case LIS2DW12_ODR_DIV_2:
cparata	4:94c5d5546161	1094	*val = LIS2DW12_ODR_DIV_2;
cparata	4:94c5d5546161	1095	break;
cparata	4:94c5d5546161	1096	case LIS2DW12_ODR_DIV_4:
cparata	4:94c5d5546161	1097	*val = LIS2DW12_ODR_DIV_4;
cparata	4:94c5d5546161	1098	break;
cparata	4:94c5d5546161	1099	case LIS2DW12_ODR_DIV_10:
cparata	4:94c5d5546161	1100	*val = LIS2DW12_ODR_DIV_10;
cparata	4:94c5d5546161	1101	break;
cparata	4:94c5d5546161	1102	case LIS2DW12_ODR_DIV_20:
cparata	4:94c5d5546161	1103	*val = LIS2DW12_ODR_DIV_20;
cparata	4:94c5d5546161	1104	break;
cparata	4:94c5d5546161	1105	default:
cparata	4:94c5d5546161	1106	*val = LIS2DW12_ODR_DIV_2;
cparata	4:94c5d5546161	1107	break;
cparata	4:94c5d5546161	1108	}
cparata	4:94c5d5546161	1109	return ret;
cparata	0:dff8803aace7	1110	}
cparata	0:dff8803aace7	1111
cparata	0:dff8803aace7	1112	/**
cparata	2:a94816b14e3d	1113	* @brief Enable HP filter reference mode.[set]
cparata	0:dff8803aace7	1114	*
cparata	2:a94816b14e3d	1115	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1116	* @param val change the values of hp_ref_mode in reg CTRL_REG7
cparata	2:a94816b14e3d	1117	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1118	*
cparata	0:dff8803aace7	1119	*/
cparata	0:dff8803aace7	1120	int32_t lis2dw12_reference_mode_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	1121	{
cparata	4:94c5d5546161	1122	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	1123	int32_t ret;
cparata	0:dff8803aace7	1124
cparata	4:94c5d5546161	1125	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1126	if (ret == 0) {
cparata	4:94c5d5546161	1127	reg.hp_ref_mode = val;
cparata	4:94c5d5546161	1128	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1129	}
cparata	4:94c5d5546161	1130	return ret;
cparata	0:dff8803aace7	1131	}
cparata	0:dff8803aace7	1132
cparata	0:dff8803aace7	1133	/**
cparata	2:a94816b14e3d	1134	* @brief Enable HP filter reference mode.[get]
cparata	0:dff8803aace7	1135	*
cparata	2:a94816b14e3d	1136	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1137	* @param val change the values of hp_ref_mode in reg CTRL_REG7
cparata	2:a94816b14e3d	1138	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1139	*
cparata	0:dff8803aace7	1140	*/
cparata	0:dff8803aace7	1141	int32_t lis2dw12_reference_mode_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	1142	{
cparata	4:94c5d5546161	1143	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	1144	int32_t ret;
cparata	0:dff8803aace7	1145
cparata	4:94c5d5546161	1146	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1147	*val = reg.hp_ref_mode;
cparata	0:dff8803aace7	1148
cparata	4:94c5d5546161	1149	return ret;
cparata	0:dff8803aace7	1150	}
cparata	0:dff8803aace7	1151
cparata	0:dff8803aace7	1152	/**
cparata	0:dff8803aace7	1153	* @}
cparata	2:a94816b14e3d	1154	*
cparata	0:dff8803aace7	1155	*/
cparata	0:dff8803aace7	1156
cparata	0:dff8803aace7	1157	/**
cparata	2:a94816b14e3d	1158	* @defgroup LIS2DW12_Serial_Interface
cparata	2:a94816b14e3d	1159	* @brief This section groups all the functions concerning main serial
cparata	2:a94816b14e3d	1160	* interface management (not auxiliary)
cparata	0:dff8803aace7	1161	* @{
cparata	2:a94816b14e3d	1162	*
cparata	0:dff8803aace7	1163	*/
cparata	0:dff8803aace7	1164
cparata	0:dff8803aace7	1165	/**
cparata	2:a94816b14e3d	1166	* @brief SPI Serial Interface Mode selection.[set]
cparata	0:dff8803aace7	1167	*
cparata	2:a94816b14e3d	1168	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1169	* @param val change the values of sim in reg CTRL2
cparata	2:a94816b14e3d	1170	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1171	*
cparata	0:dff8803aace7	1172	*/
cparata	0:dff8803aace7	1173	int32_t lis2dw12_spi_mode_set(lis2dw12_ctx_t *ctx, lis2dw12_sim_t val)
cparata	0:dff8803aace7	1174	{
cparata	4:94c5d5546161	1175	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	1176	int32_t ret;
cparata	0:dff8803aace7	1177
cparata	4:94c5d5546161	1178	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1179	if (ret == 0) {
cparata	4:94c5d5546161	1180	reg.sim = (uint8_t) val;
cparata	4:94c5d5546161	1181	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1182	}
cparata	4:94c5d5546161	1183	return ret;
cparata	0:dff8803aace7	1184	}
cparata	0:dff8803aace7	1185
cparata	0:dff8803aace7	1186	/**
cparata	4:94c5d5546161	1187	* @brief SPI Serial Interface Mode selection.[get]
cparata	0:dff8803aace7	1188	*
cparata	2:a94816b14e3d	1189	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1190	* @param val Get the values of sim in reg CTRL2
cparata	2:a94816b14e3d	1191	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1192	*
cparata	0:dff8803aace7	1193	*/
cparata	0:dff8803aace7	1194	int32_t lis2dw12_spi_mode_get(lis2dw12_ctx_t ctx, lis2dw12_sim_t val)
cparata	0:dff8803aace7	1195	{
cparata	4:94c5d5546161	1196	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	1197	int32_t ret;
cparata	2:a94816b14e3d	1198
cparata	4:94c5d5546161	1199	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	1200
cparata	4:94c5d5546161	1201	switch (reg.sim) {
cparata	4:94c5d5546161	1202	case LIS2DW12_SPI_4_WIRE:
cparata	4:94c5d5546161	1203	*val = LIS2DW12_SPI_4_WIRE;
cparata	4:94c5d5546161	1204	break;
cparata	4:94c5d5546161	1205	case LIS2DW12_SPI_3_WIRE:
cparata	4:94c5d5546161	1206	*val = LIS2DW12_SPI_3_WIRE;
cparata	4:94c5d5546161	1207	break;
cparata	4:94c5d5546161	1208	default:
cparata	4:94c5d5546161	1209	*val = LIS2DW12_SPI_4_WIRE;
cparata	4:94c5d5546161	1210	break;
cparata	4:94c5d5546161	1211	}
cparata	4:94c5d5546161	1212	return ret;
cparata	0:dff8803aace7	1213	}
cparata	0:dff8803aace7	1214
cparata	0:dff8803aace7	1215	/**
cparata	2:a94816b14e3d	1216	* @brief Disable / Enable I2C interface.[set]
cparata	0:dff8803aace7	1217	*
cparata	2:a94816b14e3d	1218	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1219	* @param val change the values of i2c_disable in
cparata	0:dff8803aace7	1220	* reg CTRL2
cparata	2:a94816b14e3d	1221	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1222	*
cparata	0:dff8803aace7	1223	*/
cparata	0:dff8803aace7	1224	int32_t lis2dw12_i2c_interface_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1225	lis2dw12_i2c_disable_t val)
cparata	0:dff8803aace7	1226	{
cparata	4:94c5d5546161	1227	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	1228	int32_t ret;
cparata	0:dff8803aace7	1229
cparata	4:94c5d5546161	1230	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1231	if (ret == 0) {
cparata	4:94c5d5546161	1232	reg.i2c_disable = (uint8_t) val;
cparata	4:94c5d5546161	1233	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1234	}
cparata	4:94c5d5546161	1235	return ret;
cparata	0:dff8803aace7	1236	}
cparata	0:dff8803aace7	1237
cparata	0:dff8803aace7	1238	/**
cparata	4:94c5d5546161	1239	* @brief Disable / Enable I2C interface.[get]
cparata	0:dff8803aace7	1240	*
cparata	2:a94816b14e3d	1241	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1242	* @param val Get the values of i2c_disable in reg CTRL2
cparata	2:a94816b14e3d	1243	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1244	*
cparata	0:dff8803aace7	1245	*/
cparata	0:dff8803aace7	1246	int32_t lis2dw12_i2c_interface_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1247	lis2dw12_i2c_disable_t *val)
cparata	0:dff8803aace7	1248	{
cparata	4:94c5d5546161	1249	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	1250	int32_t ret;
cparata	2:a94816b14e3d	1251
cparata	4:94c5d5546161	1252	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	1253
cparata	4:94c5d5546161	1254	switch (reg.i2c_disable) {
cparata	4:94c5d5546161	1255	case LIS2DW12_I2C_ENABLE:
cparata	4:94c5d5546161	1256	*val = LIS2DW12_I2C_ENABLE;
cparata	4:94c5d5546161	1257	break;
cparata	4:94c5d5546161	1258	case LIS2DW12_I2C_DISABLE:
cparata	4:94c5d5546161	1259	*val = LIS2DW12_I2C_DISABLE;
cparata	4:94c5d5546161	1260	break;
cparata	4:94c5d5546161	1261	default:
cparata	4:94c5d5546161	1262	*val = LIS2DW12_I2C_ENABLE;
cparata	4:94c5d5546161	1263	break;
cparata	4:94c5d5546161	1264	}
cparata	4:94c5d5546161	1265	return ret;
cparata	0:dff8803aace7	1266	}
cparata	0:dff8803aace7	1267
cparata	0:dff8803aace7	1268	/**
cparata	2:a94816b14e3d	1269	* @brief Disconnect CS pull-up.[set]
cparata	0:dff8803aace7	1270	*
cparata	2:a94816b14e3d	1271	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1272	* @param val change the values of cs_pu_disc in reg CTRL2
cparata	2:a94816b14e3d	1273	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1274	*
cparata	0:dff8803aace7	1275	*/
cparata	0:dff8803aace7	1276	int32_t lis2dw12_cs_mode_set(lis2dw12_ctx_t *ctx, lis2dw12_cs_pu_disc_t val)
cparata	0:dff8803aace7	1277	{
cparata	4:94c5d5546161	1278	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	1279	int32_t ret;
cparata	0:dff8803aace7	1280
cparata	4:94c5d5546161	1281	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1282	if (ret == 0) {
cparata	4:94c5d5546161	1283	reg.cs_pu_disc = (uint8_t) val;
cparata	4:94c5d5546161	1284	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1285	}
cparata	4:94c5d5546161	1286	return ret;
cparata	0:dff8803aace7	1287	}
cparata	0:dff8803aace7	1288
cparata	0:dff8803aace7	1289	/**
cparata	2:a94816b14e3d	1290	* @brief Disconnect CS pull-up.[get]
cparata	0:dff8803aace7	1291	*
cparata	2:a94816b14e3d	1292	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1293	* @param val Get the values of cs_pu_disc in reg CTRL2
cparata	2:a94816b14e3d	1294	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1295	*
cparata	0:dff8803aace7	1296	*/
cparata	0:dff8803aace7	1297	int32_t lis2dw12_cs_mode_get(lis2dw12_ctx_t ctx, lis2dw12_cs_pu_disc_t val)
cparata	0:dff8803aace7	1298	{
cparata	4:94c5d5546161	1299	lis2dw12_ctrl2_t reg;
cparata	4:94c5d5546161	1300	int32_t ret;
cparata	2:a94816b14e3d	1301
cparata	4:94c5d5546161	1302	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL2, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	1303
cparata	4:94c5d5546161	1304	switch (reg.cs_pu_disc) {
cparata	4:94c5d5546161	1305	case LIS2DW12_PULL_UP_CONNECT:
cparata	4:94c5d5546161	1306	*val = LIS2DW12_PULL_UP_CONNECT;
cparata	4:94c5d5546161	1307	break;
cparata	4:94c5d5546161	1308	case LIS2DW12_PULL_UP_DISCONNECT:
cparata	4:94c5d5546161	1309	*val = LIS2DW12_PULL_UP_DISCONNECT;
cparata	4:94c5d5546161	1310	break;
cparata	4:94c5d5546161	1311	default:
cparata	4:94c5d5546161	1312	*val = LIS2DW12_PULL_UP_CONNECT;
cparata	4:94c5d5546161	1313	break;
cparata	4:94c5d5546161	1314	}
cparata	4:94c5d5546161	1315	return ret;
cparata	0:dff8803aace7	1316	}
cparata	0:dff8803aace7	1317
cparata	0:dff8803aace7	1318	/**
cparata	0:dff8803aace7	1319	* @}
cparata	2:a94816b14e3d	1320	*
cparata	0:dff8803aace7	1321	*/
cparata	0:dff8803aace7	1322
cparata	0:dff8803aace7	1323	/**
cparata	2:a94816b14e3d	1324	* @defgroup LIS2DW12_Interrupt_Pins
cparata	2:a94816b14e3d	1325	* @brief This section groups all the functions that manage interrupt pins
cparata	0:dff8803aace7	1326	* @{
cparata	2:a94816b14e3d	1327	*
cparata	0:dff8803aace7	1328	*/
cparata	0:dff8803aace7	1329
cparata	0:dff8803aace7	1330	/**
cparata	2:a94816b14e3d	1331	* @brief Interrupt active-high/low.[set]
cparata	0:dff8803aace7	1332	*
cparata	2:a94816b14e3d	1333	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1334	* @param val change the values of h_lactive in reg CTRL3
cparata	2:a94816b14e3d	1335	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1336	*
cparata	0:dff8803aace7	1337	*/
cparata	0:dff8803aace7	1338	int32_t lis2dw12_pin_polarity_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1339	lis2dw12_h_lactive_t val)
cparata	0:dff8803aace7	1340	{
cparata	4:94c5d5546161	1341	lis2dw12_ctrl3_t reg;
cparata	4:94c5d5546161	1342	int32_t ret;
cparata	0:dff8803aace7	1343
cparata	4:94c5d5546161	1344	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1345	if (ret == 0) {
cparata	4:94c5d5546161	1346	reg.h_lactive = (uint8_t) val;
cparata	4:94c5d5546161	1347	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1348	}
cparata	4:94c5d5546161	1349	return ret;
cparata	0:dff8803aace7	1350	}
cparata	0:dff8803aace7	1351
cparata	0:dff8803aace7	1352	/**
cparata	2:a94816b14e3d	1353	* @brief Interrupt active-high/low.[get]
cparata	0:dff8803aace7	1354	*
cparata	2:a94816b14e3d	1355	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1356	* @param val Get the values of h_lactive in reg CTRL3
cparata	2:a94816b14e3d	1357	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1358	*
cparata	0:dff8803aace7	1359	*/
cparata	0:dff8803aace7	1360	int32_t lis2dw12_pin_polarity_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1361	lis2dw12_h_lactive_t *val)
cparata	0:dff8803aace7	1362	{
cparata	4:94c5d5546161	1363	lis2dw12_ctrl3_t reg;
cparata	4:94c5d5546161	1364	int32_t ret;
cparata	2:a94816b14e3d	1365
cparata	4:94c5d5546161	1366	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	1367
cparata	4:94c5d5546161	1368	switch (reg.h_lactive) {
cparata	4:94c5d5546161	1369	case LIS2DW12_ACTIVE_HIGH:
cparata	4:94c5d5546161	1370	*val = LIS2DW12_ACTIVE_HIGH;
cparata	4:94c5d5546161	1371	break;
cparata	4:94c5d5546161	1372	case LIS2DW12_ACTIVE_LOW:
cparata	4:94c5d5546161	1373	*val = LIS2DW12_ACTIVE_LOW;
cparata	4:94c5d5546161	1374	break;
cparata	4:94c5d5546161	1375	default:
cparata	4:94c5d5546161	1376	*val = LIS2DW12_ACTIVE_HIGH;
cparata	4:94c5d5546161	1377	break;
cparata	4:94c5d5546161	1378	}
cparata	4:94c5d5546161	1379	return ret;
cparata	0:dff8803aace7	1380	}
cparata	0:dff8803aace7	1381
cparata	0:dff8803aace7	1382	/**
cparata	4:94c5d5546161	1383	* @brief Latched/pulsed interrupt.[set]
cparata	0:dff8803aace7	1384	*
cparata	2:a94816b14e3d	1385	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1386	* @param val change the values of lir in reg CTRL3
cparata	2:a94816b14e3d	1387	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1388	*
cparata	0:dff8803aace7	1389	*/
cparata	0:dff8803aace7	1390	int32_t lis2dw12_int_notification_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1391	lis2dw12_lir_t val)
cparata	0:dff8803aace7	1392	{
cparata	4:94c5d5546161	1393	lis2dw12_ctrl3_t reg;
cparata	4:94c5d5546161	1394	int32_t ret;
cparata	0:dff8803aace7	1395
cparata	4:94c5d5546161	1396	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1397	if (ret == 0) {
cparata	4:94c5d5546161	1398	reg.lir = (uint8_t) val;
cparata	4:94c5d5546161	1399	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1400	}
cparata	4:94c5d5546161	1401	return ret;
cparata	0:dff8803aace7	1402	}
cparata	0:dff8803aace7	1403
cparata	0:dff8803aace7	1404	/**
cparata	2:a94816b14e3d	1405	* @brief Latched/pulsed interrupt.[get]
cparata	0:dff8803aace7	1406	*
cparata	2:a94816b14e3d	1407	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1408	* @param val Get the values of lir in reg CTRL3
cparata	2:a94816b14e3d	1409	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1410	*
cparata	0:dff8803aace7	1411	*/
cparata	0:dff8803aace7	1412	int32_t lis2dw12_int_notification_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1413	lis2dw12_lir_t *val)
cparata	0:dff8803aace7	1414	{
cparata	4:94c5d5546161	1415	lis2dw12_ctrl3_t reg;
cparata	4:94c5d5546161	1416	int32_t ret;
cparata	2:a94816b14e3d	1417
cparata	4:94c5d5546161	1418	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	1419
cparata	4:94c5d5546161	1420	switch (reg.lir) {
cparata	4:94c5d5546161	1421	case LIS2DW12_INT_PULSED:
cparata	4:94c5d5546161	1422	*val = LIS2DW12_INT_PULSED;
cparata	4:94c5d5546161	1423	break;
cparata	4:94c5d5546161	1424	case LIS2DW12_INT_LATCHED:
cparata	4:94c5d5546161	1425	*val = LIS2DW12_INT_LATCHED;
cparata	4:94c5d5546161	1426	break;
cparata	4:94c5d5546161	1427	default:
cparata	4:94c5d5546161	1428	*val = LIS2DW12_INT_PULSED;
cparata	4:94c5d5546161	1429	break;
cparata	4:94c5d5546161	1430	}
cparata	4:94c5d5546161	1431	return ret;
cparata	0:dff8803aace7	1432	}
cparata	0:dff8803aace7	1433
cparata	0:dff8803aace7	1434	/**
cparata	2:a94816b14e3d	1435	* @brief Push-pull/open drain selection on interrupt pads.[set]
cparata	0:dff8803aace7	1436	*
cparata	2:a94816b14e3d	1437	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1438	* @param val change the values of pp_od in reg CTRL3
cparata	2:a94816b14e3d	1439	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1440	*
cparata	0:dff8803aace7	1441	*/
cparata	0:dff8803aace7	1442	int32_t lis2dw12_pin_mode_set(lis2dw12_ctx_t *ctx, lis2dw12_pp_od_t val)
cparata	0:dff8803aace7	1443	{
cparata	4:94c5d5546161	1444	lis2dw12_ctrl3_t reg;
cparata	4:94c5d5546161	1445	int32_t ret;
cparata	0:dff8803aace7	1446
cparata	4:94c5d5546161	1447	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1448	if (ret == 0) {
cparata	4:94c5d5546161	1449	reg.pp_od = (uint8_t) val;
cparata	4:94c5d5546161	1450	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1451	}
cparata	4:94c5d5546161	1452	return ret;
cparata	0:dff8803aace7	1453	}
cparata	0:dff8803aace7	1454
cparata	0:dff8803aace7	1455	/**
cparata	2:a94816b14e3d	1456	* @brief Push-pull/open drain selection on interrupt pads.[get]
cparata	0:dff8803aace7	1457	*
cparata	2:a94816b14e3d	1458	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1459	* @param val Get the values of pp_od in reg CTRL3
cparata	2:a94816b14e3d	1460	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1461	*
cparata	0:dff8803aace7	1462	*/
cparata	0:dff8803aace7	1463	int32_t lis2dw12_pin_mode_get(lis2dw12_ctx_t ctx, lis2dw12_pp_od_t val)
cparata	0:dff8803aace7	1464	{
cparata	4:94c5d5546161	1465	lis2dw12_ctrl3_t reg;
cparata	4:94c5d5546161	1466	int32_t ret;
cparata	2:a94816b14e3d	1467
cparata	4:94c5d5546161	1468	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL3, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	1469
cparata	4:94c5d5546161	1470	switch (reg.pp_od) {
cparata	4:94c5d5546161	1471	case LIS2DW12_PUSH_PULL:
cparata	4:94c5d5546161	1472	*val = LIS2DW12_PUSH_PULL;
cparata	4:94c5d5546161	1473	break;
cparata	4:94c5d5546161	1474	case LIS2DW12_OPEN_DRAIN:
cparata	4:94c5d5546161	1475	*val = LIS2DW12_OPEN_DRAIN;
cparata	4:94c5d5546161	1476	break;
cparata	4:94c5d5546161	1477	default:
cparata	4:94c5d5546161	1478	*val = LIS2DW12_PUSH_PULL;
cparata	4:94c5d5546161	1479	break;
cparata	4:94c5d5546161	1480	}
cparata	4:94c5d5546161	1481	return ret;
cparata	0:dff8803aace7	1482	}
cparata	0:dff8803aace7	1483
cparata	0:dff8803aace7	1484	/**
cparata	2:a94816b14e3d	1485	* @brief Select the signal that need to route on int1 pad.[set]
cparata	0:dff8803aace7	1486	*
cparata	2:a94816b14e3d	1487	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1488	* @param val register CTRL4_INT1_PAD_CTRL.
cparata	2:a94816b14e3d	1489	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1490	*
cparata	0:dff8803aace7	1491	*/
cparata	0:dff8803aace7	1492	int32_t lis2dw12_pin_int1_route_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1493	lis2dw12_ctrl4_int1_pad_ctrl_t *val)
cparata	0:dff8803aace7	1494	{
cparata	4:94c5d5546161	1495	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	1496	int32_t ret;
cparata	4:94c5d5546161	1497
cparata	4:94c5d5546161	1498	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1499	if (ret == 0) {
cparata	4:94c5d5546161	1500	if ((val->int1_tap \| val->int1_ff \| val->int1_wu \| val->int1_single_tap \|
cparata	4:94c5d5546161	1501	val->int1_6d) != PROPERTY_DISABLE) {
cparata	4:94c5d5546161	1502	reg.interrupts_enable = PROPERTY_ENABLE;
cparata	4:94c5d5546161	1503	} else {
cparata	4:94c5d5546161	1504	reg.interrupts_enable = PROPERTY_DISABLE;
cparata	4:94c5d5546161	1505	}
cparata	4:94c5d5546161	1506
cparata	4:94c5d5546161	1507	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL4_INT1_PAD_CTRL,
cparata	4:94c5d5546161	1508	(uint8_t *) val, 1);
cparata	2:a94816b14e3d	1509	}
cparata	4:94c5d5546161	1510	if (ret == 0) {
cparata	4:94c5d5546161	1511	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1512	}
cparata	4:94c5d5546161	1513	return ret;
cparata	0:dff8803aace7	1514	}
cparata	0:dff8803aace7	1515
cparata	0:dff8803aace7	1516	/**
cparata	2:a94816b14e3d	1517	* @brief Select the signal that need to route on int1 pad.[get]
cparata	0:dff8803aace7	1518	*
cparata	2:a94816b14e3d	1519	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1520	* @param val register CTRL4_INT1_PAD_CTRL.
cparata	2:a94816b14e3d	1521	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1522	*
cparata	0:dff8803aace7	1523	*/
cparata	0:dff8803aace7	1524	int32_t lis2dw12_pin_int1_route_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1525	lis2dw12_ctrl4_int1_pad_ctrl_t *val)
cparata	0:dff8803aace7	1526	{
cparata	4:94c5d5546161	1527	int32_t ret;
cparata	4:94c5d5546161	1528	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL4_INT1_PAD_CTRL,
cparata	4:94c5d5546161	1529	(uint8_t *) val, 1);
cparata	4:94c5d5546161	1530	return ret;
cparata	0:dff8803aace7	1531	}
cparata	2:a94816b14e3d	1532
cparata	0:dff8803aace7	1533	/**
cparata	4:94c5d5546161	1534	* @brief Select the signal that need to route on int2 pad.[set]
cparata	0:dff8803aace7	1535	*
cparata	2:a94816b14e3d	1536	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1537	* @param val register CTRL5_INT2_PAD_CTRL.
cparata	2:a94816b14e3d	1538	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1539	*
cparata	0:dff8803aace7	1540	*/
cparata	0:dff8803aace7	1541	int32_t lis2dw12_pin_int2_route_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1542	lis2dw12_ctrl5_int2_pad_ctrl_t *val)
cparata	0:dff8803aace7	1543	{
cparata	4:94c5d5546161	1544	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	1545	int32_t ret;
cparata	4:94c5d5546161	1546
cparata	4:94c5d5546161	1547	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1548	if (ret == 0) {
cparata	4:94c5d5546161	1549	if ((val->int2_sleep_state \| val->int2_sleep_chg) != PROPERTY_DISABLE) {
cparata	4:94c5d5546161	1550	reg.interrupts_enable = PROPERTY_ENABLE;
cparata	4:94c5d5546161	1551	} else {
cparata	4:94c5d5546161	1552	reg.interrupts_enable = PROPERTY_DISABLE;
cparata	4:94c5d5546161	1553	}
cparata	4:94c5d5546161	1554
cparata	4:94c5d5546161	1555	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL5_INT2_PAD_CTRL,
cparata	4:94c5d5546161	1556	(uint8_t *) val, 1);
cparata	2:a94816b14e3d	1557	}
cparata	4:94c5d5546161	1558	if (ret == 0) {
cparata	4:94c5d5546161	1559	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1560	}
cparata	4:94c5d5546161	1561
cparata	4:94c5d5546161	1562	return ret;
cparata	0:dff8803aace7	1563	}
cparata	0:dff8803aace7	1564
cparata	0:dff8803aace7	1565	/**
cparata	2:a94816b14e3d	1566	* @brief Select the signal that need to route on int2 pad.[get]
cparata	0:dff8803aace7	1567	*
cparata	2:a94816b14e3d	1568	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1569	* @param val register CTRL5_INT2_PAD_CTRL
cparata	2:a94816b14e3d	1570	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1571	*
cparata	0:dff8803aace7	1572	*/
cparata	0:dff8803aace7	1573	int32_t lis2dw12_pin_int2_route_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1574	lis2dw12_ctrl5_int2_pad_ctrl_t *val)
cparata	0:dff8803aace7	1575	{
cparata	4:94c5d5546161	1576	int32_t ret;
cparata	4:94c5d5546161	1577	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL5_INT2_PAD_CTRL,
cparata	4:94c5d5546161	1578	(uint8_t *) val, 1);
cparata	4:94c5d5546161	1579	return ret;
cparata	0:dff8803aace7	1580	}
cparata	0:dff8803aace7	1581	/**
cparata	4:94c5d5546161	1582	* @brief All interrupt signals become available on INT1 pin.[set]
cparata	0:dff8803aace7	1583	*
cparata	2:a94816b14e3d	1584	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1585	* @param val change the values of int2_on_int1 in reg CTRL_REG7
cparata	2:a94816b14e3d	1586	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1587	*
cparata	0:dff8803aace7	1588	*/
cparata	0:dff8803aace7	1589	int32_t lis2dw12_all_on_int1_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	1590	{
cparata	4:94c5d5546161	1591	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	1592	int32_t ret;
cparata	0:dff8803aace7	1593
cparata	4:94c5d5546161	1594	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1595	if (ret == 0) {
cparata	4:94c5d5546161	1596	reg.int2_on_int1 = val;
cparata	4:94c5d5546161	1597	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1598	}
cparata	4:94c5d5546161	1599	return ret;
cparata	0:dff8803aace7	1600	}
cparata	0:dff8803aace7	1601
cparata	0:dff8803aace7	1602	/**
cparata	2:a94816b14e3d	1603	* @brief All interrupt signals become available on INT1 pin.[get]
cparata	0:dff8803aace7	1604	*
cparata	2:a94816b14e3d	1605	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1606	* @param val change the values of int2_on_int1 in reg CTRL_REG7
cparata	2:a94816b14e3d	1607	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1608	*
cparata	0:dff8803aace7	1609	*/
cparata	0:dff8803aace7	1610	int32_t lis2dw12_all_on_int1_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	1611	{
cparata	4:94c5d5546161	1612	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	1613	int32_t ret;
cparata	0:dff8803aace7	1614
cparata	4:94c5d5546161	1615	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1616	*val = reg.int2_on_int1;
cparata	0:dff8803aace7	1617
cparata	4:94c5d5546161	1618	return ret;
cparata	0:dff8803aace7	1619	}
cparata	0:dff8803aace7	1620
cparata	0:dff8803aace7	1621	/**
cparata	0:dff8803aace7	1622	* @}
cparata	2:a94816b14e3d	1623	*
cparata	0:dff8803aace7	1624	*/
cparata	0:dff8803aace7	1625
cparata	0:dff8803aace7	1626	/**
cparata	2:a94816b14e3d	1627	* @defgroup LIS2DW12_Wake_Up_Event
cparata	2:a94816b14e3d	1628	* @brief This section groups all the functions that manage the Wake
cparata	2:a94816b14e3d	1629	* Up event generation.
cparata	0:dff8803aace7	1630	* @{
cparata	2:a94816b14e3d	1631	*
cparata	0:dff8803aace7	1632	*/
cparata	0:dff8803aace7	1633
cparata	0:dff8803aace7	1634	/**
cparata	2:a94816b14e3d	1635	* @brief Threshold for wakeup.1 LSB = FS_XL / 64.[set]
cparata	0:dff8803aace7	1636	*
cparata	2:a94816b14e3d	1637	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1638	* @param val change the values of wk_ths in reg WAKE_UP_THS
cparata	2:a94816b14e3d	1639	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1640	*
cparata	0:dff8803aace7	1641	*/
cparata	0:dff8803aace7	1642	int32_t lis2dw12_wkup_threshold_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	1643	{
cparata	4:94c5d5546161	1644	lis2dw12_wake_up_ths_t reg;
cparata	4:94c5d5546161	1645	int32_t ret;
cparata	0:dff8803aace7	1646
cparata	4:94c5d5546161	1647	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_THS, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1648	if (ret == 0) {
cparata	4:94c5d5546161	1649	reg.wk_ths = val;
cparata	4:94c5d5546161	1650	ret = lis2dw12_write_reg(ctx, LIS2DW12_WAKE_UP_THS, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1651	}
cparata	4:94c5d5546161	1652	return ret;
cparata	0:dff8803aace7	1653	}
cparata	0:dff8803aace7	1654
cparata	0:dff8803aace7	1655	/**
cparata	2:a94816b14e3d	1656	* @brief Threshold for wakeup.1 LSB = FS_XL / 64.[get]
cparata	0:dff8803aace7	1657	*
cparata	2:a94816b14e3d	1658	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1659	* @param val change the values of wk_ths in reg WAKE_UP_THS
cparata	2:a94816b14e3d	1660	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1661	*
cparata	0:dff8803aace7	1662	*/
cparata	0:dff8803aace7	1663	int32_t lis2dw12_wkup_threshold_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	1664	{
cparata	4:94c5d5546161	1665	lis2dw12_wake_up_ths_t reg;
cparata	4:94c5d5546161	1666	int32_t ret;
cparata	0:dff8803aace7	1667
cparata	4:94c5d5546161	1668	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_THS, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1669	*val = reg.wk_ths;
cparata	0:dff8803aace7	1670
cparata	4:94c5d5546161	1671	return ret;
cparata	0:dff8803aace7	1672	}
cparata	0:dff8803aace7	1673
cparata	0:dff8803aace7	1674	/**
cparata	2:a94816b14e3d	1675	* @brief Wake up duration event.1LSb = 1 / ODR.[set]
cparata	0:dff8803aace7	1676	*
cparata	2:a94816b14e3d	1677	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1678	* @param val change the values of wake_dur in reg WAKE_UP_DUR
cparata	2:a94816b14e3d	1679	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1680	*
cparata	0:dff8803aace7	1681	*/
cparata	0:dff8803aace7	1682	int32_t lis2dw12_wkup_dur_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	1683	{
cparata	4:94c5d5546161	1684	lis2dw12_wake_up_dur_t reg;
cparata	4:94c5d5546161	1685	int32_t ret;
cparata	0:dff8803aace7	1686
cparata	4:94c5d5546161	1687	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1688	if (ret == 0) {
cparata	4:94c5d5546161	1689	reg.wake_dur = val;
cparata	4:94c5d5546161	1690	ret = lis2dw12_write_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1691	}
cparata	4:94c5d5546161	1692	return ret;
cparata	0:dff8803aace7	1693	}
cparata	0:dff8803aace7	1694
cparata	0:dff8803aace7	1695	/**
cparata	2:a94816b14e3d	1696	* @brief Wake up duration event.1LSb = 1 / ODR.[get]
cparata	0:dff8803aace7	1697	*
cparata	2:a94816b14e3d	1698	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1699	* @param val change the values of wake_dur in reg WAKE_UP_DUR
cparata	2:a94816b14e3d	1700	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1701	*
cparata	0:dff8803aace7	1702	*/
cparata	0:dff8803aace7	1703	int32_t lis2dw12_wkup_dur_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	1704	{
cparata	4:94c5d5546161	1705	lis2dw12_wake_up_dur_t reg;
cparata	4:94c5d5546161	1706	int32_t ret;
cparata	0:dff8803aace7	1707
cparata	4:94c5d5546161	1708	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1709	*val = reg.wake_dur;
cparata	0:dff8803aace7	1710
cparata	4:94c5d5546161	1711	return ret;
cparata	0:dff8803aace7	1712	}
cparata	0:dff8803aace7	1713
cparata	0:dff8803aace7	1714	/**
cparata	2:a94816b14e3d	1715	* @brief Data sent to wake-up interrupt function.[set]
cparata	0:dff8803aace7	1716	*
cparata	2:a94816b14e3d	1717	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1718	* @param val change the values of usr_off_on_wu in reg CTRL_REG7
cparata	2:a94816b14e3d	1719	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1720	*
cparata	0:dff8803aace7	1721	*/
cparata	0:dff8803aace7	1722	int32_t lis2dw12_wkup_feed_data_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1723	lis2dw12_usr_off_on_wu_t val)
cparata	0:dff8803aace7	1724	{
cparata	4:94c5d5546161	1725	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	1726	int32_t ret;
cparata	0:dff8803aace7	1727
cparata	4:94c5d5546161	1728	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1729	if (ret == 0) {
cparata	4:94c5d5546161	1730	reg.usr_off_on_wu = (uint8_t) val;
cparata	4:94c5d5546161	1731	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1732	}
cparata	4:94c5d5546161	1733	return ret;
cparata	0:dff8803aace7	1734	}
cparata	0:dff8803aace7	1735
cparata	0:dff8803aace7	1736	/**
cparata	2:a94816b14e3d	1737	* @brief Data sent to wake-up interrupt function.[get]
cparata	0:dff8803aace7	1738	*
cparata	2:a94816b14e3d	1739	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1740	* @param val Get the values of usr_off_on_wu in reg CTRL_REG7
cparata	2:a94816b14e3d	1741	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1742	*
cparata	0:dff8803aace7	1743	*/
cparata	0:dff8803aace7	1744	int32_t lis2dw12_wkup_feed_data_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1745	lis2dw12_usr_off_on_wu_t *val)
cparata	0:dff8803aace7	1746	{
cparata	4:94c5d5546161	1747	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	1748	int32_t ret;
cparata	2:a94816b14e3d	1749
cparata	4:94c5d5546161	1750	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	1751
cparata	4:94c5d5546161	1752	switch (reg.usr_off_on_wu) {
cparata	4:94c5d5546161	1753	case LIS2DW12_HP_FEED:
cparata	4:94c5d5546161	1754	*val = LIS2DW12_HP_FEED;
cparata	4:94c5d5546161	1755	break;
cparata	4:94c5d5546161	1756	case LIS2DW12_USER_OFFSET_FEED:
cparata	4:94c5d5546161	1757	*val = LIS2DW12_USER_OFFSET_FEED;
cparata	4:94c5d5546161	1758	break;
cparata	4:94c5d5546161	1759	default:
cparata	4:94c5d5546161	1760	*val = LIS2DW12_HP_FEED;
cparata	4:94c5d5546161	1761	break;
cparata	4:94c5d5546161	1762	}
cparata	4:94c5d5546161	1763	return ret;
cparata	0:dff8803aace7	1764	}
cparata	0:dff8803aace7	1765
cparata	0:dff8803aace7	1766	/**
cparata	0:dff8803aace7	1767	* @}
cparata	2:a94816b14e3d	1768	*
cparata	0:dff8803aace7	1769	*/
cparata	0:dff8803aace7	1770
cparata	0:dff8803aace7	1771	/**
cparata	2:a94816b14e3d	1772	* @defgroup LIS2DW12_Activity/Inactivity_Detection
cparata	2:a94816b14e3d	1773	* @brief This section groups all the functions concerning
cparata	2:a94816b14e3d	1774	* activity/inactivity detection.
cparata	0:dff8803aace7	1775	* @{
cparata	2:a94816b14e3d	1776	*
cparata	0:dff8803aace7	1777	*/
cparata	0:dff8803aace7	1778
cparata	0:dff8803aace7	1779	/**
cparata	4:94c5d5546161	1780	* @brief Config activity / inactivity or
cparata	2:a94816b14e3d	1781	* stationary / motion detection.[set]
cparata	0:dff8803aace7	1782	*
cparata	2:a94816b14e3d	1783	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1784	* @param val change the values of sleep_on / stationary in
cparata	2:a94816b14e3d	1785	* reg WAKE_UP_THS / WAKE_UP_DUR
cparata	2:a94816b14e3d	1786	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1787	*
cparata	0:dff8803aace7	1788	*/
cparata	0:dff8803aace7	1789	int32_t lis2dw12_act_mode_set(lis2dw12_ctx_t *ctx, lis2dw12_sleep_on_t val)
cparata	0:dff8803aace7	1790	{
cparata	4:94c5d5546161	1791	lis2dw12_wake_up_ths_t wake_up_ths;
cparata	4:94c5d5546161	1792	lis2dw12_wake_up_dur_t wake_up_dur;
cparata	4:94c5d5546161	1793	int32_t ret;
cparata	4:94c5d5546161	1794
cparata	4:94c5d5546161	1795	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_THS, (uint8_t *) &wake_up_ths, 1);
cparata	4:94c5d5546161	1796	if (ret == 0) {
cparata	4:94c5d5546161	1797	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &wake_up_dur, 1);
cparata	4:94c5d5546161	1798	}
cparata	4:94c5d5546161	1799	if (ret == 0) {
cparata	4:94c5d5546161	1800	wake_up_ths.sleep_on = (uint8_t) val & 0x01U;
cparata	4:94c5d5546161	1801	ret = lis2dw12_write_reg(ctx, LIS2DW12_WAKE_UP_THS, (uint8_t *) &wake_up_ths, 1);
cparata	4:94c5d5546161	1802	}
cparata	4:94c5d5546161	1803	if (ret == 0) {
cparata	4:94c5d5546161	1804	wake_up_dur.stationary = ((uint8_t)val & 0x02U) >> 1;
cparata	4:94c5d5546161	1805	ret = lis2dw12_write_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &wake_up_dur, 1);
cparata	4:94c5d5546161	1806	}
cparata	4:94c5d5546161	1807
cparata	4:94c5d5546161	1808	return ret;
cparata	0:dff8803aace7	1809	}
cparata	0:dff8803aace7	1810
cparata	0:dff8803aace7	1811	/**
cparata	4:94c5d5546161	1812	* @brief Config activity / inactivity or
cparata	2:a94816b14e3d	1813	* stationary / motion detection. [get]
cparata	0:dff8803aace7	1814	*
cparata	2:a94816b14e3d	1815	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1816	* @param val Get the values of sleep_on in reg WAKE_UP_THS
cparata	2:a94816b14e3d	1817	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1818	*
cparata	0:dff8803aace7	1819	*/
cparata	0:dff8803aace7	1820	int32_t lis2dw12_act_mode_get(lis2dw12_ctx_t ctx, lis2dw12_sleep_on_t val)
cparata	0:dff8803aace7	1821	{
cparata	4:94c5d5546161	1822	lis2dw12_wake_up_ths_t wake_up_ths;
cparata	4:94c5d5546161	1823	lis2dw12_wake_up_dur_t wake_up_dur;;
cparata	4:94c5d5546161	1824	int32_t ret;
cparata	2:a94816b14e3d	1825
cparata	4:94c5d5546161	1826	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_THS, (uint8_t *) &wake_up_ths, 1);
cparata	4:94c5d5546161	1827	if (ret == 0) {
cparata	4:94c5d5546161	1828	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &wake_up_dur, 1);
cparata	0:dff8803aace7	1829
cparata	4:94c5d5546161	1830	switch ((wake_up_dur.stationary << 1) + wake_up_ths.sleep_on) {
cparata	4:94c5d5546161	1831	case LIS2DW12_NO_DETECTION:
cparata	4:94c5d5546161	1832	*val = LIS2DW12_NO_DETECTION;
cparata	4:94c5d5546161	1833	break;
cparata	4:94c5d5546161	1834	case LIS2DW12_DETECT_ACT_INACT:
cparata	4:94c5d5546161	1835	*val = LIS2DW12_DETECT_ACT_INACT;
cparata	4:94c5d5546161	1836	break;
cparata	4:94c5d5546161	1837	case LIS2DW12_DETECT_STAT_MOTION:
cparata	4:94c5d5546161	1838	*val = LIS2DW12_DETECT_STAT_MOTION;
cparata	4:94c5d5546161	1839	break;
cparata	4:94c5d5546161	1840	default:
cparata	4:94c5d5546161	1841	*val = LIS2DW12_NO_DETECTION;
cparata	4:94c5d5546161	1842	break;
cparata	4:94c5d5546161	1843	}
cparata	2:a94816b14e3d	1844	}
cparata	4:94c5d5546161	1845	return ret;
cparata	0:dff8803aace7	1846	}
cparata	0:dff8803aace7	1847
cparata	0:dff8803aace7	1848	/**
cparata	2:a94816b14e3d	1849	* @brief Duration to go in sleep mode (1 LSb = 512 / ODR).[set]
cparata	0:dff8803aace7	1850	*
cparata	2:a94816b14e3d	1851	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1852	* @param val change the values of sleep_dur in reg WAKE_UP_DUR
cparata	2:a94816b14e3d	1853	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1854	*
cparata	0:dff8803aace7	1855	*/
cparata	0:dff8803aace7	1856	int32_t lis2dw12_act_sleep_dur_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	1857	{
cparata	4:94c5d5546161	1858	lis2dw12_wake_up_dur_t reg;
cparata	4:94c5d5546161	1859	int32_t ret;
cparata	0:dff8803aace7	1860
cparata	4:94c5d5546161	1861	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1862	if (ret == 0) {
cparata	4:94c5d5546161	1863	reg.sleep_dur = val;
cparata	4:94c5d5546161	1864	ret = lis2dw12_write_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1865	}
cparata	4:94c5d5546161	1866	return ret;
cparata	0:dff8803aace7	1867	}
cparata	0:dff8803aace7	1868
cparata	0:dff8803aace7	1869	/**
cparata	2:a94816b14e3d	1870	* @brief Duration to go in sleep mode (1 LSb = 512 / ODR).[get]
cparata	0:dff8803aace7	1871	*
cparata	2:a94816b14e3d	1872	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1873	* @param val change the values of sleep_dur in reg WAKE_UP_DUR
cparata	2:a94816b14e3d	1874	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1875	*
cparata	0:dff8803aace7	1876	*/
cparata	0:dff8803aace7	1877	int32_t lis2dw12_act_sleep_dur_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	1878	{
cparata	4:94c5d5546161	1879	lis2dw12_wake_up_dur_t reg;
cparata	4:94c5d5546161	1880	int32_t ret;
cparata	0:dff8803aace7	1881
cparata	4:94c5d5546161	1882	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1883	*val = reg.sleep_dur;
cparata	0:dff8803aace7	1884
cparata	4:94c5d5546161	1885	return ret;
cparata	0:dff8803aace7	1886	}
cparata	0:dff8803aace7	1887
cparata	0:dff8803aace7	1888	/**
cparata	0:dff8803aace7	1889	* @}
cparata	2:a94816b14e3d	1890	*
cparata	0:dff8803aace7	1891	*/
cparata	0:dff8803aace7	1892
cparata	0:dff8803aace7	1893	/**
cparata	2:a94816b14e3d	1894	* @defgroup LIS2DW12_Tap_Generator
cparata	2:a94816b14e3d	1895	* @brief This section groups all the functions that manage the tap
cparata	2:a94816b14e3d	1896	* and double tap event generation.
cparata	0:dff8803aace7	1897	* @{
cparata	2:a94816b14e3d	1898	*
cparata	0:dff8803aace7	1899	*/
cparata	0:dff8803aace7	1900
cparata	0:dff8803aace7	1901	/**
cparata	2:a94816b14e3d	1902	* @brief Threshold for tap recognition.[set]
cparata	0:dff8803aace7	1903	*
cparata	2:a94816b14e3d	1904	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1905	* @param val change the values of tap_thsx in reg TAP_THS_X
cparata	2:a94816b14e3d	1906	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1907	*
cparata	0:dff8803aace7	1908	*/
cparata	0:dff8803aace7	1909	int32_t lis2dw12_tap_threshold_x_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	1910	{
cparata	4:94c5d5546161	1911	lis2dw12_tap_ths_x_t reg;
cparata	4:94c5d5546161	1912	int32_t ret;
cparata	0:dff8803aace7	1913
cparata	4:94c5d5546161	1914	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_X, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1915	if (ret == 0) {
cparata	4:94c5d5546161	1916	reg.tap_thsx = val;
cparata	4:94c5d5546161	1917	ret = lis2dw12_write_reg(ctx, LIS2DW12_TAP_THS_X, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1918	}
cparata	4:94c5d5546161	1919	return ret;
cparata	0:dff8803aace7	1920	}
cparata	0:dff8803aace7	1921
cparata	0:dff8803aace7	1922	/**
cparata	2:a94816b14e3d	1923	* @brief Threshold for tap recognition.[get]
cparata	0:dff8803aace7	1924	*
cparata	2:a94816b14e3d	1925	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1926	* @param val change the values of tap_thsx in reg TAP_THS_X
cparata	2:a94816b14e3d	1927	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1928	*
cparata	0:dff8803aace7	1929	*/
cparata	0:dff8803aace7	1930	int32_t lis2dw12_tap_threshold_x_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	1931	{
cparata	4:94c5d5546161	1932	lis2dw12_tap_ths_x_t reg;
cparata	4:94c5d5546161	1933	int32_t ret;
cparata	0:dff8803aace7	1934
cparata	4:94c5d5546161	1935	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_X, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1936	*val = reg.tap_thsx;
cparata	0:dff8803aace7	1937
cparata	4:94c5d5546161	1938	return ret;
cparata	0:dff8803aace7	1939	}
cparata	0:dff8803aace7	1940
cparata	0:dff8803aace7	1941	/**
cparata	2:a94816b14e3d	1942	* @brief Threshold for tap recognition.[set]
cparata	0:dff8803aace7	1943	*
cparata	2:a94816b14e3d	1944	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1945	* @param val change the values of tap_thsy in reg TAP_THS_Y
cparata	2:a94816b14e3d	1946	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1947	*
cparata	0:dff8803aace7	1948	*/
cparata	0:dff8803aace7	1949	int32_t lis2dw12_tap_threshold_y_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	1950	{
cparata	4:94c5d5546161	1951	lis2dw12_tap_ths_y_t reg;
cparata	4:94c5d5546161	1952	int32_t ret;
cparata	0:dff8803aace7	1953
cparata	4:94c5d5546161	1954	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Y, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1955	if (ret == 0) {
cparata	4:94c5d5546161	1956	reg.tap_thsy = val;
cparata	4:94c5d5546161	1957	ret = lis2dw12_write_reg(ctx, LIS2DW12_TAP_THS_Y, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1958	}
cparata	4:94c5d5546161	1959	return ret;
cparata	0:dff8803aace7	1960	}
cparata	0:dff8803aace7	1961
cparata	0:dff8803aace7	1962	/**
cparata	2:a94816b14e3d	1963	* @brief Threshold for tap recognition.[get]
cparata	0:dff8803aace7	1964	*
cparata	2:a94816b14e3d	1965	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1966	* @param val change the values of tap_thsy in reg TAP_THS_Y
cparata	2:a94816b14e3d	1967	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1968	*
cparata	0:dff8803aace7	1969	*/
cparata	0:dff8803aace7	1970	int32_t lis2dw12_tap_threshold_y_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	1971	{
cparata	4:94c5d5546161	1972	lis2dw12_tap_ths_y_t reg;
cparata	4:94c5d5546161	1973	int32_t ret;
cparata	0:dff8803aace7	1974
cparata	4:94c5d5546161	1975	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Y, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1976	*val = reg.tap_thsy;
cparata	0:dff8803aace7	1977
cparata	4:94c5d5546161	1978	return ret;
cparata	0:dff8803aace7	1979	}
cparata	0:dff8803aace7	1980
cparata	0:dff8803aace7	1981	/**
cparata	2:a94816b14e3d	1982	* @brief Selection of axis priority for TAP detection.[set]
cparata	0:dff8803aace7	1983	*
cparata	2:a94816b14e3d	1984	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	1985	* @param val change the values of tap_prior in reg TAP_THS_Y
cparata	2:a94816b14e3d	1986	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	1987	*
cparata	0:dff8803aace7	1988	*/
cparata	0:dff8803aace7	1989	int32_t lis2dw12_tap_axis_priority_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	1990	lis2dw12_tap_prior_t val)
cparata	0:dff8803aace7	1991	{
cparata	4:94c5d5546161	1992	lis2dw12_tap_ths_y_t reg;
cparata	4:94c5d5546161	1993	int32_t ret;
cparata	0:dff8803aace7	1994
cparata	4:94c5d5546161	1995	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Y, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1996	if (ret == 0) {
cparata	4:94c5d5546161	1997	reg.tap_prior = (uint8_t) val;
cparata	4:94c5d5546161	1998	ret = lis2dw12_write_reg(ctx, LIS2DW12_TAP_THS_Y, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	1999	}
cparata	4:94c5d5546161	2000	return ret;
cparata	0:dff8803aace7	2001	}
cparata	0:dff8803aace7	2002
cparata	0:dff8803aace7	2003	/**
cparata	2:a94816b14e3d	2004	* @brief Selection of axis priority for TAP detection.[get]
cparata	0:dff8803aace7	2005	*
cparata	2:a94816b14e3d	2006	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2007	* @param val Get the values of tap_prior in reg TAP_THS_Y
cparata	2:a94816b14e3d	2008	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2009	*
cparata	0:dff8803aace7	2010	*/
cparata	0:dff8803aace7	2011	int32_t lis2dw12_tap_axis_priority_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	2012	lis2dw12_tap_prior_t *val)
cparata	0:dff8803aace7	2013	{
cparata	4:94c5d5546161	2014	lis2dw12_tap_ths_y_t reg;
cparata	4:94c5d5546161	2015	int32_t ret;
cparata	2:a94816b14e3d	2016
cparata	4:94c5d5546161	2017	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Y, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	2018
cparata	4:94c5d5546161	2019	switch (reg.tap_prior) {
cparata	4:94c5d5546161	2020	case LIS2DW12_XYZ:
cparata	4:94c5d5546161	2021	*val = LIS2DW12_XYZ;
cparata	4:94c5d5546161	2022	break;
cparata	4:94c5d5546161	2023	case LIS2DW12_YXZ:
cparata	4:94c5d5546161	2024	*val = LIS2DW12_YXZ;
cparata	4:94c5d5546161	2025	break;
cparata	4:94c5d5546161	2026	case LIS2DW12_XZY:
cparata	4:94c5d5546161	2027	*val = LIS2DW12_XZY;
cparata	4:94c5d5546161	2028	break;
cparata	4:94c5d5546161	2029	case LIS2DW12_ZYX:
cparata	4:94c5d5546161	2030	*val = LIS2DW12_ZYX;
cparata	4:94c5d5546161	2031	break;
cparata	4:94c5d5546161	2032	case LIS2DW12_YZX:
cparata	4:94c5d5546161	2033	*val = LIS2DW12_YZX;
cparata	4:94c5d5546161	2034	break;
cparata	4:94c5d5546161	2035	case LIS2DW12_ZXY:
cparata	4:94c5d5546161	2036	*val = LIS2DW12_ZXY;
cparata	4:94c5d5546161	2037	break;
cparata	4:94c5d5546161	2038	default:
cparata	4:94c5d5546161	2039	*val = LIS2DW12_XYZ;
cparata	4:94c5d5546161	2040	break;
cparata	4:94c5d5546161	2041	}
cparata	4:94c5d5546161	2042	return ret;
cparata	0:dff8803aace7	2043	}
cparata	0:dff8803aace7	2044
cparata	0:dff8803aace7	2045	/**
cparata	2:a94816b14e3d	2046	* @brief Threshold for tap recognition.[set]
cparata	0:dff8803aace7	2047	*
cparata	2:a94816b14e3d	2048	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2049	* @param val change the values of tap_thsz in reg TAP_THS_Z
cparata	2:a94816b14e3d	2050	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2051	*
cparata	0:dff8803aace7	2052	*/
cparata	0:dff8803aace7	2053	int32_t lis2dw12_tap_threshold_z_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2054	{
cparata	4:94c5d5546161	2055	lis2dw12_tap_ths_z_t reg;
cparata	4:94c5d5546161	2056	int32_t ret;
cparata	0:dff8803aace7	2057
cparata	4:94c5d5546161	2058	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2059	if (ret == 0) {
cparata	4:94c5d5546161	2060	reg.tap_thsz = val;
cparata	4:94c5d5546161	2061	ret = lis2dw12_write_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2062	}
cparata	0:dff8803aace7	2063
cparata	4:94c5d5546161	2064	return ret;
cparata	0:dff8803aace7	2065	}
cparata	0:dff8803aace7	2066
cparata	0:dff8803aace7	2067	/**
cparata	2:a94816b14e3d	2068	* @brief Threshold for tap recognition.[get]
cparata	0:dff8803aace7	2069	*
cparata	2:a94816b14e3d	2070	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2071	* @param val change the values of tap_thsz in reg TAP_THS_Z
cparata	2:a94816b14e3d	2072	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2073	*
cparata	0:dff8803aace7	2074	*/
cparata	0:dff8803aace7	2075	int32_t lis2dw12_tap_threshold_z_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2076	{
cparata	4:94c5d5546161	2077	lis2dw12_tap_ths_z_t reg;
cparata	4:94c5d5546161	2078	int32_t ret;
cparata	0:dff8803aace7	2079
cparata	4:94c5d5546161	2080	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2081	*val = reg.tap_thsz;
cparata	0:dff8803aace7	2082
cparata	4:94c5d5546161	2083	return ret;
cparata	0:dff8803aace7	2084	}
cparata	0:dff8803aace7	2085
cparata	0:dff8803aace7	2086	/**
cparata	2:a94816b14e3d	2087	* @brief Enable Z direction in tap recognition.[set]
cparata	0:dff8803aace7	2088	*
cparata	2:a94816b14e3d	2089	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2090	* @param val change the values of tap_z_en in reg TAP_THS_Z
cparata	2:a94816b14e3d	2091	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2092	*
cparata	0:dff8803aace7	2093	*/
cparata	0:dff8803aace7	2094	int32_t lis2dw12_tap_detection_on_z_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2095	{
cparata	4:94c5d5546161	2096	lis2dw12_tap_ths_z_t reg;
cparata	4:94c5d5546161	2097	int32_t ret;
cparata	0:dff8803aace7	2098
cparata	4:94c5d5546161	2099	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2100	if (ret == 0) {
cparata	4:94c5d5546161	2101	reg.tap_z_en = val;
cparata	4:94c5d5546161	2102	ret = lis2dw12_write_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2103	}
cparata	4:94c5d5546161	2104	return ret;
cparata	0:dff8803aace7	2105	}
cparata	0:dff8803aace7	2106
cparata	0:dff8803aace7	2107	/**
cparata	2:a94816b14e3d	2108	* @brief Enable Z direction in tap recognition.[get]
cparata	0:dff8803aace7	2109	*
cparata	2:a94816b14e3d	2110	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2111	* @param val change the values of tap_z_en in reg TAP_THS_Z
cparata	2:a94816b14e3d	2112	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2113	*
cparata	0:dff8803aace7	2114	*/
cparata	0:dff8803aace7	2115	int32_t lis2dw12_tap_detection_on_z_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2116	{
cparata	4:94c5d5546161	2117	lis2dw12_tap_ths_z_t reg;
cparata	4:94c5d5546161	2118	int32_t ret;
cparata	0:dff8803aace7	2119
cparata	4:94c5d5546161	2120	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2121	*val = reg.tap_z_en;
cparata	0:dff8803aace7	2122
cparata	4:94c5d5546161	2123	return ret;
cparata	0:dff8803aace7	2124	}
cparata	0:dff8803aace7	2125
cparata	0:dff8803aace7	2126	/**
cparata	2:a94816b14e3d	2127	* @brief Enable Y direction in tap recognition.[set]
cparata	0:dff8803aace7	2128	*
cparata	2:a94816b14e3d	2129	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2130	* @param val change the values of tap_y_en in reg TAP_THS_Z
cparata	2:a94816b14e3d	2131	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2132	*
cparata	0:dff8803aace7	2133	*/
cparata	0:dff8803aace7	2134	int32_t lis2dw12_tap_detection_on_y_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2135	{
cparata	4:94c5d5546161	2136	lis2dw12_tap_ths_z_t reg;
cparata	4:94c5d5546161	2137	int32_t ret;
cparata	0:dff8803aace7	2138
cparata	4:94c5d5546161	2139	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2140	if (ret == 0) {
cparata	4:94c5d5546161	2141	reg.tap_y_en = val;
cparata	4:94c5d5546161	2142	ret = lis2dw12_write_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2143	}
cparata	4:94c5d5546161	2144	return ret;
cparata	0:dff8803aace7	2145	}
cparata	0:dff8803aace7	2146
cparata	0:dff8803aace7	2147	/**
cparata	2:a94816b14e3d	2148	* @brief Enable Y direction in tap recognition.[get]
cparata	0:dff8803aace7	2149	*
cparata	2:a94816b14e3d	2150	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2151	* @param val change the values of tap_y_en in reg TAP_THS_Z
cparata	2:a94816b14e3d	2152	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2153	*
cparata	0:dff8803aace7	2154	*/
cparata	0:dff8803aace7	2155	int32_t lis2dw12_tap_detection_on_y_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2156	{
cparata	4:94c5d5546161	2157	lis2dw12_tap_ths_z_t reg;
cparata	4:94c5d5546161	2158	int32_t ret;
cparata	0:dff8803aace7	2159
cparata	4:94c5d5546161	2160	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2161	*val = reg.tap_y_en;
cparata	0:dff8803aace7	2162
cparata	4:94c5d5546161	2163	return ret;
cparata	0:dff8803aace7	2164	}
cparata	0:dff8803aace7	2165
cparata	0:dff8803aace7	2166	/**
cparata	2:a94816b14e3d	2167	* @brief Enable X direction in tap recognition.[set]
cparata	0:dff8803aace7	2168	*
cparata	2:a94816b14e3d	2169	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2170	* @param val change the values of tap_x_en in reg TAP_THS_Z
cparata	2:a94816b14e3d	2171	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2172	*
cparata	0:dff8803aace7	2173	*/
cparata	0:dff8803aace7	2174	int32_t lis2dw12_tap_detection_on_x_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2175	{
cparata	4:94c5d5546161	2176	lis2dw12_tap_ths_z_t reg;
cparata	4:94c5d5546161	2177	int32_t ret;
cparata	0:dff8803aace7	2178
cparata	4:94c5d5546161	2179	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2180	if (ret == 0) {
cparata	4:94c5d5546161	2181	reg.tap_x_en = val;
cparata	4:94c5d5546161	2182	ret = lis2dw12_write_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2183	}
cparata	4:94c5d5546161	2184	return ret;
cparata	0:dff8803aace7	2185	}
cparata	0:dff8803aace7	2186
cparata	0:dff8803aace7	2187	/**
cparata	2:a94816b14e3d	2188	* @brief Enable X direction in tap recognition.[get]
cparata	0:dff8803aace7	2189	*
cparata	2:a94816b14e3d	2190	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2191	* @param val change the values of tap_x_en in reg TAP_THS_Z
cparata	2:a94816b14e3d	2192	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2193	*
cparata	0:dff8803aace7	2194	*/
cparata	0:dff8803aace7	2195	int32_t lis2dw12_tap_detection_on_x_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2196	{
cparata	4:94c5d5546161	2197	lis2dw12_tap_ths_z_t reg;
cparata	4:94c5d5546161	2198	int32_t ret;
cparata	0:dff8803aace7	2199
cparata	4:94c5d5546161	2200	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_Z, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2201	*val = reg.tap_x_en;
cparata	0:dff8803aace7	2202
cparata	4:94c5d5546161	2203	return ret;
cparata	0:dff8803aace7	2204	}
cparata	0:dff8803aace7	2205
cparata	0:dff8803aace7	2206	/**
cparata	2:a94816b14e3d	2207	* @brief Maximum duration is the maximum time of an overthreshold signal
cparata	2:a94816b14e3d	2208	* detection to be recognized as a tap event. The default value
cparata	2:a94816b14e3d	2209	* of these bits is 00b which corresponds to 4*ODR_XL time.
cparata	2:a94816b14e3d	2210	* If the SHOCK[1:0] bits are set to a different value, 1LSB
cparata	2:a94816b14e3d	2211	* corresponds to 8*ODR_XL time.[set]
cparata	0:dff8803aace7	2212	*
cparata	2:a94816b14e3d	2213	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2214	* @param val change the values of shock in reg INT_DUR
cparata	2:a94816b14e3d	2215	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2216	*
cparata	0:dff8803aace7	2217	*/
cparata	0:dff8803aace7	2218	int32_t lis2dw12_tap_shock_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2219	{
cparata	4:94c5d5546161	2220	lis2dw12_int_dur_t reg;
cparata	4:94c5d5546161	2221	int32_t ret;
cparata	0:dff8803aace7	2222
cparata	4:94c5d5546161	2223	ret = lis2dw12_read_reg(ctx, LIS2DW12_INT_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2224	if (ret == 0) {
cparata	4:94c5d5546161	2225	reg.shock = val;
cparata	4:94c5d5546161	2226	ret = lis2dw12_write_reg(ctx, LIS2DW12_INT_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2227	}
cparata	0:dff8803aace7	2228
cparata	4:94c5d5546161	2229	return ret;
cparata	0:dff8803aace7	2230	}
cparata	0:dff8803aace7	2231
cparata	0:dff8803aace7	2232	/**
cparata	2:a94816b14e3d	2233	* @brief Maximum duration is the maximum time of an overthreshold signal
cparata	2:a94816b14e3d	2234	* detection to be recognized as a tap event. The default value
cparata	2:a94816b14e3d	2235	* of these bits is 00b which corresponds to 4*ODR_XL time.
cparata	2:a94816b14e3d	2236	* If the SHOCK[1:0] bits are set to a different value, 1LSB
cparata	2:a94816b14e3d	2237	* corresponds to 8*ODR_XL time.[get]
cparata	0:dff8803aace7	2238	*
cparata	2:a94816b14e3d	2239	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2240	* @param val change the values of shock in reg INT_DUR
cparata	2:a94816b14e3d	2241	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2242	*
cparata	0:dff8803aace7	2243	*/
cparata	0:dff8803aace7	2244	int32_t lis2dw12_tap_shock_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2245	{
cparata	4:94c5d5546161	2246	lis2dw12_int_dur_t reg;
cparata	4:94c5d5546161	2247	int32_t ret;
cparata	0:dff8803aace7	2248
cparata	4:94c5d5546161	2249	ret = lis2dw12_read_reg(ctx, LIS2DW12_INT_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2250	*val = reg.shock;
cparata	0:dff8803aace7	2251
cparata	4:94c5d5546161	2252	return ret;
cparata	0:dff8803aace7	2253	}
cparata	0:dff8803aace7	2254
cparata	0:dff8803aace7	2255	/**
cparata	4:94c5d5546161	2256	* @brief Quiet time is the time after the first detected tap in which
cparata	2:a94816b14e3d	2257	* there must not be any overthreshold event.
cparata	4:94c5d5546161	2258	* The default value of these bits is 00b which corresponds
cparata	2:a94816b14e3d	2259	* to 2*ODR_XL time. If the QUIET[1:0] bits are set to a different
cparata	2:a94816b14e3d	2260	* value, 1LSB corresponds to 4*ODR_XL time.[set]
cparata	0:dff8803aace7	2261	*
cparata	2:a94816b14e3d	2262	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2263	* @param val change the values of quiet in reg INT_DUR
cparata	2:a94816b14e3d	2264	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2265	*
cparata	0:dff8803aace7	2266	*/
cparata	0:dff8803aace7	2267	int32_t lis2dw12_tap_quiet_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2268	{
cparata	4:94c5d5546161	2269	lis2dw12_int_dur_t reg;
cparata	4:94c5d5546161	2270	int32_t ret;
cparata	0:dff8803aace7	2271
cparata	4:94c5d5546161	2272	ret = lis2dw12_read_reg(ctx, LIS2DW12_INT_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2273	if (ret == 0) {
cparata	4:94c5d5546161	2274	reg.quiet = val;
cparata	4:94c5d5546161	2275	ret = lis2dw12_write_reg(ctx, LIS2DW12_INT_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2276	}
cparata	4:94c5d5546161	2277	return ret;
cparata	0:dff8803aace7	2278	}
cparata	0:dff8803aace7	2279
cparata	0:dff8803aace7	2280	/**
cparata	4:94c5d5546161	2281	* @brief Quiet time is the time after the first detected tap in which
cparata	2:a94816b14e3d	2282	* there must not be any overthreshold event.
cparata	4:94c5d5546161	2283	* The default value of these bits is 00b which corresponds
cparata	2:a94816b14e3d	2284	* to 2*ODR_XL time. If the QUIET[1:0] bits are set to a different
cparata	2:a94816b14e3d	2285	* value, 1LSB corresponds to 4*ODR_XL time.[get]
cparata	0:dff8803aace7	2286	*
cparata	2:a94816b14e3d	2287	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2288	* @param val change the values of quiet in reg INT_DUR
cparata	2:a94816b14e3d	2289	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2290	*
cparata	0:dff8803aace7	2291	*/
cparata	0:dff8803aace7	2292	int32_t lis2dw12_tap_quiet_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2293	{
cparata	4:94c5d5546161	2294	lis2dw12_int_dur_t reg;
cparata	4:94c5d5546161	2295	int32_t ret;
cparata	0:dff8803aace7	2296
cparata	4:94c5d5546161	2297	ret = lis2dw12_read_reg(ctx, LIS2DW12_INT_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2298	*val = reg.quiet;
cparata	0:dff8803aace7	2299
cparata	4:94c5d5546161	2300	return ret;
cparata	0:dff8803aace7	2301	}
cparata	0:dff8803aace7	2302
cparata	0:dff8803aace7	2303	/**
cparata	4:94c5d5546161	2304	* @brief When double tap recognition is enabled, this register expresses
cparata	4:94c5d5546161	2305	* the maximum time between two consecutive detected taps to
cparata	2:a94816b14e3d	2306	* determine a double tap event.
cparata	4:94c5d5546161	2307	* The default value of these bits is 0000b which corresponds
cparata	4:94c5d5546161	2308	* to 16*ODR_XL time. If the DUR[3:0] bits are set to a different
cparata	2:a94816b14e3d	2309	* value, 1LSB corresponds to 32*ODR_XL time.[set]
cparata	0:dff8803aace7	2310	*
cparata	2:a94816b14e3d	2311	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2312	* @param val change the values of latency in reg INT_DUR
cparata	2:a94816b14e3d	2313	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2314	*
cparata	0:dff8803aace7	2315	*/
cparata	0:dff8803aace7	2316	int32_t lis2dw12_tap_dur_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2317	{
cparata	4:94c5d5546161	2318	lis2dw12_int_dur_t reg;
cparata	4:94c5d5546161	2319	int32_t ret;
cparata	0:dff8803aace7	2320
cparata	4:94c5d5546161	2321	ret = lis2dw12_read_reg(ctx, LIS2DW12_INT_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2322	if (ret == 0) {
cparata	4:94c5d5546161	2323	reg.latency = val;
cparata	4:94c5d5546161	2324	ret = lis2dw12_write_reg(ctx, LIS2DW12_INT_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2325	}
cparata	4:94c5d5546161	2326	return ret;
cparata	0:dff8803aace7	2327	}
cparata	0:dff8803aace7	2328
cparata	0:dff8803aace7	2329	/**
cparata	4:94c5d5546161	2330	* @brief When double tap recognition is enabled, this register expresses
cparata	4:94c5d5546161	2331	* the maximum time between two consecutive detected taps to
cparata	2:a94816b14e3d	2332	* determine a double tap event.
cparata	4:94c5d5546161	2333	* The default value of these bits is 0000b which corresponds
cparata	4:94c5d5546161	2334	* to 16*ODR_XL time. If the DUR[3:0] bits are set to a different
cparata	2:a94816b14e3d	2335	* value, 1LSB corresponds to 32*ODR_XL time.[get]
cparata	0:dff8803aace7	2336	*
cparata	2:a94816b14e3d	2337	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2338	* @param val change the values of latency in reg INT_DUR
cparata	2:a94816b14e3d	2339	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2340	*
cparata	0:dff8803aace7	2341	*/
cparata	0:dff8803aace7	2342	int32_t lis2dw12_tap_dur_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2343	{
cparata	4:94c5d5546161	2344	lis2dw12_int_dur_t reg;
cparata	4:94c5d5546161	2345	int32_t ret;
cparata	0:dff8803aace7	2346
cparata	4:94c5d5546161	2347	ret = lis2dw12_read_reg(ctx, LIS2DW12_INT_DUR, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2348	*val = reg.latency;
cparata	0:dff8803aace7	2349
cparata	4:94c5d5546161	2350	return ret;
cparata	0:dff8803aace7	2351	}
cparata	0:dff8803aace7	2352
cparata	0:dff8803aace7	2353	/**
cparata	2:a94816b14e3d	2354	* @brief Single/double-tap event enable.[set]
cparata	0:dff8803aace7	2355	*
cparata	2:a94816b14e3d	2356	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2357	* @param val change the values of single_double_tap in reg WAKE_UP_THS
cparata	2:a94816b14e3d	2358	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2359	*
cparata	0:dff8803aace7	2360	*/
cparata	0:dff8803aace7	2361	int32_t lis2dw12_tap_mode_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	2362	lis2dw12_single_double_tap_t val)
cparata	0:dff8803aace7	2363	{
cparata	4:94c5d5546161	2364	lis2dw12_wake_up_ths_t reg;
cparata	4:94c5d5546161	2365	int32_t ret;
cparata	0:dff8803aace7	2366
cparata	4:94c5d5546161	2367	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_THS, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2368	if (ret == 0) {
cparata	4:94c5d5546161	2369	reg.single_double_tap = (uint8_t) val;
cparata	4:94c5d5546161	2370	ret = lis2dw12_write_reg(ctx, LIS2DW12_WAKE_UP_THS, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2371	}
cparata	4:94c5d5546161	2372	return ret;
cparata	0:dff8803aace7	2373	}
cparata	0:dff8803aace7	2374
cparata	0:dff8803aace7	2375	/**
cparata	2:a94816b14e3d	2376	* @brief Single/double-tap event enable.[get]
cparata	0:dff8803aace7	2377	*
cparata	2:a94816b14e3d	2378	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2379	* @param val Get the values of single_double_tap in reg WAKE_UP_THS
cparata	2:a94816b14e3d	2380	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2381	*
cparata	0:dff8803aace7	2382	*/
cparata	0:dff8803aace7	2383	int32_t lis2dw12_tap_mode_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	2384	lis2dw12_single_double_tap_t *val)
cparata	0:dff8803aace7	2385	{
cparata	4:94c5d5546161	2386	lis2dw12_wake_up_ths_t reg;
cparata	4:94c5d5546161	2387	int32_t ret;
cparata	2:a94816b14e3d	2388
cparata	4:94c5d5546161	2389	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_THS, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	2390
cparata	4:94c5d5546161	2391	switch (reg.single_double_tap) {
cparata	4:94c5d5546161	2392	case LIS2DW12_ONLY_SINGLE:
cparata	4:94c5d5546161	2393	*val = LIS2DW12_ONLY_SINGLE;
cparata	4:94c5d5546161	2394	break;
cparata	4:94c5d5546161	2395	case LIS2DW12_BOTH_SINGLE_DOUBLE:
cparata	4:94c5d5546161	2396	*val = LIS2DW12_BOTH_SINGLE_DOUBLE;
cparata	4:94c5d5546161	2397	break;
cparata	4:94c5d5546161	2398	default:
cparata	4:94c5d5546161	2399	*val = LIS2DW12_ONLY_SINGLE;
cparata	4:94c5d5546161	2400	break;
cparata	4:94c5d5546161	2401	}
cparata	0:dff8803aace7	2402
cparata	4:94c5d5546161	2403	return ret;
cparata	0:dff8803aace7	2404	}
cparata	0:dff8803aace7	2405
cparata	0:dff8803aace7	2406	/**
cparata	2:a94816b14e3d	2407	* @brief Read the tap / double tap source register.[get]
cparata	0:dff8803aace7	2408	*
cparata	2:a94816b14e3d	2409	* @param ctx read / write interface definitions
cparata	4:94c5d5546161	2410	* @param lis2dw12_tap_src: union of registers from TAP_SRC to
cparata	2:a94816b14e3d	2411	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2412	*
cparata	0:dff8803aace7	2413	*/
cparata	0:dff8803aace7	2414	int32_t lis2dw12_tap_src_get(lis2dw12_ctx_t ctx, lis2dw12_tap_src_t val)
cparata	0:dff8803aace7	2415	{
cparata	4:94c5d5546161	2416	int32_t ret;
cparata	4:94c5d5546161	2417	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_SRC, (uint8_t *) val, 1);
cparata	4:94c5d5546161	2418	return ret;
cparata	0:dff8803aace7	2419	}
cparata	2:a94816b14e3d	2420
cparata	0:dff8803aace7	2421	/**
cparata	0:dff8803aace7	2422	* @}
cparata	2:a94816b14e3d	2423	*
cparata	0:dff8803aace7	2424	*/
cparata	0:dff8803aace7	2425
cparata	0:dff8803aace7	2426	/**
cparata	2:a94816b14e3d	2427	* @defgroup LIS2DW12_Six_Position_Detection(6D/4D)
cparata	2:a94816b14e3d	2428	* @brief This section groups all the functions concerning six
cparata	2:a94816b14e3d	2429	* position detection (6D).
cparata	0:dff8803aace7	2430	* @{
cparata	2:a94816b14e3d	2431	*
cparata	0:dff8803aace7	2432	*/
cparata	0:dff8803aace7	2433
cparata	0:dff8803aace7	2434	/**
cparata	4:94c5d5546161	2435	* @brief Threshold for 4D/6D function.[set]
cparata	0:dff8803aace7	2436	*
cparata	2:a94816b14e3d	2437	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2438	* @param val change the values of 6d_ths in reg TAP_THS_X
cparata	2:a94816b14e3d	2439	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2440	*
cparata	0:dff8803aace7	2441	*/
cparata	0:dff8803aace7	2442	int32_t lis2dw12_6d_threshold_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2443	{
cparata	4:94c5d5546161	2444	lis2dw12_tap_ths_x_t reg;
cparata	4:94c5d5546161	2445	int32_t ret;
cparata	0:dff8803aace7	2446
cparata	4:94c5d5546161	2447	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_X, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2448	if (ret == 0) {
cparata	4:94c5d5546161	2449	reg._6d_ths = val;
cparata	4:94c5d5546161	2450	ret = lis2dw12_write_reg(ctx, LIS2DW12_TAP_THS_X, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2451	}
cparata	4:94c5d5546161	2452	return ret;
cparata	0:dff8803aace7	2453	}
cparata	0:dff8803aace7	2454
cparata	0:dff8803aace7	2455	/**
cparata	2:a94816b14e3d	2456	* @brief Threshold for 4D/6D function.[get]
cparata	0:dff8803aace7	2457	*
cparata	2:a94816b14e3d	2458	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2459	* @param val change the values of 6d_ths in reg TAP_THS_X
cparata	2:a94816b14e3d	2460	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2461	*
cparata	0:dff8803aace7	2462	*/
cparata	0:dff8803aace7	2463	int32_t lis2dw12_6d_threshold_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2464	{
cparata	4:94c5d5546161	2465	lis2dw12_tap_ths_x_t reg;
cparata	4:94c5d5546161	2466	int32_t ret;
cparata	0:dff8803aace7	2467
cparata	4:94c5d5546161	2468	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_X, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2469	*val = reg._6d_ths;
cparata	0:dff8803aace7	2470
cparata	4:94c5d5546161	2471	return ret;
cparata	0:dff8803aace7	2472	}
cparata	0:dff8803aace7	2473
cparata	0:dff8803aace7	2474	/**
cparata	2:a94816b14e3d	2475	* @brief 4D orientation detection enable.[set]
cparata	0:dff8803aace7	2476	*
cparata	2:a94816b14e3d	2477	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2478	* @param val change the values of 4d_en in reg TAP_THS_X
cparata	2:a94816b14e3d	2479	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2480	*
cparata	0:dff8803aace7	2481	*/
cparata	0:dff8803aace7	2482	int32_t lis2dw12_4d_mode_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2483	{
cparata	4:94c5d5546161	2484	lis2dw12_tap_ths_x_t reg;
cparata	4:94c5d5546161	2485	int32_t ret;
cparata	0:dff8803aace7	2486
cparata	4:94c5d5546161	2487	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_X, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2488	if (ret == 0) {
cparata	4:94c5d5546161	2489	reg._4d_en = val;
cparata	4:94c5d5546161	2490	ret = lis2dw12_write_reg(ctx, LIS2DW12_TAP_THS_X, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2491	}
cparata	0:dff8803aace7	2492
cparata	4:94c5d5546161	2493	return ret;
cparata	0:dff8803aace7	2494	}
cparata	0:dff8803aace7	2495
cparata	0:dff8803aace7	2496	/**
cparata	2:a94816b14e3d	2497	* @brief 4D orientation detection enable.[get]
cparata	0:dff8803aace7	2498	*
cparata	2:a94816b14e3d	2499	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2500	* @param val change the values of 4d_en in reg TAP_THS_X
cparata	2:a94816b14e3d	2501	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2502	*
cparata	0:dff8803aace7	2503	*/
cparata	0:dff8803aace7	2504	int32_t lis2dw12_4d_mode_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2505	{
cparata	4:94c5d5546161	2506	lis2dw12_tap_ths_x_t reg;
cparata	4:94c5d5546161	2507	int32_t ret;
cparata	0:dff8803aace7	2508
cparata	4:94c5d5546161	2509	ret = lis2dw12_read_reg(ctx, LIS2DW12_TAP_THS_X, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2510	*val = reg._4d_en;
cparata	0:dff8803aace7	2511
cparata	4:94c5d5546161	2512	return ret;
cparata	0:dff8803aace7	2513	}
cparata	0:dff8803aace7	2514
cparata	0:dff8803aace7	2515	/**
cparata	2:a94816b14e3d	2516	* @brief Read the 6D tap source register.[get]
cparata	0:dff8803aace7	2517	*
cparata	2:a94816b14e3d	2518	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2519	* @param val union of registers from SIXD_SRC
cparata	2:a94816b14e3d	2520	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2521	*
cparata	0:dff8803aace7	2522	*/
cparata	0:dff8803aace7	2523	int32_t lis2dw12_6d_src_get(lis2dw12_ctx_t ctx, lis2dw12_sixd_src_t val)
cparata	0:dff8803aace7	2524	{
cparata	4:94c5d5546161	2525	int32_t ret;
cparata	4:94c5d5546161	2526	ret = lis2dw12_read_reg(ctx, LIS2DW12_SIXD_SRC, (uint8_t *) val, 1);
cparata	4:94c5d5546161	2527	return ret;
cparata	0:dff8803aace7	2528	}
cparata	0:dff8803aace7	2529	/**
cparata	2:a94816b14e3d	2530	* @brief Data sent to 6D interrupt function.[set]
cparata	0:dff8803aace7	2531	*
cparata	2:a94816b14e3d	2532	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2533	* @param val change the values of lpass_on6d in reg CTRL_REG7
cparata	2:a94816b14e3d	2534	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2535	*
cparata	0:dff8803aace7	2536	*/
cparata	0:dff8803aace7	2537	int32_t lis2dw12_6d_feed_data_set(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	2538	lis2dw12_lpass_on6d_t val)
cparata	0:dff8803aace7	2539	{
cparata	4:94c5d5546161	2540	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	2541	int32_t ret;
cparata	0:dff8803aace7	2542
cparata	4:94c5d5546161	2543	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2544	if (ret == 0) {
cparata	4:94c5d5546161	2545	reg.lpass_on6d = (uint8_t) val;
cparata	4:94c5d5546161	2546	ret = lis2dw12_write_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2547	}
cparata	4:94c5d5546161	2548	return ret;
cparata	0:dff8803aace7	2549	}
cparata	0:dff8803aace7	2550
cparata	0:dff8803aace7	2551	/**
cparata	2:a94816b14e3d	2552	* @brief Data sent to 6D interrupt function.[get]
cparata	0:dff8803aace7	2553	*
cparata	2:a94816b14e3d	2554	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2555	* @param val Get the values of lpass_on6d in reg CTRL_REG7
cparata	2:a94816b14e3d	2556	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2557	*
cparata	0:dff8803aace7	2558	*/
cparata	0:dff8803aace7	2559	int32_t lis2dw12_6d_feed_data_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	2560	lis2dw12_lpass_on6d_t *val)
cparata	0:dff8803aace7	2561	{
cparata	4:94c5d5546161	2562	lis2dw12_ctrl_reg7_t reg;
cparata	4:94c5d5546161	2563	int32_t ret;
cparata	2:a94816b14e3d	2564
cparata	4:94c5d5546161	2565	ret = lis2dw12_read_reg(ctx, LIS2DW12_CTRL_REG7, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	2566
cparata	4:94c5d5546161	2567	switch (reg.lpass_on6d) {
cparata	4:94c5d5546161	2568	case LIS2DW12_ODR_DIV_2_FEED:
cparata	4:94c5d5546161	2569	*val = LIS2DW12_ODR_DIV_2_FEED;
cparata	4:94c5d5546161	2570	break;
cparata	4:94c5d5546161	2571	case LIS2DW12_LPF2_FEED:
cparata	4:94c5d5546161	2572	*val = LIS2DW12_LPF2_FEED;
cparata	4:94c5d5546161	2573	break;
cparata	4:94c5d5546161	2574	default:
cparata	4:94c5d5546161	2575	*val = LIS2DW12_ODR_DIV_2_FEED;
cparata	4:94c5d5546161	2576	break;
cparata	4:94c5d5546161	2577	}
cparata	4:94c5d5546161	2578	return ret;
cparata	0:dff8803aace7	2579	}
cparata	0:dff8803aace7	2580
cparata	0:dff8803aace7	2581	/**
cparata	0:dff8803aace7	2582	* @}
cparata	2:a94816b14e3d	2583	*
cparata	0:dff8803aace7	2584	*/
cparata	0:dff8803aace7	2585
cparata	0:dff8803aace7	2586	/**
cparata	2:a94816b14e3d	2587	* @defgroup LIS2DW12_Free_Fall
cparata	2:a94816b14e3d	2588	* @brief This section group all the functions concerning
cparata	2:a94816b14e3d	2589	* the free fall detection.
cparata	0:dff8803aace7	2590	* @{
cparata	2:a94816b14e3d	2591	*
cparata	0:dff8803aace7	2592	*/
cparata	0:dff8803aace7	2593
cparata	0:dff8803aace7	2594	/**
cparata	2:a94816b14e3d	2595	* @brief Wake up duration event(1LSb = 1 / ODR).[set]
cparata	0:dff8803aace7	2596	*
cparata	2:a94816b14e3d	2597	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2598	* @param val change the values of ff_dur in reg
cparata	2:a94816b14e3d	2599	* WAKE_UP_DUR /F REE_FALL
cparata	2:a94816b14e3d	2600	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2601	*
cparata	0:dff8803aace7	2602	*/
cparata	0:dff8803aace7	2603	int32_t lis2dw12_ff_dur_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2604	{
cparata	4:94c5d5546161	2605	lis2dw12_wake_up_dur_t wake_up_dur;
cparata	4:94c5d5546161	2606	lis2dw12_free_fall_t free_fall;
cparata	4:94c5d5546161	2607	int32_t ret;
cparata	0:dff8803aace7	2608
cparata	4:94c5d5546161	2609	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &wake_up_dur, 1);
cparata	4:94c5d5546161	2610	if (ret == 0) {
cparata	4:94c5d5546161	2611	ret = lis2dw12_read_reg(ctx, LIS2DW12_FREE_FALL, (uint8_t *) &free_fall, 1);
cparata	4:94c5d5546161	2612	}
cparata	4:94c5d5546161	2613	if (ret == 0) {
cparata	4:94c5d5546161	2614	wake_up_dur.ff_dur = ((uint8_t) val & 0x20U) >> 5;
cparata	4:94c5d5546161	2615	free_fall.ff_dur = (uint8_t) val & 0x1FU;
cparata	4:94c5d5546161	2616	ret = lis2dw12_write_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &wake_up_dur, 1);
cparata	4:94c5d5546161	2617	}
cparata	4:94c5d5546161	2618	if (ret == 0) {
cparata	4:94c5d5546161	2619	ret = lis2dw12_write_reg(ctx, LIS2DW12_FREE_FALL, (uint8_t *) &free_fall, 1);
cparata	4:94c5d5546161	2620	}
cparata	4:94c5d5546161	2621
cparata	4:94c5d5546161	2622	return ret;
cparata	0:dff8803aace7	2623	}
cparata	0:dff8803aace7	2624
cparata	0:dff8803aace7	2625	/**
cparata	2:a94816b14e3d	2626	* @brief Wake up duration event(1LSb = 1 / ODR).[get]
cparata	0:dff8803aace7	2627	*
cparata	2:a94816b14e3d	2628	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2629	* @param val change the values of ff_dur in
cparata	4:94c5d5546161	2630	* reg WAKE_UP_DUR /F REE_FALL
cparata	2:a94816b14e3d	2631	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2632	*
cparata	0:dff8803aace7	2633	*/
cparata	0:dff8803aace7	2634	int32_t lis2dw12_ff_dur_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2635	{
cparata	4:94c5d5546161	2636	lis2dw12_wake_up_dur_t wake_up_dur;
cparata	4:94c5d5546161	2637	lis2dw12_free_fall_t free_fall;
cparata	4:94c5d5546161	2638	int32_t ret;
cparata	4:94c5d5546161	2639
cparata	4:94c5d5546161	2640	ret = lis2dw12_read_reg(ctx, LIS2DW12_WAKE_UP_DUR, (uint8_t *) &wake_up_dur, 1);
cparata	4:94c5d5546161	2641	if (ret == 0) {
cparata	4:94c5d5546161	2642	ret = lis2dw12_read_reg(ctx, LIS2DW12_FREE_FALL, (uint8_t *) &free_fall, 1);
cparata	4:94c5d5546161	2643	*val = (wake_up_dur.ff_dur << 5) + free_fall.ff_dur;
cparata	4:94c5d5546161	2644	}
cparata	4:94c5d5546161	2645	return ret;
cparata	0:dff8803aace7	2646	}
cparata	0:dff8803aace7	2647
cparata	0:dff8803aace7	2648	/**
cparata	2:a94816b14e3d	2649	* @brief Free fall threshold setting.[set]
cparata	0:dff8803aace7	2650	*
cparata	2:a94816b14e3d	2651	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2652	* @param val change the values of ff_ths in reg FREE_FALL
cparata	2:a94816b14e3d	2653	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2654	*
cparata	0:dff8803aace7	2655	*/
cparata	0:dff8803aace7	2656	int32_t lis2dw12_ff_threshold_set(lis2dw12_ctx_t *ctx, lis2dw12_ff_ths_t val)
cparata	0:dff8803aace7	2657	{
cparata	4:94c5d5546161	2658	lis2dw12_free_fall_t reg;
cparata	4:94c5d5546161	2659	int32_t ret;
cparata	0:dff8803aace7	2660
cparata	4:94c5d5546161	2661	ret = lis2dw12_read_reg(ctx, LIS2DW12_FREE_FALL, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2662	if (ret == 0) {
cparata	4:94c5d5546161	2663	reg.ff_ths = (uint8_t) val;
cparata	4:94c5d5546161	2664	ret = lis2dw12_write_reg(ctx, LIS2DW12_FREE_FALL, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2665	}
cparata	0:dff8803aace7	2666
cparata	4:94c5d5546161	2667	return ret;
cparata	0:dff8803aace7	2668	}
cparata	0:dff8803aace7	2669
cparata	0:dff8803aace7	2670	/**
cparata	2:a94816b14e3d	2671	* @brief Free fall threshold setting.[get]
cparata	0:dff8803aace7	2672	*
cparata	2:a94816b14e3d	2673	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2674	* @param val Get the values of ff_ths in reg FREE_FALL
cparata	2:a94816b14e3d	2675	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2676	*
cparata	0:dff8803aace7	2677	*/
cparata	0:dff8803aace7	2678	int32_t lis2dw12_ff_threshold_get(lis2dw12_ctx_t *ctx,
cparata	0:dff8803aace7	2679	lis2dw12_ff_ths_t *val)
cparata	0:dff8803aace7	2680	{
cparata	4:94c5d5546161	2681	lis2dw12_free_fall_t reg;
cparata	4:94c5d5546161	2682	int32_t ret;
cparata	2:a94816b14e3d	2683
cparata	4:94c5d5546161	2684	ret = lis2dw12_read_reg(ctx, LIS2DW12_FREE_FALL, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	2685
cparata	4:94c5d5546161	2686	switch (reg.ff_ths) {
cparata	4:94c5d5546161	2687	case LIS2DW12_FF_TSH_5LSb_FS2g:
cparata	4:94c5d5546161	2688	*val = LIS2DW12_FF_TSH_5LSb_FS2g;
cparata	4:94c5d5546161	2689	break;
cparata	4:94c5d5546161	2690	case LIS2DW12_FF_TSH_7LSb_FS2g:
cparata	4:94c5d5546161	2691	*val = LIS2DW12_FF_TSH_7LSb_FS2g;
cparata	4:94c5d5546161	2692	break;
cparata	4:94c5d5546161	2693	case LIS2DW12_FF_TSH_8LSb_FS2g:
cparata	4:94c5d5546161	2694	*val = LIS2DW12_FF_TSH_8LSb_FS2g;
cparata	4:94c5d5546161	2695	break;
cparata	4:94c5d5546161	2696	case LIS2DW12_FF_TSH_10LSb_FS2g:
cparata	4:94c5d5546161	2697	*val = LIS2DW12_FF_TSH_10LSb_FS2g;
cparata	4:94c5d5546161	2698	break;
cparata	4:94c5d5546161	2699	case LIS2DW12_FF_TSH_11LSb_FS2g:
cparata	4:94c5d5546161	2700	*val = LIS2DW12_FF_TSH_11LSb_FS2g;
cparata	4:94c5d5546161	2701	break;
cparata	4:94c5d5546161	2702	case LIS2DW12_FF_TSH_13LSb_FS2g:
cparata	4:94c5d5546161	2703	*val = LIS2DW12_FF_TSH_13LSb_FS2g;
cparata	4:94c5d5546161	2704	break;
cparata	4:94c5d5546161	2705	case LIS2DW12_FF_TSH_15LSb_FS2g:
cparata	4:94c5d5546161	2706	*val = LIS2DW12_FF_TSH_15LSb_FS2g;
cparata	4:94c5d5546161	2707	break;
cparata	4:94c5d5546161	2708	case LIS2DW12_FF_TSH_16LSb_FS2g:
cparata	4:94c5d5546161	2709	*val = LIS2DW12_FF_TSH_16LSb_FS2g;
cparata	4:94c5d5546161	2710	break;
cparata	4:94c5d5546161	2711	default:
cparata	4:94c5d5546161	2712	*val = LIS2DW12_FF_TSH_5LSb_FS2g;
cparata	4:94c5d5546161	2713	break;
cparata	4:94c5d5546161	2714	}
cparata	4:94c5d5546161	2715	return ret;
cparata	0:dff8803aace7	2716	}
cparata	0:dff8803aace7	2717
cparata	0:dff8803aace7	2718	/**
cparata	0:dff8803aace7	2719	* @}
cparata	2:a94816b14e3d	2720	*
cparata	0:dff8803aace7	2721	*/
cparata	0:dff8803aace7	2722
cparata	0:dff8803aace7	2723	/**
cparata	2:a94816b14e3d	2724	* @defgroup LIS2DW12_Fifo
cparata	2:a94816b14e3d	2725	* @brief This section group all the functions concerning the fifo usage
cparata	0:dff8803aace7	2726	* @{
cparata	2:a94816b14e3d	2727	*
cparata	0:dff8803aace7	2728	*/
cparata	0:dff8803aace7	2729
cparata	0:dff8803aace7	2730	/**
cparata	2:a94816b14e3d	2731	* @brief FIFO watermark level selection.[set]
cparata	0:dff8803aace7	2732	*
cparata	2:a94816b14e3d	2733	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2734	* @param val change the values of fth in reg FIFO_CTRL
cparata	2:a94816b14e3d	2735	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2736	*
cparata	0:dff8803aace7	2737	*/
cparata	0:dff8803aace7	2738	int32_t lis2dw12_fifo_watermark_set(lis2dw12_ctx_t *ctx, uint8_t val)
cparata	0:dff8803aace7	2739	{
cparata	4:94c5d5546161	2740	lis2dw12_fifo_ctrl_t reg;
cparata	4:94c5d5546161	2741	int32_t ret;
cparata	0:dff8803aace7	2742
cparata	4:94c5d5546161	2743	ret = lis2dw12_read_reg(ctx, LIS2DW12_FIFO_CTRL, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2744	if (ret == 0) {
cparata	4:94c5d5546161	2745	reg.fth = val;
cparata	4:94c5d5546161	2746	ret = lis2dw12_write_reg(ctx, LIS2DW12_FIFO_CTRL, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2747	}
cparata	0:dff8803aace7	2748
cparata	4:94c5d5546161	2749	return ret;
cparata	0:dff8803aace7	2750	}
cparata	0:dff8803aace7	2751
cparata	0:dff8803aace7	2752	/**
cparata	4:94c5d5546161	2753	* @brief FIFO watermark level selection.[get]
cparata	0:dff8803aace7	2754	*
cparata	2:a94816b14e3d	2755	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2756	* @param val change the values of fth in reg FIFO_CTRL
cparata	2:a94816b14e3d	2757	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2758	*
cparata	0:dff8803aace7	2759	*/
cparata	0:dff8803aace7	2760	int32_t lis2dw12_fifo_watermark_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2761	{
cparata	4:94c5d5546161	2762	lis2dw12_fifo_ctrl_t reg;
cparata	4:94c5d5546161	2763	int32_t ret;
cparata	0:dff8803aace7	2764
cparata	4:94c5d5546161	2765	ret = lis2dw12_read_reg(ctx, LIS2DW12_FIFO_CTRL, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2766	*val = reg.fth;
cparata	0:dff8803aace7	2767
cparata	4:94c5d5546161	2768	return ret;
cparata	0:dff8803aace7	2769	}
cparata	0:dff8803aace7	2770
cparata	0:dff8803aace7	2771	/**
cparata	2:a94816b14e3d	2772	* @brief FIFO mode selection.[set]
cparata	0:dff8803aace7	2773	*
cparata	2:a94816b14e3d	2774	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2775	* @param val change the values of fmode in reg FIFO_CTRL
cparata	2:a94816b14e3d	2776	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2777	*
cparata	0:dff8803aace7	2778	*/
cparata	0:dff8803aace7	2779	int32_t lis2dw12_fifo_mode_set(lis2dw12_ctx_t *ctx, lis2dw12_fmode_t val)
cparata	0:dff8803aace7	2780	{
cparata	4:94c5d5546161	2781	lis2dw12_fifo_ctrl_t reg;
cparata	4:94c5d5546161	2782	int32_t ret;
cparata	0:dff8803aace7	2783
cparata	4:94c5d5546161	2784	ret = lis2dw12_read_reg(ctx, LIS2DW12_FIFO_CTRL, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2785	if (ret == 0) {
cparata	4:94c5d5546161	2786	reg.fmode = (uint8_t) val;
cparata	4:94c5d5546161	2787	ret = lis2dw12_write_reg(ctx, LIS2DW12_FIFO_CTRL, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2788	}
cparata	4:94c5d5546161	2789	return ret;
cparata	0:dff8803aace7	2790	}
cparata	0:dff8803aace7	2791
cparata	0:dff8803aace7	2792	/**
cparata	2:a94816b14e3d	2793	* @brief FIFO mode selection.[get]
cparata	0:dff8803aace7	2794	*
cparata	2:a94816b14e3d	2795	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2796	* @param val Get the values of fmode in reg FIFO_CTRL
cparata	2:a94816b14e3d	2797	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2798	*
cparata	0:dff8803aace7	2799	*/
cparata	0:dff8803aace7	2800	int32_t lis2dw12_fifo_mode_get(lis2dw12_ctx_t ctx, lis2dw12_fmode_t val)
cparata	0:dff8803aace7	2801	{
cparata	4:94c5d5546161	2802	lis2dw12_fifo_ctrl_t reg;
cparata	4:94c5d5546161	2803	int32_t ret;
cparata	2:a94816b14e3d	2804
cparata	4:94c5d5546161	2805	ret = lis2dw12_read_reg(ctx, LIS2DW12_FIFO_CTRL, (uint8_t *) &reg, 1);
cparata	0:dff8803aace7	2806
cparata	4:94c5d5546161	2807	switch (reg.fmode) {
cparata	4:94c5d5546161	2808	case LIS2DW12_BYPASS_MODE:
cparata	4:94c5d5546161	2809	*val = LIS2DW12_BYPASS_MODE;
cparata	4:94c5d5546161	2810	break;
cparata	4:94c5d5546161	2811	case LIS2DW12_FIFO_MODE:
cparata	4:94c5d5546161	2812	*val = LIS2DW12_FIFO_MODE;
cparata	4:94c5d5546161	2813	break;
cparata	4:94c5d5546161	2814	case LIS2DW12_STREAM_TO_FIFO_MODE:
cparata	4:94c5d5546161	2815	*val = LIS2DW12_STREAM_TO_FIFO_MODE;
cparata	4:94c5d5546161	2816	break;
cparata	4:94c5d5546161	2817	case LIS2DW12_BYPASS_TO_STREAM_MODE:
cparata	4:94c5d5546161	2818	*val = LIS2DW12_BYPASS_TO_STREAM_MODE;
cparata	4:94c5d5546161	2819	break;
cparata	4:94c5d5546161	2820	case LIS2DW12_STREAM_MODE:
cparata	4:94c5d5546161	2821	*val = LIS2DW12_STREAM_MODE;
cparata	4:94c5d5546161	2822	break;
cparata	4:94c5d5546161	2823	default:
cparata	4:94c5d5546161	2824	*val = LIS2DW12_BYPASS_MODE;
cparata	4:94c5d5546161	2825	break;
cparata	4:94c5d5546161	2826	}
cparata	4:94c5d5546161	2827	return ret;
cparata	0:dff8803aace7	2828	}
cparata	0:dff8803aace7	2829
cparata	0:dff8803aace7	2830	/**
cparata	2:a94816b14e3d	2831	* @brief Number of unread samples stored in FIFO.[get]
cparata	0:dff8803aace7	2832	*
cparata	2:a94816b14e3d	2833	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2834	* @param val change the values of diff in reg FIFO_SAMPLES
cparata	2:a94816b14e3d	2835	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2836	*
cparata	0:dff8803aace7	2837	*/
cparata	0:dff8803aace7	2838	int32_t lis2dw12_fifo_data_level_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2839	{
cparata	4:94c5d5546161	2840	lis2dw12_fifo_samples_t reg;
cparata	4:94c5d5546161	2841	int32_t ret;
cparata	0:dff8803aace7	2842
cparata	4:94c5d5546161	2843	ret = lis2dw12_read_reg(ctx, LIS2DW12_FIFO_SAMPLES, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2844	*val = reg.diff;
cparata	0:dff8803aace7	2845
cparata	4:94c5d5546161	2846	return ret;
cparata	0:dff8803aace7	2847	}
cparata	0:dff8803aace7	2848	/**
cparata	2:a94816b14e3d	2849	* @brief FIFO overrun status.[get]
cparata	0:dff8803aace7	2850	*
cparata	2:a94816b14e3d	2851	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2852	* @param val change the values of fifo_ovr in reg FIFO_SAMPLES
cparata	2:a94816b14e3d	2853	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2854	*
cparata	0:dff8803aace7	2855	*/
cparata	0:dff8803aace7	2856	int32_t lis2dw12_fifo_ovr_flag_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2857	{
cparata	4:94c5d5546161	2858	lis2dw12_fifo_samples_t reg;
cparata	4:94c5d5546161	2859	int32_t ret;
cparata	0:dff8803aace7	2860
cparata	4:94c5d5546161	2861	ret = lis2dw12_read_reg(ctx, LIS2DW12_FIFO_SAMPLES, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2862	*val = reg.fifo_ovr;
cparata	0:dff8803aace7	2863
cparata	4:94c5d5546161	2864	return ret;
cparata	0:dff8803aace7	2865	}
cparata	0:dff8803aace7	2866	/**
cparata	2:a94816b14e3d	2867	* @brief FIFO threshold status flag.[get]
cparata	0:dff8803aace7	2868	*
cparata	2:a94816b14e3d	2869	* @param ctx read / write interface definitions
cparata	2:a94816b14e3d	2870	* @param val change the values of fifo_fth in reg FIFO_SAMPLES
cparata	2:a94816b14e3d	2871	* @retval interface status (MANDATORY: return 0 -> no Error)
cparata	0:dff8803aace7	2872	*
cparata	0:dff8803aace7	2873	*/
cparata	0:dff8803aace7	2874	int32_t lis2dw12_fifo_wtm_flag_get(lis2dw12_ctx_t ctx, uint8_t val)
cparata	0:dff8803aace7	2875	{
cparata	4:94c5d5546161	2876	lis2dw12_fifo_samples_t reg;
cparata	4:94c5d5546161	2877	int32_t ret;
cparata	0:dff8803aace7	2878
cparata	4:94c5d5546161	2879	ret = lis2dw12_read_reg(ctx, LIS2DW12_FIFO_SAMPLES, (uint8_t *) &reg, 1);
cparata	4:94c5d5546161	2880	*val = reg.fifo_fth;
cparata	0:dff8803aace7	2881
cparata	4:94c5d5546161	2882	return ret;
cparata	0:dff8803aace7	2883	}
cparata	0:dff8803aace7	2884	/**
cparata	0:dff8803aace7	2885	* @}
cparata	4:94c5d5546161	2886	*
cparata	0:dff8803aace7	2887	*/
cparata	0:dff8803aace7	2888
cparata	0:dff8803aace7	2889	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	17 Sep 2019
Imports:	6
Forks:	0
Commits:	6
Dependents:	1
Dependencies:	2
Followers:	35

lis2dw12_reg.c@4:94c5d5546161, 2019-07-24 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning