KenYEAH! 2k15
Working weather station
Dependencies: DHT MS5637 NRF2401P mbed
Revision 0:47c7fddba92c, committed 2015-06-12
- Comitter:
- ree5yd
- Date:
- Fri Jun 12 14:18:48 2015 +0000
- Commit message:
- Working weather station!
Changed in this revision
diff -r 000000000000 -r 47c7fddba92c DHT.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DHT.lib Fri Jun 12 14:18:48 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Wimpie/code/DHT/#9b5b3200688f
diff -r 000000000000 -r 47c7fddba92c MS5637.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MS5637.lib Fri Jun 12 14:18:48 2015 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/cstevens/code/MS5637/#3a9d37268ccd
diff -r 000000000000 -r 47c7fddba92c NRF2401P.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/NRF2401P.lib Fri Jun 12 14:18:48 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/epgmdm/code/NRF2401P/#7e253c677a1f
diff -r 000000000000 -r 47c7fddba92c main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Fri Jun 12 14:18:48 2015 +0000
@@ -0,0 +1,141 @@
+ #include "mbed.h"
+ #include "ms5637.h"
+ #include "DHT.h"
+ #include "NRF2401P.h"
+#include "nRF24l01.h"
+
+ms5637 ms(PTC9,PTC8); // i2c pins used
+Serial pc(USBTX, USBRX); // local terminal interface
+AnalogIn ldr(PTB3);
+DHT sensor(PTE5,SEN11301P);
+Serial myarduino(PTE0, PTE1);
+
+ int main (void) {
+ //pc.baud(921600); // set up USB serial speed
+
+ // set up the ms5637
+ pc.printf("\n\nInitializing the MS5637..\n");
+ ms.cmd_reset();
+ pc.printf("Ready\n");
+
+ float Vo;
+// float R = 10000; // 10k
+// float Vin = 3.3; // input from 3V3
+
+ int err;
+ printf("\r\n Test program");
+ printf("\r\n******************\r\n");
+
+//NRF
+ long long addr1=0xAB01CD; // setup address - any 5 byte number - same as RX
+ int channel =0x10; // [0-126] setup channel, must be same as RX
+ bool txOK;
+ char msg[32];
+ char ackData[32];
+ char len;
+
+ // Setup
+ NRF2401P nrf1(PTD2,PTD3, PTD1,PTD5, PTD0); //mosi, miso, sclk, csn, ce)
+ nrf1.quickTxSetup(channel, addr1); // sets nrf24l01+ as transmitter
+ printf("set up complete \n\r");
+//
+
+ //initialise data to be sent
+ char bufferL[50];
+ char bufferT[50];
+ char bufferP[50];
+ char bufferH[50];
+
+ int nL;
+ int nT;
+ int nP;
+ int nH;
+
+ myarduino.baud(9600);
+
+ wait(1); // wait 1 second for device stable status
+
+ while(1) {
+ // Humidity and temperature DHT11 sensor
+ err = sensor.readData();
+ if (err == 0) {
+ printf("\n\r\n\rHumidity is %4.2f \r\n",sensor.ReadHumidity());
+ printf("Temperature is %4.2f C \r\n",sensor.ReadTemperature(CELCIUS));
+ } else {
+ while ( err != 0 ) {
+ err = sensor.readData();
+ }
+ printf("\n\r\n\rHumidity is %4.2f \r\n",sensor.ReadHumidity());
+ printf("Temperature is %4.2f C \r\n",sensor.ReadTemperature(CELCIUS));
+ }
+
+ // Temperature and pressure sensor ms
+ double Temp2 = ms.calcTemp(); //calculate press and temp, then returns current temperature in degC
+ double Press = ms.calcPressure(); //calculate press and temp, then returns current pressure in mb
+ double GetPress = ms.getPressure(); //returns current pressure in mb. Does no calculations. Ususally done after calcTemp()
+
+ pc.printf("Temp: %.2f degC\n\r", Temp2);
+ pc.printf("Barometer: %.1f mB %.3f in/Hg\n\r", Press, Press * 0.0295301);
+
+ // Light Sensor LDR
+ Vo = ldr.read();
+// float Rt = (Vo*R)/(Vin - Vo);
+// float FTC = (powf(10,5.57644))*(powf(Rt,-1.211743));
+// float Lux = FTC*10.76;
+// FAULTY:float pd = (-3.4099 *10000000)*(Vo)*Vo + (3.1612e5)*(Vo) - 266.5672;
+ float pd = 1.7833/Vo;
+ printf("Sensor reading (Vo): %f V\r\n", Vo);
+ printf("Sensor reading (power density): %f W/m^2\r\n\r\n", pd);
+
+// printf("FTC: %f\r\n",FTC);
+// printf("Lux: %f\r\n\r\n",Lux);
+
+ wait(2);
+
+
+//Light
+ sprintf(msg, "l%0.3fL\n\r",pd);
+ txOK= nrf1.transmitData(msg,strlen(msg));
+ printf("L sent \n\r");
+
+ // read ack data if available
+ if (nrf1.isAckData()) {
+ len= nrf1.getRxData(ackData); // len is number of bytes in ackData
+ ackData[len]=0;
+ printf("%s\n\r\n\r",ackData);
+ }
+//Temperature
+ sprintf(msg, "t%0.3fT\n\r",Temp2);
+ txOK= nrf1.transmitData(msg,strlen(msg));
+ printf("T sent \n\r");
+
+ // read ack data if available
+ if (nrf1.isAckData()) {
+ len= nrf1.getRxData(ackData); // len is number of bytes in ackData
+ ackData[len]=0;
+ printf("%s\n\r\n\r",ackData);
+ }
+//Pressure
+ sprintf(msg, "p%0.3fP\n\r",Press);
+ txOK= nrf1.transmitData(msg,strlen(msg));
+ printf("P sent \n\r");
+
+ // read ack data if available
+ if (nrf1.isAckData()) {
+ len= nrf1.getRxData(ackData); // len is number of bytes in ackData
+ ackData[len]=0;
+ printf("%s\n\r\n\r",ackData);
+ }
+//Humidity
+ sprintf(msg, "h%0.3fH\n\r",sensor.ReadHumidity());
+ txOK= nrf1.transmitData(msg,strlen(msg));
+ printf("H sent \n\r\n\r");
+
+ // read ack data if available
+ if (nrf1.isAckData()) {
+ len= nrf1.getRxData(ackData); // len is number of bytes in ackData
+ ackData[len]=0;
+ printf("%s\n\r\n\r",ackData);
+ }
+ }
+ }
diff -r 000000000000 -r 47c7fddba92c mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Fri Jun 12 14:18:48 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/cbbeb26dbd92 \ No newline at end of file