Diff: bq769x0.h

Revision:

0:d92f936cf10d

diff -r 000000000000 -r d92f936cf10d bq769x0.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/bq769x0.h	Sat Jul 31 09:12:21 2021 +0000
@@ -0,0 +1,202 @@
+/* Battery management system based on bq769x0 for ARM mbed
+ * Copyright (c) 2015-2018 Martin Jäger (www.libre.solar)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef BQ769X0_H
+#define BQ769X0_H
+
+#include "mbed.h"
+
+#define MAX_NUMBER_OF_CELLS 15
+#define MAX_NUMBER_OF_THERMISTORS 3
+#define NUM_OCV_POINTS 21
+
+// IC type/size
+#define bq76920 1
+#define bq76930 2
+#define bq76940 3
+
+// output information to serial console for debugging
+#define BQ769X0_DEBUG 1
+
+class bq769x0 {
+
+public:
+    //bms1_output(PinName bms1_on)
+    // initialization, status update and shutdown
+    bq769x0(I2C& bqI2C, PinName alertPin, int bqType = bq76940, int bqI2CAddress = 0x18, bool crc = false);
+    //bq769x0(I2C& bqI2C, PinName alertPin, int bqType = bq76930, int bqI2CAddress = 0x08, bool crc = true);
+    //void init(); // kikkawa added
+    void init1(); // kikkawa added
+    void init2(); // kikkawa added
+
+    int checkStatus();  // returns 0 if everything is OK
+    
+    void update(void);
+    void update1(void); // added
+    void update2(void); // added
+
+    void boot(PinName bootPin);
+    void shutdown(void);
+
+    // charging control
+    bool enableCharging(void);
+    void disableCharging(void);
+    bool enableDischarging(void);
+    void disableDischarging(void);
+
+    // hardware settings
+    void setShuntResistorValue(float res_mOhm);
+    void setThermistorBetaValue(int beta_K);
+
+    void resetSOC(int percent = -1);    // 0-100 %, -1 for automatic reset based on OCV
+    void setBatteryCapacity(long capacity_mAh);
+    void setOCV(int voltageVsSOC[NUM_OCV_POINTS]);
+
+    int getNumberOfCells(void);
+    int getNumberOfConnectedCells(void);
+
+    // limit settings (for battery protection)
+    void setTemperatureLimits(int minDischarge_degC, int maxDischarge_degC, int minCharge_degC, int maxCharge_degC, int hysteresis_degC = 2);    // °C
+    long setShortCircuitProtection(long current_mA, int delay_us = 70);
+    long setOvercurrentChargeProtection(long current_mA, int delay_ms = 8);
+    long setOvercurrentDischargeProtection(long current_mA, int delay_ms = 8);
+    int setCellUndervoltageProtection(int voltage_mV, int delay_s = 1);
+    int setCellOvervoltageProtection(int voltage_mV, int delay_s = 1);
+
+    // balancing settings
+    void setBalancingThresholds(int idleTime_min = 30, int absVoltage_mV = 3400, int voltageDifference_mV = 20);
+    void setIdleCurrentThreshold(int current_mA);
+
+    // automatic balancing when battery is within balancing thresholds
+    void enableAutoBalancing(void);
+    void disableAutoBalancing(void);
+
+    // battery status
+    int  getBatteryCurrent(void);
+    int  getBatteryVoltage(void);
+    int  getCellVoltage(int idCell);    // from 1 to 15
+    
+    int  getCellVoltage1(int idCell);    // from 1 to 15
+    int  getCellVoltage2(int idCell);    // from 1 to 15
+
+    int  getMinCellVoltage(void);
+    int  getMaxCellVoltage(void);
+    int  getAvgCellVoltage(void);
+    float getTemperatureDegC(int channel = 1);
+    float getTemperatureDegF(int channel = 1);
+    float getSOC(void);
+    int getBalancingStatus(void);
+
+    // interrupt handling (not to be called manually!)
+    void setAlertInterruptFlag(void);
+    
+    //public kara idou
+
+    #if BQ769X0_DEBUG
+    void printRegisters(void);
+    #endif
+
+private:
+    //DigitalOut _bms1_on;
+
+    // Variables
+
+    I2C& _i2c;
+    Timer _timer;
+    InterruptIn _alertInterrupt;
+
+    int I2CAddress;
+    int type;
+    bool crcEnabled;
+
+    float shuntResistorValue_mOhm;
+    int thermistorBetaValue;  // typical value for Semitec 103AT-5 thermistor: 3435
+    int *OCV;  // Open Circuit Voltage of cell for SOC 100%, 95%, ..., 5%, 0%
+
+    // indicates if a new current reading or an error is available from BMS IC
+    bool alertInterruptFlag;
+
+    int numberOfCells;                      // number of cells allowed by IC
+    int connectedCells;                     // actual number of cells connected
+    int cellVoltages[MAX_NUMBER_OF_CELLS];          // mV
+    int idCellMaxVoltage;
+    int idCellMinVoltage;
+    long batVoltage;                                // mV
+    long batCurrent;                                // mA
+    int temperatures[MAX_NUMBER_OF_THERMISTORS];    // °C/10
+
+    long nominalCapacity;    // mAs, nominal capacity of battery pack, max. 1193 Ah possible
+    long coulombCounter;     // mAs (= milli Coulombs) for current integration
+
+    // Current limits (mA)
+    long maxChargeCurrent;
+    long maxDischargeCurrent;
+    int idleCurrentThreshold; // mA
+
+    // Temperature limits (°C/10)
+    int minCellTempCharge;
+    int minCellTempDischarge;
+    int maxCellTempCharge;
+    int maxCellTempDischarge;
+    int cellTempHysteresis;
+
+    // Cell voltage limits (mV)
+    int maxCellVoltage;
+    int minCellVoltage;
+    int balancingMinCellVoltage_mV;
+    int balancingMaxVoltageDifference_mV;
+
+    int adcGain;    // uV/LSB
+    int adcOffset;  // mV
+    int adcGain1;    // uV/LSB      // added
+    int adcOffset1;  // mV          // added
+    int adcGain2;    // uV/LSB      // added
+    int adcOffset2;  // mV          // added
+
+    int errorStatus;
+    bool autoBalancingEnabled;
+    unsigned int balancingStatus;     // holds on/off status of balancing switches
+    int balancingMinIdleTime_s;
+    unsigned long idleTimestamp;
+
+    unsigned int secSinceErrorCounter;
+    unsigned long interruptTimestamp;
+
+    bool cellTempChargeErrorFlag;
+    bool cellTempDischargeErrorFlag;
+
+    // Methods
+
+    bool determineAddressAndCrc(void);
+
+    void  updateVoltages(void);
+    void  updateVoltages1(void);    // added
+    void  updateVoltages2(void);    // added
+    
+    void  updateCurrent(void);
+    void  updateTemperatures(void);
+
+    void updateBalancingSwitches(void);
+
+    void checkCellTemp(void);
+
+    int  readRegister(int address);
+    void writeRegister(int address, int data);
+    
+};
+
+#endif // BQ769X0_H
+