MIP8 Frame buffer sample. Color display
Fork of MIP8f_FRDM_sample by
Introduction
This Wiki page describes how to use the sample code to evaluate JDI_MIP. For JDI_MIP, please refer to the following Wiki page
https://os.mbed.com/teams/JapanDisplayInc/wiki/MIP-Reflective-type-Color-Display
https://os.mbed.com/teams/JapanDisplayInc/wiki/SPI_MIP8
Constitution
- FRDM-K64F(NXP)
- JDI_MIP Panel
- JDI_MIP Interface board.
Usage
1. Get MIP-panel, and JDI_MIP Interface Board, FRDM-K64F(NXP).
2. Import into compiler & Compile Program.
/media/uploads/JDI_Mbed_Team/anordertodownloadthesamplecodecompilerunonthetargetboard_u3lVTcw.pdf
3. Copy Setting File and Image to micro SD-CARD.
a) Download the following file corresponding to the target panel, and rename file identifier (.bin -> .zip), and unzip the file on micro SD Card's root directory.
- LPM013M126x (176x176) :/media/uploads/JDI_Mbed_Team/sdcard_176x176.bin
- LPM027M128x (400x240) :/media/uploads/JDI_Mbed_Team/sdcard_400x240.bin
- LPM044M141x (640x480) & TX11D200 : /media/uploads/JDI_Mbed_Team/sdcard_640x480.bin
ex.) in case of LPM044M141x (640x480) :
b) Insert micro SD-CARD to FRDM-K64F.
4. Upload binary file to FRDM-K64F.and push Reset Button.
Interface board
- Get from Switch Science
- Schematic/Parts list
- Gerber data(rename bin->zup, and unzip)
/media/uploads/STakayama/jdi_mip8_lcd_last.pdf
/media/uploads/STakayama/jdi-mip-pcb_partslist.pdf
/media/uploads/STakayama/jdi_mip8_lcd_last.bin
- Rename .bin to .zip,and unzip -> gerber data files.
FRDM Pin(Port) assign
Program Overview
Sample Code (.bin)
/media/uploads/JDI_Mbed_Team/mip8f_frdm_sample.k64f.bin
- MIP8f_FRDM_sample demo
Special Thanks
- ARM mbed team
- NXP for FRDM-K64F
- Switch Science for Interface Board
- Adafruit Industries for Adafruit_LEDBackpack.
- Neil Thiessen for SDFileSystem.
- MikroElektronika for GLCD Font
- Many developers
StateSw/StateSW.h
- Committer:
- JDI_Mbed_Team
- Date:
- 2018-10-22
- Revision:
- 4:55477a21ace1
- Parent:
- 0:33fe30a2b785
File content as of revision 4:55477a21ace1:
/* mbed StateSW Library without using PWM pins */ #include "mbed.h" class StateSW { public: StateSW (PinName SWPin); void Enable(int StateNum, int NoiseCancel, int OpenTime); int State(void); bool IfAtTime(void); void IfCntState(bool IfCntState); void IfCntClose(bool IfCntClose); void IfCntOpen(bool IfCntOpen); // void Reset(void); // bool IfOnetime(void); protected: int _STATENUM; int _REPEAT; int _OPNCNT; int _State; void _fall(void); void _rise(void); void _SeekPress(void); DigitalIn _SW; bool _preSW; int _PressCount; int _IfCntOpen; int _IfCntClose; bool _IfCntState; bool _IfAtTime; Timer _Timer_SW; Ticker _StateCounter; };