whatever

Dependencies:   C027 C027_Support M2XStreamClient PowerControl jsonlite mbed-rtos mbed

Fork of PONY_Ph0-uAXIS by Sean McBeath

Revision:
31:f94b8f987b62
Parent:
30:f9bb5aba1155
Child:
32:4b94cb22d338
--- a/main.cpp	Thu Nov 19 19:14:39 2015 +0000
+++ b/main.cpp	Sat Nov 21 01:27:50 2015 +0000
@@ -1,47 +1,146 @@
 #include "mbed.h"
 
+#include <string.h>
+
+// ublox C027 support libraries
+#include "GPS.h"    // GPS support
+#include "MDM.h"    // Modem support
+
+// AT&T Support
+
 //------------------------------------------------------------------------------------
-/* This example was tested on C027-U20 and C027-G35 with the on board modem. 
-   
-   Additionally it was tested with a shield where the SARA-G350/U260/U270 RX/TX/PWRON 
-   is connected to D0/D1/D4 and the GPS SCL/SDA is connected D15/D15. In this 
-   configuration the following platforms were tested (it is likely that others 
-   will work as well)
-   - U-BLOX:    C027-G35, C027-U20, C027-C20 (for shield set define C027_FORCE_SHIELD)
-   - NXP:       LPC1549v2, LPC4088qsb
-   - Freescale: FRDM-KL05Z, FRDM-KL25Z, FRDM-KL46Z, FRDM-K64F
-   - STM:       NUCLEO-F401RE, NUCLEO-F030R8
-                mount resistors SB13/14 1k, SB62/63 0R
-*/
-#include "GPS.h"
-#include "MDM.h"
-//------------------------------------------------------------------------------------
-// You need to configure these cellular modem / SIM parameters.
-// These parameters are ignored for LISA-C200 variants and can be left NULL.
-//------------------------------------------------------------------------------------
-//! Set your secret SIM pin here (e.g. "1234"). Check your SIM manual.
-#define SIMPIN      "1111"
-/*! The APN of your network operator SIM, sometimes it is "internet" check your 
-    contract with the network operator. You can also try to look-up your settings in 
-    google: https://www.google.de/search?q=APN+list */
-#define APN         "m2m.com.attz"
-//! Set the user name for your APN, or NULL if not needed
-#define USERNAME    NULL
-//! Set the password for your APN, or NULL if not needed
-#define PASSWORD    NULL 
+// Cellular modem/SIM parameters
+#define SIMPIN      "1111"          //!SIMPIN is 1111 by default for AT&T SIMs.
+#define APN         "m2m.com.attz"  // Defined AT&T M2M APN
+#define USERNAME    NULL            //! Set the user name for your APN, or NULL if not needed (which, apparently, it isn't)
+#define PASSWORD    NULL            //! Set the password for your APN, or NULL if not needed (which, apparently, it isn't)
 //------------------------------------------------------------------------------------
 
 // Set pinout for LED
 DigitalOut myled(LED); 
 
 int main(void) {
-    printf("\n\n----------\nI'm alive!\n");
+    printf("\n\n\r----------\r\nI'm alive!\r\n");
     
-    while(1) {
-        myled = !myled;
+    // Loading wait
+    for(int i = 0; i < 10; i++) {
+        myled = !myled;;
         wait(0.2);
     }
     
+    int ret;                // Integer returns
+    
+    // Not 100% sure where this LARGE_DATA flag is being set, but I think we might be using it... (SGM)
+    #ifdef LARGE_DATA
+    char buf[2048] = "";
+    #else
+        char buf[512] = "";
+    #endif
+    
+    if(sizeof(buf) > 600)
+        printf("(Using LARGE_DATA)\r\n");    
+    else
+        printf("(Not using large data)\r\n");
+    
+    
+    printf("\r\nBegin test loop\r\n");
+    
+    GPSI2C gps;     // Initialize GPS object
+    
+    printf("GPS initialized...\r\n");
+    
+    
+    
+    
+    
+    while( (ret = gps.getMessage(buf, sizeof(buf))) < 1 ) {
+        if (ret<0)
+            printf("WAIT received from GPS\r\n");
+        if (ret==0)
+            printf("NOT FOUND received from GPS\r\n");
+        myled = !myled;
+        wait(1.0);
+    }
+    
+    float locationLoopWait = 1.0;
+    int locationLoopIter = 0;
+    // Get a good GPS message
+    
+    int len = LENGTH(ret);
+    
+    while(true) {
+        locationLoopIter++;
+        
+        ret = gps.getMessage(buf, sizeof(buf));
+        
+        // Test for location data in this priority: GLL, RMC, GGA
+        
+        if ( strstr(buf, "GLL") ) {
+            char ch = '-';
+            // FIX: The getNmeaItem isn't working to capture the check character in a valid GLL code, which is unusual; the workaround seems to be that invalid GLL values DOES find a "V"
+            if(!gps.getNmeaItem(6,buf,len,ch)) {
+                printf("\n\n\rHave GLL location data after %i seconds and %i requests:\r\n", ( (int) locationLoopWait * locationLoopIter), locationLoopIter );
+                printf(buf);
+                break;
+            }
+            else {
+                printf("Received invalid GLL data\r\n");
+                printf(buf);   
+                
+            }
+                
+        }
+        else if ( strstr(buf, "RMC") ) {
+            printf("RMC loc...");
+            //printf(buf); printf("\r\n\n");
+            
+        }
+        else if ( strstr(buf, "GGA") ) {
+            printf("GGA loc...");
+            //printf(buf); printf("\r\n\n");
+        }
+        else {
+            printf("\n\rNo location data this message\r\n");
+        }
+        
+        wait(locationLoopWait);
+    }// LOOP THAT MOFO
+    
+    
+    // Begin parsing our GPS value
+    
+    double la = 0, lo = 0; // Declare latitude and longitude variables
+    
+    gps.getNmeaAngle(1,buf,len,la);
+    gps.getNmeaAngle(3,buf,len,lo);
+    
+    printf("\r\n\nLatitude: %G\r\nLongitude: %G\r\n", la, lo);
+    
+    
+    
+    
+    
+    
+    
+    /*
+    
+
+    if ((PROTOCOL(ret) == GPSParser::NMEA) && (len > 6)) {      // Check if we're getting an NMEA protocol response
+        
+        printf("Indeed, an NMEA protocol response!\r\n");
+        
+        // Check the talker
+        if( (buf[0] == '$') || (buf[1] == 'G' ) ) {
+            char talkerID[30] = "";
+            sprintf(talkerID, "We've got a valid talker=%c%c\r\n", buf[0], buf[1]);
+            printf(talkerID);    
+        }
+    }
+       */   
+    
+    
+    
+    
 }
 
 
@@ -54,241 +153,3 @@
 
 
 
-
-
-
-
-
-
-
-
-
-/*
-
-int main(void)
-{
-    int ret;
-#ifdef LARGE_DATA
-    char buf[2048] = "";
-#else
-    char buf[512] = "";
-#endif
-
-    // Create the GPS object
-#if 1   // use GPSI2C class
-    GPSI2C gps;
-#else   // or GPSSerial class 
-    GPSSerial gps; 
-#endif
-    // Create the modem object
-    MDMSerial mdm;
-    //mdm.setDebug(4); // enable this for debugging issues 
-    // initialize the modem 
-    MDMParser::DevStatus devStatus = {};
-    MDMParser::NetStatus netStatus = {};
-    bool mdmOk = mdm.init(SIMPIN, &devStatus);
-    mdm.dumpDevStatus(&devStatus);
-    if (mdmOk) {
-#if 0
-        // file system API
-        const char* filename = "File";
-        char buf[] = "Hello World";
-        printf("writeFile \"%s\"\r\n", buf);
-        if (mdm.writeFile(filename, buf, sizeof(buf)))
-        {
-            memset(buf, 0, sizeof(buf));
-            int len = mdm.readFile(filename, buf, sizeof(buf));
-            if (len >= 0) 
-                printf("readFile %d \"%.*s\"\r\n", len, len, buf);
-            mdm.delFile(filename);
-        }
-#endif
-
-        // wait until we are connected
-        mdmOk = mdm.registerNet(&netStatus);
-        mdm.dumpNetStatus(&netStatus);
-    }
-    if (mdmOk)
-    {
-        // http://www.geckobeach.com/cellular/secrets/gsmcodes.php
-        // http://de.wikipedia.org/wiki/USSD-Codes
-        const char* ussd = "*130#"; // You may get answer "UNKNOWN APPLICATION"
-        printf("Ussd Send Command %s\r\n", ussd);
-        ret = mdm.ussdCommand(ussd, buf);
-        if (ret > 0) 
-            printf("Ussd Got Answer: \"%*s\"\r\n", ret, buf);
-
-        // join the internet connection 
-        MDMParser::IP ip = mdm.join(APN,USERNAME,PASSWORD);
-        if (ip != NOIP)
-        {
-            mdm.dumpIp(ip);
-            printf("Make a Http Post Request\r\n");
-            int socket = mdm.socketSocket(MDMParser::IPPROTO_TCP);
-            if (socket >= 0)
-            {
-                mdm.socketSetBlocking(socket, 10000);
-                if (mdm.socketConnect(socket, "mbed.org", 80))
-                {
-                    const char http[] = "GET /media/uploads/mbed_official/hello.txt HTTP/1.0\r\n\r\n";
-                    mdm.socketSend(socket, http, sizeof(http)-1);
-                
-                    ret = mdm.socketRecv(socket, buf, sizeof(buf)-1);
-                    if (ret > 0)
-                        printf("Socket Recv \"%*s\"\r\n", ret, buf);
-                    mdm.socketClose(socket);
-                }
-                mdm.socketFree(socket);
-            }
-            
-            int port = 7;
-            const char* host = "echo.u-blox.com";
-            MDMParser::IP ip = mdm.gethostbyname(host);
-            char data[] = "\r\nxxx Socket Hello World\r\n"
-#ifdef LARGE_DATA
-                        "00  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "01  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "02  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "03  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "04  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        
-                        "05  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "06  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "07  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "08  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "09  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-            
-                        "10  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "11  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "12  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "13  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "14  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        
-                        "15  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "16  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "17  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "18  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-                        "19  0123456789 0123456789 0123456789 0123456789 0123456789 \r\n"
-#endif            
-                        "End\r\n";
-                
-            printf("Testing TCP sockets with ECHO server\r\n");
-            socket = mdm.socketSocket(MDMParser::IPPROTO_TCP);
-            if (socket >= 0)
-            {
-                mdm.socketSetBlocking(socket, 10000);
-                if (mdm.socketConnect(socket, host, port)) {
-                    memcpy(data, "\r\nTCP", 5); 
-                    ret = mdm.socketSend(socket, data, sizeof(data)-1);
-                    if (ret == sizeof(data)-1) {
-                        printf("Socket Send %d \"%s\"\r\n", ret, data);
-                    }
-                    ret = mdm.socketRecv(socket, buf, sizeof(buf)-1);
-                    if (ret >= 0) {
-                        printf("Socket Recv %d \"%.*s\"\r\n", ret, ret, buf);
-                    }
-                    mdm.socketClose(socket);
-                }
-                mdm.socketFree(socket);
-            }
-
-            printf("Testing UDP sockets with ECHO server\r\n");
-            socket = mdm.socketSocket(MDMParser::IPPROTO_UDP, port);
-            if (socket >= 0)
-            {
-                mdm.socketSetBlocking(socket, 10000);
-                memcpy(data, "\r\nUDP", 5); 
-                ret = mdm.socketSendTo(socket, ip, port, data, sizeof(data)-1);
-                if (ret == sizeof(data)-1) {
-                    printf("Socket SendTo %s:%d " IPSTR " %d \"%s\"\r\n", host, port, IPNUM(ip), ret, data);
-                }
-                ret = mdm.socketRecvFrom(socket, &ip, &port, buf, sizeof(buf)-1);
-                if (ret >= 0) {
-                    printf("Socket RecvFrom " IPSTR ":%d %d \"%.*s\" \r\n", IPNUM(ip),port, ret, ret,buf);
-                }
-                mdm.socketFree(socket);
-            }
-            
-            // disconnect  
-            mdm.disconnect();
-        }
-    }
-    printf("SMS and GPS Loop\r\n");
-    char link[128] = "";
-    unsigned int i = 0xFFFFFFFF;
-    const int wait = 100;
-    bool abort = false;
-    //DigitalOut led(LED1);
-    while (!abort) {
-    //    led = !led;
-        while ((ret = gps.getMessage(buf, sizeof(buf))) > 0)
-        {
-            int len = LENGTH(ret);
-            //printf("NMEA: %.*s\r\n", len-2, msg); 
-            if ((PROTOCOL(ret) == GPSParser::NMEA) && (len > 6))
-            {
-                // talker is $GA=Galileo $GB=Beidou $GL=Glonass $GN=Combined $GP=GPS
-                if ((buf[0] == '$') || buf[1] == 'G') {
-                    #define _CHECK_TALKER(s) ((buf[3] == s[0]) && (buf[4] == s[1]) && (buf[5] == s[2]))
-                    if (_CHECK_TALKER("GLL")) {
-                        double la = 0, lo = 0;
-                        char ch;
-                        if (gps.getNmeaAngle(1,buf,len,la) && 
-                            gps.getNmeaAngle(3,buf,len,lo) && 
-                            gps.getNmeaItem(6,buf,len,ch) && ch == 'A')
-                        {
-                            printf("GPS Location: %.5f %.5f\r\n", la, lo); 
-                            sprintf(link, "I am here!\n"
-                                          "https://maps.google.com/?q=%.5f,%.5f", la, lo); 
-                        }
-                    } else if (_CHECK_TALKER("GGA") || _CHECK_TALKER("GNS") ) {
-                        double a = 0; 
-                        if (gps.getNmeaItem(9,buf,len,a)) // altitude msl [m]
-                            printf("GPS Altitude: %.1f\r\n", a); 
-                    } else if (_CHECK_TALKER("VTG")) {
-                        double s = 0; 
-                        if (gps.getNmeaItem(7,buf,len,s)) // speed [km/h]
-                            printf("GPS Speed: %.1f\r\n", s); 
-                    }
-                }
-            }
-        }
-        if (mdmOk && (i++ == 5000/wait)) {
-            i = 0;
-            // check the network status
-            if (mdm.checkNetStatus(&netStatus)) {
-                mdm.dumpNetStatus(&netStatus, fprintf, stdout);
-            }
-                
-            // checking unread sms
-            int ix[8];
-            int n = mdm.smsList("REC UNREAD", ix, 8);
-            if (8 < n) n = 8;
-            while (0 < n--)
-            {
-                char num[32];
-                printf("Unread SMS at index %d\r\n", ix[n]);
-                if (mdm.smsRead(ix[n], num, buf, sizeof(buf))) {
-                    printf("Got SMS from \"%s\" with text \"%s\"\r\n", num, buf);
-                    printf("Delete SMS at index %d\r\n", ix[n]);
-                    mdm.smsDelete(ix[n]);
-                    // provide a reply
-                    const char* reply = "Hello my friend";
-                    if (strstr(buf, "here are you"))    // Omits opening "W" or "w" for case insensitive search
-                        reply = *link ? link : "I don't know"; // reply wil location link
-                    else if (strstr(buf, "hutdown"))    // Omits opening "S" or "s" for case insensitive search
-                        abort = true, reply = "bye bye";
-                    printf("Send SMS reply \"%s\" to \"%s\"\r\n", reply, num);
-                    mdm.smsSend(num, reply);
-                }
-            }
-        }
-        wait_ms(wait);
-    }
-    gps.powerOff();
-    mdm.powerOff();
-    return 0;
-}
-
-
-*/
\ No newline at end of file