Gymtrack
SG RFID nRF51822 fork
Fork of
nRF51822
by 
Nordic Semiconductor
Diff: btle/custom/custom_helper.cpp
- Revision:
- 22:c6ee8136847e
- Parent:
- 21:84599842b5fb
- Child:
- 54:e2294c844c83
- Child:
- 56:a1071b629aa3
diff -r 84599842b5fb -r c6ee8136847e btle/custom/custom_helper.cpp
--- a/btle/custom/custom_helper.cpp Fri Jun 06 14:13:32 2014 +0100
+++ b/btle/custom/custom_helper.cpp Mon Jun 09 09:12:10 2014 +0100
@@ -1,247 +1,247 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
- #include "custom_helper.h"
-
-/*
- * The current version of the soft-device doesn't handle duplicate 128-bit UUIDs
- * very well. It is therefore necessary to filter away duplicates before
- * passing long UUIDs to sd_ble_uuid_vs_add(). The following types and data
- * structures involved in maintaining a local cache of 128-bit UUIDs.
- */
-typedef struct {
- LongUUID_t uuid;
- uint8_t type;
-} converted_uuid_table_entry_t;
-static const unsigned UUID_TABLE_MAX_ENTRIES = 8; /* This is the maximum number
- * of 128-bit UUIDs with distinct bases that
- * we expect to be in use; increase this
- * limit if needed. */
-static unsigned uuidTableEntries = 0; /* current usage of the table */
-converted_uuid_table_entry_t convertedUUIDTable[UUID_TABLE_MAX_ENTRIES];
-
-/**
- * lookup the cache of previously converted 128-bit UUIDs to find a type value.
- * @param uuid long UUID
- * @param recoveredType the type field of the 3-byte nRF's uuid.
- * @return true if a match is found.
- */
-static bool
-lookupConvertedUUIDTable(const LongUUID_t uuid, uint8_t *recoveredType)
-{
- unsigned i;
- for (i = 0; i < uuidTableEntries; i++) {
- if (memcmp(convertedUUIDTable[i].uuid,
- uuid,
- LENGTH_OF_LONG_UUID) == 0) {
- *recoveredType = convertedUUIDTable[i].type;
- return true;
- }
- }
-
- return false;
-}
-
-static void
-addToConvertedUUIDTable(const LongUUID_t uuid, uint8_t type)
-{
- if (uuidTableEntries == UUID_TABLE_MAX_ENTRIES) {
- return; /* recovery needed; or at least the user should be
- * warned about this fact.*/
- }
-
- memcpy(convertedUUIDTable[uuidTableEntries].uuid, uuid,LENGTH_OF_LONG_UUID);
- convertedUUIDTable[uuidTableEntries].type = type;
- uuidTableEntries++;
-}
-
-/**
- * The nRF transport has its own 3-byte representation of a UUID. If the user-
- * specified UUID is 128-bits wide, then the UUID base needs to be added to the
- * soft-device and converted to a 3-byte handle before being used further. This
- * function is responsible for this translation of user-specified UUIDs into
- * nRF's representation.
- *
- * @param[in] uuid
- * user-specified UUID
- * @return nRF
- * 3-byte UUID (containing a type and 16-bit UUID) representation
- * to be used with SVC calls.
- */
-ble_uuid_t custom_convert_to_nordic_uuid(const UUID &uuid)
-{
- ble_uuid_t nordicUUID = {
- .uuid = uuid.getShortUUID(),
- .type = BLE_UUID_TYPE_UNKNOWN /* to be set below */
- };
-
- if (uuid.shortOrLong() == UUID::UUID_TYPE_SHORT) {
- nordicUUID.type = BLE_UUID_TYPE_BLE;
- } else {
- if (!lookupConvertedUUIDTable(uuid.getBaseUUID(), &nordicUUID.type)) {
- nordicUUID.type = custom_add_uuid_base(uuid.getBaseUUID());
- addToConvertedUUIDTable(uuid.getBaseUUID(), nordicUUID.type);
- }
- }
-
- return nordicUUID;
-}
-
-/**************************************************************************/
-/*!
- @brief Adds the base UUID to the custom service. All UUIDs used
- by this service are based on this 128-bit UUID.
-
- @note This UUID needs to be added to the SoftDevice stack before
- adding the service's primary service via
- 'sd_ble_gatts_service_add'
-
- @param[in] p_uuid_base A pointer to the 128-bit UUID array (8*16)
-
- @returns The UUID type.
- A return value of 0 should be considered an error.
-
- @retval 0x00 BLE_UUID_TYPE_UNKNOWN
- @retval 0x01 BLE_UUID_TYPE_BLE
- @retval 0x02 BLE_UUID_TYPE_VENDOR_BEGIN
-
- @section EXAMPLE
- @code
-
- // Take note that bytes 2/3 are blank since these are used to identify
- // the primary service and individual characteristics
- #define CFG_CUSTOM_UUID_BASE "\x6E\x40\x00\x00\xB5\xA3\xF3\x93\xE0\xA9\xE5\x0E\x24\xDC\xCA\x9E"
-
- uint8_t uuid_type = custom_add_uuid_base(CFG_CUSTOM_UUID_BASE);
- ASSERT(uuid_type > 0, ERROR_NOT_FOUND);
-
- // We can now safely add the primary service and any characteristics
- // for our custom service ...
-
- @endcode
-*/
-/**************************************************************************/
-uint8_t custom_add_uuid_base(uint8_t const *const p_uuid_base)
-{
- ble_uuid128_t base_uuid;
- uint8_t uuid_type = 0;
-
- /* Reverse the bytes since ble_uuid128_t is LSB */
- for (uint8_t i = 0; i<16; i++) {
- base_uuid.uuid128[i] = p_uuid_base[15 - i];
- }
-
- ASSERT_INT( ERROR_NONE, sd_ble_uuid_vs_add( &base_uuid, &uuid_type ), 0);
-
- return uuid_type;
-}
-
-/**************************************************************************/
-/*!
-
-*/
-/**************************************************************************/
-error_t custom_decode_uuid_base(uint8_t const *const p_uuid_base,
- ble_uuid_t *p_uuid)
-{
- LongUUID_t uuid_base_le;
-
- /* Reverse the bytes since ble_uuid128_t is LSB */
- for (uint8_t i = 0; i<16; i++) {
- uuid_base_le[i] = p_uuid_base[15 - i];
- }
-
- ASSERT_STATUS( sd_ble_uuid_decode(16, uuid_base_le, p_uuid));
-
- return ERROR_NONE;
-}
-
-/**************************************************************************/
-/*!
- @brief Adds a new characteristic to the custom service, assigning
- properties, a UUID add-on value, etc.
-
- @param[in] service_handle
- @param[in] p_uuid The 16-bit value to add to the base UUID
- for this characteristic (normally >1
- since 1 is typically used by the primary
- service).
- @param[in] char_props The characteristic properties, as
- defined by ble_gatt_char_props_t
- @param[in] max_length The maximum length of this characeristic
- @param[in] p_char_handle
-
- @returns
- @retval ERROR_NONE Everything executed normally
-*/
-/**************************************************************************/
-error_t custom_add_in_characteristic(uint16_t service_handle,
- ble_uuid_t *p_uuid,
- uint8_t properties,
- uint8_t *p_data,
- uint16_t min_length,
- uint16_t max_length,
- ble_gatts_char_handles_t *p_char_handle)
-{
- /* Characteristic metadata */
- ble_gatts_attr_md_t cccd_md;
- ble_gatt_char_props_t char_props;
-
- memcpy(&char_props, &properties, 1);
-
- if (char_props.notify || char_props.indicate) {
- /* Notification requires cccd */
- memclr_( &cccd_md, sizeof(ble_gatts_attr_md_t));
- cccd_md.vloc = BLE_GATTS_VLOC_STACK;
- BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.read_perm);
- BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.write_perm);
- }
-
- ble_gatts_char_md_t char_md = {0};
-
- char_md.char_props = char_props;
- char_md.p_cccd_md =
- (char_props.notify || char_props.indicate) ? &cccd_md : NULL;
-
- /* Attribute declaration */
- ble_gatts_attr_md_t attr_md = {0};
-
- attr_md.vloc = BLE_GATTS_VLOC_STACK;
- attr_md.vlen = (min_length == max_length) ? 0 : 1;
-
- if (char_props.read || char_props.notify || char_props.indicate) {
- BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.read_perm);
- }
-
- if (char_props.write) {
- BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.write_perm);
- }
-
- ble_gatts_attr_t attr_char_value = {0};
-
- attr_char_value.p_uuid = p_uuid;
- attr_char_value.p_attr_md = &attr_md;
- attr_char_value.init_len = min_length;
- attr_char_value.max_len = max_length;
- attr_char_value.p_value = p_data;
-
- ASSERT_STATUS ( sd_ble_gatts_characteristic_add(service_handle,
- &char_md,
- &attr_char_value,
- p_char_handle));
-
- return ERROR_NONE;
-}
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "custom_helper.h"
+
+/*
+ * The current version of the soft-device doesn't handle duplicate 128-bit UUIDs
+ * very well. It is therefore necessary to filter away duplicates before
+ * passing long UUIDs to sd_ble_uuid_vs_add(). The following types and data
+ * structures involved in maintaining a local cache of 128-bit UUIDs.
+ */
+typedef struct {
+ LongUUID_t uuid;
+ uint8_t type;
+} converted_uuid_table_entry_t;
+static const unsigned UUID_TABLE_MAX_ENTRIES = 8; /* This is the maximum number
+ * of 128-bit UUIDs with distinct bases that
+ * we expect to be in use; increase this
+ * limit if needed. */
+static unsigned uuidTableEntries = 0; /* current usage of the table */
+converted_uuid_table_entry_t convertedUUIDTable[UUID_TABLE_MAX_ENTRIES];
+
+/**
+ * lookup the cache of previously converted 128-bit UUIDs to find a type value.
+ * @param uuid long UUID
+ * @param recoveredType the type field of the 3-byte nRF's uuid.
+ * @return true if a match is found.
+ */
+static bool
+lookupConvertedUUIDTable(const LongUUID_t uuid, uint8_t *recoveredType)
+{
+ unsigned i;
+ for (i = 0; i < uuidTableEntries; i++) {
+ if (memcmp(convertedUUIDTable[i].uuid,
+ uuid,
+ LENGTH_OF_LONG_UUID) == 0) {
+ *recoveredType = convertedUUIDTable[i].type;
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static void
+addToConvertedUUIDTable(const LongUUID_t uuid, uint8_t type)
+{
+ if (uuidTableEntries == UUID_TABLE_MAX_ENTRIES) {
+ return; /* recovery needed; or at least the user should be
+ * warned about this fact.*/
+ }
+
+ memcpy(convertedUUIDTable[uuidTableEntries].uuid, uuid,LENGTH_OF_LONG_UUID);
+ convertedUUIDTable[uuidTableEntries].type = type;
+ uuidTableEntries++;
+}
+
+/**
+ * The nRF transport has its own 3-byte representation of a UUID. If the user-
+ * specified UUID is 128-bits wide, then the UUID base needs to be added to the
+ * soft-device and converted to a 3-byte handle before being used further. This
+ * function is responsible for this translation of user-specified UUIDs into
+ * nRF's representation.
+ *
+ * @param[in] uuid
+ * user-specified UUID
+ * @return nRF
+ * 3-byte UUID (containing a type and 16-bit UUID) representation
+ * to be used with SVC calls.
+ */
+ble_uuid_t custom_convert_to_nordic_uuid(const UUID &uuid)
+{
+ ble_uuid_t nordicUUID = {
+ .uuid = uuid.getShortUUID(),
+ .type = BLE_UUID_TYPE_UNKNOWN /* to be set below */
+ };
+
+ if (uuid.shortOrLong() == UUID::UUID_TYPE_SHORT) {
+ nordicUUID.type = BLE_UUID_TYPE_BLE;
+ } else {
+ if (!lookupConvertedUUIDTable(uuid.getBaseUUID(), &nordicUUID.type)) {
+ nordicUUID.type = custom_add_uuid_base(uuid.getBaseUUID());
+ addToConvertedUUIDTable(uuid.getBaseUUID(), nordicUUID.type);
+ }
+ }
+
+ return nordicUUID;
+}
+
+/**************************************************************************/
+/*!
+ @brief Adds the base UUID to the custom service. All UUIDs used
+ by this service are based on this 128-bit UUID.
+
+ @note This UUID needs to be added to the SoftDevice stack before
+ adding the service's primary service via
+ 'sd_ble_gatts_service_add'
+
+ @param[in] p_uuid_base A pointer to the 128-bit UUID array (8*16)
+
+ @returns The UUID type.
+ A return value of 0 should be considered an error.
+
+ @retval 0x00 BLE_UUID_TYPE_UNKNOWN
+ @retval 0x01 BLE_UUID_TYPE_BLE
+ @retval 0x02 BLE_UUID_TYPE_VENDOR_BEGIN
+
+ @section EXAMPLE
+ @code
+
+ // Take note that bytes 2/3 are blank since these are used to identify
+ // the primary service and individual characteristics
+ #define CFG_CUSTOM_UUID_BASE "\x6E\x40\x00\x00\xB5\xA3\xF3\x93\xE0\xA9\xE5\x0E\x24\xDC\xCA\x9E"
+
+ uint8_t uuid_type = custom_add_uuid_base(CFG_CUSTOM_UUID_BASE);
+ ASSERT(uuid_type > 0, ERROR_NOT_FOUND);
+
+ // We can now safely add the primary service and any characteristics
+ // for our custom service ...
+
+ @endcode
+*/
+/**************************************************************************/
+uint8_t custom_add_uuid_base(uint8_t const *const p_uuid_base)
+{
+ ble_uuid128_t base_uuid;
+ uint8_t uuid_type = 0;
+
+ /* Reverse the bytes since ble_uuid128_t is LSB */
+ for (uint8_t i = 0; i<16; i++) {
+ base_uuid.uuid128[i] = p_uuid_base[15 - i];
+ }
+
+ ASSERT_INT( ERROR_NONE, sd_ble_uuid_vs_add( &base_uuid, &uuid_type ), 0);
+
+ return uuid_type;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+error_t custom_decode_uuid_base(uint8_t const *const p_uuid_base,
+ ble_uuid_t *p_uuid)
+{
+ LongUUID_t uuid_base_le;
+
+ /* Reverse the bytes since ble_uuid128_t is LSB */
+ for (uint8_t i = 0; i<16; i++) {
+ uuid_base_le[i] = p_uuid_base[15 - i];
+ }
+
+ ASSERT_STATUS( sd_ble_uuid_decode(16, uuid_base_le, p_uuid));
+
+ return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Adds a new characteristic to the custom service, assigning
+ properties, a UUID add-on value, etc.
+
+ @param[in] service_handle
+ @param[in] p_uuid The 16-bit value to add to the base UUID
+ for this characteristic (normally >1
+ since 1 is typically used by the primary
+ service).
+ @param[in] char_props The characteristic properties, as
+ defined by ble_gatt_char_props_t
+ @param[in] max_length The maximum length of this characeristic
+ @param[in] p_char_handle
+
+ @returns
+ @retval ERROR_NONE Everything executed normally
+*/
+/**************************************************************************/
+error_t custom_add_in_characteristic(uint16_t service_handle,
+ ble_uuid_t *p_uuid,
+ uint8_t properties,
+ uint8_t *p_data,
+ uint16_t min_length,
+ uint16_t max_length,
+ ble_gatts_char_handles_t *p_char_handle)
+{
+ /* Characteristic metadata */
+ ble_gatts_attr_md_t cccd_md;
+ ble_gatt_char_props_t char_props;
+
+ memcpy(&char_props, &properties, 1);
+
+ if (char_props.notify || char_props.indicate) {
+ /* Notification requires cccd */
+ memclr_( &cccd_md, sizeof(ble_gatts_attr_md_t));
+ cccd_md.vloc = BLE_GATTS_VLOC_STACK;
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.read_perm);
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.write_perm);
+ }
+
+ ble_gatts_char_md_t char_md = {0};
+
+ char_md.char_props = char_props;
+ char_md.p_cccd_md =
+ (char_props.notify || char_props.indicate) ? &cccd_md : NULL;
+
+ /* Attribute declaration */
+ ble_gatts_attr_md_t attr_md = {0};
+
+ attr_md.vloc = BLE_GATTS_VLOC_STACK;
+ attr_md.vlen = (min_length == max_length) ? 0 : 1;
+
+ if (char_props.read || char_props.notify || char_props.indicate) {
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.read_perm);
+ }
+
+ if (char_props.write) {
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.write_perm);
+ }
+
+ ble_gatts_attr_t attr_char_value = {0};
+
+ attr_char_value.p_uuid = p_uuid;
+ attr_char_value.p_attr_md = &attr_md;
+ attr_char_value.init_len = min_length;
+ attr_char_value.max_len = max_length;
+ attr_char_value.p_value = p_data;
+
+ ASSERT_STATUS ( sd_ble_gatts_characteristic_add(service_handle,
+ &char_md,
+ &attr_char_value,
+ p_char_handle));
+
+ return ERROR_NONE;
+}