File content as of revision 37:c29c330d942c:

/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
 *
 * The information contained herein is confidential property of Nordic Semiconductor. The use,
 * copying, transfer or disclosure of such information is prohibited except by express written
 * agreement with Nordic Semiconductor.
 *
 */
/**
  @addtogroup BLE_GATTS Generic Attribute Profile (GATT) Server
  @{
  @brief  Definitions and prototypes for the GATTS interface.
 */

#ifndef BLE_GATTS_H__
#define BLE_GATTS_H__

#include "ble_types.h"
#include "ble_ranges.h"
#include "ble_l2cap.h"
#include "ble_gap.h"
#include "ble_gatt.h"
#include "nrf_svc.h"

/** @addtogroup BLE_GATTS_ENUMERATIONS Enumerations
 * @{ */

/**
 * @brief GATTS API SVC numbers.
 */
enum BLE_GATTS_SVCS
{
  SD_BLE_GATTS_SERVICE_ADD = BLE_GATTS_SVC_BASE, /**< Add a service. */
  SD_BLE_GATTS_INCLUDE_ADD,                      /**< Add an included service. */
  SD_BLE_GATTS_CHARACTERISTIC_ADD,               /**< Add a characteristic. */
  SD_BLE_GATTS_DESCRIPTOR_ADD,                   /**< Add a generic attribute. */
  SD_BLE_GATTS_VALUE_SET,                        /**< Set an attribute value. */
  SD_BLE_GATTS_VALUE_GET,                        /**< Get an attribute value. */
  SD_BLE_GATTS_HVX,                              /**< Handle Value Notification or Indication. */
  SD_BLE_GATTS_SERVICE_CHANGED,                  /**< Perform a Service Changed Indication to one or more peers. */
  SD_BLE_GATTS_RW_AUTHORIZE_REPLY,               /**< Reply to an authorization request for a read or write operation on one or more attributes. */ 
  SD_BLE_GATTS_SYS_ATTR_SET,                     /**< Set the persistent system attributes for a connection. */  
  SD_BLE_GATTS_SYS_ATTR_GET,                     /**< Get updated persistent system attributes after terminating a connection. */
};

/** @} */

/** @addtogroup BLE_GATTS_DEFINES Defines
 * @{ */

/** @brief Only the default MTU size of 23 is currently supported. */
#define GATT_RX_MTU 23

/** @defgroup BLE_ERRORS_GATTS SVC return values specific to GATTS
 * @{ */
#define BLE_ERROR_GATTS_INVALID_ATTR_TYPE   (NRF_GATTS_ERR_BASE + 0x000) /**< Invalid attribute type. */
#define BLE_ERROR_GATTS_SYS_ATTR_MISSING    (NRF_GATTS_ERR_BASE + 0x001) /**< System Attributes missing. */
/** @} */

/** @defgroup BLE_GATTS_ATTR_LENS_MAX Maximum attribute lengths
 * @{ */
#define BLE_GATTS_FIX_ATTR_LEN_MAX (510)  /**< Maximum length for fixed length Attribute Values. */
#define BLE_GATTS_VAR_ATTR_LEN_MAX (512)  /**< Maximum length for variable length Attribute Values. */ 
/** @} */

/** @defgroup BLE_GATTS_SRVC_TYPES GATT Server Service Types
 * @{ */
#define BLE_GATTS_SRVC_TYPE_INVALID          0x00  /**< Invalid Service Type. */
#define BLE_GATTS_SRVC_TYPE_PRIMARY          0x01  /**< Primary Service. */
#define BLE_GATTS_SRVC_TYPE_SECONDARY        0x02  /**< Secondary Type. */
/** @} */


/** @defgroup BLE_GATTS_ATTR_TYPES GATT Server Attribute Types
 * @{ */
#define BLE_GATTS_ATTR_TYPE_INVALID         0x00  /**< Invalid Attribute Type. */
#define BLE_GATTS_ATTR_TYPE_PRIM_SRVC_DECL  0x01  /**< Primary Service Declaration. */
#define BLE_GATTS_ATTR_TYPE_SEC_SRVC_DECL   0x02  /**< Secondary Service Declaration. */
#define BLE_GATTS_ATTR_TYPE_INC_DECL        0x03  /**< Include Declaration. */
#define BLE_GATTS_ATTR_TYPE_CHAR_DECL       0x04  /**< Characteristic Declaration. */
#define BLE_GATTS_ATTR_TYPE_CHAR_VAL        0x05  /**< Characteristic Value. */
#define BLE_GATTS_ATTR_TYPE_DESC            0x06  /**< Descriptor. */
#define BLE_GATTS_ATTR_TYPE_OTHER           0x07  /**< Other, non-GATT specific type. */
/** @} */


/** @defgroup BLE_GATTS_OPS GATT Server Operations
 * @{ */
#define BLE_GATTS_OP_INVALID                0x00  /**< Invalid Operation. */
#define BLE_GATTS_OP_WRITE_REQ              0x01  /**< Write Request. */
#define BLE_GATTS_OP_WRITE_CMD              0x02  /**< Write Command. */
#define BLE_GATTS_OP_SIGN_WRITE_CMD         0x03  /**< Signed Write Command. */
#define BLE_GATTS_OP_PREP_WRITE_REQ         0x04  /**< Prepare Write Request. */
#define BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL  0x05  /**< Execute Write Request: Cancel all prepared writes. */
#define BLE_GATTS_OP_EXEC_WRITE_REQ_NOW     0x06  /**< Execute Write Request: Immediately execute all prepared writes. */
/** @} */

/** @defgroup BLE_GATTS_VLOCS GATT Value Locations
 * @{ */
#define BLE_GATTS_VLOC_INVALID       0x00  /**< Invalid Location. */
#define BLE_GATTS_VLOC_STACK         0x01  /**< Attribute Value is located in stack memory, no user memory is required. */
#define BLE_GATTS_VLOC_USER          0x02  /**< Attribute Value is located in user memory. This requires the user to maintain a valid buffer through the lifetime of the attribute, since the stack
                                                will read and write directly to the memory using the pointer provided in the APIs. There are no alignment requirements for the buffer. */
/** @} */

/** @defgroup BLE_GATTS_AUTHORIZE_TYPES GATT Server Authorization Types
 * @{ */
#define BLE_GATTS_AUTHORIZE_TYPE_INVALID    0x00  /**< Invalid Type. */
#define BLE_GATTS_AUTHORIZE_TYPE_READ       0x01  /**< Authorize a Read Operation. */
#define BLE_GATTS_AUTHORIZE_TYPE_WRITE      0x02  /**< Authorize a Write Request Operation. */
/** @} */


/** @} */

/** @addtogroup BLE_GATTS_STRUCTURES Structures
 * @{ */

/**
 * @brief BLE GATTS init options
 */
typedef struct
{
  uint8_t   service_changed:1;             /**< Include the Service Changed characteristic in the local attributes. */
} ble_gatts_enable_params_t;

/**@brief Attribute metadata. */
typedef struct
{
  ble_gap_conn_sec_mode_t read_perm;       /**< Read permissions. */
  ble_gap_conn_sec_mode_t write_perm;      /**< Write permissions. */
  uint8_t                 vlen       :1;   /**< Variable length attribute. */
  uint8_t                 vloc       :2;   /**< Value location, see @ref BLE_GATTS_VLOCS.*/
  uint8_t                 rd_auth    :1;   /**< Read Authorization and value will be requested from the application on every read operation. */ 
  uint8_t                 wr_auth    :1;   /**< Write Authorization will be requested from the application on every Write Request operation (but not Write Command). */
} ble_gatts_attr_md_t;


/**@brief GATT Attribute. */
typedef struct
{
  ble_uuid_t*          p_uuid;          /**< Pointer to the attribute UUID. */
  ble_gatts_attr_md_t* p_attr_md;       /**< Pointer to the attribute metadata structure. */
  uint16_t             init_len;        /**< Initial attribute value length in bytes. */
  uint16_t             init_offs;       /**< Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */
  uint16_t             max_len;         /**< Maximum attribute value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */
  uint8_t*             p_value;         /**< Pointer to the attribute data. Please note that if the @ref BLE_GATTS_VLOC_USER value location is selected in the attribute metadata, this will have to point to a buffer
                                             that remains valid through the lifetime of the attribute. This excludes usage of automatic variables that may go out of scope or any other temporary location. 
                                             The stack may access that memory directly without the application's knowledge. */
} ble_gatts_attr_t;


/**@brief GATT Attribute Context. */
typedef struct
{
  ble_uuid_t           srvc_uuid;       /**< Service UUID. */
  ble_uuid_t           char_uuid;       /**< Characteristic UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
  ble_uuid_t           desc_uuid;       /**< Descriptor UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
  uint16_t             srvc_handle;     /**< Service Handle. */
  uint16_t             value_handle;    /**< Characteristic Handle if applicable (BLE_GATT_HANDLE_INVALID if N/A). */
  uint8_t              type;            /**< Attribute Type, see @ref BLE_GATTS_ATTR_TYPES. */
} ble_gatts_attr_context_t;


/**@brief GATT Characteristic Presentation Format. */
typedef struct
{
  uint8_t          format;      /**< Format of the value, see @ref BLE_GATT_CPF_FORMATS. */
  int8_t           exponent;    /**< Exponent for integer data types. */
  uint16_t         unit;        /**< UUID from Bluetooth Assigned Numbers. */
  uint8_t          name_space;  /**< Namespace from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
  uint16_t         desc;        /**< Namespace description from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
} ble_gatts_char_pf_t;


/**@brief GATT Characteristic metadata. */
typedef struct
{
  ble_gatt_char_props_t       char_props;               /**< Characteristic Properties. */
  ble_gatt_char_ext_props_t   char_ext_props;           /**< Characteristic Extended Properties. */
  uint8_t*                    p_char_user_desc;         /**< Pointer to a UTF-8, NULL if the descriptor is not required. */
  uint16_t                    char_user_desc_max_size;  /**< The maximum size in bytes of the user description descriptor. */
  uint16_t                    char_user_desc_size;      /**< The size of the user description, must be smaller or equal to char_user_desc_max_size. */ 
  ble_gatts_char_pf_t*        p_char_pf;                /**< Pointer to a presentation format structure or NULL if the descriptor is not required. */
  ble_gatts_attr_md_t*        p_user_desc_md;           /**< Attribute metadata for the User Description descriptor, or NULL for default values. */
  ble_gatts_attr_md_t*        p_cccd_md;                /**< Attribute metadata for the Client Characteristic Configuration Descriptor, or NULL for default values. */
  ble_gatts_attr_md_t*        p_sccd_md;                /**< Attribute metadata for the Server Characteristic Configuration Descriptor, or NULL for default values. */
} ble_gatts_char_md_t;


/**@brief GATT Characteristic Definition Handles. */
typedef struct
{
  uint16_t          value_handle;       /**< Handle to the characteristic value. */
  uint16_t          user_desc_handle;   /**< Handle to the User Description descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
  uint16_t          cccd_handle;        /**< Handle to the Client Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
  uint16_t          sccd_handle;        /**< Handle to the Server Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
} ble_gatts_char_handles_t;


/**@brief GATT HVx parameters. */
typedef struct
{
  uint16_t          handle;             /**< Characteristic Value Handle. */
  uint8_t           type;               /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
  uint16_t          offset;             /**< Offset within the attribute value. */
  uint16_t*         p_len;              /**< Length in bytes to be written, length in bytes written after successful return. */
  uint8_t*          p_data;             /**< Actual data content, use NULL to use the current attribute value. */
} ble_gatts_hvx_params_t;

/**@brief GATT Read Authorization parameters. */
typedef struct
{
  uint16_t          gatt_status;        /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
  uint8_t           update : 1;         /**< If set, data supplied in p_data will be used in the ATT response. */
  uint16_t          offset;             /**< Offset of the attribute value being updated. */
  uint16_t          len;                /**< Length in bytes of the value in p_data pointer, see @ref BLE_GATTS_ATTR_LENS_MAX. */
  uint8_t*          p_data;             /**< Pointer to new value used to update the attribute value. */
} ble_gatts_read_authorize_params_t;

/**@brief GATT Write Authorisation parameters. */
typedef struct
{
  uint16_t          gatt_status;        /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
} ble_gatts_write_authorize_params_t;

/**@brief GATT Read or Write Authorize Reply parameters. */
typedef struct
{
  uint8_t                               type;   /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
  union {
    ble_gatts_read_authorize_params_t   read;   /**< Read authorization parameters. */
    ble_gatts_write_authorize_params_t  write;  /**< Write authorization parameters. */
  } params;
} ble_gatts_rw_authorize_reply_params_t;


/**
 * @brief GATT Server Event IDs.
 */
enum BLE_GATTS_EVTS
{
  BLE_GATTS_EVT_WRITE = BLE_GATTS_EVT_BASE,       /**< Write operation performed. */
  BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST,             /**< Read/Write Authorization request. */
  BLE_GATTS_EVT_SYS_ATTR_MISSING,                 /**< A persistent system attribute access is pending, awaiting a sd_ble_gatts_sys_attr_set(). */
  BLE_GATTS_EVT_HVC,                              /**< Handle Value Confirmation. */
  BLE_GATTS_EVT_SC_CONFIRM,                       /**< Service Changed Confirmation. */
  BLE_GATTS_EVT_TIMEOUT                           /**< Timeout. */
};


/**@brief Event structure for BLE_GATTS_EVT_WRITE. */
typedef struct
{
  uint16_t                    handle;             /**< Attribute Handle. */
  uint8_t                     op;                 /**< Type of write operation, see @ref BLE_GATTS_OPS. */
  ble_gatts_attr_context_t    context;            /**< Attribute Context. */
  uint16_t                    offset;             /**< Offset for the write operation. */
  uint16_t                    len;                /**< Length of the incoming data. */
  uint8_t                     data[1];            /**< Incoming data, variable length. */
} ble_gatts_evt_write_t;

/**@brief Event structure for authorize read request. */
typedef struct
{
  uint16_t                    handle;             /**< Attribute Handle. */
  ble_gatts_attr_context_t    context;            /**< Attribute Context. */
  uint16_t                    offset;             /**< Offset for the read operation. */
} ble_gatts_evt_read_t;

/**@brief Event structure for BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST. */
typedef struct
{
  uint8_t                     type;             /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
  union {
    ble_gatts_evt_read_t      read;             /**< Attribute Read Parameters. */
    ble_gatts_evt_write_t     write;            /**< Attribute Write Parameters. */
  } request;
} ble_gatts_evt_rw_authorize_request_t;

/**@brief Event structure for BLE_GATTS_EVT_SYS_ATTR_MISSING. */
typedef struct
{
  uint8_t hint;
} ble_gatts_evt_sys_attr_missing_t;


/**@brief Event structure for BLE_GATTS_EVT_HVC. */
typedef struct
{
  uint16_t          handle;                       /**< Attribute Handle. */
} ble_gatts_evt_hvc_t;

/**@brief Event structure for BLE_GATTS_EVT_TIMEOUT. */
typedef struct
{
  uint8_t          src;                       /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
} ble_gatts_evt_timeout_t;


/**@brief GATT Server event callback event structure. */
typedef struct
{
  uint16_t conn_handle;                                       /**< Connection Handle on which event occurred. */
  union
  {
    ble_gatts_evt_write_t                 write;              /**< Write Event Parameters. */
    ble_gatts_evt_rw_authorize_request_t  authorize_request;  /**< Read or Write Authorize Request Parameters. */
    ble_gatts_evt_sys_attr_missing_t      sys_attr_missing;   /**< System attributes missing. */
    ble_gatts_evt_hvc_t                   hvc;                /**< Handle Value Confirmation Event Parameters. */
    ble_gatts_evt_timeout_t               timeout;            /**< Timeout Event. */
  } params;
} ble_gatts_evt_t;

/** @} */

/** @addtogroup BLE_GATTS_FUNCTIONS Functions
 * @{ */

/**@brief Add a service declaration to the local server ATT table.
 *
 * @param[in] type      Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES.
 * @param[in] p_uuid    Pointer to service UUID.
 * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
 *
 * @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to
 *       add a secondary service declaration that is not referenced by another service later in the ATT table.
 *
 * @return @ref NRF_SUCCESS Successfully added a service declaration.
 * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table.
 * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
 * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
 */
SVCALL(SD_BLE_GATTS_SERVICE_ADD, uint32_t, sd_ble_gatts_service_add(uint8_t type, ble_uuid_t const*const p_uuid, uint16_t *const p_handle));


/**@brief Add an include declaration to the local server ATT table.
 *
 * @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential addition is supported at this time). 
 *
 * @note The included service must already be present in the ATT table prior to this call.
 *
 * @param[in] service_handle    Handle of the service where the included service is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
 * @param[in] inc_srvc_handle   Handle of the included service.
 * @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored.
 *
 * @return @ref NRF_SUCCESS Successfully added an include declaration.
 * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services.
 * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
 * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed.
 * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
 * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
 */
SVCALL(SD_BLE_GATTS_INCLUDE_ADD, uint32_t, sd_ble_gatts_include_add(uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *const p_include_handle));


/**@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the local server ATT table.
 *
 * @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential addition is supported at this time). 
 *
 * @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writeable auxiliaries bits,
 *       readable (no security) and writeable (selectable) CCCDs and SCCDs and valid presentation format values.
 *
 * @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions.
 *
 * @param[in] service_handle    Handle of the service where the characteristic is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
 * @param[in] p_char_md         Characteristic metadata.
 * @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value.
 * @param[out] p_handles        Pointer to the structure where the assigned handles will be stored.
 *
 * @return @ref NRF_SUCCESS Successfully added a characteristic.
 * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
 * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required.
 * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
 * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
 * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
 */
SVCALL(SD_BLE_GATTS_CHARACTERISTIC_ADD, uint32_t, sd_ble_gatts_characteristic_add(uint16_t service_handle, ble_gatts_char_md_t const*const p_char_md, ble_gatts_attr_t const*const p_attr_char_value, ble_gatts_char_handles_t *const p_handles));


/**@brief Add a descriptor to the local server ATT table.
 *
 * @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential addition is supported at this time). 
 *
 * @param[in] char_handle   Handle of the characteristic where the descriptor is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
 * @param[in] p_attr        Pointer to the attribute structure.
 * @param[out] p_handle     Pointer to a 16-bit word where the assigned handle will be stored.
 *
 * @return @ref NRF_SUCCESS Successfully added a descriptor.
 * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
 * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required.
 * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
 * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
 * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
 */
SVCALL(SD_BLE_GATTS_DESCRIPTOR_ADD, uint32_t, sd_ble_gatts_descriptor_add(uint16_t char_handle, ble_gatts_attr_t const * const p_attr, uint16_t* const p_handle));

/**@brief Set the value of a given attribute.
 *
 * @param[in] handle    Attribute handle.
 * @param[in] offset    Offset in bytes to write from.
 * @param[in,out] p_len Length in bytes to be written, length in bytes written after successful return.
 * @param[in] p_value   Pointer to a buffer (at least len bytes long) containing the desired attribute value. If value is stored in user memory, only the attribute length is updated when p_value == NULL.
 *
 * @return @ref NRF_SUCCESS Successfully set the value of the attribute.
 * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
 * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
 * @return @ref NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application.
 * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
 */
SVCALL(SD_BLE_GATTS_VALUE_SET, uint32_t, sd_ble_gatts_value_set(uint16_t handle, uint16_t offset, uint16_t* const p_len, uint8_t const * const p_value));

/**@brief Get the value of a given attribute.
 *
 * @param[in] handle     Attribute handle.
 * @param[in] offset     Offset in bytes to read from.
 * @param[in,out] p_len  Length in bytes to be read, total length of attribute value (in bytes, starting from offset) after successful return.
 * @param[in,out] p_data Pointer to a buffer (at least len bytes long) where to store the attribute value. Set to NULL to obtain the complete length of attribute value.
 *
 * @note                 If the attribute value is longer than the size of the supplied buffer,
 *                       p_len will return the total attribute value length (excluding offset),
 *                       and not the number of bytes actually returned in p_data.
 *                       The application may use this information to allocate a suitable buffer size.
 * 
 * @return @ref NRF_SUCCESS Successfully retrieved the value of the attribute.
 * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
 */
SVCALL(SD_BLE_GATTS_VALUE_GET, uint32_t, sd_ble_gatts_value_get(uint16_t handle, uint16_t offset, uint16_t *const p_len, uint8_t* const p_data));

/**@brief Notify or Indicate an attribute value.
 *
 * @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation
 *          (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that
 *          the application can atomically perform a value update and a server initiated transaction with a single API call.
 *          If the application chooses to indicate an attribute value, a @ref BLE_GATTS_EVT_HVC will be sent up as soon as the confirmation arrives from
 *          the peer.
 *
 * @note    The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution. 
 *          When receiveing the error codes @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and 
 *          @ref BLE_ERROR_NO_TX_BUFFERS the ATT table has been updated.
 *          The caller can check whether the value has been updated by looking at the contents of *(p_hvx_params->p_len).
 *
 * @note    It is important to note that a notification will <b>consume an application buffer</b>, and will therefore 
 *          generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. An indication on the other hand will use the 
 *          standard server internal buffer and thus will only generate a @ref BLE_GATTS_EVT_HVC event as soon as the confirmation 
 *          has been received from the peer. Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
 *
 * @param[in] conn_handle  Connection handle.
 * @param[in] p_hvx_params Pointer to an HVx parameters structure. If the p_data member contains a non-NULL pointer the attribute value will be updated with
 *                         the contents pointed by it before sending the notification or indication.
 *
 * @return @ref NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value.
 * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
 * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate.
 * @return @ref BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated.
 * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
 * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
 * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
 * @return @ref NRF_ERROR_BUSY Procedure already in progress.
 * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
 * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers to send the data, applies only to notifications.
 */
SVCALL(SD_BLE_GATTS_HVX, uint32_t, sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const*const p_hvx_params));

/**@brief Indicate the Service Changed attribute value.
 *
 * @details This call will send a Handle Value Indication to one or more peers connected to inform them that the attribute
 *          table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will
 *          be issued.
 *
 * @note    Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here.
 *
 * @param[in] conn_handle  Connection handle.
 * @param[in] start_handle Start of affected attribute handle range.
 * @param[in] end_handle   End of affected attribute handle range.
 *
 * @return @ref NRF_SUCCESS Successfully queued the Service Changed indication for transmission.
 * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
 * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application.
 * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
 * @return @ref NRF_ERROR_BUSY Procedure already in progress.
 * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
 */
SVCALL(SD_BLE_GATTS_SERVICE_CHANGED, uint32_t, sd_ble_gatts_service_changed(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle));

/**@brief Respond to a Read/Write authorization request.
 *
 * @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application.
 *
 * @param[in] conn_handle                 Connection handle.
 * @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application.
 *
 * @return @ref NRF_SUCCESS               Successfully queued a response to the peer, and in the case of a write operation, ATT table updated.
 * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @return @ref NRF_ERROR_INVALID_STATE   No authorization request pending.
 * @return @ref NRF_ERROR_INVALID_PARAM   Authorization op invalid,
 *                                         or for Read Authorization reply: requested handles not replied with,
 *                                         or for Write Authorization reply: handle supplied does not match requested handle.
 */
SVCALL(SD_BLE_GATTS_RW_AUTHORIZE_REPLY, uint32_t, sd_ble_gatts_rw_authorize_reply(uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const*const p_rw_authorize_reply_params));


/**@brief Update persistent system attribute information.
 *
 * @details Supply to the stack information about persistent system attributes.
 *          This call is legal in the connected state only, and is usually 
 *          made immediately after a connection is established and the bond identified.
 *          usually as a response to a BLE_GATTS_EVT_SYS_ATTR_MISSING.
 *
 *          p_sysattrs may point directly to the application's stored copy of the struct.
 *          If the pointer is NULL, the system attribute info is initialized, assuming that
 *          the application does not have any previously saved data for this bond.
 *
 * @note The state of persistent system attributes is reset upon connection and then remembered for its duration. 
 *
 * @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially.
 *       This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or
 *       reset the SoftDevice to return to a known state.
 *
 * @param[in]  conn_handle        Connection handle.
 * @param[in]  p_sys_attr_data    Pointer to a saved copy of system attributes supplied to the stack, or NULL.
 * @param[in]  len                Size of data pointed by p_sys_attr_data, in octets. 
 *
 * @return @ref NRF_SUCCESS Successfully set the system attribute information.
 * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @return @ref NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get.
 * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
 */ 
SVCALL(SD_BLE_GATTS_SYS_ATTR_SET, uint32_t, sd_ble_gatts_sys_attr_set(uint16_t conn_handle, uint8_t const*const p_sys_attr_data, uint16_t len)); 

 
/**@brief Retrieve persistent system attribute information from the stack.
 *
 * @details This call is used to retrieve information about values to be stored perisistently by the application
 *          after a connection has been terminated. When a new connection is made to the same bond, the values
 *          should be restored using @ref sd_ble_gatts_sys_attr_set.
 *          The data should be read before any new advertising is started, or any new connection established. The connection handle for
 *          the previous now defunct connection will remain valid until a new one is created to allow this API call to refer to it.
 *
 * @param[in]     conn_handle       Connection handle of the recently terminated connection.
 * @param[in]     p_sys_attr_data   Pointer to a buffer where updated information about system attributes will be filled in. NULL can be provided to 
 *                                  obtain the length of the data
 * @param[in,out] p_len             Size of application buffer if p_sys_attr_data is not NULL. Unconditially updated to actual length of system attribute data.
 *
 * @return @ref NRF_SUCCESS Successfully retrieved the system attribute information.
 * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @return @ref NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer.
 */ 
SVCALL(SD_BLE_GATTS_SYS_ATTR_GET, uint32_t, sd_ble_gatts_sys_attr_get(uint16_t conn_handle, uint8_t * const p_sys_attr_data, uint16_t* const p_len)); 

/** @} */

#endif // BLE_GATTS_H__

/**
  @}
*/