GraphicsDisplay / UniGraphic

Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   testUniGraphic_150217 maze_TFT_MMA8451Q TFT_test_frdm-kl25z TFT_test_NUCLEO-F411RE ... more

Inits/TFT_MIPI.h

Committer:
Geremia
Date:
2015-02-15
Revision:
4:12ba0ecc2c1f
Child:
9:1749ae993cfe

File content as of revision 4:12ba0ecc2c1f:

#ifndef MBED_TFT_MIPI_H
#define MBED_TFT_MIPI_H



#include "mbed.h"
#include "TFT.h"

/** Class for (quite)standard MIPI-DBI TypeB (parallel) and TypeC (spi) TFT display controller
* for Ilitek ILI9481, Renesas R61581, Raydium RM68042
* to be copypasted and adapted for other controllers
*/
class TFT_MIPI : public TFT
{
 
 public:

    /** Create a PAR display interface
    * @param displayproto only supports PAR_8
    * @param port GPIO port name to use
    * @param CS pin connected to CS of display
    * @param reset pin connected to RESET of display
    * @param DC pin connected to data/command of display
    * @param WR pin connected to SDI of display
    * @param RD pin connected to RS of display
    * @param name The name used by the parent class to access the interface
    */ 
    TFT_MIPI(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name);
  
    /** Create an SPI display interface
    * @param displayproto only supports SPI_8
    * @param Hz SPI speed in Hz
    * @param mosi SPI pin
    * @param miso SPI pin
    * @param sclk SPI pin
    * @param CS pin connected to CS of display
    * @param reset pin connected to RESET of display
    * @param DC pin connected to data/command of display
    * @param name The name used by the parent class to access the interface
    */ 
    TFT_MIPI(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name);
  

  
protected:
    
    
    /** Init command sequence  
    */
    void init();



};
#endif